CATHODE RAY TOMES

Soul Calibur 2

Soul Calibur II (SC23 Ver. A) (Namco, 2002) · Document · 26 pages · 15 sections · original scan

Page 1

SOUL CALIBUR II Game PCB Kit

Connections

and

Adjustments

Issue 1

Page 2

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 3

NOTICE

MaGicGArteE is a term to describe a copyright protection technology created by Sony Group. This MAGIC GATE mark does not necessarily guarantee compatibily with other products bearing the “MagicGate” trademark.

MaAGIc GATE is a trademark of Sony Corporation.

MaGicGATE est une terme décrivant une technique de protection de copyright créée par Sony Group. MAGIC GATE ne garantit pas nécessairement de compatabilté avec d'autres produits portant la marque de commerce “MagicGate”

MaGiIcGATE est une marque de commerce de Sony Corporation.

The DVD-ROM DISC supplied with the product must not be copied, modified, distributed, or used for purposes other than the operation of the product. Copyright laws protect the contents of the DVD-ROM DISC. Infringement of copyright laws may be subject to criminal penalties.

Do not use the supplied DVD-ROM DISC with other product models or other media formats. Doing so may result in equipment failure.

Page 4

Contents

KIT CONTENTS ........ccscccccecsesesesesscsesesesssenececsesesesesesecsesesesesesscscsesesessacsesesessasssssseseneeaees 5

1.. SPECIFICATIONS. «0:04.00 sicavecssauecnus ses tse canasstscasactasenasavenexesetedsse s0eesie ReveasPadses cate cte oa 7

  • CABINET CONNECTIONS (Standard Jamma)........ccccccccccceseeseeseteteeeeecessseteteeseseees 7
  • CABINET CONNECTIONS (JVS Standard)..........ccccccccscccsescseeseeteeeneesesseteteneesesenee 11
  • FITTING THE DONGLE & MEMORY CARD ..........cccscsesceectseeeeeseseseeneeeeeeseseseeeaes 12
  • FRETTING THE CD-ROM DISG 3. csisccisscsscanscsnesanacsecseasesa secs cevnenincateansestit anit savscaentnaatinas 13
  • ADJUSTMENTSAND SETTINGS .......0.ccccccccccscscccecscseseetecsssssessseeenecsesseseneeeeensenee 15

6-1 Option Switches ...

6-2 Test MOde .0.......ccccccccseceseseeseseseseesssessesesscasasscsesseusasssseeseeseesseseseeseisisesscsesesisesecseeetetees 16

6-2-1 —_ Display TeSt...0:...ccccesoevcseseascarsesensesoactescveesstson sna custonen svvtecnesasneoseorestenteveonscdenedvenria 16

6-2-2 Colour Edit oo... eecceccsesceeeeeeesceeseseseescasssseseeeeeescssseeeeeeeeesesseseseensasassnsesetetesees 18

G-2-3 —- CONVENGONCE. issesissecscssercessssssscstecnescesenvessestecosnsssensiboniicessascensdsunsisecotaveenteotestoneie 18

6-2-4 WMT ACE oneness cceeseseceeeseseeeeeeeesceseseeseseasassnseeseeeecsssteeseescisisscsnseeesisasscsestitecese® 19

6-2-5 Input Test (switch test) .

6-2-6 Game Options 00... cece eneeeeceseeteeeeeseceeeeneseescesenesensceseeeseeeseseeeeee 21

6-2-7 COIN OPHIONS iiss sisciccsssencesssscsscsiscsescssenvessestecosnsssencisoestessosascensssuasisecotaveentsotestonette 22

6-2-8 — SOUN Tet oo. .eeececeeseceeesseseeeseseeseseeseeseeseusasessesseusasessestseseasisssseseseisisassnsesetetesees 23 B22-9 IVS SIAUS secccsscsccssscescncncanaaceciacaogasapucccgsnecessa ven sasceasin cate duogasaabiecegarasesva vee saasexsan ces 23

6-2-10 A.D. S - (Bookkeeping) o..... cece cee ceeees ees eneeeeceseeteeseeseseeneeeeseneceeeeeeees 24

B-2211 Data Coat cscs sissiivecscssscescesnsisstasvisasassns ianiitecsavectescesnsssstatioiee asses sianeitereavectesceuaaits 24

Page 5

KIT CONTENTS

Description Part No Quantity

Soul Calibur 2 PCB Rack AssyXSC2-PCB1
DVD Rom CD DiscXSC2-CDROM1
Jamma (B) PCBXTEK4-JAMMA1

Power Supply Loom 1

RGB Video Loom 1 Rack Assy to Jamma (B) PCB connecting cables RCA (Phono) Audio Loom 1

Data Loom 1

Amp El connectors to 48way Edge Adaptor Loom692000671
Amp El connectors with Flying Leads Loom692000661

Button Decals 1 set

Instruction Card 1

Move List Card 1

Title Board 1

Soul Calibur 2 Promotional Poster 1

Top Flash400007361
Universal Cabinet Side Decal - LHS / RHS400007352
Header Decal400007341
Connection and Adjustment Manual905001381
Page 6

SPECIFICATIONS

COMPATIBILITY: JAMMA STANDARD (with JAMMA (B) PCB)

JAMMA VIDEO STANDARD (JVS)

PCB INPUT POWER: +5v (45%) @ 7A (Min), +12v (5%) @ 2A (Min)

OPERATING Temperature +5°C to +45°C ENVIRONMENT: Humidity 10% to 85% (no condensation)

MONITOR

ORIENTATION Orientation Horizontal (Landscape)

AND SIGNAL: Horizontal Frequency 15kHz/ 31kHz (selectable)

Scanning retrace 15.75 kHz Non-interlace / Interlace 31.5kHz Non-interlace (fixed)

RGB output level At 15 KHZ 0.7V p-p /3.0V p-p (selectable)

At 31 KHZ 0.7V p-p

Composite Sync / Separate Sync (selectable) Vertical sync frequency: 60.0 Hz

Page 7
  • CABINET CONNECTIONS (Standard Jamma)

Option Switches

PCB Rack Assy v ‘c-7 (mi (a (om

CD-ROM Drive

Audio Cable

Data Cable

Jamma (B) PCB

Volume Control

Page 8

The JAMMA (B) PCB is connected to the game cabinet with a 56way Edge Connector (standard JAMMA) and 4 and 10way AMP El Connectors.

JAMMA 56way Connector

10way AMP El Connector

AMP El Connector

Note: Supplied in the Kit is an Amp El connector to 48way extender card adaptor loom for cabinets with an existing 48way connector, and an AMP El connector with flying leads loom for cabinets without a 48way connection.

4 and 10way AMP El Connector with 48way Extender Card Part No. 69200067

~—

4 and 10way AMP El Connector with flying leads Part No.69200066

Page 9

Connections for Standard JAMMA Cabinet

r SOUL CALIBUR 2 JAMMA 56way Edge Connector SOUL CALIBUR 2

Solder SideTerminal NoComponent Side10way AMP El Connector
GNDA1GNDPin NoDescription
GNDB2GND1|GND
+5voltCc3+5volt2
+5voltD4+5volt3
E54 — | P2 Button switch 4
+12voltF6+12volt5
Polarizing KeyG7Polarizing Key6
Coin Counter 2H8 | Coin Counter 17
:98| P14 Button switch 4
L Speaker (-)K10|L Speaker (+)9
Audio (-) (mono)L11. | Audio (+) (mono)10|GND
Video GREENM12 | Video RED
Video SYNCN13 | Video BLUE
SERVICEP | 14|Video GNDSOUL CALIBUR 2
R|TES4way AMP El Connector
Coin Switch 2Ss16 | Coin Switch 1Pin NoDescription
P2 STARTT17|P1 START1
P2 Joystick UPU18|P1 Joystick UP2
P2 Joystick DOWNVv19 | P1 Joystick DOWN3R Speaker (+)
P2 Joystick LEFTWwW20 = |PtJoystick LEFT4R Speaker (-)
P2Joystick RIGHTY21 | P1 Joystick RIGHT
P2 Button switch Sw1Z22 | P1 Button switch Sw1(rorine ep20nea7)
P2 Button switch Sw2a23 | P1 Button switch Sw2(with 48way connector
P2 Button switch Sw3b24 | P1 Button switch Sw3and adaptor PCB)

c 25 a | 2 Connector Loom

GND> | orGND(Part no 69200066)

(with flying leads)

GNDf | 28GNDL

P2 Start switch P1 Start switch P41 Buaton switches P2 8-direction joystick

P2 Button switches

2 3 P1 8-direction joystick —__<4 = aA

P1 Button switch 4 TES ST,,, P2 Button switch 4

Page 10

4w AMP El pin 4

10w AMP El pin 4

10w AMP El pin8 Adaptor for Earlier Tekken Series Cabinets with 48way Edge Connector (Part No 69200067)

PREVIOUS CABINETS

48way Extension Connector

Solder SideTermmal NCompament Sid
)R Speaker (-A24 | B24R Speaker (+)wy AMP El pin

A23 | B23 A22 | B22 A21 | B21

Polarizing KeyA20 | B20Polarizing Key

A19 | B19 A18 | B18

P2 Button switchATBI7

A16 | B16

A15 | B15GND10w AMP El pin 1
Al4 | B14GND10w AMP El pin 1

A13 | B13 A12 | B12 Att | B11 A10 | B10 AQ BO

A8B8GND10w AMP El pin
ATB7GND10w AMP El pin

AG B6

P4 Button switchBBS

A4 | B4 A3 | B3 A2 | B2 At | Bt

Page 11
  • CABINET CONNECTIONS (JVS Standard)

Video Connector

Audio Connectors

Data 1/0 Connector

Page 12
  • FITTING THE DONGLE & MEMORY CARD

The dongle and memory card included in this kit is limited to this game only. DO NOT insert this Dongle in other games. Inserting the Dongle in other games may cause damage.

Ensure that the power is switched OFF before inserting the Dongle.

Dongle cover

Pozi head screw (M3x10)

  • Remove ‘off pozi head screw (M3x10) and remove the Dongle Cover.
  • _ Fit the Dongle to the left hand connector.
  • Fit the Memory Card to the right hand connector.

Left connector Right connector

Dongle Memory Card

  • Refit the Dongle cover and pozi head screw (M3x10)
Page 13
  • FITTING THE CD-ROM DISC

° The CD-ROM Disc must be inserted with the power switched on. To prevent an electric shock, accident or injury, do not touch any parts other than those specified below.

° The supplied CD-ROM Disc is designed exclusively for this product. Never use the CD-ROM Disc in any other product. Do not insert other CD-ROM Discs in the CD-ROM drive of this game.

. The CD-ROM tray retracts automatically after 10 seconds.

  • Press the eject button of the CD-ROM drive to open the tray.

CD-ROM Drive

Access Lamp

Eject Button

Page 14
  • Place the CD-ROM Disc on to the tray, ensuring that the label side (printed surface) is facing away from the Tray.

ig

oY CD-ROM DISC

iy Ensure that the CD-ROM () facing away from the tray

Disc is securely placed on the tray, with the label side

LV

Tray

  • Press the Eject button to retract the Tray in to the unit.
  • Switch the power OFF, wait approx 10 seconds then switch the game back ON.
Page 15

6. ADJUSTMENTS AND SETTINGS

The Game PC Board Assy is fitted with 4 Option Switches.

Option Switches

Volume Control

6-1 Option Switches

Switch 1 is used to change between Test Mode and Game Mode.

ON:Test ModeOFF:Game Mode

Switch 2 is used to set the output level of the video signal.

31kHzON:0.7V p-pOFF:0.7V p-p
15kHzON:0.7V p-pOFF:3.0v P-P

Switch 3 is used to change the monitor Sync Frequency

ON:31kHzOFF:15kHz
Note: When using a 31kHz monitor, set the RGB input of the monitor to 0.7v. If the monitor does not have a setting adjustment, refer to page 17 section 6-2-1 “Display Test”, and change the Contrast and RGB Brightness levels to adjust the brightness.

Switch 4 is used to set the Video Sync Signal

ON:Composite SyncOFF:Seperate Sync
Note: The game must be switched OFF and back ON for changes to switches 2,3, and 4 to take effect.
Page 16

6-2. Test Mode

To enter Test Mode set the Test switch in the cabinet (if fitted) to ON, or if no Test switch is fitted to the cabinet, set Option switch 1 ON

  • NO be et ddd"
Note: The test mode is activated only when the cabinet Test switch or Option switch 1 is moved from OFF to ON. If the game is switched on with either switch in the ON position the Test Mode will not be activated. The switch must be switched OFF and then ON to enter the test mode.

When the Test Mode is entered, the following screen is displayed.

( >)

DISPLAY TEST ~<———__—_+ Monitor Adjustments INPUT TEST ~—————_—_____— Tests all switches

GAME OPTIONS «+ Set Game options COIN OPTIONS —<—————+— Set Price of Play SOUND TEST ~<———_—————___——_ Sound test

JVS STATUS <——_7__ Not used

A.D.S. Bookkeeping DATA CLEAR ~<——_—_—___—_ Data clear EXIT & SAVE<——______+,- Exit from test mode \ Enter : P1-Button1 )

Use the Joystick Up or Down to step through the tests. (The selected test will be displayed in red)

Press the 1 Player Button 1 to enter the selected test.

After making adjustments select EXIT and press the 1 Player Button 1 to return to the above screen. Select another test or select ‘EXIT & SAVE’ and press the 1 Player Button 1 to save the changes and return to the Game Mode.

Note: If ‘EXIT &SAVE’ is not selected and activated, any changes made may not be stored properly. Switching the cabinet Test switch or Option 1 switch OFF does not exit the Test Mode.

Switch the cabinet Test switch or Option 1 switch OFF.

Page 17

6-2-1 Display Test

This test allows the following checks and adjustments to be made.

1. 2. Colour Edit Adjust contrast and brightness of each colour to match video output from the PCB to the Monitor.

Note: This adjustment should only be made if the correct picture quality cannot be achieved by using the normal monitor adjustments. Convergence Check and adjust the size, position and distortion of the screen image. Interlace Check Switches between interlaced and non-interlaced display. (Only with 15kHz video signal).

= —_wo—- Contrast : OO Bright RR: OO Overall contrast Brightness (red) Brightness (green) Brightness (blue) Bright G Bright 8: OO DISPLAY TEST Color bar Color bar (white)

Color bar (red)

Color bar (green)

Color bar (blue) En Ll as CS Ll as Reset Colour Edit values to factory defaults Previous Color P1-Button4 EXIT color edit P1-Button3 Colour Edit ON /OFF NEXT P1-Button1 Select next test pattern (EXIT P1-Start Retum to test menu screen S

Select display Test from the Test Menu Screen, the following screen is displayed. Each time the 1P Button 3 is pressed the Colour Edit adjustment box is turned ON or OFF.

Va

DISPLAY TEST Color bar Color bar (white)

Color bar (red)

Color bar (green)

Color bar (blue) li

ENTER color edit P1-Button3 Colour Edit ON /OFF NEXT P1-Button1 Select to next test pattern

EX! P1-Start

Return test menu screen

Press the 1P Button 1 to step to the next test function COLOUR BAR CONVERGENCE INTERLACE

e

Page 18

6-2-2. Colour Edit

1 Ensure that the Colour Edit Adjustment Box is showing. (Press P1 Button 3 if the Adjustment box is not displayed.

  • Use the Joystick UP/DOWN to step to the required adjustment. (Contrast, Brightness (red), Brightness (green), Brightness (blue)).
  • Use the Joystick LEFT/RIGHT to adjust the value.
  • When all adjustments have been made, press P1 Button 1 to step to the Convergence Test or P1 Start Button to return to the Main Test Menu screen

6-2-3 Convergence

Use this screen to adjust the geometry (height, width , etc.) of the Monitor.

DISPLAY TEST. ) Convergence | [| TP interace T[o]} Contrast: 150 BrightR : 100 I TT ]} erignte : 100 Bright B_: 100

Previous Color:P1-Button4
EXIT color edit:P1-Button3
NEXT:P1-Button1
EXIT:P1-Start)

When all adjustments have been made, press P1 Button 1 to step to the Interlace Test or P1 Start Button to return to the Main Test Menu screen.

Page 19

6-2-4

Interlace Mode: Interlace

This mode provides more detailed and smoother graphics than the non-interlaced mode. This is achieved by shifting the picture display a half line in the vertical direction every other frame scan, so doubling the vertical resolution without changing the horizontal/vertical frequency.

Use this display if the interlace mode results in flicker over the entire screen display. In the non-interlaced mode, there is no shift of the display position, and the display remains

1 Ensure that the Colour Edit Adjustment Box is showing. (Press P1 Button 3

Interlace mode

Reset Colour Edit values to factory defaults Colour Edit ON /OFF Select next test pattern _) Return to test menu screen

Interlace mode

Reset Colour Edit values to factory defaults Colour Edit ON /OFF Select next test pattern Non-Interlaced Mode:

constant every time.

if the Adjustment box is not displayed.)

  • Use the Joystick LEFT/RIGHT to change Interlace/Non Interlace.

r > interlace Contrast : 150 BrightR : 100 DISPLAY TEST Bright: 100 Interlace check BrightB_: 100

Previous Color P1-Button4 EXIT color edit P1-Button3 NEXT P1-Button’ (Exit P1-Start

Interlace mode is set ON

ir > Non Interlace Contrast : 150 Bright R : 100 DISPLAY TEST Bright G : 100 Interlace check Bright B_: 100

Previous Color P1-Button4 EXIT color edit P1-Button3 NEXT P1-Button? \__ Exit P1-Start _) Return to test menu screen

Interlace mode is set OFF

  • | When the adjustment has been made, press P1 Button 1 to step back to the Colour Edit Test or P1 Start Button to return to the Main Test Menu screen.
Page 20

6-2-5 Input Test (switch test)

Select Input Test from the Main Test Menu. The following screen is displayed.

P14 Start switch

Service switch on + the cabinet (if fitted)

P1 8-direction joystick

P1 Button switches

DIP switches P2 Start switch

(— >) INPUT TEST _o 1P 2P.

Start Start

t+ Service Service Up Up Down Down

Button Button2 Button3 Button Button2 Button3 | Button4 - ----------- Button4 - - ---------- ~_]

DIPsw 1:OFF 2:OFF 3:OFF 4:OFF [—" COIN1:000 COIN2:000

EXIT: P1-Button1&2

Left Left

Right Right

To return to test menu screen P2 8-direction joystick

P2 Button switches

Coin signal count (Default: 0)

Each time a switch is operated, the corresponding item on the display will change colour to red.

When testing is completed, press P1 Buttons 1 and 2 together to return to the Main Test Menu screen.

Page 21

Game Options

  • Select Game Options from the Main Test Menu. The following screen is displayed.

GAME OPTIONS < Defaults in Green >

  • |>DIFFICULTY LEVEL : Normal
  • | FIGHT COUNT<ARCADE> : 2 () | FIGHT COUNT<VS GAME> : 2
  • | LIFE BAR<ARCADE> : 100
  • | LIFE BAR<VS GAME> : 100 () | ROUND TIME<ARCADE> : 50sec
  • | ROUND TIME<TRAINING> : Smin
  • | NEUTRAL GUARD : On () | CHARACTER CHANGE AT CONTINUE : Off (@) | CHARACTER CHANGE AT VS GAME : Off
  • | SOUND IN ATTRACT MODE : On () | STAGE SELECT<VS GAME> : Off
  • | EVENT MODE : Off
  • | HIT COLOR : Mild
  • | CHALLENGER AT TRAINING : On
  • | CHALLENGER AT CONQUEST : On Modify : P1-Left/Right Exit: P1-Start
  • Use the Joystick UP/DOWN to step to the required adjustment.
  • Use the Joystick LEFT/RIGHT to adjust the value.
  • When all adjustments have been made, press P1 Start Button to return to the Main Test Menu screen.
  • Dificuty Level <Arcade> (degree of game dificulty) Easy [ Nomal | Hard | VeryHard [ UltaHard [Exemely Hard
  • Fight Count <Arcade> (number of rounds required to win in 1-player made
12346

(©) Fight Count <VS game > (numberof rounds required to win the game in 1 competion mode)

12346

() Life BarcArcada> (maximum level of energy guage in t-player mod)

a00700110720
  • Life bar <VS gama > (maximum level of energy guage in competion mode)
a0Ey7001020
  • Round Time<Arcade> (me init [seconds] per round)
oeoeoeExESasec
  • Round Time<Training> (Une lit [minutes] in Training mode)
Sain[amin| Smin‘minTrin‘min‘minomin
  • Neural guard ( guard activated with lover in neutral) ON OFF (0 Character change at continue (change of character for continued game) ‘ON OFF ) Character change al VS game (change of character al the beginning of compatiton game boughtin by opponent) ON OFF (& Sound in Atract mode ON OFF () Siage Seleck<VS game> (selection of stage atthe beginning of competition mode) ON OFF ((m) Event mode (Forced termination of game play ater winner in competion game is determined) ON OFF
  • Hit colour (colour of graphic effects of attacks Fit) Normal ‘id (c)_ Challenger at Waining (enablesiGisables sang fr buy-in in Training made) ON OFF (©) Challenger at Conquest (enables/aisabies seting for buyin in Conquest mode) ‘ON OFF
  • “Challenger at Conquest” (p) is not displayed until the Conquest mode becomes available a certain number of days after the date of installation.
Page 22

6-2-7 Coin Options

  • Select Coin Options from the Main Test Menu. The following screen is displayed.

( COIN OPTIONS Defaults in Green

  • | > Start cost 1 COIN to START
(b)Continue cost :1 COIN to CONTINUE
  • Coin chute 1 mechanical value : ‘coin count as 1 COIN
  • Coin chute 2 mechanical value : ‘coin count as 1 COIN
(e)Credit modecommon
()Coin counter1 counter
(9)Free playNO

Modify : P1-Left/Right Exit : P1-Start

  • Use the Joystick UP/DOWN to step to the required adjustment.
  • Use the Joystick LEFT/RIGHT to adjust the value.
  • When all adjustments have been made, press P1 Start Button to return to the Main Test Menu screen
Note: When using a CashFlow acceptor ensure that Cost and Coin Chute values are set to 1
  • Start cost (number of credits to start a game)
23456789

H

  • Continue cost (number of credits to continue a game - must be equal to or smaller than start cost)
23456789
  • Coin chute 1 mechanical value (number of credits for each coin)
23456789
  • Coin chute 2 mechanical value (number of credits for each coin)
23456789

}

  • Credit Mode (credit storage and use)

COMMON . Different credit accounts are Credits are stored as a single : established. account regardles of which coin switch or start switch is operated Credits from coin 1 are used by player 1 and credits from coin 2 are used by player 2

) Coin counter (assignment of coin meters)

1 COUNTER 2 COUNTERS Both coin switches share one | Each coin switch has its own coin counter coin counter

  • Free play

YES (no coins NO (coins required) required)

Page 23

6-2-8 Sound Test

  • Select Sound Test from the Main Test Menu. The following screen is displayed.

( SOUND TEST )

POSITION:off <—_______________+_ Displays which speaker is playing

SPEAKER:stereo ~—_________________1._ Displays monaural/stereo setting

Check Sound:P1-Button 1How to activate test sound
Select SOUND mode: P1-Left / RightHow to change stereo/monaural setting
EXIT: P1-StartHow to return to test menu screen

XL S

  • Press 1P Button 1 to conduct a stereo check. Sound will be produced from the left speaker only, then the right speaker only, then both speakers together. The display will show which speaker is active.
  • Use the Joystick LEFT/RIGHT to change between STEREO/MONO sound.
  • When testing has been completed, press P1 Start Button to return to the Main Test Menu screen

6-2-9 JVS Status

This test is inactive and not used on JAMMA system cabinets, it is only operational on JVS system cabinets.

Page 24

6-2-10 A.D. S - (Bookkeeping)

This screen is used to display bookkeeping data such as: Total Coins, Game Ratios and Playing Times etc.

  • Select Bookkeeping from the Main Test Menu and press P1 Button 1 to display the information.
  • Press P1 Start Button to return to the Main Test Menu screen.

6-2-11 Data Clear

  • Select Data Clear from the Main Test Menu and press P1 Button 1. The following screen is displayed.

( DATA CLEAR

  • | Exit
  • | Bookkeeping data clear
  • | Ranking data clear
  • | Set defaults all options
  • | Allclear

CLEAR: P1-Button1 \ EXIT P1-Start

  • Use the Joystick UP/DOWN to step to the required adjustment.
  • Press P1 button 1 to clear the selected data.
  • When all adjustments have been made, press P1 Start Button to return to the Main Test Menu screen
  • Returns to the Main Test Menu.
  • Resets all Bookkeeping data to zero
  • Resets all ranking data such as record of consecutive wins to factory default
  • Resets all Game and Coin Options to factory default.
  • Executes (b), (c) and (d) all at once plus the data relating to the *Conquest mode. *The Conquest mode becomes available after a certain number of days from date of installation.
Page 25

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 26

Copies of Namco Game Manuals can be downloaded from our website: www.namco.co.uk They are located under Components Distribution

For all Parts or Technical Support contact:

Brent Electronic, Namco House, Units 5-8, Acton Park Estate, The Vale, London. W3 7QE

www.brentelectronic.co.uk

For Technical Support, Warranty and

Advance Replacement Parts:- J +44 (0) 20 8324 6120

For Consumable Parts:- J +44 (0) 20 8324 6102

Fax for both:- fy +44 (0) 20 8324 6126