CATHODE RAY TOMES

Multigame 400 in 1 Gamebox Jamma Installation & User Manual

Multigame 400 in 1 (GAMEBOX, 2004) · Installation · 24 pages · 14 sections · original scan

Page 1

Announce

This user manual provides the user to reference only, don’t provide the guarantee of any form, the user manual changes to forgive not to go another circular.

We don’ t do any notify if the user manual had been changed.

GAMEBOX 2004

Page 2

Security Warning GAMEBOX

For the longest use of the machine and reduce the suddenness, please for god’s sake of the list below:

The assemble inside the machine contain precise parts, conveyance and using is forbids to rough it, vibrate and collide. + The attention keeps the machine to cooling, forbid to | cover the fan, If the fan working incorrectly, please | stop using it immediately, send it for checking. Forbid to push or pull any connect line when power on. |

Circuit board to the static electricity very sensitive, | forbid to touch the electric circuit module . « Checking if the power supply voltage is match to thes region where you using it.

Page 3

Intro GAMEBOX

Announce:

Security Waruing:

Intro

Functions

Subassembly

Install Explain Before Install++:s++esstsseerceeeereee ces eteeeeeceeeseeenreresessssecesas ens 5 Basic compose Introssssrtsesestestesertssesceteseetesateseerseenssanaes 5 Quick Install manual -++++sessessesseeseseseeeceesateeseneeseseneetaee 6

Notice of Installess++ssceeseseeseseestnseessreversneesstesseteneneseneees 6

User manual Boot Machiness:+-+ssseessesseesseescsesssaeestecenetesneresssessseoesesees B

Select Game cistsecestecesesscesseseeesesseecessesesseessereeserseerereeee &

Quit Game (Back to main menu) crrrreersseeereseeeeeereceteenene &

Shutdown Machiness::stsecsesestessseteserseecneeneeneeeneetsteeenseeere g

System Setting

Function key Siilint RRR ey 13

System setting Menu(Advance Setting)-++o+tsresettercecetectenesene 13

Game Debug Mode(Advance Setting) srs:stssrssssstereesssteeeeeteene \7 Machine Setting:+:+++erssseeteeetseeseesssesereesetenssneeessreeesee DT Regulation-+:++---+seeessecesseeseseertenece rete steeetensetennertsneesteennes 22. The difficulty answer ss-re-sssrssseseetseesetesesesteeseseneteceesteeneeteens 23

Page 4

Intro GAMEBOX

Functions

  • Include hunders of games » Typical JAMMA interface
  • MuitiPlayer . Fulling coins memory . 3 Seconds to mainmenu

Modiile contents

  • Host

+ Power Supply

+ AC power line

+ Lplank

+ User manual

+ 20P ATX Line (accessories )

  • Aset of an advertisement of machine
  • Game list
Page 5

Install Explain GAMEBOX

Before inistall

  • Put the host in the anti-electrostatic packing bag before install.
  • Hold the mainboard edge carefully, don’ t tough the accessories of the mainboard.
  • Face up the side which there are components, and put it into the box.
  • Do not distort or heavy pressure circuit board. 5, When the host working, the periphery pleases not to place the miscellaneous articles or objects, and please reserve space for cooling. Basic compose Intro
  • JAMMA 28P 2. 20P ATX Power interface
  • Power Supply 4. AC Power line
  • Function keys 6. Cooling Fan
  • Power LED 8. System set(DIP)
Page 6

Install Explain GAMEBOX

Quick Install Manual

Basic Install Sequence: (See the picture above) LL.

Ben Connect to the 20P ATX Power Interface (you can also plug the Power 20P ATX into the Machine). Plug in the JAMMA 28P pin. Connect the AC power line in to the power supply.. Make sure the power box voltage is the same with the local region. then Power on . Install Warning Notice the direction of the JAMMA 28P, do not put anti. When pluging the 20P ATX power, make it was align, or it should be broken. If it is plug in the machine directly, make sure it plugs ok.. The power supply of the machine and the power box of the cabinet must be connect into the same power supply, and cut the power at the same time (see the picture below). This is yery important, or the machine should not working correctly.

Page 7

GAMEBOX

Install Explain

@ The B14 of JAMMA 28P(the soldering tin in) link to the same switch of the ground. The function is the same as "Function Key K5"(the KS's function please see page 13 "function key intro" SJAMMA 28P

Top (A) Bottom (B)

GNDOlGND
GND02GND
+5V03+5V
+5V04+5V

+1206 = +1av

SOUND+10— SOUND-

1L Red 12 Blue 13

COIN(LP) 16 START(IP) 17 — START(2P)

Up(IP)18Up (2p)
Down(1P)19— DoN(2P)
Left (IP)20Left (2P)
Right (IP)21Right (2P)
SWL(LP)22Swi (2P)

sw2(1P) 23 = sw2(2P) SW3(1P) 24 — SW3(2P) SW4(1P) 25 — sW4(2P)

SW5(IP)26— SH5(2P)
SW6(1P)27— SW6(2P)
GND28GND
Page 8

GAMEBOX User manual

tin Machine

Boot the machine, and the screen should not synchronization. After about 20 seconds, the game menu was show (if the system setting switch DIP-2 set to ON(see page 10 “DIP-2, Game mode selection” ), the last game should run automatic. The game loading should spend some time depend on the game, there is no image on the screen when loading). Garis" Sete

  • Enter the main menu, use joystick to select game. Boo

Joystick up down to select a game. Joystick left right to select a page.

  • After coin, and press ip’ s start, it should enter the game loading, don’ t coin when game loading. The loading time depend on the game.

é t to main ment)

Way 1: Press Ki (see page 13 “Function key intro” ) Way 2: Press IP’ s start for 3 seconds, (see page 11 “DIP-8 start back to menu” )) Way 3: Press B14 (see page 7 “Install Warning”

Shutting down machine

Quit current game and back to the main menu. At last power off (make sure 2 parts of power are off).

Page 9

System setting GAMEBOX

The user could set coin,diffcult level on “System setting switch (DIP)”. The Advanced user could use “System setting menu” or “Game debug mode” to set the params of each game. We advise the normal just use “Systen Setting switch (DIP)” to set the params.

Notice! “Game setting menu” and “Game debug Mode” could set many system function, it could cause your machine do not working.

Function explain yx DIP—1 1 L_ Function ON System Test_(Factory Reset) OFF Game Mode (Factory Default)

When the machine error even could not be solving by rest, this function could check and fix system (Factory Reset could fix system ).

Page 10

System Setting GAMEBOX

Power off the machine, and set the DIP-1 to ON, then boot the machine and it should go into the testing mode (see the picture below) .

( Monitor check, 1/0 check. Sound check.

Monitor check: Test screen ( Use for screen test) W/O check: ‘Test joystick ( Use for joystick test ) Sound check: Test sound (Use for sound test)

PS: Press joystick right and press key 1 to quit J/O Check.

yx DIP—2, Game mode select 2 Function | __ ON Normal Arcade Mode OFF User Mode (Default> | Normal Arcade Mode; After boot, it loads a game automatic. Advice to set DIP-8 to ON User Mode: After boot, Go in to the game select menu. Advice to set DIP-8 to ON.

Page 11

System setting GAMEBOX

vx DIP—3, DIP—4, Game level setting

34Game Level
ONONVery Hard

ON OFF Hard

OFF ON Normal

OFF OFF Easy (Default)

  • DIP—5, Control Function Key (K1 ~ K4) 5 Function ON K1 ~ K4 Enabled OFF Ki ~K4Diasble (Default)
  • DIP—6, DIP—7, Coin Setting
67Function
ONON..

OFF OFF 1 Coin 1 Credit (Default)

OFFON2 Coin 1 Credit
ONOFF1 Coin 2 Credit
  • DIP—8, Start Key back to menu 8 Function ON Diasble OFF Enabled (Default)

The machine either to use K5 back to main menu, or press 1P start 3 seconds to back to main menu too. DIP—8 to enabled the function. When ON, the function disable.

PS. + Need reboot to function. %* Don’ t need.

Page 12

System setting GAMEBOX

Setting Example (Only the function which need to reboot) 1.

2.

3.

  • Appear a picture (see below), up side is old, down side is new.

5. Shutdown machine,

Set DIP-1 to DIP -8.

Boot Machine.

Push 1P ST@RT to Continue...

Make use which DIP is you need, and press 1P START to confirm. Then the main menu appear, the setting is OK.

The DIP setting is used to all games.

Page 13

System setting (Advance) GAMEBOX

Funetion key intro

oe @ ®@ KL -K2 KS. KA KS

20 Om

K1 Confirm system setting K2_ System setting

K3 Game Debug Mode K4_ Reset game

KS5 Back to main menu

System settin; enw

Basic Function:

  • When the game running, press K2 to run the system setting menu.
  • Use joystick to select the DIP Switches, press K1 to enter.
  • Use joystick the select the function.
  • Press KS for back to last menu level, and back to game.
  • Press K4 to reset game.
Page 14

System Setting (Advance) GAMEBOX

We make “64" Street” as a example, other game is similar. Press K2 to enter system menu. System setting menu : oa C8 GER 2

BUTS 228 23)

Input (general)

Input (this game)

Dip Switches

Bookkeeping Info

Game Information

Game History

Reset Game

Return to Game

Page 15

System Setting (Advance) GAMEBOX

Dip Switches Move to “Dip Switches” , press K1, Dip Switches

Coin A Coin B (X) Coin/(X) Credit is coin N to play N time. Such as 1 Coin/1 Credit, 2 Coin/1 Credit, 1Coin/2 Credit. Flip screen On off (Factory setting)

Demo Sounds On (Factory setting) off

Page 16

System Setting (Advance) GAMEBOX

Allow Continue On (Factory setting) off

Difficulty Easy Normal (Factory setting) Hard

Hardest

Lives

factory setting 3 Lives.

Service Mode On off (Factory setting)

Return to Game Select this to back to game

| Notice: Only quiting game to save setting. Don’ t power off before quit |

game,

Page 17

GAMEBOX System setting (Advance)

There is no “Dip Switches” in some game, so you can use Game debug Mode.

Active Game Debug Mode Way 1, If there is “Dip Switches” in menu.

  • Set “Service Mode” to ON.
  • Press K4 to reset game. Way 2, If there is no “Dip Switches” in menu. Press K3, and 2 mode should be appear: a. Nothing appear, pres K4 reset. b. Into Service mode.

Quit Debug Mode Way 1, Set “Service Mode” Of “Dip Switches” to OFF, press K4. Way 2, Press K3(only once), then press K4.

| Notice: Using debug mode must be according to the screen.

We use game “Alien VS Perdator” to show how the debug mode use. Basic process: Up down to select item, press 1p’s fire to set, press 1P and 2P’sstart to back to previous menu, .

Page 18

System Setting (Advance ) GAMEBOX

Alien VS Perdator

ONLY ONE PLAYER

CREDITS 34

“Dip Switches” . TEST

inerur

ouTPeuT There is

yo

@ SOUND

COLOR

DOT CROSS HATCH

CONFIGURATION

‘SCF ear oausa

SCROLL, @

* =]

44 EMORY CHECK

12 EXIT

SELECT 4P UP OR pow STAR if SHOT +

Select CONFIGURATION

Page 19

System Setting (Advance) GAMEBOX

CONFIGURATION (AC)

URATION MENU

2 GAME

SELECT = 1P UP OR DOWN START 1P SHOT +

EXIT = 1PZ2P-START

SYSTEM

SYSTEM CONFIGURATION

ose 41 COIN 7 CREDIT

CONTINUE ON

MONETOR FLIP OFF

DEMO SOUND OFF

SOUND MODE STEREO (© SOUND)

PLAYER MODE 2 PLAYERS 1 CHUTER MODE

LANGUAGE ENGLISH

FACTORY SETTING

exit

LECT OPTION = 1P UP OR pot

MODIFY SETTING = 1P LEFT OR RIGHT

Page 20

System Setting (Advance) GAMEBOX

COIN

CONTINUE

MONITOR FLIP

DEMO SOUND

PLAYER MODE

LANGUAGE

FACTORY SETTING EXIT

GAME

GAME CONFIGURATION

4 CONTINU

ECT OPTION 1P UP OF DOWN

MODIFY SETTING 1P LEFT Of RIGHT

DIFFICULTY FACTORY SETTING

EXIT

Notice:

  • The setting does not save before “EXIT”
  • Maybe some game could not be set.

ss

Page 21

System setting (Advance) GAMEBOX

Set “System setting DIP” DIP--1 to ON, then press K5, see the picture below, then press Start to Reset.

Push 1P START begin

Then wait until the picture below. Shutdown and set the DYP-1 to OFF and but again.

SYSTEM RESET TO COMPLETE ¢

PLEASE DIP-1 TO

Page 22

GAMEBOX lotice

i. Please read the instruction before your install.

2, Don’t store it in the wet and dust environments; difference in temperature

will be easy to breakage.

Please set it on solid ground, pw Please turn off the power before your move it.

Please make sure the power is off before you take out any signal wire. a

After choice the programs don’t press the K5 key before the loading is

finished. If error press 1P “start” button or Power key reboot.

  • Don’t press any button until your see the menu when you turn on the power.
  • If the fan does not work correctly, turn off the power at once and send it to the fix center.
  • If any error could not be solving, please contact the retainer.

eo | Warning again: | The 2 power supply must be set in the same source, power of and power off must be the same time.

:

L

Page 23

Qi A:

Q2:

Q3:

Q4:

Q5:

Q6: : Every time I run some game it go to the setting mode. A: senwee GAMEBOX

: Not any responding after boot Is the fan work? Ifit not work, is the power ok? Check the power line. If it works, shutdown and wait for minutes and boot again.

The image is not synchronization. Is the power LED work? Not work: Is the power ok? Check the power line. Work: Check the signal line, and the JAMMA 28P Pin.

After booting, it runs the game directly, and I want the game menu. check if DIP—2 on? Check DIP—2. (See page 10 “System setting DIP”)

No sound. In the menu, there is 10 sound. In the game, make sure you had tum on the sound. Check the volume.

Hang. Is the voltage tranquilization, try reboot. Is the fan work? Check the fan. Not work: Check if the fan crash by something. Work: If the problem appears frequency, check the HARD DISK.

Check if the game set to the debug mode. (See page 17,”Game debug mode”-“Quit debug mode”)

Page 24

io heh} GABON Q7: There is a red image in the menu. A: That was reading error. It cause by when a game was reading the press the ESC key. Reboot or press 1P’s start should work.

Q8: Why I pressing the 1P’s start button, but it can quit to the menu? A: How long you had pressed? You must press more than 3 seconds. B: Check if the DIP-8 was ON (see page 10, “DIP-8, Start button quit to menu”)

Q9: Oh my god! I set all the thing in mix! A: Set the DIP-1 On, it should restore factory setting. (See page 9, “system seating dip)

Q10: I want to check if all keys are functioning. A: You should use “system test”. Set DIP-1 to ON, and reboot the machine then you can test. (See page 9, system setting switch)

| please contact the dealer directly. Or go to http://www. gamebox. cc for more information.