CATHODE RAY TOMES

Dig Dug Customs Chips

Dig Dug (mini arcade) (Basic Fun, 2018) · Document · 1 pages · original scan

Page 1

DIG DUG CUSTOM CHIPS

99 Video Ram Addresser

Allows RAM to be addressed by CPU and Sync chain. Requires CPU address bus to be tri-state during 2H high.

g2 Universal Shift Register

Can be set up for 4 4-bit parallel to serial converters or 2 8-bit parallel to serial converters. All registers use 1 set of control signals. Can shift either direction.

£4 Motion Object Controller

Generates the strobes and RAM addresses for the motion objects. (MOC 24 style)

96 Custom 50 Controller

Interfaces between CPU and Custom 50's. (Custom 4 bit_microprocessors) Commands and data are transfered via the data bus. C/D selects command or data. Part of the custom 50 data bus is address and part is data (apparently).

97 SYNC Generator

Takes 6 MHZ and generates all horizontal and vertical_timing signals. More than 1 can be used in a system using HRESET and VRESET.

51 Coin I/0 Controller

This custom microprocessor handles I/0 (R/W).

53 Steering Controller

This custom microprocessor handles inputs (for Dig Dug). It also can apparently scan keyboards and handles steering controls. 8 different modes.