Virtua Tennis
Virtua Tennis (Sega, 2000) · Manual · 71 pages · 65 sections · original scan
Ist PRINTING JAN 00
SEGA
SEGA PROFESSIONAL TENNIS
NAOMI CABINET VERSION
OWNER’S MANUAL
SEGA ENTERPRISES, INC. USA
MANUAL NO. 999-0891
Warranty
Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.
Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor.
Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.
Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.
This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above.
TABLE OF CONTENTS
INTRODUCTION OF THE OWNERS MANUAL GENERAL PRECAUTIONS NAWHRWNE . PRECAUTIONS TO BE HEEDED FOR OPERATION . NAME OF PARTS . ACCESSORIES . ASSEMBLY AND INSTALLATION . PRECAUTIONS TO BE HEEDED WHEN MOVING MACHINE . CONTENTS OF GAME . EXPLANATION OF TEST AND DATA DISPLAY 7-1 SWITCH UNIT AND COIN METER 7-2 SYSTEM TEST MODE 7-3 GAME TEST MODE 7-4 INPUT TEST 7-5 SOUND TEST 7-6 C.R.T. TEST -7 OUTPUT TEST -8 GAME ASSIGNMENTS -9 COIN ASSIGNMENTS -10 BOOKKEEPING 7-11 BACKUP DATA CLEAR AANA
- CONTROL PANEL 8-1 REPLACING THE CONTROL PANEL 8-2 REPLACING THE INSTRUCTION SHEET
- COIN SELECTOR 10. MONITOR 10-1 MONITOR ADJUSTMENT 10-2 VERTICAL/HORIZONTAL TRANSPOSITION . REPLACEMENT OF FLUORESCENT LAMP 11-1 REPLACEMENT OF FLUORESCENT LAMP . PERIODIC INSPECTION TABLE . TROUBLESHOOTING . GAME BOARD 16-1 REMOVING THE GAME BOARD 16-2 COMPOSITION OF THE GAME BOARD . DESIGN RELATED PARTS . PARTS LIST . WIRING DIAGRAMS
Installation space: SPECIFICATIONS
38 in.(L) x 30 in.(W)
Height: 82 in.
Weight: Approx. 274 lbs.
Power maximum current: 2.24 Amp AC 120V 60 Hz
MONITOR: 29” NANAO MONITOR
INTRODUCTION OF THE OWNERS MANUAL
SEGA ENTERPRISES, LTD., has for more than 30 years been supplying various innovative and popular amusement products to the world market. This Owners Manual is intended to provide detailed descriptions together with all the necessary installation, game settings and parts ordering information related to VIRTUA NBA U/R Naomi Cabinet type, a new SEGA product.
This manual is intended for those who have knowledge of electricity and technical expertise, especially in ICs, CRTs, microprocessors, and circuit boards. Read this manual carefully to acquire sufficient knowledge before working on the machine. Should there be a malfunction, non-technical personnel should under no circumstances touch the interior system. Should the need arise, contact our main office, or the closest branch office listed below.
SEGA ENTERPRISES, INC. (USA) Customer Service 45133 Industrial Drive Fremont, CA 94538 Phone 415-701-6580 Fax 415-701-6594 7:30 am - 4:00 pm, Pacific Standard Time Monday thru Friday
General Precautions
Follow Instructions: All operating and use instructions should be followed. Attachments: Do not use attachments not recommended by the product manufacturer as they may cause hazards. Accessories: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use only mounting accessories recommended by the manufacturer. Moving the Product: This product should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product to overturn. Ventilation: Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating; these openings must not be blocked or covered. The openings should never be blocked by placing the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
Power Sources: This product should be operated only from the type of power source indicated on the marking label. Tf you are not sure of the type of power supply to your location, consult your local power company. For products intended to operate from battery power or other sources, refer to the operating instructions. Grounding or Polarization: This product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. Power Cord Protection: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. Overloading: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Servicing: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage Requiring Ser vice: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
- If the power cord or plug is damaged;
- If liquid has been spilled, or objects have fallen into the product;
- If the product has been exposed to rain or water;
- If the product does not operate normally when following the operating instructions. Adjust only those controls that are explained in the operating instructions. An improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation;
- If the product has been dropped or damaged in any way;
- When the product exhibits a distinct change in performance; this indicates a need for service. Replacement Parts: When replacement parts are required, be sure the service technician has used replacements parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Heat: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
Lithium Battery- Dispose of batteries only in accordance with the battery manufacturer’s recommendations. Do not dispose in an open flame condition, since the battery may explode. Cleaning: When cleaning the monitor glass, use water or glass cleaner and a soft cloth. Do not apply chemicals such as benzine, thinner, etc. Location: This an indoor game machine, DO NOT install it outside. To ensure proper usage, avoid installing indoors in the places mentioned below:
- Places subject to rain/water leakage, or condensation due to humidity; In close proximity to a potential wet area;
- Locations receiving direct sunlight;
- Places close to heating units or hot air; eIn the vicinity of highly inflammable/volatile chemicals or hazardous matter;
- On sloped surfaces; ¢ In the vicinity of emergency response facilities such as fire exits and fire extinguishers;
- Places subject to any type of violent impact;
- Dusty places.
INSTALLATION PRECAUTIONS
- Verify the amperage of the branch circuit outlet before plugging in the power plug. Do not overload the circuit.
¢ Avoid using an extension cord. If one is required, use an extension cord of type SJT, 16/3 AWG rated min. 120 VAC, 7A.
- Moving this unit requires a minimum clearance (of doors, etc.) of 32” (W) by 77” (H). ¢ For the operation of this machine, secure a minimum area of 32” (W) by 42”(D).
REGULATORY APPROVALS
This game has been tested and found to comply with the Federal Communications Commission Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This game has been tested and listed by Underwriters Laboratories, Inc., to ANSI/UL22.
LISTED
5K92
AMUSEMENT MACHINE
1 . PRECAUTIONS TO BE HEEDED FOR OPERATION
In order to prevent accidents, be sure to comply with the following points before and during operation.
PRECAUTIONS TO BE HEEDED FOR OPERATION BEFORE STARTING THE OPERATION
@ In order to avoid accidents, check the following before starting the operation: Check if all of the adjusters are in contact with the surface. If they are not, the cabinet can move and cause an accident.
Ensure that all of the Adjusters are in contact with the floor. Ensure that the 2 Rear Casters are in contact with the surface (floor).
Do not climb on the product. Climbing on the product can cause falling down accidents. To check the top portion of the product, use a step. @ To avoid electric shock, check to see if door & cover parts are closed.
@ To avoid electric shock, short circuit and or parts damage, do not put the following items on or in the periphery of the product:
@ Flower vases, flower pots, cups, water tanks, cosmetics, and receptacles/ containers/vessels containing chemicals and water.
To avoid injury, be sure to provide sufficient space by considering the potentially crowded situation at the installation location. Insufficient installation space can cause the player to come into contact with or hit others
PRECAUTIONS TO BE HEEDED DURING OPERATION
- Intoxicated persons
- Those who have high blood pressure or heart problems.
- Those who have experienced muscle convulsion or loss of consciousness when playing video games, etc.
- Persons susceptible to motion sickness.
- Persons whose acts runs counter to the products warning displays.
- Instruct those who wear high-heeled shoes to refrain from playing the game by explaining that playing the game with highheeled shoes is very dangerous and likely to cause a potentially hazardous situation.
@ To avoid electric shock and short circuit, do not allow customers to put hands and fingers or extraneous matter in openings of the product or small openings in or around doors. @ To avoid electric shock and short circuit, do not allow the customers to unplug the power plug without a justifiable reason. @ Although this product has the accident preventive covering attached to potentially hazardous places where hand and fingers could be caught, small children are unable to perceive hazards. Use care so that small children do not come close to the product when in play. @ Immediately stop such violent acts as hitting and kicking the product. Such violent acts can cause parts damage and/or falling down, resulting in injury due to fragments and falling down.
2 .NAME OF PARTS
CONTROL PANEL
COMMUNICATION PORT
GAME SPECIFICATIONS WIDTH in. LENGTH in. HEIGHT in. WEIGHT Ibs.
DURING SHIPPING 40” x 70” x 100” ~ 425 LBS. CABINET 30” XxX 41” XxX 7m” 325 LBS.
BILLBOARD 30” x 0.5” x 12” 2 LBS.
WHEN ASSEMBLED 30” Xx 58” x 88” 380 LBS.
. ACCESSORIES
DESCRIPTION OWNERS MANUAL
Part No. (Qty.) 999-0891
Figures
If Part No. has no description, the Number has not been registered or can not be registered. Such a part may not be obtainable even if the customer desires to purchase it. Therefore, ensure that the part is in safekeeping with you. KEY MASTER KEY 220-5576 (2) (2) For opening/closing For the CASHBOX DOOR the doors
TAMPERPROOF WRENCH M8 540-0009-01 (1) TOOL
THE SHIPMENT METHOD DESCRIBED BELOW APPLIES TO ALL ‘MODEL 3’ OR ‘NAOMI’ BOARDS CONTAINED
WARNING! IN THE FOLLOWING GAMES:
LOST WORLD, VIRTUA FIGHTER 3, SUPER GT, SEGA BASS FISHING, STRIKER 2 HARLEY DAVIDSON,
RALLY 2, DAYTONA 2, DIRT DEVILS, HOUSE OF THE DEAD 2, OCEAN HUNTER, STAR WARS TRILOGY,
ZOMBIE REVENGE, CRAZY TAXI, JAMBO SAFARI, F355, VIRTUA TENNIS, VIRTUA NBA
NN VER SHTP MODEL 3 / NAOMI GAME
BOARDS OUTSIDE OF CAGEH!!
CARTON BOX 601-8928 (1) Used for transporting the GAME BOARD.
- {SUPPLIED WITH YOUR GAME} oe 2) id DO NOT SHIP GAME BOARD WITHOUT THIS BOX AS IT MAY DAMAGE THE GAME BOARD AND VOID YOUR WARRANTY.
“CHECK SIDE” Display
FILTER BOARD
NO OTHER GAMES BOARDS ARE TO BE SHIPPED IN THE CAGE AS THEY MAY BE DAMAGED BEYOND REPAIR. PLEASE SHIP THEM WITHOUT CAGE PROPERLY PROTECTED DURING SHIPPING.
- ASSEMBLING AND INSTALLATION
A
When carrying out the assembly work, follow the procedure in the following 5-item sequence:
1 | ASSY OF BILLBOARD
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
POWER SUPPLY By] ] WW] | pm
ASSEMBLING CHECK
A
1 ASSY OF BILLBOARD
Make sure 2 or more persons are available to perform this work. Attempting to ( Due to its large size, it is very difficult for one person alone to install the billboard, perform the installation alone can cause an accident.
® Mount Billboard on cabinet by ensuring the front lip of the Billboard is securely placed under the mounting bracket already installed on the cabinet. Fasten with the 3 hexagon bolts.
@ Connect all of the 4 connectors inside the Billboard box (This needs to be done prior to final installation of Billboard Assy). BILLBOARD
TAMPERPROOF_SCREW(2) M4 x 12
When performing work, be sure to use a step.
2 SECURING IN PLACE (ADJUSTER ADJUSTMENT)
Be sure to have all the Adjusters make contact with the surface. Unless the Adjusters come into contact with the surface, the Cabinet
This machine has 4 each of casters and adjusters (shown below). When the installation position is determined, cause the adjusters to come into contact with the floor directly, make adjustments in a manner so that the casters will be raised approximately 5mm. from the floor and make sure that the machine position is level.
Q@) Move the machine to the installation position. YZ
Adjust Bolt ~
Q) Cause all of the leg levelers to make contact °
with the floor. By using a wrench, make adjustments in the height of the leg adjusters to * ensure that the machine's position is level. Leg Leveler
@ After making adjustments, fasten the leg
adjuster nut upward and secure the height of the CASTER (4) leg adjuster.
ADJUSTER (2)
3 | POWER SUPPLY
@ Ensure that the power cord is not exposed on the surface (passage, etc.). If exposed, they can be caught and are susceptible to damage. If damaged, the cord can cause an electric shock or short circuit. @ Ensure that the wiring position is not in the customer's passage way
Connect the game to the power supply and turn on power to the game. Before connecting power supply be sure that power switch is off
® Turning the AC unit’s main switch on will cause the machine to start the power check and network check automatically.
CIRCUIT PROTECTOR
Main SW off
EARTH TERMINAL Connect with the indoor earth terminal. a D5 MAIN SIF
4 ASSEMBLING CHECK
The TEST MENU allows for each part of the cabinet to be checked, the Monitor to be adjusted, and the coin and game related various functions to be performed.
Selecting the MEMORY TEST on the test mode menu screen causes the on-board memory to be tested automatically. The game board is satisfactory if the display beside each IC No. shows GOOD.
Selecting the INPUT TEST on the Test Mode menu screen causes the screen (on Which each switch adnV.R. are tested) to be displayed. Press each switch. For the coin switch test, insert a coin from the coin inlet with the coin chute door being open. If the display beside each switch indicates “ON”, the switch and wiring connections are satisfactory. Check the display of V.R. value for steering wheel and accelerator & brake. If the V.R. values are not satisfactory, make adjustments as neccesary.
In the OUTPUT TEST mode, carry out lamp test to ensure that each lamp lights up satisfactory.
SOUND TEST
VoIce
EFFECT
BGM
EXIT
‘SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON TO EXIT
CRI.TEST 1/2
GREEN
BLUE
WHITE
PRESS TEST BUTTON TO CONTINUE
CRI. TEST 22
PRESS TEST BUTTON TO CONTINUE In the TEST mode, selecting SOUND TEST causes the screen, on which sound related BD and wiring connections are tested, to be displayed. Be sure to check if the sound is satisfactorily emitted from each of speaker and the sound volume is appropriate.
In the TEST mode menu, selecting C.R.T. TEST allows the screen (on which the projector is tested) to be displayed. Although the projector adjustments have been made at the same time of shipment from the factory, color deviation, etc., may occur due to the effect caused by geomagnitism, the location building’s steel frames and other game machines in the periphery. By watching the test mode screen, make judgement as to whether an adjustment is needed. If it is neccessary, adjust the projector by refering to Section 9.
Perform the above inspections also at the time of monthly inspection.
5 .PRECATIONS TO BE HEEDED WHEN MOVING THE MACHINE
@ When moving the machine, be sure to pull out the plug from the power supply. Moving the machine with the plug as is
Use care when handling glass made parts. When the glass is damaged, fragments of glass can cause injury
Do not push plastic parts or CRT.
- CONTENTS OF GAME
The following explanations apply to the case the product is functioning satisfactorily. Should there be any moves different from the following contents, some sort of faults may have occured. Immediately look into the cause of the fault and eliminate the cause thereof to ensure satisfactory operation.
OUTLINE OF GAME
FROM AMONG THE 29 NBA TEAMS, SELECT YOU R FAVORITE TEAM When a single play mode is selected, you battle against the computer controlled players in a tournament imagined real NBA playoffs. If the score you have earned is greater than that of the opposing team at the game end, you can proceed to the next stage. In case of a tie score or less the game is over. A player can buy into play a versus game, and the game can be continued up to the 4th quater. Upon finishing a quarter, the player who has earned greater score can proceed to the next game. The player who lost the game can also play the game by executing a continue. In case that a quarter ends in a tie, the player who has earned greater score in that quarter can proceed to the next quarter.
HOW TO OPERATE
Operate the lever and the 2 buttons to play the game. LEVER: movement BLUE BUTTON: (offense) pass (defense) steal RED BUTTON: (offense) shoot (defense) block shot/rebound
HOW TO PLAY
OFFENSE: JUMP SHOT When standing still, keep pressing down the shoot button to jump. Release the shoot button to shoot the ball. RUNNING JUMPER Press the shoot button to do a running jumper while dribbling. If the defense stops your dribble, you will shoot a regular jump shot. You can perform a dunk shot depending on the distance to the goal or the timing of a shot. PASS: You can pass to any of your teammates by inclining the Lever in the direction of the intended player, and then pressing the pass button. DEFENSE: BLOCK SHOT You can interrupt an opposing player’s shot if you press the block button timely in accordance to his jump. You can decrease the probability of making the shot, even if you can not block the shot. STEAL When you are very close to the opposing player dribbling, if you press the steal button timely, you can steal the ball. You can also steal the ball if you timely press the steal button at a certain position when an opposing player is passing the ball.
7 .EXPLANATION OF TEST AND DATA DISPLAY
By operating the switch unit, periodically perform the tests and data check. When installing the machine initially or collecting cash, or when the machine does not function correctly, perform checking in accordance with the explanations given in this section. The following shows tests and modes that should be utilized as applicable.
TABLE 7 EXPLANATION OF TEST MODE
ITEMS DESCRIPTION SECTIONS
When the machine is installed, perform the following: INSTALLATION | 1. Check to see that each setting is as per standard setting made 7-10, 7-11 OF MACHINE at the time of shipment. 1-6
- In the INPUT TEST mode, check each SW and VR. 7-7
- In the OUTPUT TEST mode, check each of lamps. 7-3,7-4
- In the MEMORY TEST mode, check ICs on the IC Board.
Choose MEMORY TEST in the MENU mode to allow the MEMORY MEMORY test to be performed. In this test, PROGRAM 7-3,7-4 RAMs, ROMs, and ICs on the IC Board are checked.
Periodically perform the following: 7-10,7 -I
- MEMORY TEST
- Ascertain each setting. 7-6
- In the INPUT TEST mode, test the CONTROL device
- In the OUTPUT TEST mode, check each of lamps. 7-7
CONTROL 1. In the INPUT TEST mode, check each SW and VR. 7-6 SYSTEM 2. Adjust or replace each SW and VR.
- If the problem can not be solved yet, check the CONTROL’s moves] 8
MONITOR In the MONITOR ADJUSTMENT mode, check to see if the 12 MONITOR adjustment is appropriately made.
IC BOARD |. MEMORY TEST 7-2
2.In the SOUND TEST mode, check the sound related ROMs. 7-8
DATA CHECK Check such data as game play time and histogram to adjust the 7-15 difficulty level, etc
7-1 SWITCH UNIT AND COIN METER
Never touch places other than those specified. Touching places not specified can cause electric shock and short circuit.
requirements of the installation location. @ If the COIN METER and the game board are electrically disconnected,
Gro¥) @ Adjust to the optimum sound volume by considering the environmental
: i Open COIN CHUTE DOOR, and the \ switch unit shown appears. The function i
of each switch is as follows: & )
SWITCH UNIT / / /
@ SPEAKER VOLUME: _ Sound Volume can be adjusted for the 2 Speakers.
WOOFER VOLUME: Sound Voume can be adjusted for the WOOFER.
TEST BUTTON: For the handling of the TEST BUTTON, refer to the following pages.
SERVICE BUTTON: Gives credits without registering on the coin meter. OOOO DEMAG. SWITCH: Eliminates the on-screen color unevenness due to magnetization of CRT. First use this SW before performing the monitor’s color adjustment.
7-2 SYSTEM TEST MODE
The contents of setings chnaged in the TEST mode are stored when the TEST mode Gro¥) is finished from EXIT in the MENU mode. If the power is turned off before the TEST mode is finished, the contents of setting chnage become ineffective. Executing “BACKUP DATA CLEAR” in the SYSTEM TEST MODE does not clear the BOOKKEEPING data in the GAME TEST MODE.
Entering the TEST mode clears fractional number of coins less than one credit and BONUS ADDER data.
The SYSTEM TEST mode mainly allows for IC Board functioning check, monitor adjustment, coin assignments, etc. For details, refer to NAOMI SERVICE MANUAL. The following assignments, however, should be designated for this product. CABINET TYPE: 1 PLAYER (S)
MONITOR TYPE: HORIZONTAL
COIN CHUTE TYPE: COMMON
7-3 GAME TEST MODE
SOUND TEST SOUND TEST
Voice VoIce
EFFECT EFFECT
BGM BGM
>EXIT >EXIT
SELECT WITH SERVICE BUTTON SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT PRESS TEST BUTTON TO EXIT
Press the TEST button to display the SYSTEM TEST MODE MENU. By pressing the SERVICE button, move the arrow (->) to select the GAME TEST MODE. Press the TEST button to enter GAME TEST MODE. The screen displays the GAME TEST MODE MENU. + By pressing the SERVICE button, move the arrow (->) to select the desired item. Press the TEST button to execute the selected item.
+ Select EXIT and press the TEST button to exit from the GAME TEST MODE and return to the SYSTEM TEST
MODE MENU. Further, select EXIT and press the TEST button to finish SYSTEM TEST MODE and return to the
normal mode.
7-4 INPUT TEST
Select INPUT TEST to have the screen shown below appear and to observe the status of each switch and the value of each V.R. on the Control Panel. Periodically check the status of each switch and V.R. on this screen.
SOUND TEST
Voice
EFFECT
BGM
>EXIT
SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT
FIG. 7.4 INPUT TEST
7-5 OUTPUT TEST
SOUND TEST
Voice
EFFECT
BGM
>EXIT
SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT
FIG. 7.5 OUTPUT TEST @ By pressing each switch, if the display on the right-hand side of the name of each switch changes to ON from OFF, the SW and the wiring connections are satisfactory.
To check CHUTE 1 & CHUTE 2 coin switches, open the COIN CHUTE DOOR and insert a coin(s) in the slot.
Press either the TEST BUTTON and the START BUTTON to return to the test menu.
As a standard, refer to the following for each of the Volume’s adjustment. By operating the Handle (Steering Wheel) and Pedal, if the V of each Volume guage smoothly moves as the corresponding value varies ina natural manner, then it is satisfactory.
Choose OUTPUT TEST to cause the following lower screen to appear. In this test, check the status of each lamp.
The right-hand side “ON” & “OFF” display of START LAMP automatically alternates. The lamp lights up when “ON” is displayed and goes off when “OFF” is displayed. Check to ensure that the lamp lights up and goes off in consistency with the display of “ON” and “OFF”.
Press the TEST button to return to the TEST MENU.
7-6 SOUND TEST
SOUND TEST
AUTO
SE
BGM& VOICE
>EXIT
‘SELECT WITH SERVICE BUTTON
PRESS TEST BUTTON 10 EXIT
FIG. 7.6 SOUND TEST
7-7 CRT. TEST
CRITEST 1/2
RED
GREEN
BLUE
WHITE
PRESS TEST BUTTON TO CONTINUE
CRT.TEST 22
PRESS TEST BUTTON TO EXIT
FIG. 7.7 C.R.T. TEST This test mode allows each sound related board and speaker to be checked.
e Press the Service Button to select the sound to be tested, and press the Test Button to have the selected Sound Test screen appear.
@ Select EXIT and press the Test Button to return to the Test Menu.
@ Select C.R.T. TEST to cause the MONITOR to display the screen shown left, allowing MONITOR adjustment status to be checked.
@ Periodically check the MONITOR adjustment status on this screen.
The screen (1/2) enables color adjustment check to be performed. The color bar of each of the 4 colors, i.e..red, green, blue, and white, is the darkest at the extreme left and becomes brighter towards the extreme right.
Press the TEST BUTTON to shift to the next screen (2/2).
The screen (2/2) allows screen size and distortion to be tested.
Check if the CROSSHATCH FRAME LINE goes out of the screen and if the crosshatch lines are distorted.
Press the TEST BUTTON to return to the MENU mode.
7-8 VS. TEAM DATA
In this test, the Team Data in the VS. mode can be checked.
USE: Displays team selection frequency. \VS> TEAM DATA
ose WIN:
a Displays each team’s total number of victories in versus DRAW: games.
LOSE: DRAW: Displays each team’s total number of draws in versus >EXIT games.
LOSE: Displays each team’s total number of losses in versus games.
PRESS TEST BUTTON 70 EXIT
FIG. 7.8 VS. TEAM DATA
7-9 GAME ASSIGNMENTS Selecting the GAME ASSIGNMENTS in the MENU mode causes the present game settings to be displayed and also the game settings changes (game difficulty, etc.) can be made. Each item displays the following content.
SETTING CHANGE PROCEDURE
@_ Press the SERVICE BUTTON to move the “>” to the desired item. @ _ Choose the desired setting change item by using the TEST BUTTON. @ To return to the MENU mode, move the arrow to EXIT and press the TEST BUTTON.
GAME ASSIGNMENTS
START TIME 50 TIME DIFICULTY 4/8 GAME DIFFICULTY 4/8
>EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON TO EXIT
@ TIME SET The time for one play can be set within a range of 1°15” and 3°00”.
ONE MATCH MODE Select from among OFF, 1 GAME, and FULL GAME. OFF- This is the standard setting 1 GAME- Game is over when one game is finished. This option is for some sorts of event such as game competition, etc. FULL GAME- Regardless of communication mode 1P (against the computer) mode, the game starts at the Ist quarter.
GAME DIFFICULTY Sets the difficulty level in 4 categories, i.e., EASY, NORMAL, HARD, and HARDEST.
CONTINUE TYPE Game continue setting. “CHARGE” and “WINNER NO CHARGE?” settings are available. The standard setting is WINNER NO CHARGE. WINNER NO CHARGE>The player who wins the versus game can continue to play. CHARGE>In this option, each time game is finished, the player who plays the game against the computer is urged to continue whether he wins or not. In versus game, the players are urged to continue each time quarter ends regardless of win or loss. VS. WIN TO CHARGE >In this option, when played against a computer, the player is urged to continue each time when game is finished. When played in VS. mode, the player who wins the game can continue the game.
7-10 COIN ASSIGNMENTS
The “COIN ASSIGNMENTS” mode permits you to set the start number of credits, as well as the basic numbers of coins and credits. This mode expresses “how many coins correspond to how many credits.”
SETTING CHANGE PROCEDURE
Gro¥) Setting changes cannot be stored unless the TEST BUTTON is pressed
while the arrow is on EXIT.
oO) Press the SERVICE BUTTON to move the arrow to the desired item.
@ Choose the desired setting change item by using the TEST BUTTON.
® To return to the MENU mode, move the arrow to EXIT and press the TEST BUTTON.
7-10 COIN ASSIGNMENTS
COIN ASSIGNMENTS @ COIN/CREDIT SETTING Sets the CREDITS increase increment per coin insertion. There are 27 setings from #1 to #27, expressed in XX COIN/CREDIT SETTING = #1 CREDIT as against XX COINS inserted. (TABLE 7.10a, CHUTE#! 1. COIN 1 CREDIT 7.10b) #27 refers to FREE PLAY. When the COIN CHUTE TYPE is set to INDIVIDUAL, there are some setting numbers not displayed as indicated in CHUTE. 1COIN CREDIT TABLE 7.10b.
ADDITIONAL SETTING
MANUAL SETTING @ MANUAL SETTING
This allows credit increase setting as against coin insertion vex to be further set in the manner finer than COIN/CREDIT SETTING (refer to TABLE 7.10c).
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
TABLE 7.10a COIN/CREDIT SETTING (COIN CHUTE COMMON TYPE)
SETTING FUNCTIONING OF CHUTE#1
| SETTING #1 | 1 COIN | 1 CREDIT. |
| SETTING #2 | 1 COIN | 2 CREDITS |
| SETTING #3 | 1 COIN | 3 CREDITS |
| SETTING #4 | 1 COIN | 4 CREDITS |
| SETTING #5 | 1 COIN | 5 CREDITS |
| SETTING #6 | 1 COIN | 2 CREDITS |
| SETTING #7 | 1 COIN | 5 CREDITS |
| SETTING #8 | 1 COIN | 3 CREDITS |
| SETTING #9 | 1 COIN | 4 CREDITS |
| SETTING #10 | 1 COIN | 5 CREDITS |
| SETTING #11 | 1 COIN | 6 CREDITS |
| SETTING #12 | 2 COINS | 1 CREDIT |
| SETTING #13 | 1 COIN | 1 CREDIT. |
| SETTING #14 | 1 COIN | 2 CREDITS |
| SETTING #15 | 1 COIN | 1 CREDIT |
2 COINS 3 CREDITS
| SETTING #16 | 1 COIN | 3 CREDITS |
| SETTING #17 | 3 COINS | 1 CREDIT. |
| SETTING #18 | 4 COINS | 1 CREDIT. |
| SETTING #19 | 1 COIN | 1 CREDIT |
2 COINS 2 CREDITS 3 COINS 3 CREDITS 4 COINS 5 CREDITS
| SETTING #20 | 1 COIN | 5 CREDITS |
| SETTING #21 | 5 COINS | 1 CREDIT. |
| SETTING #22 | 1 COIN | 2 CREDITS |
| SETTING #23 | 2 COINS | 1 CREDIT |
4 COINS 2 CREDITS 5 COINS 3 CREDITS
| SETTING #24 | 1 COIN | 3 CREDITS |
| SETTING #25 | 1 COIN | 1 CREDIT |
2 COINS 2 CREDITS 3 COINS 3 CREDITS 4 COINS 4 CREDITS 5 COINS 6 CREDITS
| SETTING #26 | 1 COIN | 1 CREDITS |
SETTING #27 FREE PLAY
MANUAL SETTING
Selecting MANUAL SETTING in the COIN ASSIGNMENTS mode displays the following screen.
MANUAL SETTING
COIN CHUTE #1 MI —----\-----© coN 1 CREDIT 1
COIN CHUTE #2 MI
LOIN COUNTS: coON 1 2 7 creDIr 102030 4 5S GT >EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
FIG. 7.11b MANUAL SETTING
@ Determines Coin/Credit setting.
@ This sets how many coins should be inserted to obtain one Service Coin.
@ This sets how many tokens one coin represents.
Table 7.10e MANUAL SETTING
COIN TO CREDIT 1 COIN 1 CREDIT. 2 COINS 1 CREDIT. 3 COINS 1 CREDIT. 4 COINS 1 CREDIT. 5 COINS 1 CREDIT. 6 COINS 1 CREDIT. 7 COINS 1 CREDIT. 8 COINS 1 CREDIT. 9 COINS 1 CREDIT.
BONUS ADDER NO BONUS ADDER 2 COINS GIVE 1 EXTRA COIN 3 COINS GIVE 1 EXTRA COIN 4 COINS GIVE 1 EXTRA COIN 5 COINS GIVE 1 EXTRA COIN 6 COINS GIVE 1 EXTRA COIN 7 COINS GIVE I EXTRA COIN 8 COINS GIVE 1 EXTRA COIN 9 COINS GIVE 1 EXTRA COIN
COIN CHUTE MULTIPLIER 1 COIN COUNTS AS 1 COIN 1 COIN COUNTS AS 2 COINS 1 COIN COUNTS AS 3 COINS 1 COIN COUNTS AS 4 COINS 1 COIN COUNTS AS 5 COINS 1 COIN COUNTS AS 6 COINS 1 COIN COUNTS AS 7 COINS 1 COIN COUNTS AS 8 COINS 1 COIN COUNTS AS 9 COINS
7 - 11 BOOKKEEPING
Choosing BOOKKEEPING in the MENU mode displays the data of operating status up to the present are shown on 2 pages. Press the TEST BUTTON to proceed to PAGE 2/2.
@ COIN CHUTE#*: BOOKKEEPING PAGEUS - A . Number of coins put in each Coin Chute.
COIN CHUTE #1 XXXXXXXXXXX
COIN CHUTE #2 XXXXXXXXXXX
TOTAL COINS XXXXXXXXXXX @ TOTAL COINs:
Total number of activations of Coin Chutes. COIN CREDITS XXXXXXXXXXX
SERVICE CREDITS XXXXXXXXXXX
TOTAL CREDITS XXXXXXXXXXX @ COIN cREDITs:
NUMBER OF GAMES XXXXXXXXXXX Number of credits registered by inserting coins.
TOTAL TIME XDXXHXXMXXS
IPPLAY TIME XDXXHXXMXX: . . VS.PLAY TIME XDXXHXXMXXS In Page 2/5, Histogram of Number of Play as against Play AVERAGE PLAY TIME XXMXXS_ Time is displayed. For setting the DIFFICULTY, refer to this LONGEST PLAY TIME XXMXXS histoe: SHORTEST PLAY TIME XXMXXS istogram.
PLAY TIME RATE XXX
VS. PLAY RATE XXX
PRESS TEST BUTTON TO CONTINUE
FIG. 7.11a BOOKKEEPING (1/5)
BOOKKEEPING PAGE 25 BOOKKEEPING 3/5,
TIME HISTOGRAM
COURSE BEGINNER ADVANCED EXPERT TOTAL GAME COUNT xxx 0 0 0 ALGAS
o o o CONTINUE GAME COUNT XXX
0 0 0 0 0 0 PLAYER 1 GAME COUNT XXX
° ° ° PLAYER 2 GAME COUNT XXX
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
PRESS TEST BUTTON TO CONTINUE PRESS TEST BUTTON TO CONTINUE
FIG. 7.11b BOOKKEEPING (2/5) FIG. 7.11¢ BOOKKEEPING (3/5)
BOOKKEEPING PAGE 4/5 BOOKKEEPING 5/5
DRAW COUNT Xx
TOURNAMENT REPORT VS. WINS MAXIMUM Xx
VS. WINS HISTOGRAM Xx
>EXIT
PRESS TEST BUTTON TO CONTINUE SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT
FIG. 7.11d BOOKKEEPING (4/5) FIG. 7.11e BOOKKEEPING (5/5)
7-12 BACKUP DATA CLEAR
BACKUP DATA CLEAR
YES (CLEAR) >NO (CANCEL)
SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT
FIG. 7.12 BACKUP DATA CLEAR Clears the contents of BOOKKEEPING and high score player ranking entry.
When clearing, bring the arrow to “YES” and when not clearing, to “NO”, by using the SERVICE BUTTON, and push the TEST BUTTON.
When the data has been cleared, “COMPLETED” will be displayed. Bring the arrow to “NO” and press the TEST BUTTON to cause the MENU mode to return on to the screen.
- CONTROL PANEL
@ !n order to prevent an electric shock and short circuit, be sure to turn power off before performing work by touching the interior parts of the product.
When closing the Control Panel, be very careful so as not to have hand and fingers pinched in.
8-1 ADJUSTING AND REPLACING THE VOLUME
Turn power OFF by using the Main SW of AC Unit or SUB PWR SPLY SW inside the SERVICE DOOR.
Unlock the lock on theback of the Control Panel Base, and open the Control Panel Base.
There are 6 Connectors on the monitor side of the Base interior. Disconnect all of the 6 Connectors. Depending on the game used, however, not all of the 6 connectors may have been connected. © © OO
By removing the 6 sets of Carriege bolts and Flange Nuts, the Control Panel can be removed from the Base. At this time, be very careful so as not to damage wiring.
CONTROL PANEL BASE
CONTROL PANEL
Disconnect_the Connector. / / {CARRIAGE BOLT (6) M4 x16
HOW TO REPLACE INSTRUCTION SHEET
® Turn power OFF by using the Main SW of AC Unit or the SUB PWR SUPPLY SW inside the SERVICE DOOR. @ Unlock the lock on the back of the Control Panel Base, and open the Control Panel Base. @ From inside the Control Panel Base, remove the 4 L WASHERS from both sides of INSTRUCTION COVER by removing the screw from each. @® Remove the Instruction Cover to replace the Instruction Sheet. By using ther reversed procedure, install the Instruction Cover by securing the 4L WASHERS. Pay careful attention to the method securing the L WASHERS.
SCREW(1) for each. M4x8, w/flat & spring washers
INSTRUCTION SHEET
__INSTRUCTION SHEET COVER _
9 . COIN SELECTOR
HANDLING THE COIN JAM
The coin selector should be cleaned once every 3 months. When cleaning, follow the procedure below: (@® Turn the power for the machine OFF. Open the coin chute door. © Open the gate and dust off by using a soft brush (made of wool, etc.). @ Remove and cleen smears by using a soft cloth dipped in water or diluted chemical detergent and then squeezed dry. ® Remove the CRADLE. When removing the retaining ring(Ering), be very careful so as not to bend the shaft. © _ Remove stain from the shaft and pillow portions by wiping off with a soft cloth, etc. ©) After wiping as per #5 above, further apply a dry cloth, etc. to cause the coin selector to dry completely.
2) @ Never apply machine oil, etc. to the coin selector @ After cleaning the Coin Selecting,
IMPORTANT! Insert a regular coin in the normal
working status and ensure that the Selector correctly functions.
COIN INSERTION TEST Once a month, when performing the COIN SW TEST, simultaneously check the following:
O Does the Coin Meter count satisfactorily? O Does the coin drop into the Cashbox correctly?
O Is the coin rejected when inserted while keeping
the REJECT BUTTON is pressed down? Insert a coin while keeping the Reject Button pressed down and check if itis rejected.
COIN METER If the coin is not rejected when the REJECT BUTTON is pressed, open the coin chute door and open the selector gate. After removing the jammed coin, put a normal coin in and check to see that the selector correctly functions.
CLEANING THE COIN SELECTOR
FIG.11b
HG. lle
OPTIONAL DOLLAR BILL ACCEPTOR
@ THE COIN DOOR ASSEMBLY USED ON VIRTUA TENNIS COMES EQUIPPED TO ACCEPT A DOLLAR BILL ACCEPTOR. ALL NEEDED WIRING CONNECTIONS ARE CONVIENENTLY LOCATED INSIDE THE GAME FOR THIS APPLICATION.
@ THE COIN DOOR CAN ACCCOMMODATE THE FOLLOWING VALIDATORS:
HOLE POSITION#1 Mars 2000 series (FORWARD-MOST POSITION)
HOLE POSITION#2 Mars 2000 series DBV45 (JCM)
HOLE POSITION #3 CURRENTLY NOT USED
HOLE POSITION #4 DSIO1*
*The back flange on the chute can be removed for hold position #4. If the flange is not removed, it may interfere with the back of the cabinent.
The frame and cashbox enclosure on this coindoor has been modified to accomodate a Mars 2000 series upstacker. A 2000 series stacker can be added by simply removing the top two entry door and replacing it with a one entry door with a cut-out for a stacker. This one entry door can be ordered through Coin Controls or one of Coin Controls authorized distributors. The part number is 91-4000-01. The Mars stacker can be obtained through an autherized Mars distibutor.
It should also be noted that this unit comes equipped with security hasp that surrounds the two bottom doors where the cash box is located. This is to ensure that the monies within are not tampered with, except by the operator.
pe] LIN) 1e i TiN E T RiN saltlolsla ul G A 1850 HOWARD ST., ELK GROVE EL 60007 (847) 228-1810
By!
+ VARS SERIES 2000 UPSTACKER ADAPTABLE UVER/ UNDER LWU ENTRY COIN BOOR*
PART # DESCRIPTION cost PART # DESCRIPTION COST PART # DESCRIPTION COST
- W2-4060-KX 5-10 ACCEPTOR 19.50 16) 91-1109-16 BRVECT FLAP NYLON, BLICL = 2.70 28) 3-10-00 RY DC ATER 5.50 WAISC-OL S708 4.25, TA) 17) SH-HLL3-O1 ENTRY/RBJECT BUTTON 2% 445 33-1108-00 4.59 D0 ABTER 3.50
- AITO PLASTIC CASOBOX 70 18) S1-1117-00 LAMPHOLDER 140 20) 90-1032-01 MBTER & LOCKOWT SCRRT 2
- A-418-00 BNCLOSURE, 22000 7.40 19) S1-1121-00 / BUTTON SPRING 8) 30) 22-1400-00 LOCKTNG Bak 7.00
- M-L002-00 HINGE SCRBT re) 20) SH-1116-00 €V LAMP FEDGE BASE Ah SL) MO-1O19-00 3/4" LOCKTASHER a
- 90-1003-00 CLAMP SCRET 4% Qt) SIC3LL-16 BUTTON BEZEL BLACK 2.70
- 90-1017-00 SCREY BRZEL NYLON & 22) M-1312-16 REVECT BEZEL BLACK, 2.70 TY 90-1206-02 — #-40 REP AUT & 23) 2125-00 L2V LOCKOUT COTL ASSEMBLY = 12.85
- 90-1300-00 KEYEOOK 4b 24) OL-2216-16 VICROSHTTCE. ASSEMBLY 15.00
- 91-0606-16 FRAME 30.00 24k) SL-LLL6-16 MICROSPTTCR BLACK 54
- 91-0606-€0 CLAMP 4 SL-LLEG-LL LICROSPITCH WRITE 5.40 $1) 91-0647-00 DOUBLE D Call LOCK 5. SI-{116-10 WICROSHITCH RED 5.40
- 91-0600-16 BLACK MINT Deo 540 248) $1-1125-00 MICROSHITCE PLASTIC COR 85
- 91-0804-16 2 ENTRY UPPER DOcR 10.00 2%) 92-1002-01 COIN INLET LAP SIDE 1.00
- 91-1005-699 LOCKOUT BRACKET Ad 26) $2-4002-021 COW INLET COVER SIDE 1.80
- 91-1008-107 BASHPLATE ASSENBLY 5.00 21) §2-1002-10 HOLD DOWN BRACKET 1.50
JAN. 1998 FORM 92-1003-05
- MONITOR
AN
DEMAGNETIZER/ = ® FOCUS LEAD Bi uu
COIL (biack)
SECONDARY SIDE EBT Approx.
(Chassis, sheet metal work, CRT, etc.) & Disconnect or unplug, 29kV
Primary side and secondary side The monitor’s circuit which is divided into the Primary side and secondary side, is electrically isolated. Do not touch the primary side and the secondary side simultaneously. Failing to observe the instruction can cause electric shock, and this is very dangerous. SECONDARY SIDE When making monitor adjustments, use a non- (Chassis, CRT) conductive driver and make adjustment without touching any other part other than the Adjustment V.R. and Knob. Also, be sure not to cause a shortcircuit to the Primary side and the Secondary side. If short-circuited, it can cause electric shock or malfunctioning, which is very dangerous. PRIMARY SIDE
High tension Voltage Some of the parts inside the monitor are subject to high-tension voltage in excess of 20,000 volts and very dangerous. Therefore, do not touch the monitor interior. Should soldering & paper wastes, etc. be mixed in the monitor, turn the power off so as not to cause malfunctioning or fire hazard.
ANODE CAP PRIMARY SIDE DEMAGNETIZER, REAR PART
® ANODE LEAD |_MAIN BD 5 ‘Approx. 29 kV
Approx. 10 kV
Hi
Connecting the CRT and PCB For combining the CRT and PCB, use the specified part No. to maintain the status of adjustments made at the factory. The anode of the CRT itself will be accumulitavely charged as time elapses, generating high tension voltage which is very dangerous. The monitor should be used with the Chassis, CRT and PCB assembled. When repair, etc. is required at the time of malfunctioning, be sure to send it in an “as assembled” condition. If these are disassembled, what’s charged to said high tension voltage can be discharged, causing a very hazardous situation. Therefore, under no circumstances should it be disassembled.
Monitor adjustments have been made at the time of shipment. Therefore do not make further adjustment without a justifiable reason. Adjusting the monitor which contains high tension parts is dangerous work. Also, an erroneous adjustment can cause deviated synchronization and image fault, resulting in malfunctioning. When making adjustment, utilize a resinous Alignment Rod. Servicing with bare hands or using conductive tools can cause electric shock.
When performing such work as monitor installation/removal, or inserting /disconnectiing the exteernal Connector connected to teh monitor and it’s interiror, first be sure to disconect thje
- malfunctioning. When performing work, be very careful. To avoid electric shock accidents, etc., personnel other tha those who have technical expertise are not allowed to perform this work. Perform work bny following the procedure herein stated. Failing to comply with these instructions can cause an electric shock accident. Be sure to use 2 or more workers for this work. Performing work by work person can cause injury or parts damage. To ensure performing the work safety, provide sufficient space. Working in places with narrow space can cause injury or working errors. Be careful so as not to damage wirings. Damaged wiring can cuase an electric shock or short circuit accident. Do not touch places ther than those specified. Touching places other than those specified can cuase an electric shock or short circuit accident.
After the vertical/horizontal transposition of the MONITOR (GAME BD replacement), monitor adjustments may be required.
For perfroming the monitor’s vertical/horzontal transposition in the manner consistent with the Game Board, follow the procedure below:
Oo) After turning power off by using the Main SW of
AC Unit or the SUB PWR SPLY SW inside the
SERVICE DOOR, unplug the power plug from the socket outlet.
Open the Control Panel Base. © ©
By using a flat blade type screwdriver, etc., remove the 4 Screw Caps from the Front Panel.
S) Take out the 4 tamperproof screws and the 2 screws, and remove the Front Panel.
Disconnect the 2 Connectors for the speakers. ‘TAMPERPROOF SCREW (4) 0 ~~ Ng x25 Take out the 6 Tamperproof screws, and remove the CRT Cover. © © ©
Disconnect the 2 Connectors connected to the
frame on the back side of CRT and the Connector 4 SCREW (2) connected to THERES AUER PME Wadnonee ~ / the secured wiring.
Remove the nuts securing the corners of the © monitor.
© By holding the monitors sheet metal frame
portion, pull out from the cabinet. At this time, be very careful so as not to damage wiring. Since the monitor is a heavy item, lift up by 2 persons and another personi monitor from the rear.
1) Install the monitor to the cabinet. When placing
the cabinet horizontally, the 2 Connectors connected to the aforementioned frame are on the
right-hand side facing the CRT face. When placing the cabinet vertically, the 2 Connectors are underside.
rom the CRT Cover
FLANGE NUT (4) M6 FLAT WASHER, large type (4)
SPACER (4)
For performing work, use 3 workers.
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
- REPLACEMENT OF FLUORESCENT LAMP
() @ When performing the work, be sure to turn power off. Working
with power on can cause an electric shock or short circuit accident.
WARNING! @ The Fluorescent Lamp, when it gets hot, can cause burns. Be
very careful when replacing the Fluorescent Lamp.
11 -1 REPLACEMENT OF FLUORESCENT LAMP
® Turn power OFF by using the Main SW or the SUB PWR SPLY SW inside the SERVICE
DOOR.
@) Open the Control Panel.
TAMPERPROOF SCREW (4) ~~ M6 X 25
SCREW (2) M4X12,w/flat & spring washers
® By using a Flat-blade screwdriver, etc.remove the 4 Screw
Caps from the Front Panel.
O) Take out the 4 Tamperproof screws and 2 screws, and remove the Front Panel to replace the Fluorescent Lamp.
FLUORESCENT LAMP 208 LOCAL PURCHASE
- PERIODIC INSPECTION TABLE The items listed below require periodic check and maintenance to retain the performance of this machine and ensure safe operation.
securley inserted, dust is accumulated between the Socket Outlet and the Power
Plug, etc. Using the product with dust as is accumulated can cause a fire or
- | @ Periodically once a year, request the place of contact herin stated or the Distributer, etc. where the product was purchased from, as regards to the interior cleaning. Using the product with dust as is accumulated in the interior without cleaning can cause a fire or short circuit accident. Note that cleaning the interior parts can be performed on a pay-basis.
( @ Be sure to check once a year to see if Power Cords are damaged, the plug is
Item Interval Reference
CABINET Check Adjusters’ contact with surface. Daily 3
CONTROL PANEL Check lamps. Monthly 9 Check YOLUME value. Monthly 9
Greasing Trimonthly 10-2
ACCEL. & BRAKE Check VOLUME value. Monthly 9 Greasing Trimonthly 12-3 SHIFT LEVER Check switches. Monthly 9 Greasing Trimonthly 11-3 COIN SELECTOR Check COIN SW. Monthly 9 Coin insertion test. Monthly 13 Cleaning of COIN SELECTOR. Trimonthly 13 MONITOR Check adjustments. Monthly or when moving. | 6,9, 14 Cleaning of CRT surfaces. Weekly 14-2 GAME BD MEMORY TEST. Monthly SERVICE MANUAL Check settings. Monthly 9 Cabinet surfaces Cleaning As necessary. See below. INTERIOR Cleaning Annual ly See above. POWER SUPPLY PLUG Inspection and cleaning
CLEANING CABINET SURFACES
If the cabinet is badly stained, use a cloth which is dipped in the chemical detergent liquid diluted with water and then squezzed dry. Do not use thinner, benzine, alcohol or chemical dustcloth as these can damage Cabinet surfaces.
. TROUBLESHOOTING
Should trouble occur, first check connector connections.
PROBLEMS CAUSE COUNTERMEASURES
With Main SW Power is not supplied. ON, no activation Power supply/voltage is not correct.
AC main fuse causes the power to be cut off due to momentary Plug in correctly
Make sure that power supply/voltage is correct. Check fuse. Remove the cause of overload and replace fuse overload.
Operation is Volume Setting Failure Perform Volume setting unsatisfactory Adjust or replace V.R. Poor mesh of V.R. gear. Adjust Gear mesh.. Spring failure due to secular change of Accelerator and Brake Mecha. Replace the Spring.
Sound from Incorrect volume adjustment Adjsut SW UNIT’s sound adjsutment Speakers and woofer not emitted Malfunctioning bd and AMP. volume. Perform Sound test.
The image on MON..| Affected by the magnetic field of screen has color installation location. deviation. Make CONVERGENCE adjustment. (Refer to Section 12.)
No sound is emitted. | Sound Volume adjustment is not appropriate.
Sound BD and speaker are Adjust sound volume. (see Section 7).
Perform sound test to find and replace malfunctioning. defective parts.(Refer to Section 7).
Joystick controller Switch malfunctioning. Replace the SW. does not operate.
The Fluorescent The Fluorescent tube is burnt out. Replace the Fluorescent tube lamp does not (Refer to Section 11). light up.
- GAME BOARD
Do not expose the Game BD, etc. without a good reason. In this product, setting changes are made during the test mode. The Game BD need not be operated. Use the Game BD, etc. as is with the same setting made at the time of shipment.
14-1 REMOVING THE GAME BOARD
® Turn main switch off. @ Disconnect all of the Connectors connected to the Filter Board at the front of the Shield Case, 3 connectors on the left hand side facing the Shield Case and the right-hand side Connector.
- Take out the thumbscrew securing the Base, and remove the Base from the cabinet with the Shield Case as is mounted. When removing the Base first withdraw the Base towards you up to the notch portions allowing for evading the fitting which secures the Base. From that position, lift up and remove the Base. At this time, be very careful so as not to damage wiring. @ Take out the 4 screws and remove the Shield Case.
THUMBSCREW (1) Mix 25, flat washer used. SCREW (4) M4X16,w/flat & spring washers
Disconnect the Connector.
14 -3 COMPOSITION OF GAME BOARD
S
ASSY CASE NAO USA (840-0021D-01) :USA
nip SH ROM CASE NAO Virtua Tennis
DIP SW SETTING
IN the product, set all of the DIP SWes to OFF.
bags
- DESIGN RELATED PARTS
INSTR SHEET #2
999-0860 (one location only)
TRL PNL OVERLAY 999-0898
STICKER SIDE LINE NOB NOB-1013(both sides)
DESIGN RELATED PARTS
ITEM NO. PART NO.
XXX XXX XXX XXX XXX NOA-1507 XXX XXX XXX XXX XXX XXX DESCRIPTION
PLAY INSTRUCTION SH NBA. SUB INSTR SH NBA POP NBA STICKER SIDE L STICKER SIDER EMBLEM NAOMI STICKER FRONT STICKER F SHEET EMBLEM GUARD PLATE CENTER STICKER CONTROL PANEL OVERLAY
- PARTS LIST
TOP ASSY VIRTUA NBA
‘2
ITEM NO. PART NO.
NOE-1000 NOA-2000 NOA-0001 NOA-1300
031-0S0416 050-F00400 032-000425 068-441616 DESCRIPTION
ASSY U/R CABI ASSYCONTROL PANEL WOODEN BASE MAIN ASSY BILLBOARD
CRG BLT STN M4X16 FLG NUT M4 WING BLT M4X25 FLT WSHR 4.4-16X1.6
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
ASSY U/R CABI (NOE-1000)
ITEM NO. PART NO.
NOB-1100 NOA-1200 NOA-1300 NOA-1400 NOA-1500 NOA-4000 NOA-1750 NOA-1801 NOB-1001 NOB-1002 NOA-1003 NOA-1004 NOA-1005 HOT-1007 280-5112 280-5113 280-5114 CTA-1006 CTA-1150 NOC-1700 LOCAL PURCHASE NOA-1009 NOA-1010 NOA-1011 NOA-1116 NOA-4100 NOA-1014 NOE-1480
200-5787 LOCAL PURCHASE 601-6231-01
008-T00625-0C 030-000620-S 010-P00408-F 008-T00412-0C 008-T00412-0C 050-F00600 000-P00430-W 000-P00320 032-000425 068-441616 008-B00820-0C 031-000626-0C 060-F00800 000-P00412-W 008-B00620-0B 060-F00500 060-S00500 050-H00500 000-P00308-W DESCRIPTION
ASSY FRAMEWORK UR ASSY CRT COVER ASSY BILLBOARD ASSY CONTROL BOX W/CC ASSY FRONT PANEL ASSY ELEC ASSY SERVICE DOOR REAR HATCH FRAME COVER U/RR FRAME COVER U/R L ENDCAPR ENDCAP L REAR COVER UPPER LID COIN CNTR BUSH FOR TV COLLAR FOR TV SPACER 6.4-25X2 SCR CAP ASSY CC BOX WW AC UNIT UL FL HOLDER WSHR PLATE BILLBOARD HOLDER FL BRKT LID COMMUNI PORT ASSY XFMR CUCHION SPONGE 580 COIN SELECTOR UNIT
ASSY CLR DSPL 29TYPE 31K 100V ASSY FL 20W W/CONN HIGH EDGING NEW TYPE
TMP PRF SCR TH CRM M6X25 HEX BLT W/S M6X20 S-TITE SCR PH W/F M4X8 TMP PRF SCR TH CRM M4X12 TMP PRF SCR TH CRM M4X12 FLG NUT M6 M SCR PH W/FS M4X30 M SCR PH M3X20 WING BLT M4X25 FLT WSHR 4.4-16X1.6 TMP PRF SCR BH CRM M8X20 CRG BLT CRM M6X20 FLT WSHR M8 M SCR PH W/FS M4X12 TMP PRF SCR BH BLK M6X20 FLT WSHR M5 SPR WSHR M5 HEX NUT M5 M SCR PH W/FS M3X8
ASSY FRAMEWORK (NOBO0-1100)
ASSY FRAMEWORK (NOBO-1100)
ITEM NO.
CmIADAAWNHH PART NO.
NOA-1601 NOB-1101 NOB-1102 NOA-1111X NOA-1112X NOA-1113 NOA-1114 HOT-1200 253-5366 NOA-1115
601-5699X 601-10461 601-10462 220-5575
050-F00600 030-000620-S 068-652016 050-F00400 010-P00408-F 000-F003 10 050-HO1600 DESCRIPTION
BASE BOX MAIN FRAME URR MAIN FRAME URL LOWER BEAM UPPER BEAM HOOFR HOOF L ASSY CASH BOX DOOR CASH BOX TNG REAR HATCH
LEG ADJUSTER BOLT M16X75 CASTER D51H66 FREE CASTER DS51H73 FIX CAM LOCK MASTER W/O KEY
FLG NUT 6 HEX BLT W/S M6X20 FLT WSHR 6.5-20X1.6 FLG NUT M4 S-TITE SCR PH W/F M4X8 M SCR FH M3X10 HEXNUT M16
ASSY CASH BOX DOOR (HOT- 1200)
ITEM NO. PART NO. DESCRIPTION
1 HOT-1201 CASH BOX DOOR 3 220-5574 CAM LOCK W/KEYS 4 HOT-1203 CENTER TNG 5 HOT-1204 SIDE TNG
202 065-E00300 ERING 3MM
ASSY CC BOX WW (CTA-1150)
an *s deo
@@)
ITEM NO.
Rene PART NO.
CTA-1151 DP-1167 CTA-1153 CTA-1160
97-1003-05 220-5575 DESCRIPTION
CC BOX WW TNG LKG CHUTE W SW UNIT
ASSY C.C.CHUTE DOOR CAM LOCK MASTER W/O KEY
ASSY SW UNIT (CTA-1160)
ITEM NO. ‘S) 8) =) OB
© OH PO
PART NO.
CTA-1161
220-5179 601-0042 509-5028 DESCRIPTION
SW BRKT
VOL CONT B-5K OHM KNOB 22MM SW PB IM
ASSY CRT COVER (NOA-1200)
ITEM NO. PART NO. DESCRIPTION
1 NOA-1201 CRT COVER 2 NOA-1202 SPEAKER BOX
101 130-5205 SPEAKER 40HM 10W 100 W/SHIELD
201 000-P00410-W M SCR PH W/FS M4X10
ASSY BILLBOARD (NOA-1300)
ITEM NO. PART NO.
NOA-1301 NOA-1302
008-t00408-0C DESCRIPTION
BILLBOARD PLATE BILLBOARD SHEET
TMP PRF SCR TH CRM M4X8
ASSY FRONT PANEL (CTA-1400)
ITEM NO. PART NO. DESCRIPTION
1 NOA-1501 FRONT PANEL 2 NOA-1502-01 MASK MS9 3 NOA-1503 LIGHT COVER 4 NOA-1504 PRISM PLATE 5 NOA-1505 LID GCS 6 NOA-1506 LID VMS 7 NOA-1507 EMBLEM NAOMI
201 000-P00416-W M SCR PH W/FS M4X12 202 012-P00416 TAP SCR #2 PH 4X16
ASSY AC UNIT (NOC-1700)
ITEM NO. PART NO.
NOB-1701
509-5876 214-0202 512-5046-5000
000-P00308-W 050-H00400 060-F00400 060-S00400 DESCRIPTION
AC BRKT
LOCKER SW JW-L21RKK AC INLET PANEL TYPE C.P. S000MA CE UL
M SCR PH W/FS M3X8 HEX NUT M4 FLT WSHR M4 SPR WSHR M4
ASSY CONTROL BOX ( )
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
ASSY CONTROL PANEL (NOA- 20001)
ITEM NO. SEA
PART NO.
NOA-2002 NOA-2003
610-6723-4C01 509-5756-01 509-5755-01
050-U00400 060-F00400 060-S00400 050-H00400 DESCRIPTION
CTRL PNL BASE 2A6B CTRL PNL PLATE 2A6B
ASSY ANALOG JOY 4C GREEN SW PB D24 YELLOW SW PB D30 GREEN
U NUT M4 FLT WSHR M4 SPR WSHR M4 HEX NUT M4
ASSY ELEC (NOA-4000)
ITEM NO. PART NO.
NOA-4001
400-5397 560-5407-UL 838-13616 838-11856-UL 509-5876 601-6231-B60
010-P00406-F 010-P00306-F 010-P00320-F DESCRIPTION
ELEC BASE
SW REGU FOR JVS AUDIO XFMR 120V 17V2.1AX2 AUDIO POWER AMP 2 CH CONNECT BD UL LOCKER SW JW-L21IRKK EDGING NEW TYPE L=60
S-TITE SCR PH W/F M4X6 S-TITE SCR PH W/F M3X6 S-TITE SCR PH W/F M3X20
ASSY MAIN BD (CTA-4100)
1012 102
ITEM NO. PART NO. DESCRIPTION
1 NOA-4101 WOODEN BASE MAIN 2 840-0021D-01 ASSY CASE NAO NBA USA
101 838-13616 AUDIO POWER AMP 2CH 102 838-13739 SW BD NAOMICABINET 103 560-5413-V XFMR 100V 12.8V6.3A
201 000-P00408-W M SCR PH W/FS M4X8
ASSY SHIELD CASE NAO NBA (840-0021D-01)
ITEM NO. PART NO. DESCRIPTION
1 840-0021A-01 SHIELD CASE NBA NAO USA 2 840-0021C ROM CASE NAO
ASSY XFMR (NOA-4100)
ITEM NO. in the slash mark portions.
PART NO. DESCRIPTION
NOB-4101 XFMR BASE
560-5426-V XFMR 100-120V 100V5.5A 514-5093 FUSE HOLDER F-64AB COVER LOCAL PURCHASE FUSE 5000MA,
000-P00416-W MSCR PH W/FS M4X16 011-T03512 TAP SCR TH 3.5X12 011-P00312 TAP SCR PH 3X12
VISIT OUR SERVICE WEBSITE!
fal ig se BA@seaass B ix] ww) 0 To. Bp fnttp:/Aeww seuser ice comm /SEGASERVICE /ivainpage html ] Gaal what's Retated
LY2K COMPLIANCE]
Sega Enterprises |nc,,U5A Service Department Phone (650)-632-7580 Fax (650)-632- 7594
Best Viewed with I It li Sulletina Pert Numbers] tors|
Coin-Op Links: Star Tech Journal
Amusement industry Mega Site
if you have any questions about this Home Page please E-Mail ta:
dari. davidson@seu.sega.cam OR han. rockhili@seu.sega.com A total of BROWSE) people have accessed this page.
WebStaR 3h CL
SEGA ENTERPRISES, INC. (USA)
45133 Industrial Drive Fremont, CA 94538 (650) 632-7580 phone (650) 632-7594 fax