Eliminator
Eliminator (2 Players, set 1) (Gremlin, 1981) · Manual · 73 pages · 5 sections · original scan
[ Owner’s Manual / Bs Part No. ee /
OPERATING INSTRUCTIONS
AND
SERVICE MANUAL
MANUFACTURED BY
SEGA/GREMLIN TLX 910-335-1621
ELIMINATOR OWNER'S MANUAL Copyright - 1981 by SEGA/Gremlin, All Rights Reserved
INTRODUCTION
ELIMINATOR is an electronic game that makes extensive use of digital
integrated circuitry and television monitor concepts. This manual is
designed for the mafntenance technician who pussesses a general knowledge
of solid state circuitry, microprocessor and digital integrated circuitry
and TV monitor concepts. Any individual not knowledgeable in these areas
should not attempt repair of the electronic portion of the game. For
detailed G-80 troubleshooting and theory, refer to the X-¥ Color Monitor
Manual, Service School Manual and Service Video Tapes.
Gremlin's G-80 system makes troubleshooting easy. Each board has
a@ separate function and most problems can immediately be isolated to a
single board. The individual boards contain less circuitry than if they
were combined a or two boards. This results in faster and easier
servicing. The 6-80 system gives Gremlin a lot more flexibility in designing
new games. Increased ROM capability means that new Gremlin games will be
more exciting and even more profitable. If you have any questions not
answered in this manual, call SFGA/Gremlin Customer Service, 800-854-1098.
GAME CONCEPT
ELIMINATOR is a one or two player game in which players try to déstroy
the Eliminator. The Eliminator stays within the eliminator base a fixed
amount of time. The Eliminator cannot be hit until it is well clear of
the eliminator base, because there is a protective shield around it. The
eliminator base floats in a random motion around the screen, It is difficult
for players to predict the oliminator base's Floating motion. The eliminator
is capable of shooting fireballs at a player's ship. The pursuit speed of
the eliminator, the firing frequency and speed of its fireballs is
controlled in a manner which makes the game more and more difficult as
the rounds progress. Once the eliminator leaves the base, it is destroyed
by one of two methods: '
- Colliding with the base.
- Colliding with a player's ship, thus destroying the ship and the
eliminator.
Once the eliminator ship. is destroyed, another one reappears in the
center of the base, and another countdown begins for the emergence of the
new eliminator ship. fighter ships roam the screen in a one player game.
In a two player game, fighter ships are not used, until one player loses
all his ships. Then the game switches to the one player mode with fighters.
Fighter ships are destroyed by running into the eliminator base, or being
hit by the eliminator fircball. Only contact with the eliminator base or
the eliminator fireball destroys fichter.
Game Action
Players try to line their ship up to shoot directly into the eliminator
base tunnel. Once this shot is made, it breaks up the eliminator base,
destroys the eliminator and the round is over. This shot is worth bonus
points. Making the tunnel shot also increases al! point values. Players
must avoid contact with the surface of the eliminator base, because this
will cause the player's ship to explode. Electrons flow around the eliminator
ship for a specific amount of time, and then the eliminator comes out onto
the playing area.
In a two player game, no fighters are present. When one of the players
is eliminated from the game, several fighters are instantly added to the battle
and the remaining player continues the game in the single player mode. The
main objective in the game is to explode the eliminator base, which ends the
game and point accumulation takes place. As the rounds progress, it is more
difficult to reach this objective, because gf the increase in rotational and
translational speed of the base, and the increased speed and firepower of the
eliminator ship. "Game action is completed when both players have lost all
their ships.
Scoring
| Round | i | 2 | 3 | 4 | 5 | |
| Player Ship and Fighters | Hit | 50 | 100 | 150 | 200 | 250 |
| Destroy 100 | 150 | 200 | 250 | 300 | ||
| Eliminator Ship | Hit | 100 | 150 | 200 | 250 | 300 |
| Destroy 150 | 200 | 250 | 300 | 350 | ||
| Tunnel Shot | Ship | 500 | 1000 | 1500 | 2000 | 2500 |
Inside Base
| Ship | 750 | 1500 | 2250 | 3000 | 3750 |
Outside Base
GAME SET-UP AND INSPECTION
- inspection
“a) Before plugging in your new game, inspect it closely to spot any
possible shipping damage. Check to ensure the graphics are in place, the
monitor is not damaged and that the overall cabinet is in good condition.
- Open the coin mechanism door and inspect the inside of the game
electronics compartment Re cure na eamponents or connectors have come
loose. Proper connector fittings must be checked before game power is
applied. Check all related connectors for good contact. Although
disconnected connectors are easily spotted, poor contacts are difficult
to locate. The connectors should therefore be pushed in firmly and then
loosened to spot poor connections. i
- Check to ensure the fuses are intact. There are five fuses (not
counting the monitor fuses which are detailed in the monitor manual for
this game). One fuse is located on the AC junction box. The other four
are on the power supply PC board.
- Voltage Selection
Before plugging in your game, make sure that the game voltage is
correct for your location. Locate the two leads from the AC junction box
to the power transformer. For 110 VAC, they should be connected to terminals
1 and 3 on the power transformer. For 100 VAC, connect 1 and 2, and for 220
VAC applications, they shuuld be connected to 1 and 4, You will also notice
on the AC junction box that there is a safety interlock switch. When the
front panel is in place the switch is depressed and the game receives power
Removing the front panel, the switch returns to Its original position and the
power is cut off from the game. For servicing, this switch can be pulted out
and power will be restored.
- Gome Specifications
Power 100 VAC, 60HZ (nominal), 150 watts maximum
110 VAC, 60HZ (nominal), 150 watts maximum
220 VAC, 60HZ (nominal), 150 watts maximum
Dimensions 253 inches wide X 30 inches depth (64.8 cm wide X
76.8 cm depth)
724 inches height (184.2 cm height)
4, Important Notes
- The following note is included in compliance with FCC rules:
energy and if not_ installed and used in accordance with the instruction
manual, may cause interference to radio communications. As temporarily
permitted by regulations, it has not been tested for compliance with the
limits for Class A computing devices pursuant to Subpart J of Part 15 FCC
Rules, which are designed to provide reasonable protection against
interterence in which case the user at his own expense will be required
to take whatever measures may be required to correct the interference.
- Miscellaneous
NEVER remove circuit hoard connections while power is on.
NEVER replace any components with anything other than exact replacement
parts.
DO NOT replace fuses with anything other than proper value. A blown fuse
indicates an overload condition within the game. Replacing the fuse with
a higher value can cause damage to internal components, if an overload
occurs.
CORRESPONDENCE regarding this game should be addressed to:
SEGA/Gremlin 8401 Aero Orive | San Diego, California 92123 Attn: Customer Service
- Control Panel Removal
With the door to the game electronics compartment open, reach under the
control panel and flip the fasteners on both sides of the control panel. The
control panel will now swing outwards. Disconnect the control panel harness, -
slide the spring-loaded pins on both sides and remove the control panel.
- Front Plexiglass, Interior Graphics and Graphics Frame Removal
The front plexiglass, which secures the interior graphics, is held in
place by the control panel. Release the fasteners on the control pane! and
swing it down. Directly under the front plexiglass, you will notice a small
frame support piece. Grab it by the hand slot in the middie and pull it from
the game. The front plexigiass can now be removed easily by lifting it on the
bottom slightly and pulling it outward. The interior graphics can now be fe-
moved. You will also see the graphics frame, which is located directly behind
the interior graphics. %t must be remaved when taking out the monitor. To
remove the graphics frame, simply grip two sides and carefully lift out.
- fard Cage Remaval
lf it is necessary to remove the card cage for servicing, first disconnect
all the connectors. ihen remove the three mounting screws, located on the
front bracket. The card cage can now be slipped from under the rear bracket
and removed from the game.
- Logo Panel Removal
Underneath the logo panel are four mounting screws. Remove these and the
Yegu pene? can be Vifred from Its slot. With the lago panel removed, easy acces:
is gained to the speaker and fluorescent lamp assemblies for servicing. '
- Monitor Removal
To remove the monitor for servicing or replacement, first open the rear
Panel on the cabinet and disconnect the power cable and video cable to the
monitor. Then, remove the front plexiglass, interior graphics and graphics
frame as explained earlier. Remove the four bolts in each corner of the
monitor board. Now grasp the board by the hand holds provided at top and
bottom and pul! the monitor from the cabinet.
SELF-TEST
The G-80 system contains a built-in self-test system, activated by
depressing the red self-test switch located on the CPU Board. If the cover
to the G-80 card cage is in place, the switch can be activated by putting
@ pen or pencil through the hole provided on the cover.
Basic diagnostics test sequence:
- CPU RAM
- Maskable interrupts
+ First 1K of game ROMs
. Video RAM and Hardware multiplier
+ Player start buttons
- Display screen (visual)
- All game ROMs
- System inputs
- Game controls
- Sounds/Voice
Individualized diagnostics descriptions and procedures:
- CPU RAM --tests all RAM on CPU card before proceeding, system needs to
use this RAM for stack and variables during other tests so if any locations
are bad processor will halt (halt light will come on).
Z. Maskable interrupts - video interrupt is enabled through output port bit
and all maskable interrupts are enabled inside processor, CPU then executes
several HALT instructions to insure that at least one edge triggered interrupt
has occured. if no interrupts occur during this test the halt light will
remain on constantly. This is the same result as a bad CPU RAM. This
ambiguity can be eliminated by checking the vertical interrupt another way.
The system reset/power-up logic will also halt if the video interrupt is
not functioning, to try this press the RESET switch.
- First 1K of game ROMs - the first 1K of the first game ROM will be
checked for validity. tf this portion of the first ROM is bad the system
will not be able to proceed because vital information defining parameters
of the game are stored in this first 1K. Jf an error occurs during this
validity check, the CPU will hand up and repeatedly flash the halt light.
4, Video RAM and Hardware multiplier - the video RAM is tested first and
in the event that it tests good then the hardware multiplier is checked,
if the video RAM is good, the message ''ALL VIDEO RAM GOOD, MULTIPLIER GOOD"
appears. If a bad video RAM chip is found, then the message ''BAD VIDEO RAM,
CHEP U##"! appears on the screen along with that chip's location. Oue to the
fact that sometimes a bad video chip causes the display to be erratic, the
system also flashes out the bad chip's location on the halt light, over and
over again separating the U#s with a one second on pulse.
The hardware multiplier is used in the game to multiply two 8 bit numbers
together to form one 16 bit product. This test performs a select group of
multiplications, over 2,000 multiplications in actuality, designed to
thoroughly exercise the process of multiplication between the software and
the hardware multiplier. The messages ''GO0D" or ''BAD'' are the only indication
of functionality with respect to this test.
- Player start buttons - une of the two “yame start" pusli buttons on the
front of the cabinet is very special. The "one player start'’ button was
designated by the system as a way to terminate the test that is currently
being run. The reason that these two buttons were tested relatively early
in the sequence, was so that the remaining tests could use the ‘'one player
start" button for a termination signal. To be sure that these two buttons
are functioning properly, see that when untouched the status indicated is
Nol (For open ewiteh contact) and that when pushed ar depressed momentarily
the indicated status is ''C"’ (for closed switch contact) during the time the
button is down. This notation for switches being in the open or closed
state, "0" or "C", will be used throughout the diagnostic sequence whenever
the status of a switch is being displayed on the screen.
- Screen - this test is supplicd by the game logic, external to the CPU ROM,
to provide a visual indication of how well the display screen is functioning.
It tests beam deflection and colors to check that all electron guns are
functioning. In the display, you should see some sort of test showing the
colors white, red, green and blue.
- ALI game ROMs - the intent of this test was to insure the integrity of
all of the data in all of the game ROMs. At the time the ROMs for a game
were originally generated there was an algorithm performed on each 1K block
of data. Each of these calculations, a form of CRC (cyclic redundancy check,
similar to a checksum), produced one 16-bit word. These words are stored,
along with a Gremlin part number, in the first ROM. When this test is run,
all of these 16-bit CRC words are regenerated and are compared to the known
values stored in the table in the first ROM. If one of these newly calculated
values does not match its corresponding stored value, then the system kicks
out an error which amounts to the message ''BAD ROM'' followed by one or more
bad part numbers of that KUM that was found In mis-match. If all ROM> are
good the screen displays: ''ALL ROMS GOOD'', Then the system quickly proceeds
on to the next test.
- System inputs - these inouts are referred to as ‘system inputs', simply
because they control system functions, such as credit accumulation, coinage
options, game configuration, etc. The diagnostic user may check to see
ah
that the coin switches, service switch, and option dip switches are functioning
properly. The open and closed switch notation applies here as described
earlier.
- me controls - the names of the controls that the game player would use
to control the action on the screen is what this test was designed to check.
Make sure that when hands are off of the controls all of the switches are
open, When a particular control is twisted, pushed, turned or in whatever
way activated, watch to see that the status of that control, and only that
particular control, changes to reflect the action on the control panel. The
screen should display from open ta clnsed.
- Sounds - just sit back, listen and watch this one. Al) of the
sounds made by the game will be produced and their respective names will
appear in the center of the screen. The termination button acts sluggish
during this test due to the fact that some of the sounds must be created by
subroutines external to the CPU ROM. After completion of this test, the
system will return to the advertising mode.
ELIMINATOR OPTION SWITCH SETTINGS
OPTION SWITCH #1
| 1 | 2 | 3 | |
| 5 Ship Game | x | x | x |
| 4 Ship Game | x | x | Xx |
| 3 Ship Game | x | x | x |
| Game Difficulty: Hardest | x | x | i) |
| Hard | x | x | 0 |
| Medium | x | x | c |
| No Free Ships. | 0 | 0 | x |
| One Free Ship AL. 10,000 | 0 | c | x |
| 20,000 | c | tt) | x |
| 30,000 | c | c | x |
Coin/Credit Options - Switch #2
Coin/Credit
WUE
NE BUN
Wewne
BUN coin/1
coin/1
coin/1
coin/1
coin/2
coin/3
coin/4
coin/S
coin/6
coin/1 coin/2 coin/3
coin/1 coin/3
coin/1 coin/2 coin/3 coin/4 coin/6
coin/1 coin/2 coin/3 coin/5
coin/1 coin/3
coin/2 coin/4 coin/6 coin/8 coin/11 credit
coin/2 coin/4 coin/6 coin/9 credit
credit
credit
credit
credit
credit
credit
credit
credit
credit credit credit
credit credit
credit credit credit credit credit
credit credit credit credit
credit credit
credit credit credit credit
credit credit credit credit
X= Don't Care oA 00 8F 4 &
i
aD a Oo c
Cc
fe}
c
c
c
ana 6 5 4 3 2 4
c oc ¢ c cc
Cc Cc fe} Cc Cc Cc
c c c 0 c c
c Cc o o c Cc
o c c co ¢
o c oO c Oo ¢
VU u C vu Vv Cc
0 co oo ¢
c Oo c c c oO
ec a a Cc Cc a
c Oo c¢ 0 c oO
c 0 Oo ° c oO
fol 0 Cc Cc a fa)
0 o o c 0 0
0 o c¢ 0 0 O
0 oO oO 0 0 0
O=Open C=Closed
TOP ASSEMBLY DRAWING NUMBER 700-0062
Game Speaker, 6 x 9
Speaker Lover, 6 x 9
Universal Cabinet Upright
Coin Mechanism Door Lock (& Back)
Component Board Clamp
Screw Mounted Tie Wrap
Clear Panel Monitor
Cabinet Fan Assembly
| tTEM NO. | PART NO. | QTY REQO. | DESCRIPTION |
| 1 | 130-0001 | 1 | |
| 2 | 130-0002 | 1 | |
| 3 | 140-0021 | 1 | Junction Box Cover |
| 4 | 140-0055 | 1 | |
| 5 | 220-0160 | ? | Cain Mechanism |
| 6 | 220-0167 | 2 | |
| 7 | 220-0178 | 2 | Draw Catch |
| 8 | 420-0636 | 1 | Extra Value Tag |
| 9 | 250-0038 | 1 | Molding Strip |
| 10 | 250-0048 | 1 | Clip Switch |
| n | 250-0458 | i | G-80 Cage Saddle |
| 12 | 250-0481 | 1 | Strike Plate |
| 13 | 250-0492 | 1 | Logo Panel Molding |
| 1h | 250-0497 | 2 | |
| 5 | 280-0345 | 11 | |
| 16 | 253-0232 | 1 | Panel Logo |
| 17 | 253-0222 | 2 | Coin Receptacle |
| 18 | 253-0228 | 1 | |
| 19 | 800-0297 | 1 | |
| 20 | 280-0005 | 30 | Cable Tie |
| 21 | 280-0324 | 2 | Nylon Cable Clamp |
| 22 | 280-0327 | 8 | Base Tie Wrap |
| 23 | 280-0360 | 2 | Lock Washer Lock |
| 24 | 280-0359 | 2 |
Electric Crimp Sleeve
TOP ASSEMBLY-Continued
QTY REQD. ITEM NO. PART NO.
| 25 | 390-0019 | 1 |
26 420-0028
| 27 | 420-0030 | 1 |
| 28 | 420-0041 | 1 |
| 29 | 420-0642 | 1 |
| 30 | 420-0603 | 1 |
| 31 | 420-0568 | 1 |
| 32 | 420-0624 | 1 |
33 800-0145-01 4
| 34 | RO0-01b7 | 1 |
| 35 | 800-0178 | 1 |
| 36 | 800-0190 | 1 |
| 37 | 800-0191 | 1 |
| 38 | 800-0192 | 1 |
| 39 | 800-0232 | 1 |
| 4o | 200-0025 | 1 |
| 4t | 800-0255 | 1 |
| 42 | 800-0277 | 1 |
| 43 | 800-0279 | 1 |
| hh | 800-0280 | 1 |
| 45 | 800-0284 | 1 |
| 46 | 800-0285 | i |
| a7 | 800-0286 | 1 |
DRAWING NUMBER 700-0062
DESCRIPTION
Fluorescent Lamp
serial Number Vecal
Small Serial Number Decal
Interior Graphic
Game Manual
FCC Decal
Light Baffle
AC Junction Box Assembly
Fluorescent Lamp Assembly
Power Harness Assembly
Transformer EMI Assembly
G-80 Power Supply Assembly
Speaker Harness Assembly
Interface Ground Harness Assembly
19'' Electrohome X-Y Color Monitor
AC X-Y Monitor Interface Harness Assembly
Volume Control Block Assembly
Connector Bracket Assembly
Coin Counter Assembly
Coin Mechanism Ground Harness Assembly
Game Electronics Ground Harness Assembly
G-80 Power Supply Ground Harness Assembly
TOP ASSEMBLY-Lontinued DRAWING NUMBER 700-0062
Control Panel Ground Strap Assembly
Control Panel Assembly
Game Electronics Assembly
Game Instructions Decal
Large Black Oval Phillips Machine
Screw. #8-32 x 1.750
Machine Hex Nut, #8-32
Steel Flat Washer, Std. O.D., #8
Steel Split Lock Washer, #8
Steel Flat Washer, Std. 0.D., #10
Coin Mechanism Harness Assembly
Large Machine Head Carriage Bolt,
Steel Split Lock Washer, #10
Machine Hex Nut, #10-24
Large Machine Head Carriage Bolt,
Pin Head Phillips Screw, S/M Type,
A/AB, #8-15 x .750, Large
Flat Head Phillips Screw, 82°, S/M
Type, A/AB, #6-18 x .500, Large
| ITEM _NO. | PART NO. | QTY REQD. | DESCRIPTION |
| 48 | 800-0290 | 1 | |
| 49 | 800-3167 | 1 | |
| 50 | 800-3172 | 1 | |
| 51 | 420-0641 | 1 |
52 281-0014-28 4
53 283-0024-00 4
54 284-0004-00 10
55 284-0034-00 12
56 '284-0006-00 25
| 57 | 800-0276 | 1 |
58 282-0005-20 11
#10-24 x 1.250
59 284-0036-00 45
60 283-0025-00 17
61 282 0005-24 3
#10-24 x 1.50
62 281-0044-12 8
63 281-0052-08 4
64 282-0017-24 8 Machine Head Hex Bolt, #4-20 x 1.000
TOP ASSEMBLY-Cont inued DRAWING NUMBER 700-0062
DESCRIPTION
Pin Head Phillips Screw, S/M Type,
A/AB, Black, #8-15 x .750, Large
Large Machine Head Hex Bolt,
Large 0.D. Stcel Flat Washer (Fender) #3
Self-Locking Machine Hex Nut, #4-20
Steel Split Lock Washer, #%
Pin Head Phillips Screw, S/M Type,
A/AB, #6-18 x 2.000 Large
Steel Std. 0.0. Flat Washer, #6
Pin Head Phillips Screw, S/M Type,
A/AB, #10-12 x .750 Large
Flat Washer, #10 x 3/4 ITFM NO. PART NO. QTY REQD.
65 286-0044-12 &
66 282-0017-16 2
#4-20 x 1.000
67 284-0027-00 14
68 283-0007-00 4
69 284-0037-00 10
70 281-0042-32 6
7 284 0002 00 4 f 72 281-0045-12 27
73 284-0006-00 12
74 281-0074-12 11
283-0015-001 1 Flat Head Phillips Screw, Large,
#8-15 x .75, 82°
Machine Wing, #10-24
Top Assembly 700-0062
Top Assembly 700-0062
es) @) J CB mC) ses
ey OO es @ SECTION 8-8 @
@-GO CAGC UNIVERSAL ASSCMBLY DRAWING NUMBER 800-0296
G-80 Cage Assembly
6-Stot Master Board
Sheet Metal Screw, Type AB, #10 x 4
Pin Head Phillips Machine Screw, #4-40x
Pin Head Phillips Machine Screw, #4-40.
| ITEM NO. | PART NO. | QTY REQD. | DESCRIPTION |
| 1 | 250-0456 | i | |
| 2 | 250-0499 | 2 | G-80 Cage Bracket |
| 3 | 280-0343 | 1 | Split Grommet |
| 4 | 420-0560 | 1 | Test Button Decal |
| 5 | 800-0105 | 1 |
6 6
7 4
| 9 | 4 | Flat Washer, #4 |
G-80 Cage Universal Assembly 800-0296
GAMF FIFCTRONICS ASSFMBI Y DRAWING NUMBFR 800-3177
Game Electronics Decal
X-Y Interface Cable
X-V Timing Raard Assembly
X-¥ Control Board Assembly
Sound Board Assembly
Master Interface Harness Assembly
X-Y Video Interface Harness Assembly
G-8G liniversal Card Cage Assembly
G-80 2716 EPROM Board Assembly
Jumper Plug Assembly
| TEM NO. | PART_NO. | QTY REQD. | DESCRIPTION |
| t | 420-0643 | 1 | |
| 2 | 600-0089 | 1 | |
| 3 | RNON-AtAI | 1 | |
| 4 | 800-0163 | 1 | |
| 5 | 800-3174 | 1 | |
| 6 | 800-0281 | 1 | |
| 7 | 800-0282 | 1 | |
| R | Ran-n796 | 1 | |
| 9 | 800-3156 | 1 | |
| 10 | 8000302 | 1 | |
| W | 800-3157 | 1 | CPU Board Assembly |
Game Electronics Assembly 800-3172
i‘
ASSEMBLY CPU BOARD DRAWING NUMBER 800-0107
| (TEM NO. | PART NO. | QTY REQO. | DESCRIPTION |
| 1 | 150-0088 | 3 | CAP — 10 uf 25V |
| 2 | 151-0005 | 1 | CAP CER 680 pf 50V |
| 3 | 151-0012 | 1 | CAP CER .| uf 50V |
| 4 | 151-9020 | i | CAP CER 33 pf SOV |
| 5 | 151-0060 | 21 | CAP CER .I uf 16V AX |
| 6 | 151-0061 | 36 | CAP CER 220 pf 16V AX |
| 7 | 170-0194 | i | PC BOARD |
| 8 | 211-0008 | 4 | CONN PIN TEST PT |
| 9 | 212-0098 | 4 | CONN M 10 PIN RTA |
| 10 | 230-0013 | 1 | XTAL 8.000 MHZ |
| i | 314-0001 | t | 1C NES5S |
| 12 | 314-0015 | 1 | 1c 7404 |
| 13 | 314-0018 | 4 | 1c 74.800 |
| 14 | 314-0019 | 1 | tc 74LS04 |
| 5 | 314-0055 | 3 | tc 7bLS744 |
| 16 | 314-0058 | 1 | 1c 74LS08 |
| 17 | 314-0062 | 5 | Ic 74LS74 |
| 18 | 314-0066 | i} | Ic /4us2s |
| 19 | 314-0067 | 1 | IC 741830 |
| 20 | 314-0068 | 2 | IC 74LS32 |
| 21 | 314-0078 | 1 | Ic 74LS02 |
| 22 | 314-0083 | 1 | 1c 74LS240 |
| 23 | 314-0085 | 2 | 1C 74LS14 |
| 24 | 314-0087 | 1 | Ic 74L$139 |
REF. DES.
C43, C46, C6Z
c50
C47
cho
€37-c42, Ch4, ChE C51-C6l, C63, C6
CI-C36
TPI-TP4
vl
Ul2
u30 %
u6é, UB, UI4, UI9
u18
U34. U36, U38
ul3
UO, UIT, Ul7, W u39
UI6
U37
U32, U33
U23
U4
U7, U3I
u24
ASSEMBLY CPU BOARD-Cont inued
(TEM NO.
3h
ay
4h
‘ug
4g PART NO.
314-0093
314-0099
314-0105
315-0041
315-0046
315-0050
316-0764
390-0003
471-0101
471-0102
471-0103
471-0104
471-0122
471-0220
471-0221
471-0331
477-0002
421-0001
481-0006
482-0006
482-0010
482-0014
510 0052
510-0053 QTY REQD.
i DRAWING NUMBER 800-0107
DESCRIPTION
Ic 7ALS37h
IC 74LS245
{C 74LS253
ic Z80A
1c 2104
1c 2516 (2716)
IC PROM 32x8
LED RED
RES 100 OHM 1/2W 5%
RES 1K OHM 1/2W 5%
RES 10K OHM 1/2W 5%
RES 100K OHM 1/2W 5%
RES 1.2K OHM 1/2W 5%
RES 22 OHM 1/2W 5%
RES 220 OHM I/2W 5%
RES 330 OHM 1/2W 5%
RES PACK 15X2.2K
DrAnF IN4SAN?
DIODE INSTA/ INE 4S
XSTR 2N4403
XSTR PE8050
XSTR 2N4401
SWITCH PIANO DIP
SW PUSHBUTTON SIDE PCM REF OES. U3 ,
U35
Ul, U2, US, U9
U22
U26-U29
U2z5
Ul5
D3
R5
Rl, R3
R6
R7, R8, R22
R12
Rid
R2, R4, RIS
R10, RIE, RI5S-R20
RP1-RP3
nt. n7
pa
Qa
Ql, Q2
03-06, 98
SWI
SwW3
ASSEMBLY CPU BOARD-Cont inued
SKT 24 PIN QUAL INLN
SKT 18 PiN DUAL iNLN
SKT 16 PIN DUAL INLN
SKT 40 PIN DUAL INLN
RES 4.7K OHM 1/2W 5%
RES 47K OHM 1/2W 5%
| ITEM NO. | PART NO. | Qty RCQD. | OCSCRIPTION |
50 213-0001
| 51 | 213-0002 | 4 | |
| 52 | 213-0004 | i | |
| 53 | 213-0005 | 2 | |
| 54 | 510-0049 | i | swtTcH 8 POS DIP |
| 55 | 471-0472 | ] | |
| 56 | 280-0330 | 2 | CARD EJECTOR |
57 471-0473
| 58 | 151-0031 | 1 | CAP CER .22 uf 16V |
ORAWING NUHBER SOU-010)
REF DES.
xU25
xU26-XU29
XUI5
xU21, XU22
Sw2
R21
chs
co Gea Ob ONERoG “ 90308
C3 geo agen age oe dt ita UU a
mini [ > G00 00 = i meal nn i oe GE. [Ft in é N [| CPU Board Assembly 800-0107
SOUND BOARD ASSEHBLY DRAWING NUMBER 800-317!
Electrolytic Capacitor,
Clectrolytic Capacitor,
Electrolytic Capacitor,
Electrolytic Capacitor,
Electrolytic Capacitor,
Ceramic Capacitor, .O5uf, 50V
Ceramic Capacitor, 100pf, 50V
Ceramic Uapacitor,.OUluf,
Ceramic Capacitor, .luf, 50V
| (TEM NO. | PART NO. | QTY REQD. | DESCRIPTION |
| 1 | 150-0087 | 2 |
- Juf, 25V RDL
| 2 | 150-0088 | 4 |
10uf, 25V ROL
| 3 | 150-0090 | 1 |
33uf, 25V RDL
| 4 | 150-0099 | 1 |
luf, 50V
| 5 | 150-0100 | 2 |
' 2.2uf, 50V
| 6 | 151-0001 | 4 | |
| 7 | 151-0002 | 1 | |
| 8 | 151-0008 | 1 | |
| 9 | 151-0012 | 35 | |
| 10 | 452-0001 | 6 | Film Capacitor, |
-luf, 100V REF DES.
c1,C38
Ch ,c8,C3;
C73
c56
C35
C21,C36
C48, 050-0
c63
cé60
€2,C3,C5,
C12,C22-¢
€31.032,0
C41 Chat
C53-C55,0
€57,C59,¢
C64,C70-t
c74-C77
€13,C14,¢
C34 C58,
SOUND BUAKU ASSEMBLY-Continued OKAWING NUMBER 800-3174
| ITEM NO. | PART_NO. | QTY REQD. | DESCRIPTION |
| " | 152-0007 | 1 | Film Capacitor, |
-001uf, 250V
| 12 | 152-0010 | 3 | Film Capacitor, |
-022uf, 100V
| 13 | 152-0035 | i | Film Capacitor, |
-O33uf, 100V
| 14 | 152-0037 | 9 | Film Capacitor, |
-068uf, 100V
| 15 | 152-0038 | 2 | Fitm Capacitor, |
' -047uf, 100V
| 16 | 152-0039 | 3 | Film Capacitor, |
-Oluf, 100V
| 17 | 170-0234 | 1 | PC Board |
| 18 | 212-0101 | 1 | 4-Pin M RTA Connector |
| 19 | 213-0012 | 1 | 28-Pin Dual Inline Socket |
| 20 | 280-0330 | 2 | Card Ejector |
| 21 | 313-0005 | 1 | IC LMS66CN |
| 22 | 313-0037 | 4 | IC TLO81 |
| 23 | 313-0038 | 3 | Ic TLOB2 |
| 24 | 313-0046 | 8 | Ic CA3080£ |
| 25 | 314-0001 | 2 | IC NE555 |
REF DES.
C7
C30, C46 , C66
ch3
C10,CHl,
C€15-C20,C61
Ch7 C67
£9,065,C68
XU30
U25
U1,U3,U12,
U29
U2,U16,U20
ue u11,uI4,
UIs
U5,U13
SOUND BOARD ASSEMBLY-Concinucd DRAWING NUMBER 800 3174
| ITEM NO. | PART NO. | QTY REQD. | DESCRIPTION |
| 26 | 314-0018 | 1 | Ic 74LS00 |
| 27 | 314-0040 | 1 | Ie 74.8125 |
| 28 | 314-0042 | 1 | 1c 7406 |
| 29 | 314-0043 | 2 | 1¢ 7407 |
| 30 | 314-0058 | 1 | 1€ 74LS08 |
| 31 | 314-0059 | 1 | Ic 74LS10 |
| 32 | 314-0062 | 1 | Ic 74LS74 |
| 33 | 314-0067 | 1 | 1G 74L530 |
| 34 | 314-0085 | 2 | Ic 74LS14 |
| 35 | 314-0093 | 2 | IC 74L$374 |
| 36 | 315-0007 | 4 | Ic CD4O11A |
| 37 | 315-0035 | 1 | 1C_MM5837 |
| 38 | 315-0043 | 2 | IC CD4069A |
| 39 | 315-0052 | 2 | IC CD4024A |
| 4O | 471-0102 | 16 | Resistor, 1K ohm, 3W 5% |
| AL | 471-0103 | 22 | Resistor, 10K ohm, 3W 5% |
REF DES.
u26
U33
u24
U27 ,U28
U39
U37
U36
uso
U38,U41
U34,U35
U17-U19,U22
us
U31,U32
U21,U23
R19,R31,R35,
R40,R43.R51-
R53,R55-R57,
R63,R69,R72,
R80,R131
R5,R8,R10,
R17,R18,R70,
R22,R44,R60,
R76-R78,R94,
|S)UND BOARD ASSEMBLY-Continued DRAWING NUMBER 800-3174
DESCRIPTION
| 1fEM NO. | PART NO. | QTY REQD. |
y
| 42 | 471-0104 | rs | Resistor, 100K ohm, LW 5% |
'
| 43 | 471-0105 | 8 | Resistor, 1M ohm, 2W 5% |
| A | 471-0153 | 2 | Resistor, 15K ohm, 3W 5% |
| 45 | 47\-OTD4 | 2 | Resistor, 150K ohm, 3W 5% |
| 46 | 471-0155 | 2 | Resistor, 1.5M ohm, 4W 5% |
| 47 | 471-0202 | 3 | Resistor, 2K ohm 4W 5% |
| 4B | 471-0205 | 1 | Resistor. 2M ohm, $W 5% |
| 49 | 471-0222 | 1 | Resistor, 2.2K ohm, $W 5% |
| 50 | 471-0223 | 1 | Resistor, 22K ohm, 4W 5% |
REF NES.
R95,R99,R100,
R105,R126,
R134,R135,
R137 ,R138
R1,R1S,R16,
R21,R67,R68,
RIT1,RI14,
R118-R120,
R123,R125,
Riad
R2,R12,R91,
R93,R113,
R115-R117
R90, R104
R64,R75
R36, R81
R47 ,R54,R59
R79
R4,R11,RB4-
K89,KI09,
Rt10,R147
R3,R30,R34,
R29, R46 R50.
R92,R96,R127,
SOUND BOARD ASSEMBLY-Continued DRAWING NUMBER 800-3174
Resistor, 220K ohm, 3W 5%
Resistor, 2.2M ohm, 3W 5%
Resistor, 270K ohm, 3W 5%
Resistor, 33K ohm, 3W 5%
Resistor, 330K ohm, 4W 5%
Resistor, 39K ohm, 3W 5%
Resistor, 390K ohm. 3W 5%
Resistor, 470 ohm, 3W 5%
Resistor, 4./K ohm, 4W 5%
Resistor, 47K ohm, iW 5%
Resistor, 470K ohm, 3W 5%
Resistor, 680 ohm, 4W 5%
Resistor, 6.8K ohm, 3W 5%
Resistor, 68K ohm, 3W 5%
Resistor, 680K ohm, 3W 5%
| ITEM_NO. | PART_NO. | QTY_REQD, | DESCRIPTION |
| 51 | 471-0224 | 7 | |
| 52 | 471-0225 | 5 | |
| 53 | 471-0274 | 2 | |
| 5h | 471-0333 | 6 | |
| 55 | 471-0334 | 3 | |
| 56 | 471-0393 | 2 | |
| 57 | 471-0394 | 2 | |
| 58 | 471-0471 | 2 | |
| bY | HALON fZ | 3 | |
| 60 | 471-0473 | 3 | |
| 61 | 471-0474 | 4 | |
| 62 | 471-0681 | 1 | |
| 63 | 4/1-0682 | 3 | |
| 64 | 471-0683 | 2 | |
| 65 | 471-0684 | 4 |
REF DES.
R130,R146
R6,R7,R25,
R62,R122,
K132,K041
RAT, RAZ,RI?
R1217,R124
R71.R140
RQ,R28,R38,
KAY, R58, K66
R13,R139,R14
R97 ,R128
R65.R74
R82,R83
KZ5,RID/, Rie
R32,R45,R61
R14,R26,R27,
R70
R133
R3/,R4B,RI0Z
R29,R145
R73,R106,
R136.R143
SOUND BOARD ASSEMBLY-Continued DRAWING NUMRFR &nN-3174
Resistor, 82K ohm, 3W 5%
Resistor, 910 ohm, $W 5%
Resistor, 9.1K ohm, EW 5%
| Liem NO. | PART NO. | QTY REQD. | DESCRIPTION |
| 66 | 474-0823 | 3 | |
| 67 | 471-0911 | 1 | |
| 68 | 471-0912 | 1 | |
| 69 | 481-0001 | 1 | Diode 1N4002 |
| 70 | 481-0006 | 7 | Diode IN914/IN4148 |
| 71 | 482-0006 | 10 | Transistor 2N4403 |
| 72 | 482-0023 | 1 | Transistor 2N4093 |
REF OES.
R33,R98,R129
R101
R103
01-07
Q2-Q11
Qi
800-3174 Sound Board Assembly
- pes oat ace a= SF) om
a) =) Bo
a 1 Or oe SB Otte oy i ama
G-80 2716 EPROM BOARD ASSEMBLY DRAWING NUMBER 800-0151
| (TEM NO. | PART NO. | QTY REQD. | DESCRIPTION |
| 1 | 151-0058 | 13 | Ceramic Capacitor, |
.Oluf, 16V AX
| 2 | 151-0060 | 15 | Ceramic Capacitor, |
«luf. 16V AX
| a | 17040211 | ’ | PC Board |
| a | 213-0001 | 23 | 24-Pin Dual Inline Socket |
| a | 314-0055 | 1 | IC 74LS244 |
| 5 | 314-0058 | 3 | IC 74LS08 |
| i | 314-0059 | 1 | 1c 74LS10 |
| : | 314-010 | Ic 74LS138 | |
| 314-0120 | 1 | Ic 7ALStSh | |
| “10 | 211-0008 | 3 | Test Point Connector Pin |
| W | 150-0088 | 1 | Electrolytic Capacitor, |
™~ louf, 25V
| 12 | 280-0330 | 2 | Card Ejector |
REF DES.
€2,C4,C6,
c8,c9,Ctl,
€14,€16,C18
621,€23,C25,
C27
C1,C3,€5,C7,
€10,C12,¢13,
€15,C17,€19,
€z0,022,024,
C26 C28
XU!-XU23
U25
U26-U28
u29
U30
U2h
TP1-TP3
c29
G-80 2716 Eprom Board Assembly 800-0151
N = a 4 L 1} Se 4 = -S et ae ty yO, j —- I ] alo & 7 gc a = ‘y! 4 i }
ITEM NO. INET FAN ASSEMBLY
PART NO.
260-0001
211-0078
280-0005
211-0044 QTY REQD. DRAWING NUMBER 800-0297
DESCRIPTION
Axial Cooling Fan, 110V
Connector Terminal Pin, 20-14 AWG
Cable Tie
2-Pin Cap Amp Connector
52.00 —»| C i32td
A\ 3.00 —w C76]
SOLDER WIRE CONNECTION 2 PL VIEWED ‘RING END Pu 7260 FR
ZN
CONTROL PANEL ASSEMBLY DRAWING NUMBER 800-3167
| ITEM NO. | PART NO. | QTY REQD. | DESCRIPTION |
| 1 | 240-0006 | 2 | Red Button Plunger |
| 2 | 240-0008 | 2 | White Button Plunger |
| 3 | 240-0009 | 4 | Yellow Button Plunger |
| 4 | 240-0109 | 2 | Orange Button Plunger |
| 5 | 250-0491 | t | Metal Subpanel |
| 6 | 253-0031 | 20 | WICO Switetl Spacer |
| 7 | 253-0233 | 1 | Control Panel Graphic |
| 280-0005 | 1 | Cable Tie | |
| 9 | 280-0327 | 1 | Base Tie Wrap |
| 10 | 280-0329 | 10 | Pal Wex Nut, $-13 |
| 18 | 510-0023 | 16 | WICO Switch Accombly |
| 12 | 800-3168 | t | Control Pane} Harness Assembly |
f Sine. THR ST! ROT T LEFT I
“ REAR VIEW
Control Panel Assembly 800-3167
X-Y MONITOR ASSEMBLY DRAWING NUMBER 800-0249
| ITEM NO. | PART_NO. | QTY REQO. | DESCRIPTION |
| 1 | 211-0059 | 1 | 3-Pin Amp Connector Plug |
| 2 | 200-0025 | 1 | 19! Electrohome X-Y Color Monitor |
X-Y MONITOR Pi2
azv RED 7
ct BLK 2
a2v RED 3
10,00 254] REF
a
“SOEN COUNTER ASSEMBLY DRAWING NUMBER 800-0280
ITEM NO. PART NO. QTY REQD. DESCRIPTION
| 1 | 220-0008 | 1 | Digital Counter, 6 volts |
| 2 | 250-0496 | 1 | Cotn Counter Bracket |
| 3 | 4 | Slot Pin Head Screw, #6 x $'' machine | |
| 4 | 4 | Flat Washer, #6 | |
| 5 | 4 | Lock Split Washer. #6 | |
| 6 | 4 | Hex Nut, #6 - 32 |
VOLUME CONTROL BLOCK ASSEMBLY DRAWING NUMBER 800-0277
DESCRIPTION
| tTEM NO. | PART NO. | QTY REQD. |
| 1 | 211-0005 | 2 |
| 2 | 211-0041 | 6 |
3 4
| 4 | 241-0046 | 1 |
| 5 | 470-0331 | 1 |
| 6 | 212-0005 | 1 |
| 7 | 240-0001 | 1 |
| 8 | 250-0462 | 1 |
| 3 | 280-0005 | 3 |
| 10 | 420-0623 | 1 |
| tt | 475-0007 | 1 |
| 12 | 510-0051 | 2 |
| 13 | 600-0013 | 3.1 feet |
14 0.1 feet Connector Crimp Lock
Connector Pin Amp
Pop Rivet, 1/8" x t/4 Lg
Connector Cap Amp, 6 Pin
Resistor, 330 ohm £ watt 5%
Connector, Female, Black 4 Pin
Volume Control Knob
Volume Control Bracket
Cable Tie
Operator Panel Decal
Pot, 10K, CAR Panel Mount
Pushbutton Slide Switch
1 Condition Shielded Cable
Heat Shrink Tubing, 1/8! Diameter
Volume Control Block Assembly 800-0277
SWATOA AWNIOA | SdIANaS | 13834
Exes] 28.00 Fil) ( oN SERVICE ITEM 13 No “NC & c 8 8.00 Roa] ~
x VIO 9. RESET gd / 9.00 B29) s| (OO Ri : ED 3.00 [229] . Oo NO Ne BLK 9.00 [229] 7 ©, YEL 10.00 [254] CONN VIEWED FROM WIRING END
FLUORESCENT LAMP 2 ASSEMBLY DRAWING NUMBER 800 0147
| ITEM NO. | PART NO. | Qty REQD. | DESCRIPTION |
| 1 | 390-0083 | 1 | Fluorescent Lamp Fixture, 18 |
| 2 | 211-0027 | 1 | Connector King Lug, #10 |
| 3 | 1 | Round or Pin Head Machine Screw, 6-32 xh | |
| 4 | 211-0044 | 1 | Connector Cap Amp, 2 Pin |
| 5 | 211-0041 | 2 | Connector Pin Amp |
A. C. JUNCTION BOX ASSEMBLY DRAWING NUMBER 800-0145
Connector Quick 4 Female
Connector Quick 3/16 Female
SPDT Switch, Cherry
2 Amp Fuse, 250 volt Slow Burn
3 Condition Line Cord
Lock Washer, #6 Int. Star
Lock Washer, #8, tnt. Star
| ITEM NO. | PART NO. | QTY REQD. | DESCRIPTION |
| 1 | 140-0020 | 4 | Junction Box Metal |
| 2 | 211-0017 | 1 | |
| 3 | 211-0038 | 5 | |
| 4 | 270-0001 | 1 | EM| Filter |
| 5 | 280-0007 | 2 | Bushing S/Rel + |
| 6 | 280-0010 | 4 | Wire Nut |
| 7 | 510-0013 | 1 | |
| B8 | 514-0001 | 1 | |
| 9 | 514-0005 | 1 | Fuse Holder |
| 10 | 600-0001 | 1 | |
| 1 | 600-0079 | 2 feet | Zip Cord Line |
| 12 | 2 | Screw, 6-32 x 5/8 | |
| 13 | 2 | Hex Head Nut 6-32 |
14 2
| 15 | 1 | Stud, 8-32 x 1 |
| 16 | 3 | Hex Head Nut 8-32 |
17 Z
18 6.0 Shrink Tubing, 4 Diameter
A.C. Junction Box Assembly @) 800-0145
BD) Nef ba B ‘SMOOTH wine. ee
() ZPL aPL (ai QZ (22
we} pee df ee | i o4 jee ioe : [ _ _ £t ] “me
om we mus JUNCTION. BOX SCHEMATIC
TRANSFORMER EMI ASSEMBLY DRAWING NUMBER 800-0190
| (TEM_NO. | PART NO. | QTY _REQD. | DESCRIPTION |
| 1 | 560-0055 | 1 | G-80 Power Supply Transformer |
| 2 | 212-0016 | 1 | Connector, Female, 10 Pin |
| 3 | 211-0005 | ss) | Connector Crimp |
| 4 | 211-0045 | 1 | Connector Plug Amp, 6 Pin |
| 5 | 211-0042 | 6 | Connector Socket |
| 211-0043 | 2 | Connector Plug Amp, 2 Pin | |
| 7 | 600-0079 | 1 foot | Zip Cord |
| 8 | 280-0005 | 4 | Cable Tie |
| i] | 0.5 feet | Electric Strand Wire, Black, AWG 18 | |
| 10 | 280-0359 | 3 | Electric Crimp Sleeve |
| 1 | 211-0077 | 4 | Connector Terminal Socket, 20-14 AWG |
Transtormer EMi Assembly 800-0190
p89 Beq
DETAIL A
XFMR
G-80 POWER SUPPLY CHASSIS ASSEMBLY
| ITEM NO. | PART NO. | QTY REQD. |
| 1 | 530-0016 | 1 |
| 2 | 250-0460 | 1 |
| 3 | 250-0461 | 1 |
| 4 | 800-0170 | 1 |
| 5 | 253-0206 | 6 |
6 8
| 7 | 482-0104 | 1 |
| 8 | 313-0023 | 1 |
| 9 | 313-0014 | 1 |
| 10 | 313-0015 | 1 |
| 1 | 482-0100 | 1 |
| 12 | 482-0019 | 1 |
| 13 | 420-0557 | 1 |
| 4 | 280-0117 | 1 |
| 15 | 420-0575 | 1 |
16 6
7 6
18 6
19 6
20 6 DRAWING NUMBER 800-0191
DESCRIPTION REF DES.
Heat Sink, G-80 Pwr Sup.
Chassis Support
Cover
PCB Assembly
PCB Support, Threaded
Thread Forming Screw, #6,
Type B, 3/8 tong
Power Transistor TIP 141
Negative 5 Volt Regulator 32075
Positive 12 Volt Regulator 340T12
Negative 12 Volt Regulator 320T12
Power Transistor (Audio Amp) TIP 125
Power Transistor (Audio Amp) TIP 120
Fuse Decal
Tab Rivet, Male i"
Decal--Power Supply B
Pin Head Machine Screw,
#h--40 x $
NyTon Transistor Insulator
Mica Transistor Insulator
Flat Washer, #4
Lock Split Washer, #4
G-80 POWER SUPPLY CHASSIS ASSEMBLY-Continued
ITEM _NO.
2h PART NO.
800-0243
800-0244
800-0245
800-9246
800-0247
800-0248 QTY REQD. DESCRIPTION
Hex Nut, #4, 40
Transistor Harness Assembly,
mM
Transistor Harness Assembly,
P2
Transistor Harness Assembly,
P3
Transistor Harness Assembly,
Ph
Transistor Harness Assembly,
PS
Transistor Harness Assembly,
P6 DRAWING NUMBER 800-0191
REF DES.
G-80 Power Supply Chassis Assembly 00-0191
G-80 POWER SUPPLY PC ASSEMBLY DRAWING NUMBER 800-0170
Electrolytic Capacitor,
Electrolytic Capacitor,
Electrolytic Capacitor,
Electrolytic Capacitor,
Electrolytic Capacitor,
Ceramic Capacitor. 100pf. SOV
Ceramic Capacitor, .005uf,100V
Ceramic Capacitor, .Olut,50V
Ceramic Capacitor,.luf,50V
Ceramic Capacitor.20pf .50V
10-Pin Male Connector RTA
4~-Pin Male Connector RTA
Resistor, 10 ohm,dw 5%
| ITEM NO. | PART NO. | QTY REQD. | DESCRIPTION |
| 1 | 150-0088 | 9 |
1Ouf, 25V
| 2 | 150-0092 | 1 |
1oouf, 25V
| 3 | 150-0095 | 1 |
3300uf, 25V
| 4 | 150-0096 | 3 |
6800uf, 16V
| 5 | 150-0097 | 4 |
' 4700uF, 25V
| 6 | 141-0002 | 1 | |
| 7 | 151-0007 | 1 | |
| 8 | 151-0011 | 4 | |
| 9 | 151-0012 | 3 | |
| 10 | 151-0021 | i | |
| W | 170-0222 | t | PC Board |
| 1Z | 212-0020 | 2 | |
| 13 | 212-0081 | 2 | |
| 14 | 313-0001 | 1 | IC LM723 Dip |
| 15 | 471-0011 | 1 | |
| 16 | 471-0101 | 1 |
Resistor, 100 ohm,3W 5% REF DES. c5,C8,C10,
18,019,023,
C24 ,C26,C31,
C17
C30
€32-€34
C15,€16,C27,
c28
co
c20
€21,622,25
C29
€2,C13,Ct4
c7
ul
R2
R32
G-80 POWER SUPPLY PC ASSEMBLY-Continued
| ITEM NO. | PART NO. | QTY REQD. |
| 7 | 471-0102 | 3 |
| 18 | 471-0103 | 2 |
| 19 | 471-0104 | 1 |
| 20 | 471-0222 | 2 |
| ral | 41-0223 | £ |
| 22 | 471-0332 | } |
| 23 | 471-0182 | 1 |
| 24 | 474-0681 | 1 |
| 25 | 473-05R0 | 1 |
| 26 | 473-OORZ | 2 |
| 27 | 475-0004 | 1 |
| 828 | 481-0002 | 2 |
| 29 | 481-0004 | 10 |
| @ 30 | 481-0006 | 3 |
| 31 | 482-0006 | 2 |
| @ 32 | 482-0014 | 2 |
| @ 33 | 51h4-non | 2 |
| 34 | 514-0003 | 8 |
| B35 | 514-0006 | 1 |
| 36 | 514-0008 | 1 |
| 37 | 800-0191 | 1 |
| 38 | 471-0220 | 1 |
| 39 | 471-0221 | 1 |
DRAWING NUMBER 800-0170
DESCRIPTION
Resistor, 1K ohm, dW 5%
Resistor, 10K ohm, 3W 5%
Resistor, 100K ohm, dW 5%
Resistor, 2.2K ohm, 4W 5%
Kesistor, 22K ohm, 4W 5%
Resistor, 3.3K ohm, 3W 5%
Resistor, 1.8K ohm, 4W 5%
Resistor, 680 ohm, $W 5%
Resistor, .05 ohm, SW 3%
Resistor, .2 ohm, 3W 5%
Pot 1K Car PCMTV
Diode MR751
Diode MRSO1
Diode INSTK/IN414B
Transistor 2N4403
Transistor 2N4401
Fuse 3A Norm
Clip Fuse Mounting
Fuse 1.5A Norm
Fuse 10A Slow Blow
Schematic Reference
Resistor, 22 ohm, 4W 5%
Resistor 220 ohm, 3W 5% REF DES. R10,R27,R29
R6 R30
R23
R21, R22
R5,R9
R28
R26
R7
R25
R14, RIS
R31
DIO,DI2
n6-p9,D11,
D13-D17
D1, D4, DS
Q1,07
Q2,Q3
F1,F2
FA
F3
Rs
R33
G-80 Power Supply PC Assembly
800-0170
OO” ee bot ee
800-0290
# 900-0205
#800-0286
y
‘ 3 g £ &
| c | -~ | PIG | Fa | fe |
| ASST | ; | Buk | 2 | » |
| FLUORESCENT J SAN | B BL BLK | « | x |
LAMP e
| eet? | P13 | g |
ASSY_FAN CARWET 82, 800-0237
| - | ax | Pl |
waveuden—| s.
#800-0255 pia xX-¥ 4asv RED 800-0249 ct BLK asv Rep
s ‘ ' BGROYX 1’ [pass 56)
D orenwe }# 200-0192 ! ' wo VOLUME SERVICE RESET
ASSY VOLUME CONTROL H Bo 277 ]
P/O 800-0279 Ww B00- 0278 ia
# 800-0284
Y_ GAME ELECTRONICS 800 — a
Is [ee REVISIONS ai TiscaoTion AISEE SHT #1 ere 1638:
(WHT/BLK 7) Cory
Twat 800-0163 Tven <7 BLK @\ CONTROL| PANEL BLU__RIGHT 2
ViO FIRE 2
GRY
BLU! #.800-0276
[1 tRED| TTWRT -Kotaovas gs ze
+e x8
kon Pps son-az82 REF P ct Ave a
ALTERNATE [CONFIGURATION FOR ‘TWO CON 700-0062 ])A
COUNTERS
PART OF NOMENCLATURE es On" OCSERIPTON PARTS UST
RED ‘WHT ORT NS GREMLIN / SEGA SAN DIEGO, CALIFORNIA 92/23
PoreIned Bae lercral
BLK Le Top Assembly
“SET CODE DENT NO Deawne wO
700-0082
L
aot na ceD
ey
RST (SHT 7)
SEE SHEET FOR REvisiows 27
D
”
| Dens | ape | pe | PapepSpaPsp Tels | Toa |
4 dhe c vas 4 ie + oo,
| — | 13. | in | g| 18245 | re |
| mare sey dt! | eres | | get ve 0a os os e607 | . | |
| Pt | e (6 4 ff pr ys ps | a | ||
| ®; | T + | 2 | (SHT7) | A |
ra ci & © 2 ne
| Ce | oe | + | eee | 2 |
| Ye &, | + | 2 2200 |
fe) t 2/2 =@ Sz
| 20 | laze ge | J220 220 |
| i a Fe? Fa | ff 30 Fee | | |
vy +5V B
2 fy mer C37-c42 Cad 044,046
IN 374-377
Es PARTS UST OPH Wo.
DO_ WOT SCALE DRAWING
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
| 4 | 3 | 2 | 1 |
REVISIONS, Fore [or] DESoReTR DATE | nemmaveo
| Al RELEASED | CTC | (o26-go\R. ARON | ||
| ECN #528 | CTC | funste [aera | ||
| Pa | ECn *669 | cTe | FEVER | HL |
| CNY G77A | CTC | [eee |
133 @) . PF D
a ®
Pe
a5 @
er
az O
Pr
i?
r
3}, Z DE (SHT 6) —__—He ———3Ja us JO Ls253 ny 8 04 (SHT 6)
£3) der fae B 220 HO ]2 [ty tS = o | fF Tt Al > GHT6) Q 20, Ag Kn g Ss
mae PART OF TOMERGEATORE
| 2g0| | ieekt | wenn no, | Satara |
PARTS UST eiirivns amewinenes” | [ES Gremlin industries, inc. FRACTIONS = DECIMALS ANGLES. Sen Orne, Cation Ores,
| : | eS | RRS | Dae | A |
arena a tans ‘ie CPU Board BEL. woe
| se | [BEE [S00E TERT WO ORANG RO | ney | ||
| Ee | ee | D | 800-0107 | D |
| “APPLICATION | DONO SCALE ORAWING | Sear NONE. | art Tory | |
| 4 | 3 | 2 | 1 |
a} feds fo [oj a
2 3 22! Z|
4g HSC8 do? AaKK. =
| a4 cue | BT 140-147 180-187 | iF? ie |
20 20 20 2c g romney eg Hy te bk
| € | 7 | 7 | 7] f | 7 _7 |
| a7atsea | é G a | - | 6 é | |
| ful | 5 5 | a 3 | 5 | 3 |
| eOHe | a 4 a a | a z |
vaicoe Sfoouu Bs} ouie 3} ous ula 3 uss 3} uta el 2) 276 2) a7 2] ate =] ene 2] 276 2) 2tie w@—LbD 4 ra 23] 23 23 3 23 | 2 Ea z 7 2
- fof paesteliz— fopopdisfehayci~ Papp apahope> of eT EPSP? PLOT
[aloud 17 aholulspabsheh7 —, Jobolul spslispeli7
| z | 1 | 7 |
é I [a] s 5 5 4 4 4 ae>—>rarzt 3) uzr 3 3} ues
| . | 2] e768 | 2] ave |
| ania | 1 | i |
3 23
<2 20 fee OES? 60 267 F027
cae | csczcy cieseser | c2c cua.ciz.ci3, | e9.c Cac cas, Cay cee cz4, cz6c2a, Ott “c
REVISIONS
| Tae | Desemro | DATE [ aPenoveD | ||||
| ~eT | TOF | 7 | z | x | = | |
| te | j | we | ae | “e | SL SEE GRE SPOR Doane | ee |
| on | on | an | on | 20 | ||
| 4 | a | 3 | 24 | igy | ||
| 7 | 7 | 7 | AIS Ais | |||
| a | §| | é | 21 |
Ey
| 4 | 4 | be atc | D |
3 a Le 2 5 mal
¢
AI MS M12 AME
B
J
SOFFE® L
fe]
| oT Se | Paar om | TOMER |
| i | ee | Eyeend |
PARTS UST emerson: are INCHES: in indust: ime. Ce Eee eis ‘San piees, Cabiternts 92023
| = | xs | ARROW, | TATE | A |
| arom | i | rTaprara9| | ||
| wz | Tole | G 80 2716 Eprom Board | ||
| id | SE [OODE WENT WO ORANING FO. | TEV | ||
| a | — | n | 800-0151 | 7 |
| ‘APPLICATION | DO_NOT SCALE_DRAWING | sone OnE | Beer 4 oF 4 | |
| 4 | 3 | 2 | 1 | 59 |
Hey ae 7Kisa wae seo
2uaso3
370K
Tee sT MSH TARUSTUSE
THRUST
u 18] 0 i Le a> a is
al ig LZ
| v | z | oT? |
s pate Le ST 4 S_ENemy sr 741814 a1 510 : meen
2 MEVAGONE sPeecn READY yauaies,
ca a
t 13 fe cree RALL 4 {4 Po cxprasiow
| uso | was | prrcvoran |
ayes 8912 [5 3] r405374) 2 expan n
23 HS Bronce lee 7 £&_ roRPEDO 7 a > ronreos oat Jr
pat atts awe io , oat 9
| van | use| 4cs74 | stp |
| 5K 2 | miter | R33 |
3 ag Been, THE 54 73
of 01 d2 53 O« OS Oo
SRITTER ENEMY SHIP
HEXAGONE Us& +p MEVARONE MSE
ne
-FIRERALL
HENPLABION 1
-EXPLORIIN 3 SHTB
~ BOUNS ~ TORPEDO }
TORPEDO 2
tt
oly! um vea [pone] i] DESCRFTION DATE | APPROVED seve [Tg [keg kévisions see 507 1 728 even [eae
2922 ,4 erie 98K BATE
ics R28 Rigs
7a07 RBD RA eron 34a
200-3177 |B
Tareas GiPeaaeE SEER BivensiohS ane IN INCHES
reams x Bite
pf | ‘APPLICATION. 1DO_NOT SCALE ORAWING [ene sree or Sound Board
suey
20542 B| epaney SHT
R39 a3 0k
10% Ber Fea R45 Rate A wy YOK if eT Be cra crt Ray tpt Tet 2K From Fim
Ezy
est as
EXPLOSION 3 SMT 7 nba aIA coaaa anet03 +H C30 Z22ph “iz TORPEDO | SHT 7 Rez z20K
uz? E+ RORKIENE ENT 7
pe
rine
V2 NETS
Ree 22M
eD4ona
[zone] ure] DESCRETION Dave | AFPROVED. LTE Troe cewsins sex sur) W186 fore [or |
EZ bye BEAD zs
TRORTRCLATURE OR DESERIPOON,
epaona Deora Sound Board
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
WE WELCOME YOUR COMMENTS!
Your comments and suggestions will assist us in improving the usefulness of our publications. Thoy aro an integral part of preparing for revisions of
manuals and parts catalogs.
If you have any technical questions about any SEGA/Gremlin game, are requesting additional publications, or have a suggestion about how we can make our publications more useful to you, drop us a line or use the handy form below.
We value your input.
Comments:
Fill in if you wish a reply: Name. Firm, ODistributor O Operator Address. City, State Zip OOther.
EL
First Fold
NO POSTAGE STAMP NECESSARY 1F MAILED IN THE UNITED STATE
BUSINESS REPLY MAIL
FIRST CLASS PERMIT NO. 10129--San Diego, California
Postage Will Be Paid By:
SEGA/GREMLIN 8401 Aero Drive $an Diego, CA 92123-9990
Attn: Customer Service
a cans Second Fold
Tape This Edge
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.