Jumpshot Field Conversion Kit Instructions UR (M051-00E18-A012)
Jumpshot U.R. (Bally Midway MFG. CO.) · Kit Instructions · 11 pages · 14 sections · original scan
JUMPSHOT LLP.
Field Conversion Kit iastructions
Cally MIDWAY MFG.CO. 10601 W Belmont Avenue | Franklin Park. iilinois 60131 USA. Phone: (312) 451-9200 Cable Address MIDCO~ Telex No.: 72-1596
MO5 1-00E 18-A012
. WARNING THIS GAME MUST BE GROUNDED. FAILURE TO DO SO MAY RESULT IN DESTRUCTION TO ELECTRONIC COMPONENTS.
ELECTRICAL BULLETIN: FOR ALL APPARATUS COVERED BY THE CANADIAN STANDARDS ASSOCIATION (CSA) STANDARD C22.2 NO. 1, WHICH EMPLOYS A SUPPLY CORD TERMINATED WITH A POLARIZED 2-PRONG ATTACHMENT PLUG.
ee BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
ATTENTION: POUR PREVENIR CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR. UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF Si LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.
CBillly|MIDWAY
OUR TOLL FREE NUMBER FOR SERVICE INFORMATION CONCERNING THIS GAME, OR ANY OTHER BALLY/MIDWAY™ GAME YOU NOW HAVE ON LOCATION.
CALL US FOR PROMPT, COURTEOUS ANSWERS TO YOUR PROBLEMS
ANSWERS TO YOUR PROBLEMS.
Video or Pinball - Continental U.S. 800-323-7182 Cally|MIDWAY 10601 West Belmont Avenue Franklin Park, Illinois, 60131 phone (312) 451-9200
© COPYRIGHT MCMLXXXV BY BALLY MIDWAY MFG. CO. ALL RIGHTS RESERVED.
NO PART OF THIS PUBLICATION MAY BE REPRODUCED BY ANY MECHANICAL, PHOTOGRAPHIC, OR ELECTRONIC PROCESS, OR IN THE FORM OF A PHONOGRAPHIC RECORDING, NOR MAY IT BE TRANSMITTED, OR OTHERWISE COPIED FOR PUBLIC OR PRIVATE USE, WITHOUT PERMISSION FROM THE PUBLISHER. THIS MANUAL !S FOR SERVICE USE ONLY, AND NOT FOR GENERAL DISTRIBUTION. FOR PERMISSION REQUESTS, WRITE: BALLY MIDWAY MFG. CO., 10601 W. BELMONT AVE., FRANKLIN PARK, IL 60131.
Printed in U.S.A.
tJ. eee ee > ere een SP Heed see eee
LIST OF MAJOR PARTS INCLUDED IN YOUR PAC-PACK FIELD KIT FOR CONVERTING PAC-MAN / MS. PAC-MAN U.R. TO JUMPSHOT U.R.
DESCRIPTION
| E184-00803-0003 | EPROW: 2532-45 (Position "5E" on Maln Game Logic Board)
| B€18-00004-0000 [secure CPU MODULE W/POTTING (AUXILIARY P.C. BD. f*0595-00107-0000 [MOUNTING BRACKET - AUXILIARY P.C. BD. *0017-00101-0141 18 X 11/16" UN SLOT. HEX HD. (W/WASHER) M.S. (2 Req'd.)
*0017-00042-0231 [PLASTIC MOUNTING - STAND-OFFS - 3/4"=AUXILIARY P.C. BD. (4 Req'd.)
0E18-00903-0000 [DECAL: FRONT
| 0017-00009-0624 [Toot : URN | SHING | M051~00127-K011 | PAC-PACK U.R. CONVERSION KIT INSTRUCTIONS JUMPSHOT U.R. CONVERSION KIT INFORMATION SHEETS
MO51-00E18-A007 |OPTION SWITCH SETTINGS TAG
AE18-00008-0000 |MASTER CONTROL CABLE ASSY.
0017-00042-0622 |CABLE TIE: L = 3-7/8" (8 Req'd.)
- FOR PAC-MAN CONVERSION KITS ONLY
LIST OF MAJOR PARTS (Cont'd.) §NCLUDED IN YOUR PAC-PACK FIELD KIT FOR CONVERTING PAC-MAN / MS. PAC-MAN U.R. TO JUMPSHOT U.R.
DESCRIPTION
*0E 18-00101-0100 |BRACKET: CONTROL SHELF MOUNTING - RIGHT
00101-0200 |BRACKET: CONTROL SHELF MOUNTING - LEFT PART NUMBER
0017-00032-0093 |SWITCH: PUSH RUTTON W/HOLDER (2 Req'd.) x fo} m @ J
0151-00804=0001 |PUSH-BUTTON-WHITE (2 Req'd.)
092 1-00902-0000 |SLIDE PLATE (GROMMET) (2 Req'd.)
0017=00103-0011 |NUT 10-32" LOCKING (8 Req'd.)
A349-00015-0009 |CONTROL ASSY. - 8 POSITION (Includes the following 9 Items)
0017-00101-0298 |5-40 X 5/8" PHIL. RND. HD. M.S.
- FOR PAC-MAN CONVERSION KITS ONLY
JUMPSHOT
GAME OPERATION
Jumpshot is a one or a two player model with a color T.V. monitor, The game has three possible modes of operation; ATTRACT, PLAY, and SELF-TEST.
SELF-TEST MODE
The Self-Test mode is a special mode for checking the game switches and computer functions. it Is the easiest and best way to check for proper operation of the entire game.
You may begin a Self-Test at any time by sliding the Self-Test switch to the "ON" position after the power to the game is on. The test switch Is located inside the coln door under the coin meter.
SELF-TEST DISPLAY AND BOARD LOCATION COORDINATES
MEMORY OK or Rom-1/RBad C Ram-O/Bad W Ram 1/etc.
*1 PLAYER/CREDIT or 2 PLAYERS/CREDIT *SHORT TIME LIMIT
- = switch selectable
- 1f a bad ROM or RAM is found by the game's internal check system during the Sel f- Test, the game Indicates this to you by showing the focation code of the bad chip(s) in place of the "MEMORY OK" message. The following table translates the chip location codes Into actual! positions on the game logic P.C. Board.
DISPLAY DESCRIPTION
MEMORY OK RAMS are good.
| RAD V RAM-O | located on Logic | position | |
| BAD V RAM=1 | located | Logic | position |
| RAD C RAM-0 | located | Logic PC | position |
| BAD C RAM-1 | . located | Logic | position |
| RAR W RAM-0 | located | Logic | position |
| RAD W RAM=1 | located | Logic | position |
MEMORY 0K ROMs are good,
| BAD ROM-0 | located on Logic | position |
| RAD ROM=1 | Jocated on Logic | position |
| RAD ROM=2 | located on Logic | position |
| BAD ROM=3 | located on Logic | position |
- When finished with the Self-Test mode, slide the Self-Test switch back to the "OFF" position. ° A cross hatch pattern appears on the monitor screen for about 2 seconds.
\f you wish to keep this test pattern on the monitor screen for further use, stlde Self-Test switch back to the "ON" position after the cross hatch appears and before It disappears.
° When finished with the cross hatch pattern, set the Self-Test switch to the "OFF" position.
Normal game functions wil! now return to the monitor screen.
ATTRACT MODE
1. The Attract mode starts:
ba Just after power has been turned on to the game.
° After a Self-Test has been completed. (Pertorming a Self-Test sets the credits In the games memory to zero "0".)
After a play has been finished and there are no more credits left in the games memory.
° No matter where the game {s In the Attract mode sequence, It wil! Immediately go to the Play mode display (after a game has been paid for) as soon as either the "1 Player" or the "2 Player" start button ts pressed.
READY-TO-PLAY MODE
1.
2.
3.
PLAY
1.
2. The Ready-To-Play mode starts when enough coins have been accepted for a 1 or a 2 player game,
The Ready-To-Play mode ends when either the "1 PLAYER" or the "2 PLAYER" push button Is pressed.
1# no START button Is pressed, the displays wll! remain on the monitor screen indefinitely.
MODE
After enough colns have been accepted for a 1 or a 2 Player game, the Play mode begins when elther the "\ Player or the "2 Player" start button Is pressed,
The Play mode ends when the game time has elapsed. When this happens, "GAME OVER" Is written across the center of the monitor screen.
In case of a tie score after the game time has elapsed, an overtime period of 24 seconds Is provided to break the tle.
JUMP SHOT
OPTION SWITCH SETTINGS
a
5 MINUTES TOTAL GAME TIME ON 4 MINUTES TOTAL GAME TIME ON 2 MINUTES TOTAL GAME TIME OFF 3 MINUTES TOTAL GAME TIME OFF
PLAYER 1 BLACK WHITE PLAYER 2 BLACK WHITE
FREE PLAY NORMAL PLAY
1 PLAYER PER 1 CREDIT 1 OR 2 PLAYERS PER 1 CREDIT
VIVILLILUTTLTATI LETT ALT TAT TTT TTT) KUORACT MODE SOUNDS S///AS/TSSTLLSISTLTI TILT TILIA LTT
ATTRACT SOUNDS = ON ATTRACT SOUNDS - OFF *OFF OFF
- INDICATES FACTORY RECOMMENDED SETTINGS PART NO. M051-O0E 18-A007
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
9 FOS M-N-L (TOP SIDED OOO SOO ©O®
GRY-BLU
W-O_¢+5VDC>
RED (GND)
PUT THIS WIRE
L-————# PUT THIS WIRE
PUT THIS HIRE
L———_———— PUT THIS WIRE
THIS WIRE GETS SPLICED INTO THE H-O0 HIRE
THAT IS IN PIN 18 OF THE LOGIC PC. THIS HIRE GETS SPLICED INTO THE RED WIRE THAT 1S IN PIN 15 OF THE LOGIC PC PIN 13 OF THE LOGIC PC. PIN P OF THE LOGIC Pc. PIN ¥ OF THE LOGIC Pc. PIN 12 OF THE Logic Pc. novest
v_CaPoRussO
BALLY MIDWAY MFG. CO. ABAPTOR CABLE FOR JUMP-SHOT CONVERSION VERSION A N@51-28E1e-ACes SHEET 2 OF 2 [REV 3B