Capcom vs SNK 2
Capcom Vs. SNK 2: Mark Of The Millennium 2001 (USA) (GDL-0008) (Capcom / SNK, 2001) · Document · 27 pages · 37 sections · original scan
1ST PRINTING SEPT 01
MARKCOP THE MILLENNIUM 2001
Universal Kit
Kit Installation Instructions
& Service Manual
Switchable FROM High Resolution 31K TO Standard (Low) Resolution 15.75K
TO Standard (Low) Resolution 15.75K.
1-2 PLAYER GAME
SEGA ENTERPRISES, INC. USA
MANUAL NO. 999-1318
VISIT OUR WEBSITE!
Service Department phone 415.701.6580 fax 415.701.0604 ih
i
i i nterpases ino... USA = a SERVICE
Ask Dave! Serer
people have visited this page since 3/16/01
Ifyou have any questions or comments about this site please E-Mail to Darl Davidson@seu sega com
THs WER Gite POWERED BY { WebSTAR 4-3
You will need the mE iterns to view this = in its entirety. All Platforms Windows Macintosh
Part #
400-5397-01
838-13616
560-5407-UL
838-13683-93CV1
600-7141-200
600-7009-2500
840-0051D-01
600-7247-500
LOC 3938
. PURCHASE
XKT-0833 Capcom vs SNK 2 Sega Naomi System Kit Contains List
Desc
NAOMI POWER SUPPLY
AUDIO POWER AMP 2 CH
AUDIO XFORMER 120V
JAMMA I/O BD (NAOMI)
USB CABLE
VGA VIDEO CABLE
ASSY CASE PCI DIMM BD
CABLE SCSI TYPE 2 500MM
I/O CTRL BD JVS ENCORD.
SERVICE SWT BRKT ASSY
GD-ROM DRIVE KIT
JOYSTICK, COMP. BLUE
BUTTON, COMP. BLUE
BUTTON, COMP. RED
BUTTON, COMP. GREEN
SWITCH PB LARGE Qty
Part #
999-1330
999-1331
999-1332
999-1333
999-1334
999-1335
999-1336
999-1337
999-1338
999-1339
999-1340 Capcom vs SNK 2 Sega Naomi System Kit Contains List
Desc
MARQUEE ART
INSTR. SHEET (PLAYER)
INSTR. SHEET #2 (CNTRL)
SIDE ART
CTRL PNL OVERLAY
DECAL BTTN (LIGHT)PNCH-RED
DECAL BTTN (MIDDLE)PNCH-GRN
DECAL BTTN (HEAVY)PNCH-BL
DECAL BTTN (LIGHT)KICK-RED
DECAL BTTN (MIDDLE)KICK-GRN
DECAL BTTN (HEAVY)KICK-BL Qty
DESIGNED RELATED PARTS
MARQUEE ART
999-1330
CTRL PNL OVERLAY
999-1334
INSTR. SHEET #2 (CNTRL)
999-1332
SIDE ART
999-1333.
INSTR. SHEET (PLAYER)
999-1331
DECAL BTTN (LIGHT)PNCH-RED[999- 1335]
DECAL BTTN (MIDDLE)PNCH-GRN[999- 1336]
DECAL BTTN (HEAVY)PNCH-BL[999-1337]—__Sy DECAL BTTN (LIGHT)KICK-RED [999-1338] NOT PICTURED DECAL BTTN (MIDDLE)KICK-GRN [999-1 yp
DECAL BTTN (HEAVY)KICK-BL [999-1340]
Feb 9. 2000
SERVICE BULLETIN
SEGA Service Department http://www.seuservice.com 45133 Industrial Drive Phone: 415.701.6580 Fremont, Ca. 94538 Fax: 415.701.6594
SPECIAL NOTICE FOR ALL SEGA NAOMI KITS
PROBLEM:
The SEGA Naomi Game kits are actually ‘JAMMA Dependent’. What this means exactly is they will only install into existing JAMMA Cabinets. If an operator tries to install these kits into a Non-JAMMA cabinet, they will first have to bring the wiring up to JAMMA Standards.
SOLUTION:
Step 1 Disconnect the games original DC Power Supply. You may only use the power supply provided with your kit. Be sure to set the voltages going to your Game BD to 5.1 and 3.3 volts DC to assure proper operation ( Measure on Square Connector at Game BD. Yellow = 5vdc / Brown = 3.3vde / White = Gnd ) Step 2. You MUST USE THE COIN METER SUPPLIED WITH YOUR KIT to assure proper Coin acceptance. A minimum 18 Gauge wire should be used from the Coin Meter | output line on your JAMMA Harness. The Svde ( Yellow ) wire found in the wiring bag of your kit MUST BE USED for the supply voltage to the meter.
Not following the directions provided herein may cause your game to malfunction. All electrical work should be performed by the site’s Serviceman or Technician.
@ In order to prevent an electric shock and short circuit, be sure to turn power off before performing work or touching the interior parts of the product. @ Be careful so as not to damage wirings. Damaged wiring can cause an electric shock or short circuit accident. @ Do not touch places other than those specified. Touching places not specified can cause an electric shock or short circuit accident.
If you have any questions please contact the SEGA Service Department at the numbers given above.
INSTALLATION INSTRUCTIONS
- First. Remove all access panels from the game. Locate the original game Logic PCB’s & Power Supply and remove from the Cabinet by first disconnecting all harnesses from the boards. (You need only to splice in the Main Power (110v AC) into the 3-Pin Connector (GRN/WHT/BLK).)
- Remove all existing game harnesses (we suggest using New Jamma Harnesses (NOT contained in the kit) to ensure reliability).
- Locate the most convenient and open area of the cabinet to mount the Capcom vs. SNK2 Naomi System Assembly. Make sure this area is free and clear of all cable harnesses and grounds, cable clamps, etc.
Vacuum out or clean bottom of cabinet of dirt & miscellaneous parts (e.g. 4 \dea! screws, loose coins / tokens, etc.).
Remove all exterior decals and repair any cabinet damage. Repaint a! ae . Ne . \de cabinet if necessary. Remove the Monitor Plexi or if your game plexi has
Good
Silk-screened artwork, you will need to strip it off.
- Connect the JAMMA Harnesses to the JVS-JAMMA Interface Boards. Separate the wires from each other (i.e. Control Panel, Video, Speaker, Power Supply). Run the various harnesses to the part of the cabinet they go to ensuring they are dressed properly & secured to the cabinet. Locate the Volume/ Speaker/Coin Meter Cable and connect to your existing Switch Bracket or use the new one included with the kit. Note: /fyou are using a VGA Compatible Monitor you can run your VGA Cable directly to the monitor or connect it to your JVS JAMMA Interface for RGB Conversion to your JAMMA Cables.
- Remove Marquee from cabinet and cut to fit the new Capcom vs. SNK 2 Marquee in place good idea)
- First remove all Joystick and Button assemblies from the Control Panel. Remove Lexan and Control Panel Overlay. Proceed to clean surface of the Control Panel by removing all adhesive and dirt. Fill in or plug up existing button holes to set up a blank work area for your new controls.
- Install the new Control Panel Overlay by carefully peeling off the paper backing and laying down on the panel. Smooth it out, starting in the center and working your way to the edges (removing all of the trapped air pockets). If necessary, cut the edges of the overlay excess and fold under panel.
- Cut out the button and Joystick Holes. Install Joystick and buttons from kit into the Control Panel and tighten down. Connect all game harness wires to switches and buttons.
INSTALLATION INSTRUCTIONS
- Proceed to place new decals on the sides of the cabinet. Locate a new monitor bezel, if needed, and replace glass, if required (due scratches). Install Instruction Placard to the back of the Monitor Glass.
Adjust the SIZE, CONTRAST, BRIGHTNESS, and COLORS on the ( Monitor for optimum appearance. Adjust VERTICAL/HORIZONTAL Idea Hold to get a stable picture, if required.
Enter DIAGNOSTICS and adjust the Volume Level, test all Buttons &
food idea! Joystick for proper operation & wiring. Adjust Pricing. Coin-Up and
test out a game to ensure proper play functions are as they should be.
Sega Naomi System Switch Bracket and Speaker Installation Diagrams
(Figure 3)
To CN1 of Amplifier Board Pin 1 > JAMMA Pin 8
Pin 4 ———| Yellow Wire from Extra Harness (+5v) PinS
= +
‘Q} 9) 9 Coin Meter w| x} & a] Z| y
719 Test Service
eJAMMA Pin R Volume -——e JAMMA Pin 1
- JAMMA Pin 15
GRY/RED From CN2 of Left Amplifier Board ORG/RED Speaker
GRY/BLUE
From CN4 of TTT Right
Amplifier Board ORG/BLUE | Speaker
Sega Naomi System JAMMA Harness Wiring
(JAMMA I/O BD)
(Figure 4)
| Ground | 1|A | Ground | |
| Ground | 2/8 | Ground | |
| +5v (Not Used) | 3] | C | +5v (Not Used) |
| +5v (Not Used) | 4/D | +5v (Not Used) |
(Not Used) — SLE (Not Used)
| +12v (Not Used) | 6] | F | +12v (Not Used) |
| Key | 7] | H | Key |
| Coin Meter 1 | 8] | J | Coin Meter 2 |
| (Not Used). | 9/K | (Not Used) | |
| (Not Used). | 10} | L | (Not Used) |
| (Not Used): | 11] | M | (Not Used) |
Video Red —{2I[n] Video Green
| Video Blue | 13 | P | Video Syne | |
| Video Ground | 14] | R | Service |
| Test: | 15/S | (Not Used) | |
| Coin 1 | 16 | T | Coin 2 |
1P Start —— 17 | u -——2P Start
| 1P UP. | 18) | Vv | 2P UP |
| 1P Down | 19 | W | 2P Down | |
| 41P Left: | 20| | X | 2P Left |
| 1P Right | 21) | Y | 2P Right |
Attack 1P (1P SW1) 22/Z Attack 2P (2P SW1) Grapple 1P (1P SW2) ros] a | Grapple 2P (2P SW2) Support 1P (1P Sw3)—_—_| 94 | | Support 2P (2P SW3)
| (Not Used): | bos] | | (Not Used) |
| (Not Used). | 26|d | (Not Used) |
| Ground | la7Te | | Ground |
| Ground | Fos] t | | Ground |
Sega Naomi System Filter Board Information Connector Description etc
Connector Description etc.
Psw2 PSW1 __DIPSW1
@| |e aaa
CN2 CNt CN4 CNS} Service Test p]o|o Iplo}o}o Switch Switch 7 @| P="! fefefe] felefa[a
Preamp Level VGA Level Power Connectors Audio Out Video Out
an ots ” “ ~s ~ oe S 7 N a ». 7 N 4 x / 1 2 3 4 \ / \ ui A , \
| ‘ | Setting for High | \ |
| Fi | Resolution 31KHZ | \ |
| 1-4 off \ ! \ if i}
\ i ‘ 1 2 3 1 I
| \ | Setting for Standard | I |
| \ | Resolution 15KHZ | / |
| \ | 1 on 2-4 off. | / |
\ / ‘\ / \ / IS, 7 \ a % Z Sy . Uo Tig 7 uc c
PART NO. DESCRIPTION DC | e10-0624-0003] Go sort KIT CAPCOM vS.SNK 2 lo) jaos—0003 NAONT GOROM CAPCOM VS.SNK 2
Handling the GD-ROM Disk e
e Do not contaminate the disks with your fingerprints or dust particles. Contaminated disks may lower audio and video quality. When cleaning the disks, do not use volatile chemicals (benzine, thinner, etc.), cleaning sprays, and antistatic agents. Do not use cracked, warped, or damaged disks. Do not attach papers or seals onto the disks; do notscratch the disks. Do not use the disks with a sign of peeled seals, tapes, etc. Observing these instructions, do not insert such a non-usable disk into the GD-ROM drive. Otherwise the inserted disk can not be ejected. When cleaning a heavily contaminated disk, use clean cloth that has been soaked in water and squeezed. Then remove moisture with drycloth. When holding a disk, be careful not to contaminate it with your fingerprints.
How to Hold a Disk
With one hand: Insert your forefinger into acentral hole and at the same time put your thumb and middle finger on the disk's 2 edges. With both hands: Put your thumbs and forefingers of both hands on the disk's edge.
NAOMI
CAPCOM CO., LTD. 2001 ALL RIGHTS RESERVED. ©SNK 2001
MANUAL
WARNING
U.S.A. version of this game is for the North American countries only. Europe version of this game is for the European countrie only. Sales, export, or operation outside these countries may construed as copyright and trademark infringement and is strictly prohibited. Violators are subject to severe penalties and will be pr
4421-11465
CA ON
For your safety, please read and abide by the following instructions when handling the P.C. board
instructions when handling the P.C. board. @ Make sure the power is off before installing the board or changing the settings of the board. @ Do not damage the wiring cables. ® Do not disassemble the case. ®@ Do not touch the board, connectors or the harness with wet hands.
Please keep the following instructions to keep the P.C. board in good condition. ® Do not block the ventilation slots. @ Do not keep the board in extremely cold/hot places. ® Do not drop or bump the board. ® Do not spill any liquids on the case. ® Do not disassemble the case. @ Always keep the connectors clean. ® Do not disconnect the connectors, cables, or the harness while the power is on.
ICARCOMY
Disassembling the case or removing the sticker may cause the termination of your repair warranty.
No desarme la caja. Si la caja est: desarmada o hay evidencia de que lo ha estado, se deneger'n las reparaciones. Ne pas dEmonter la boOte. Au cas o” il apparaOt que cette boOte a Et dEmontEe, votre demande de rEparation sera refuse.
Das Geh%ouse nicht “ffnen. Falls das Geh%ouse ge*ffnet wurde oder falls ersichtlich ist, dafl es ge*ffnet wurde, wird die Reparatur verweigert.
Non smontare la scatola involucro. In caso sia stata smontata, o sia evidente che ciU E avvenuto, la riparazione sar{ rifiutata
BEAU RNRERZRS/ AR BAM RIMBR ES, MADAME.
HOA] BHS Baystal ofA] Q. Bot AloIAS Bafsprr+ Bast ABO HAS Fel SIAR CH.
CONTROL PANEL LAYO
Jump Lever Buttons
of the screen. (Gisate Pune) Tight Punch Middle Punch
- Please use the illustrated setting for the best possible game play. Moves the player to the mer 4 jump/crouch, left/right (ea)
Left € Right F323
Som im Crouch TiahiKick) Wide Kit
CRT MONITOR Either 15k or 31k horizontal monitor can be used. DIPSW DIPSW, Locate the DIP switch 1 on the connector side of NAOMI board. Turn it ON for 15k monitor. Turn it OFF for 31k monitor. (Default is set to ON)
- Please refer to page 17 "CAPCOM VS. SNK 2 SETTING TIPS" for 31k monitors. 15k monitor 31k monitor
JAMMA CONNECTOR
@JAMMA CONNECTOR
SOLDER SIDE COMPONENT SIDE 1/0 BOARD CN3 GND | A| 1 | GND
| 1 | +5v | GND | B | 2 | GND | |
| 2 | +5v | +5v]C]3 | +5V | |
| 3 | NC. | 45V | D] | 4 | +5V |
| 4 | SHOT 6 (1PW SW6) | NC. | E | 5 | NC. |
HOV 2
| 5 | | | (PSW7) NOT USED | av | i | ; | ey. |
| 6 | (1P SW8) NOT USED | - | — | |||
| 7 | Ne | N.C. | J | 8 | COINCOUNTERT |
~ (COINLOCK OUT2) | K | 9 | (COINLOCK OUT 1)
| 8 | SHOT 6 (2PW SW6) | sp) | L | 10 | spo |
| 9 | (2P SW7) NOT USED | nc. | |Mliulne. |
| 10 | (2P SW8) NOT USED | VIDEO GREEN | N | 12 | VIDEO RED | |
| 11 | NC. | VIDEO SYNC | P | 13| | VIDEO BLUE |
| 12 | NC. | SERVICE SW | R | 14] | VIDEO GND |
| 13 | GND | N.C. | S | |15| | TEST SW |
| 14| | GND | COIN SW2 | T ] 16] | COINSW1 |
START SW2 | U | 17| STARTSW1 2P UP | V | 18| IP UP 2P DOWN | W | 19] 1P DOWN OUT IN 2P LEFT | X | 20] 1P LEFT
| 2P RIGHT | Y | |21| | 1P RIGHT | ||||
| JPl---->y | @| | @ | @ | 2P SHOT 1 | Z | |22| | IP SHOT 1 |
GP Light Punch) AP Light Punch 2P SHOT 2 | a | 23| IP SHOT 2 (BMiadie Pinch ap side Punch) 2P SHOT 3 | b | 24] 1P SHOT 3
- (2P Heavy Punch) (1P Heavy Punch) 2P SHOT 4 25 | IP SHOT 4
| * Must be set for proper | ‘GP Light Kick)| | © | CP Light Kick) |
| ati | BPSHOTS,| | 4 | |25|\PSHOTS |
| operation | GND | ¢ | |27|GND | |
| GND | f | |28] | GND |
@PARTS NAME CR7E-S6DA-3.96E : (HIROSE) OR 1168-056-009: (KEL)
| WV | ENTER | THE | TEST MODE |
Press the Test Button inside the cabinet and the "NAOMI SYSTEM MENU" will appear on the screen.
Pres fest modes. (For the details on "NAOMI SYSTEM MENU", please refer to "NAOMI SERVICE MANUAL".) the Service Button to move the "g " cursor and press the Test Button to enter various
To enter the GAME TEST MODE, move the "g " cursor to GAME TEST MODE in the NAOMI SYSTEM MENU and press the Test Button.
GAME TEST MODE
INPUT TEST SYSTEM MENU
JAPAN VERSION GAME DATA
¢._RAM GAME CONFIGURATION TEST SOUND TEST PASSWORD CRT TEST S¥SteMAssionuENts COIN ASSIGNMENTS EXIT BOOKKEEPING BACKUPDATA CLEAR ESGRSETTING DIMM BOARD TEST GAME TEST MODE [CAPCOM VS. SNK 2 EXPORT] EXIT SELECT WITH SERVICE BUTTON AND. PRESS TEST BUTTON SELECT OPTION = 1P UP or DOWN START =1P SHOT MENU
MODE
-(@ CAUTIONS ON NAOMI SYSTEM MENU _}
- Please set the CABINET TYPE and the MONITOR TYPE of the SYSTEM ASSIGNMENTS menu to "2 PLAYER(S)" and "HORIZONTAL" respectively. This game will not function properly if above is not followed.
- The following is the default settings of COIN ASSIGNMENTS COIN CHUTE TYPE COMMON COIN/CREDIT SETTING #1 COIN CHUTE #1 1. COIN 1 CREDIT COIN CHUTE #2 1. COIN 1 CREDIT
- Please refer to the following for the SEQUENCE SETTING of the COIN ASSIGNMENTS SEQUENCE 1: Credits required to start the game. SEQUENCE 2: Credits required to continue the game.
- SEQUENCE 3-8 is not available in CAPCOM VS. SNK 2.
Ex) Standard setting One(1) credit to start and continue the game.
| SEQUENCE 1 | 1 CREDIT(S) | Credits required to start the game |
SEQUENCE 2_1 CREDIT(S) Credits required to continue the game.
Ex) 2 credits start, | credit continue setting Players need 2 credits to start the game but only one credit to continue the game,
| SEQUENCE | | 2 CREDIT(S) | Credits required to start the game. |
| SEQUENCE 2 | _1 CREDIT(S) | Credits required to continue the game. |
- BOOKKEEPING 2/2 indicates the following P1(P2) SEQ 1: The number of times the game was started from Player 1 and Player 2 each. P1(P2) SEQ 2: The number of times the game was continued from Player 1 and Player 2 each.
- SEQ 3-8 is not available in CAPCOM VS. SNK 2
Ex) The number of "Start" of IP side, The number of "Start" of 2P side Pl SEQ 1 82 P2 SEQ 1 45 P1 SEQ 2 36 P2 SEQ 2 15 ‘The number of "Continue" of IP side” The number of "Continue" of 2P side
GAME TEST MODE
On this screen, you can test "input signal" of the lever/buttons and can also set the game's difficulty. Your setting will be saved in the backup RAM.
@CONTROLS IN GAME TEST MODE
- Use the lever and the buttons Decide an item Select an item as illustrated.
- Not used
- Not used
Change setting GF => Change setting
> * Not used. Select an item Notused
GAME TEST MODE
g INPUT TEST GAME DATA GAME CONFIGURATION PASSWORD
EXIT
SELECT OPTION = 1P UP or DOWN START = 1P SHOTI
MODE
+ INPUT TEST Tests the "input signal” of the lever and the buttons. When the "input signal” is detected, the number changes from
- Inside INPUT TEST, you can test up to two Service Buttons. In case your cabinet has only one Service Button, please make sure if the IP Service Button functions properly. (Please note however, on certain cabinets, it is possible the number changes to "1" on both IP and 2P side.)
+ GAME DATA Shows the earning-related data. Please use the info to determine the best coin settings for your arcade.
- GAME CONFIGURATION Sets the game play settings such as difficulty, number of rounds, timer, etc.
+ PASSWORD Enter the password to unlock the hidden features in the game.
+ EXIT Returns to NAOMI SYSTEM MENU
GAME CONFIGURATION
g SOUND MODE EO
| GAME TEST MODE | DEMO SOUND HALF | OF |
| INPUT TEST | CONTINUE | ON |
GAME DATA, 9g GAME CONFIGURATION DIFFICULTY, EASY /2*"HARD
| PASSWORD | DAMAGE LEVEL | LOW [*2"HIGH |
| ar | TIMER SPEED | SLOW /#2""HIGH |
GAME SPEED SLOW|*3***HIGH EVENT OFF JOIN-IN ON DEFAULT SAVE & EXIT
SELECT OPTION = IP UP or DOWN START = IP sHOT!
GAME TEST MODE DECIDE WITH
SHOT 1 SELECT OPTION = 1P UP or DOWN MODIFY SETTING = 1P LEFT or RIGHT. = 1P SHOTI or SHOT2
(GAME CONFIGURATION _)
SOUND MODE Please set this item to "STEREO" for normal operations. Setting to "MONAURAL" will make your sound output monaural. DEMO SOUND HALF ON: Plays the attract mode demo sound at half volume. OFF: Plays the attract mode demo sound at regular volume. CONTINUE Set this "ON" to enable the "CONTINUE" feature. Set this "OFF" to disable the "CONTINUE" feature.
DIFFICULTY Sets the game's difficulty level. There are 8 levels in total. As the number increases, the game gets more difficult. DAMAGE LEVEL Sets the attacking power. There are 4 levels in total. As the number increases, the attacking power increases, (Thus the average play time gets shorter.) TIMER SPEED Sets the timer speed. There are 4 levels in total. As the number increases, the time elapses quicker. GAME SPEED Sets the game speed. 5 levels are available. As the number gets higher, the game speed increases. EVENT Use this function for events/tournaments. If set to "ON", only | credit is required for 2 players "VS." game. However, the game will be over for both players regardless of the game result. Please set this to "OFF" for standard operations. JOIN-IN Used to turn on and off the JOIN-IN feature, Please set to ON for standard operations. If you wish the game setting to be played by 1 player only(advisable for beginners), set to OFF. DEFAULT Resets all the settings to the factory defaults. (Initialise) Not only the GAME CONFIGURATION but also the settings in NAOMI SYSTEM MENU(COIN ASSIGNMENTS, etc.) will be reset to the following factory defaults. ADVERTISE SOUND : ON MONITOR TYPE : HORIZONTAL COIN CHUTE TYPE : COMMON COIN/CREDIT SETTING _ : #1 (1 coin 1 credit: Asia version) #12 (2 coins 1 credit: European version) SEQUENCE SETTING : SEQI=I (1 credit to start) SEQ2=I (1 credit to continue)
For more details regarding the NAOMI SYSTEM MENU, please refer to the "NAOMI SERVICE MANUAL." SAVE & EXIT Saves your GAME CONFIGURATION and COIN/SYSTEM ASSIGNMENTS and returns to the GAME TEST MODE. (it takes approximately 2 seconds to save the settings. Please do not turn off the power while saving.)
@GAME CONFIGURATION OPTIONS
SOUND MODE STEREO MONAURAL
| DEMO SOUND HALF | ON | OFF | |||
| CONTINUE | ON | OFF | |||
| DIFFICULTY | 1 EASY | 2 | 3 | 4 | |
| 5 | 6 | 7 | 8 HARD | ||
| DAMAGE LEVEL | 1 LOW | 2 | 3 | 4 HIGH | |
| TIMER SPEED | 1 SLOW | 2 | 3 | 4 HIGH | |
| GAME SPEED | 1 SLOW | 2 | 3 | 4 | 5 HIGH |
| EVENT | ON | OFF | |||
| JOINGIN | oN | OFF | * | Factory settings |
- DEMO SOUND HALF setting is available only when ADVERTISE SOUND is set to ON. ADVERTISE SOUND setting can be found under the SYSTEM ASSIGNMENTS menu of the NAOMI SYSTEM MENU.
| GLC | VS. | SUK | 2 | SaGAHIS | wins |
@LARGE CABINET Because of its simple controls, CAPCOM VS. SNK 2 can be played by any game player. Its unique characters and beautiful graphics that can only be achieved on the NAOMI board will surely appeal even to the people who had never played video games before. Turn this For this universal appeal of the game, we strongly recommend you to install this [ eile game in a large cabinet and place it at the front of your arcade. For 31K MONITOR CABINET 15K MONITOR
The NAOMI board is capable of handling the screen resolution that is three times as high as the CP-SYSTEM board. To exercise its maximum performance, it is indispensable to install the board in the cabinet equipped with 31K monitor that is capable of high resolution graphics. (Ex. "BLAST CITY" "MEGALO 410" etc. from Sega) For
| To enjoy NAOMI's graphics at its best, | please use the cabinet with | 31K monitor, | 31K MONITOR |
(When using 31K monitor, please set the DIP switch on the NAOMI board's connector side as described in the right chart.) (Default Setting)
According to your DIMM BD type, attach the correct sticker as follows.
442-00084B-01 (STICKER 840-0084B-01) Attached place
PART NO. DESCRIPTION
| ® | 840-0001F | ASSY CASE NAO DIMM BD COM |
(Q) KEY CHIP
| Oo@ | 840-0084B-01 | DIMM BD NAO CPvsSNK2 |
Attached place
PART NO. DESCRIPTION
840-0004F ASSY CASE NAO DIMM BD COM RTOS
@ KEY CHIP
| @:@ | 840-0084B-02 | RT DIMM BD NAO CPvsSNK2 |
SOFT KIT
S Handling the GD-ROM Disc
@ Do not contaminate the discs with your
IMPORTANT fingerprints or dust particles. Contaminated
discs may lower audio and video quality. When cleaning the discs, do not use volatile chemicals (benzine, thinner, etc.), cleaning sprays, and antistatic agents. Do not use cracked, warped, or damaged discs. Use clean cloth to wipe Do not attach papers or seals onto the discs; do the disc gently and into a not scratch the discs. radial direction. Do not use the discs with a sign of peeled seals, tapes, etc. Observing these instructions, do not insert such a non-usable disc into the GD-ROM drive. Otherwise the inserted disc can not be ejected. When cleaning a heavily contaminated disc, use clean cloth that has been soaked in water and squeezed. Then remove moisture with dry cloth. When holding a disc, be careful not to contaminate it with your fingerprints.
How to Hold a Disc
With both hands: With one hand: Put your thumbs and forefingers of both Insert your forefinger into a central hands on the disc's 4 circumference tips. hole and at the same time put your thumb and middle finger on the disc's 2 circumference tips.
How to Handle the Key Chip @ = The key chip is a precision device. Handle it carefully because it may be damaged by heat, shock, and static electricity. @ Use the key chip with the GD-ROM disc of the corresponding game that has been shipped together with the key chip.
When you order the GD-ROM disc only, please mention the Part No. 610-0625-##«.«.
PART NO. DESCRIPTION
| ©+@:+@+®@ | 610-0630-0008 | GD SOFT KIT CPvsSNK2 ENG. |
- NAOMI GDROM CPvsSNK2
- KEY CHIP
| © | 420-6620-01 | SERVICE MANUAL CPvsSNK2 ENG |
| (2) | 253-5507 | DISC CASE WITH IC HOLDER |
| @O+@ | 610-0625-0015 | GD SOFT CPvsSNK2 |
GAME BOARD
@ Do not expose the Game Board so as to avoid causing an accident or malfunctioning.
PART NO. DESCRIPTION
ASSY CASE (@+@) 840-0084D-01 ASSY CASE NAO CPvsSNK2 USA 840-0084D-02 ASSY CASE NAO CPvsSNK2 EXP.
| 840-0084D-03 | ASSY CASE NAO CPvsSNK2 KOR, | :KOREA |
| 840-0084D-04 | ASSY CASE NAO CPvsSNK2 AUS | :AUSTRALIA |
ASSY CASE NAOMI 840-0001A-01 ASSY CASE NAOMI MAIN BD USA — :USA
| MAIN BOARD | 840-0001 A-02 | ASSY CASE NAOMI MAIN BD EXP | :OTHERS |
| 840-0001A-03 | ASSY CASE NAOMI MAIN BD KOR | :KOREA |
840-0001A-04 ASSY CASE NAOMI MAIN BD AUS | :AUSTRALIA
(9) ROM CASE 840-0084C ROM CASE NAO CPysSNK2
a UWLODAIIAAISNISMMM 120 Vac Input »
80,
SO “TRANSFORMER ov
120v mw ov
60-5407
[Extra] [Gp Rom DRIVE]
PU 0" as i
Zz Z 838-13616
AUDIO POWER AMP 2CH
| @ | SINS | ig ¢ | aS ale | 1 |
| a2 | > | 3 | ||
| 385 883 | 23 38 | i |
400-5397 COIN COUNTER to Extra é Yellow Wi D ‘SW REGU FOR JVS ‘ellow Wire 2 ; ‘ & é N
‘ MPU : OUTPUT 3 ° t r
To PIN 8 au oo of Jamma 13
CONTROL PANEL
None D puer E LIghT GREEN
AWG18-U 20 U 22 UL JAMMA CONNECTIONS USED ARE:
- VIDEO OUT
- SWITCH INPUTS
- SWITCH GROUND RETURNS
- COIN COUNTER OUTPUT
SEREAL, u00) ENDNO SLANT ASA OL Nb OL LIS I LSAW
NI
600-6743-050
out
MINI D-SURISP 600-7141-050
SEREAL, (cna
NAOMI KIT UNIVERSAL
WIRING DIAGRAM (1/1) Fr T
Warranty
Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.
Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor.
Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.
Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.
This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above.
SEGA ENTERPRISES, INC. (USA)
45133 Industrial Drive Fremont, CA 94538 (415) 701-6580 phone (415) 701-6594 fax