CATHODE RAY TOMES

Cloak & Dagger ST-242 1st Printing Backdoor Sheet

Cloak & Dagger (rev 5) (Atari, 1983) · Backdoor Sheet · 1 pages · original scan

Page 1

‘ST-242 1st printing

Important Note to Operators If the operation, maintenance and service manual was not included in this game when you unpacked it, contact your distributor to get a free copy. (All Atari manuals for coin-operated games also include complete illustrated parts lists.)

To enter the self-test mode, turn on the self-test switch. The self-test switch is located on the utility panel of ATARI-built games. On converted games not originally manufactured by ATARI, the self-test switch is the locking spring-loaded pushbutton switch located on the game coin door. This switch is labeled AUTO-UP, MANUAL DOWN. To exit the self-test mode, press the switch down into its locked position.

Self-Test Screen Definitions

Screen Message Definition

MASTER RAM Checks specific addresses in the master microprocessor main memory. MASTER ROM Computes the checksums for all of the master program EPROM integrated circuits. MOTION RAM Checks specific addresses in the master microprocessor main memory. EAROM PARITY Checks parity of the two option areas that store game options. MASTER INT Checks the master microprocessor for interrupts and VBLANK activity. SLAVE COM Checks operations and interface circuitry of the slave microprocessor. SLAVE RAM Checks specific addresses in the slave microprocessor memory. SLAVE ROM Computes the checksums for all of the slave program EPROM integrated circuits. SLAVE INT Checks that the slave microprocessor is receiving interrupts. BITMAP RAM Tests the slave microprocessor RAM buffers. SHARED RAM Checks the clock-stretching and Ppriority-access circuitry used by the communications RAM. (The following messages refer to the looping tests for switches.) OPT SWTCHS Checks the option switch at position 5A on the Master PCB. PLA SWTCHS Checks the 1-player and 2-player Start switches. DIR SWTCHS Checks bits for VBLANK and IGNIT- ER, coin, and self-test switches. JOYSTICKS Checks the movement of both joysticks. SOUND NUM Displays the index of the sound or music currently playing. *A trademark of and licensed by Universal City Studios, Inc.

2-Player Start Press to start or stop game The option switch is sounds. An * appears next located at 5A on Master to the sound number to Not Used PCB. indicate that the volume has been turned off.

1-Player Start Press to start or stop the motion-object parade, or to Not Used

Can be either 1 or 0

repeat the playing of a current sound

Not Used GG Right Coin Switch

Self-Test Switch

Not Used Bi Should always be 0

<< (active low) VBLANK 'Nperer) ———§ 1-<——_———_- Flickering between states (1 & 0) is normal

Auxiliary Coin Switch Left Coin Switch

Joystick Direction

Looping Test Toggle Switches

Press IGNITER button to start or stop test. See detail above.

Sound Identifier

Figure 2-1 Microprocessor and Looping Tests Display

Switch Settings for Coin and Credit Options

Settings of 8-Toggle Switch on CLOAK AND DAGGER Master PCB (at 5A)

234567

8 Option

On Off

Off Off

Off On

Off.OffOff
OffOffOn
OffOnOff
OffOnOn

Not used.

Off On

Off On Demo Freeze Mode On Demo Freeze Mode Off<4

Right Coin Mechanism 1 Credit Added for 1 Coin 2 Credits Added for 1 Coin

Left Coin Mechanism 1 Credit Added for 1 Coin<4 4 Credits Added for 1 Coin 5 Credits Added for 1 Coin 6 Credits Added for 1 Coin AN ATARI © Aviarner Communications Company Off Free Play Off 1 Credit Required for 1 Game (or 1 Player) On 1 Credit Required for 2 Games (or 2 Players) On 2 Credits Required for 1 Game (or 1 Player)

Manufacturer's recommended settings