CATHODE RAY TOMES

Black Widow ST-243-01 1st Pritning Backdoor Sheet

Black Widow (Atari, 1982) · Backdoor Sheet · 1 pages · original scan

Page 1
Important Note to Operators: {f the operation, maintenance, and service manual was not included in this game when you unpacked it, contact your distributor to get a free copy. (All Atari manuals for coin-operated games also include ST-23401 1st printing

Operator Informa-

Operator Informa tion Display

complete illustrated parts lists.)

Switch at D4 Switch at B4

7;ei{Coin modes)(Game piay)
Set the self-test switch to the on position.‘SwitchSwitchSwiteh‘Switch
All credits are cancelled when the self-test switch isToggle 8Toggle 1Toggle 8Toggle 1

turned on. If the message EAROM BUSY PLEASE WAIT appears, wait for it to disappear before proceeding.

NOTE The BONUS ADDER number (0 through 7) displayed indicates the price option selected by the option switch at location D4.

HOLD FIRE THEN PRESS START | FOR TEST LIVES PER GAME 3 MAX START WAVE 2! Right Coin

GAMES PLAYED'Mechanism
OVERAGE GAME TIME124Left Coin.

Mechanism LEFT MECH x! RIGHT MECH x! BONUS ADDER O mMEOIUM oootol SS ‘Start Switch BONUS SPIDER EVERY 20000 Move Left Move Down, (2 played

1COIN | PLAYFire LeftFire DownFire Uptart Switch

(1 playen)

Operator Information Display

To Erase Scores and Times:

  • Obtain an operator information display.
  • Press the 1-player start button until the screen displays the appropriate instruction, i.e., HOLD FIRE THEN PRESS START 1 TO (CLEAR SCORES) (CLEAR TIMES) (CLEAR TIMES AND Screen 1—Test Passes

EAROM or CUSTOM I/O CHIP fallure is indicated by one letter in the top center of the screen.

EAROM and Custom 1/0

SCORES). Chip Locations

3.Hold FIRE joystick forward, then press the‘Screen DisplayChip Location on Game PCB

1-player start button. The words EAROM BUSY noanigiia PLEASE WAIT will appear on the screen until the EAROM at M2 entire table is erased. Wait until the display disappears before proceeding.

  • Set the self-test switch to the off position to erase the operator information display.

Self- Test Display

The following information includes instructions for obtaining various self-test displays. These displays are provided to quickly check the game’s operation and locate malfunctions in the game controls and circuitry. If there is a failure, the game produces audiovisual indications to help you find the problem.

NOTE This procedure does not test the coin door lockout coils and coin counter. If the lockout coils do not energize when the game is on, suspect the lockout coil wiring, coin door harness, game PCB har- Custom I/O chip at C/D3 Custom I/O chip at BS 2OMm

SWITCH fallure is indicated by the associated 0 not changing to a 1 on the screen and no sound being produced when the switch is activated. SOUND failure is indicated by no sound. Check the volume control on the utility panel, or troubleshoot using the game schematics.

SCREEN 7 Screen 7 display comprises a diagnostic program controlied by switches 2, 3, and 4 of the 4-toggle option switch at location P10/11 on the game PCB. This group of switches lets you choose one of six tests. These tests provide recurring sequences to make it easy for you to troubleshoot the vector-generator circuitry. Screen 1—Test Falls

To see self-test screens 2 through 6, press the auxiliary coin switch on the utility pane! once to advance to the next screen.

To display this screen, hold the auxiliary coin switch down, then press the 2-player start button. To exit from this screen, set the self-test switch to off. During this test, the screen will either be blank or display vectors, depending on the settings of the switches at location P10/11 on the game PCB.

Vector-Generator Diagnostic Tests

Settings of 4-Position DIP ness, latch R9, or driver Q2 of the game Switch at P10/11

PCB. Troubleshoot using the game sche-TestAction432

matics.

Test 1Tests WDDIS every 4 msec (blank screen)OffOffOff
SCREEN 1Test 2Tests vector-generator halt instruction every .55OnOffOff
The screen 1 displayindicates the condition of themsec (blank screen);
ROM, RAM, and three other integrated circuits.Test 3Tests vector-generator long vector (and halt in-OffOnOff

struction) every 8.2 msec

RAM failure is indicated by a sound and, if possible,Test 4Tests vector-generator jump instruction (and longOnOnOff

an R displayed in the top center of the screen. vector and halt instruction) every 8.2 msec

Test 5 Tests vector-generator short vector instruction Off Off = On

RAM Locations (and all of Test 4) every 8.6 msec

Test 6Tests vector-generator JSRL/RTSL instructionOnOffOn
Number of TonesRAM Location on Game PCB(and all of Test 5) every 10.2 msec
Test 2Blank screenOffOnOn
30awreTest 2Blank screenOnOnOn

ROM fallure is indicated by one or more vertically arranged numbers displayed on the top half of the screen. ROM Locations

‘Screen Display ROM Location on Game PCB

or \7 a MINT 2" NIP7 3 R7 4 01 TEST3 TEST 4 5 EIFY 6 HI 7 J 8 KILY gre M1

if this ROM is bad, you will hear a constant low tone and the program may be unable to display a screen image. “if this ROM Is bad, the screen may be blank.

® ATARI vee = QQ A vere communications Company Screen 7—Diagnostic Program Displays