Space Invaders Part 2 Color
Space Invaders Part II (Taito, bigger ROMs) (Taito, 1979) · Manual · 25 pages · 7 sections · original scan
es 6 BARAABARRARABARARABRRARARABABRRARARERRRARBRRRBRABEBEBESEBERBEBEBEREE KET EREREZEEEREEARESLELERESESESESSEESZSESEE EERE UE Y
“cn SPACE
NNADE?S’
Q
PARTS CATALOG
U ®
TAITO AMERICA CORPORATION 1256 Estes Avenue. Elk Grove Village, IL 60007 #960021 SPRRABARABSRAERRARRAREREARERREREERERRERERERERREEE EEE PRBAVAARSARRABARABABABAAREAERARRRARERAEEAEBERRERAREREREERSEEBEETEBEEEE
women oauwnmnrlwn Fe
Ke Oo INDEX
DESCRIPTION:
INDEX
CABINET ASSEMBLY DRAWING
CABINET ASSEMBLY PARTS LIST
CONTROL PANEL ASSEMBLY DRAWING
CONTROL PANEL ASSEMBLY PARTS LIST
VIDEO AND CABINET ASSEMBLY DRAWING
VIDEO AND CABINET ASSEMBLY PARTS LIST
PRINTED BOARD AND REGULATOR ASSEMBLY DRAWING
PRINTED BOARD AND REGULATOR ASSEMBLY PARTS LIST
PRINTED BOARD AND REGULATOR ASSEMBLY PARTS LIST CONTINUED,
y
CABINET ASS
= im =
10.
li.
12,
13,
14,
15, CON DMN FWDNY CABINET ASSEMBLY
PART NO: REF. NO: DESCRIPTION: 998573
998580
999000
998584
998662
998663
9938666
999054
999055
999052
998664
998665
999047
998655
998653
998579 Cvoo0003
AAO19549
CV010002
AAQ19545
AA019593
AA013605
AA013603
PV070003
PV070004
AA029521
TvO60001
AA016553
CV010006
CV0390024
AAO16556
cv090021 TABLE TOP GLASS
VIDEO MASK
TOP BOARD
GLASS BUMPER
CORNER BRACKET
LOCK BRACKET
HOOK
INSTRUCTION CARD (A)
INSTRUCTION CARD (B)
COIN STICKER
HINGE ASSEMBLY
HINGE ASSEMBLY
TABLE BOX
BOTTOM BOX
TABLE LEG
COLOR PLATE
CONTROL PANEL ASS’
AK ~~ < gel,
CONTROL PANEL ASSEMBLY
ITEM! PART NO: REF, NO: DESCRIPTION: 1 998281 AAQ52511 push BuTTON switcH VAQ-4R(omRoNV-1C2) 2, 998690 = TEO30C(08 = swWITCH PLATE 3, 998588 AAO19535 = PUSH BUTTON 4, 998678 WT020001 sHaFT
- 998677 WTO30004 BASE BRACKET
- 998676 WTO30005 MS MOUNTING BRACKET
- 998520 AAOQ19504 = INSULATOR TYPE-V 8, 998282 AAQ52532 micro SWITCH AH71555(omRoNV-10FL22)
9, 998681 TWO30015 coNnTROL BOARD BRACKET (B)
- 999698 WT030007 WASHER
ll. 998740 WTO50001 PLATE SPRING
- 998682 WPO30002 PUSH SWITCH BRACKET
- 998520 AAQ19504 INSULATOR TYPE-V 14, 020501 AA052531 micro switcH VL-11L
- 998680 TWO30014 coNTROL BOARD BRACKET (A)
16, gec025 TV010002 controL BoarD (B)
V7, 999024 TVO1C001 conTrot BoarD (A)
18, 998586 WTO90C02 MASK PLATE
19, 999023 CVO90011 spacer
- 998587 AA019552 coNTROL PANEL
21, 998696 PV070001 conTRoL PLATE (A)
22, 998675 CV020002 LEVER
23, 998697. PV0O70002 contRoL PLATE (B)
24, 999013 AA019534 PUSH BUTTON HOUSING, RED
- 370000 BPO50001 spring (A)
26, 999011 AA019533 PUSH BUTTON, RED
Wits AND GABINEL
V,
bd ! 2
©
wowonnwnmnr WrY MVNNNNHNHP EB HP BP eRe ee wa FWY OO AN MUM FWY Ff OO VIDEO AND CABINET ASSEMBLY wey eee ee LIEM: PART NO: REF. NO: DESCRIPTION: 998698
998980
998699
998704
998788
998705
998700
998658
998657
998656
998659
998955
999027
998582
998693
998589
998739
998692
998673
998672
998671
600002
999030
500027
998581 CV030026
AAM10103
CV030027
Cv030028
Tv090009
Cv030025
AAQ13520
CV030003
AAO13511
AA016501
Cv030002
AA051717
AA018558
AAQ19559
AAO13619
AAQ19558
WT050002
AAO13618
AAQ13604
AA013603
AAO13602
AAO16559
AAO16560
AA052512
AA019551 SUPPORT BRACKET (C)
vibeo 14” coLOR MONITOR
SUPPORT BRACKET (1)
VIDEO CIRCUIT BOARD SUPPORT
GUIDE RAIL
VIDEO BRACKET
COIN CHUTE (C)
GUIDE PLATE
LOCK PLATE
LOCK AND KEY
CASH BOX
CAOUNTER ME-5
PACKING
COUNTER BOX
CONTACT PLATE (B)
CONTACT PLATE GUIDE
SPRING
CONTACT PLATE (A)
LOCK LEVER
LOCK PLATE
LOCK LEVER PIN
SERVICE Lock #7900
SERVICE KEY #7900
25¢ COIN REJECTOR
COIN ENTRY COVER
PHIN(EU GUAR ANU
REGULATOR Ass
¥
PRINTED BOARD AND REGULATOR ASSEMBLY
ITEM: PART NO: REF. NO: DESCRIPTION: 1, 998674 WNO30015 PUNCHING METAL
- 999026 WNO90007 Net
3, 998961 AAT71001 speaker, 8 Onm, 5 W., 12cm. 4, 998442 AAO55949 AMPLEAF CONNECTOR, 18P
- 998686 TUO20001 sHAFT
- 998699 AAO19547 p.c. BOARD GUIDE (A)
- 998284 AA0S2501 ToceLe switcH S-301
- 998894 PVNOO004 pv-GAME P.C. BOARD ASSEMBLY 9, 998442 AAO55949 aAMPLEAF CONNECTOR, 18P
- 998905 CVNOO004 cv-cpu P.c, BOARD ASSEMBLY (8B)
- 998892 PVNOO002 pv-cpu P.c. BOARD ASSEMBLY
12, 998685 WT090008 p.c. BOARD GUIDE (B)
LB. 998698 CV030022 sToP BRACKET
14, 997906 AAT41175 capacitor, 35Lasn, 4700 1, 997905 = AAT41172_—s capacitor, 35Lasn, 1000 16, 998383 AA057575 TRANSFORMER 7, 998959 AA055700 ~—s Fuse HoLDEeR F400 18, 998029 AAT14029_—srecTIFIER, S4VB
19, 998701 AAQ13610 TRANSORMER MOUNTING BOX
- 998285 AA052535 ToceLe swiTcH S-2A
21, 998956 AAQ55788 AC socKET BOX-TYPE
22, 998787 AAQ18506 Grommet NG-79-E
23, 998873 AAM50012 coUNTER DRIVE P.C. BOARD ASSEMBLY
24, 998441 AA055720 pRINT connector, 1OP
25, 998667 AA013607 CONNECTOR & SWITCH BRACKET
ITEM: PART NO: 26.
27,
28,
29,
30.
31,
32,
33,
34,
35,
37.
38, PUNT ED KUAKD AND KEGULAIOR ASSEMBLY - CONTINUED
REF. NO: DESCRIPTION: 998521
998280
998702
800010
998703
998962
998785
998960
998385
998585
998957
998954 TV090010
AA068717
AAO13613
AAM60009
AAO13614
AAT61017
AA018555
AAQ58581
AA057582
AA069568
AA055784
AA056508 INSULATOR
TILT SWITCH
SHIELD BOX
SWITCHING REGULATOR ASSEMBLY
SHIELD COVER
NOISE FILTER ZMB2206-02
GASKET
FAN WEJ-55B4
TRANSFORMER
MOLD CORD BUSH
FUSE HOLDER S-N2056
EARTH TERMINAL 1-375
a SSAVAAVSSARSBSSATESERRARREREBERARRREERRARARBAREREREREESBSEBESBEBBEBES BRSHSFS AW AAAs assWBusasununannenesanuunanaeses o. QDACE WADERS
INSTALLATION INSTRUCTIONS
#960024
TAITO AMERICA CORPORATION
1256 Estes Avenue, Elk Grove Village, IL 60007 SESSESSSERSESESEESESESSEE ES ESE ECE EEEEEECER SOY wuauaresé Lae DS EEDDEEEEESS ESSE SEE ESE SESE SESE EE SS SESS SSR RR DDD YG
- Name of Part (See Figs. 1. and 2)
1-Player
Start’ Button Video Screen
Control Lever
2-Player Start Button
Fire Button
Coin Slot
Fig. 1
Main Fuse~
Control Lever
Power Switch
Fire Button Ground Terminal
Power Cord & Plug
Fig. 2
- Transportation and Installation
o Avoid rough handling in Transportation; picture tube is fragile. ;
o Taito "T.T. SPACE INVADER PART I" is for indoor use.
o Install the machine indoors only.
0,9 ~~
© Do not install the machine outdoors,
o Install the machine on a flat-surfaced floor and provided suitable space around the machine.
.—I
o Do not install the machine in dangerous places viewed from the angle of disaster prevention.
(Emergency Exit) Fire Alarm
o Do not install the machine in location with exposure to direet sunlight or excessive heat in order to prevent the unit from rising internal temperature. Also, do not install the machine in humid or dusty places.
o Ensure all connections to the PCB's are secure.
o Never fail to connect the ground terminal.
o Insert the power plug ‘into a proper outlet and turn the power switch on.
- Handling Note and Warning
o Erroneous picture may appear on the screen when the machine is first switched on. This is typical of the CPU circuitry, and will correct itself automatically when the power switch is off and on.
o No picture may appear.on the screen for a while when the machine is switched on at a subzero temperature in the location. This is also typical of the solidstate circuitry.
o Taito "T.T. SPACE INVADER PART IL" uses & CPU and the
latest solid-state circuitry for long life, however, as with sophisticated electronic equipment certain
precautions must be observed to avoid damage.
- Do not attempt to service with ordinary testing
equipment, since the internal voltage of the testing equipment may cause damage to the circuitry.
- Never connect or disconnect any of the solid-state
modules while the power is on.
- Routine Maintenance
o Because of the solid-state electronic circuitry, this machine should require very little maintenance and only occasional adjustments, however, it is necessary to take measures to insure its daily safety.
Playing Instructions
° One or two Players.
Insert coin(s). 1 coin - 1 play (3 laser bases... Adjustable) 2 coins - 2 plays(or 2 player game)
Select one or two player game.
As the "attacking sound" is heard, invaders appear on the screen. Also, a laser base and four fortresses appear on the lower side of the screen.
To move the laser base left or right move the control lever
To fire laser, push the fire button.
In two player mode, the play alternates between the two.
seeceecceses 500 pts. Scoring:
? de eececccees 2 ? oy
ro secceeeecess 30 pts.
wh ee eececcceee 20 pts.
ole beeeeeeceeee 10 pts. Functional description of Game:
o Invaders advance step by step against the laser base as they move left and right.
o Fortresses are gradually destrayed by the attack of invaders. They are also destroyed by laser.
o As the numer of invaders decreaes, they move fast.
°
o A MYSTERY-UFOhit gives the player mystery score (50, 100, 150, or 300 points).
When score reaches 1,500 points(adjustable), a bonus laser base appears with "beep" sounds.
o UFO will randomly drop' invaders.
o When a invader is hit, it will be sometimes divided into two.
o Game ends when all laser bases are hit by invader missiles or when invaders overrun the base.
o High-score's name can be registered on the screen as follows: (Any dislike-sentence can be canceled by using the cancel button. However, the high score can not rubbed out.) ©
Method:
- The alphabets ("A"-"Z"), "RUB", and "END" will be displayed on the screen, By moving the control lever, move the red underline to the alphabet one by one so that the highscore's name can be spelled.
- An alphabet on the red underline can be resistered at a time on the screen by pushing the fire button
"RUB" ... If any wrong alphabet has been registered, move the red underline to the word "RUB", and push the fire button so that the alphabet will be controled.
"END" ... When finishing the high-scorer's name registration, move the red underline to the word "END" and push the fire button.
- The high-scorer's name register can be made within one and half minutes. After one and half minutes passed, the
registration will be automalically stopped. (In total. ten alphabets can be registered.)
SCORE-1 SCORE-2 18000 18000 08700
HIESCORER REGISTRATION
ABCOEFGHIUK a eee WXYZ. RUB END
MAME MR,TAITO
CREDIT O SCORE-1 MA.TAITO SCORE-2 03100 18000 00000
al
RAR
on RAR
CREDIT 1
ob. Adjustments on rower supply F.C Hoard (See Fig. 4)
o To check the.output voltages, measure them on the Gconnector or the'Q-connector. (See the cable block diagram, AAROO189 in this manual.)
F: -5V VR 1®@ © + 12¥ VR Fa
Fig. 4
o +5V VR... Pot for adjusting 5V line voltage (Adjustable range: 4.5V° —5.5V DC) Set approx. 5V ,
o -5V VR... Pot for adjusting -S5V line voltage (Adjustable range: -5.5V - -4.5V DC) Set approx. -5V. (When the 5V line has no load, this -5V voltage does not appear.)
o +12V VR ... Pot adjusting 12V line voltage (Adjustable ranger 10.8V - 13.2V DC) Set approx. 12V.
- Adjust..ments on Game & Sound PC Board (See Fig. 5 and Table 1)
To increase the sound, turn each pot(VR1 ~- VR8) as show below.
Fig. 5
o VR1 ... Pot for adjusting volume of UFO.
o VR2 ... Pot for adjusting volume of laser base when firing.
o VR3 ... Pot for adjusting volume of laser base when destroyed.
o VR4 ... Pot for adjusting volume of invaders when destroyed.
o VRS ... Pot for adjusting volume of "beep" when bonus is awarded.
o VR6 ... Pot for adjusting volume of invaders when advancing.
o VR7 ... Pot for adjusting volume of UFO when destroyed.
o VRS ... Pot for adjusting total sound volume.
Change-over for DIP. Switchs:
o SW1 ... Switch for changing-over the number of laser
° Sw2 ...
SwW3 ...
Sw4 ... bases.
The number of laser bases is preset at "3" at the
factory.
Switch for rotating images on the screen. When this switch is set at "ON" position, the images on the screen will be rotated.
This switch should be always set at "ON" position.
Switch for adjusting the solid-state modules. This switch is for the factory adjustments, and should be set at "OFF" position.
Switch for checking When the switch is set at "OFF" position, the checking can be: done. Normally, this switch is to be set at "ON" position.
SwS5, SW6, SW7 ... Switchs for adjusting the solid- state
SWS... modules
These switch are for the factory adjustments, and should be always set at "ON" position.
Switch for displaying the play-pricing (1 COIN 1 PLAYER, 2 COINS 2 PLAYERS) on the screen.
When the switch is set at "ON" positon, the play-pricing will be displayed. This switch is preset at "ON" position at the factory.
ia
- Adjustments on Color Video Monitor (See Fig. 6)
NOS
FIGURE 6
The color video monitor is properly adjusted before shipping, however, if necessary, readjust as follows:
e Screen Brightness Adjust the BRIGHT control to keep the screen clear. @ FOCUS ... Screen Focus Control.
Color Control: ° RED... Pot for adjusting red color. e GREEN... Pot for adjusting green color. e BLUE... Pot for adjusting blue color.
- Adjustments of Supply Voltage (See Fig. 7)
If the voltage of the power supply is low, the picture on the screen sometimes flickers. In that case, change the
terminal of the power transformer in the cabinet. This adjustment is obtained by the use cf the cange-over
switch.
20V
ov
[ . ov
ov
ov
- Typical Picture During Play (See Fig. 8) High Score
Score of player 1 Score Player 2
SCORE -1 Ht SCORE SCORE-2 3320 08000 0000
Invaders
Instructions
Fortress Laser Base
Number of Leser Base
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.