Virtua Fighter 2
Virtua Fighter 2 (Version 2.1) (Sega, 1994) · Manual · 44 pages · 29 sections · original scan
Pecoae FiphsorZ SERVICE MANUAL
seer ENTERPRISES, LTD. MANUAL NO. 999-0:
Table Of Contents
Page
TV. Introductions 0.2.00. e cece eee cree eee e eect te eect ne eeeeeeees 1
- Game Handling Precautions ...... 02... cece cece cee eect e cece eneee 2
- Prevention of Counterfeiting ©... 2.0.0... cece cece eee e eens cece eens 3
- Installation Precautions ........ 6.0. e cee beeen ees 4-5
- Part Name, Locations ..... 6... cece ect tenner ene ned 6
DT EA Oe eee elt tlle et wlele tb lleee tlle t tlelecet klald 7
- Fluorescent Lamp Replacement .......... 0.0.0.0 cece cece cee e eee eee eens 8
- Monitor Adjustment ..
- — Printed Circuit Board Handling Precautions ......... 0.00. cc eee cece eee nN
- Test Mode
NN. Game Board Assembly ...... 0... cece eee centre need 34
- Shift Case Assembly (Card Cage) ....... 6... cece cee eee eee eee 35
- Fluorescent Lamp Assembly ........0 0.0... c ec ee eee e eee e eee eee eee 36
- Control Panel Assembly ....... 0... ccc cece eee teen tenet e nent eens 37
- Switch Bracke! oe eee eee 38
- Sound Board Assembly 1.2.0... cece cece cee cette eter e ene eens 39
- Power Unit Assembly 20... 606. c cece cece cece een eee eens 40
- Wire Color Code
- Wiring Diagram
Save mt ad www. basementarcade.com CLASSICS
Introduction
SEGA ENTERPRISES, LTD., supported by its high electronic technology of LSIs, microprocessors, otc. and a wealth of experionco, has for more than 30 years
been supplying various innovative and popular game machines to the world market. This Owner’s Manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of
electronic assemblies, electromechanicals, servicing control, spare parts, etc., as regards VIRTUA FIGHTER 2, a new SEGA product.
This manual is intended for those who have knowledge of electricity and technical expertise especially in ICs, CRTs, microprocessors, etc. Carefully read this manual to acquire sufficient knowledge before working on the machine. Should there be a malfunction, nontechnical personnel should under no circumstances touch the interior system. Should such a case arise, contact our Main Office or the closest branch office listed as follows:
SEGA ENTERPRISES, INC. (U.S.A) CUSTOMER SERVICE 45133 Industrial Drive Phone: 415-802-1750 Fremont, California 94538, U.S.A. Fax: 415-802-1754 fy oat hee Ament www. basementarcade. com C4 AS BAGS
Game Handling Precautions
When installing or inspecting the machine, be very cureful of the following points and pay attention to ensure that the player can enjoy the game safely.
mm
mm
*
*k Ok
mK
ps Be sure to turn the power OFF before working on the machine.
To insert or pull out the plug quickly is dangerous.
Itis necessary to make sure that the power cord or the grounding wire is not exposed on the road, etc. in a manner so as to be dangerous. Make sure that grounding connections are made safely at the position where so specified.
Do not use any fuse that does not meet specified rating.
Make complete connections for the IC board and other connectors. Insufficient insertion is very dangerous.
The operating (ambient) temperature range is from 5°C to 40°C.
When cleaning the CRT surfaces, use a soft, dry cloth. Do not apply chemicals such as thinner, benzine, etc.
Also, for the IC board circuit inspections, only the logic tester is allowed.
After confirming that there are no irregularities, turn the power ON.
et ww, basementarcade. com CLASSICS
Prevention of Counterfeiting and Conversion
2K LABELING
To prevent counterfeits and conversions, the following labels are put on all the SEGA products. When handling such goods, be sure to confirm the labels. They are used to prevent illegal acts such as the unauthorized copying of the products and the printed circuit boards thereof or carrying on business by manufacturing similar merchandise or by converting, selling or using such products or printed circuit boards.
MK ORIGINAL SEAL ow LICENSE SEAL
The following seal is put on the machines The following seal is put on all SEGA kits, such manufactured by SEGA. as the printed circuit boards.
3k COPYRIGHT NOTICE
This SEGA product has the copyright notice as follows:
© SEGA 1994
This signities that this work was disclosed in 1994 and is the property of SEGA ENTERPRISES, LTD.
v ap www. basementarcade com OL AS SICS
Precautions Concerning Installation Location
The Virtua Fighter 2 is an indoor game machine DO NOT INSTALL IT OUTSIDE UNDER ANY CIRCUMSTANCES. Even indoors, avoid installing in places mentioned below so as to ensure proper usage:
*
wk we ke ke ok Ok
INSTALLATION PRECAUTIONS
mm
aK
*
ELECTRIC CURRENT CONSUMPTION
om Places subject to rain or water leakage, or condensation due to humidity.
In the proximity of an indoor swimming pool and/or shower.
Places subject to direct sunlight.
Places subject to heat sources from heating units, etc., or hot air.
Vicinity of anti-disaster facilities such as fire exits and fire extinguishers.
Places subject to any type of violent impact.
Dusty places.
Do not insert more than one electrical plug into the power plug socket.
The per unit standard voltage/amperage is 100—120V/5A.
If an extension cord is to be used, use a cord of 5A or higher rating.
2.1A, 250 Watts, 120VAC, 60 Hz
www. basementercede.com CLASSIC?
Installation Precautions & Transportation of Machine
ADJUSTING LEG ADJUSTERS
The Virtua Fighter 2 has 2 Casters and 4 Leg Adjusters. Cause the Leg Adjusters to come into contact with the floor, and secure the muchine in place. Make adjustments in the height of the Leg Adjusters in a manner so that the Casters will be raised approximately 5mm from the floor level, and secure the Adjusters’ height by fastening the Nuts. (If the gap is less than 5mm, the machine may move while the game is being played and become dangerous.)
SIDE VIEW BOTTOM VIEW
Caster (PN 999-0208) ae aa rea eat va _— Casters “a — 7 Approx. 5mm
Leg Adjustor (PN 999-0210)
WHEN TRANSPORTING THE MACHINE
When moving the Cabinet, retract the Leg Adjusters to cause the Casters to make contact with the floor. Also, in the case where there are differences in floor levels, transport the Cabinet by holding the catches on both sides of the Cabinet and lifting it up.
: mc ave www. basementarcede.com OF ABS DICS
Model Sur-007-02
DEPTH WIDTH HEIGHT WEIGHT i 30” 75" Approx 404 Ibs.
Bill Board (PN 999-0359) att Marquee Header Glass (PN 999 0363)
Monitor Glass (PN 999-0358)
26" Nanao Monitor Left Side Decal (2001-5187-01)
(PN 999-0354)
Right Side Decal (PN 999-0355)
/}-— Control Panel
Control Panel Overlay (PN 999-0356)
RCAD www. basementarcade.com OL ADSICS
Switch Unit
Open the cain chute door and the switch unit shown will appear. The functioning of each SW is as follows:
a Rw ND SERVICE SWITCH (Service Button) gives credit without registering on the coin meter.
TEST SWITCH for the handling of the test button, refer to the following pages. SOUND VOLUME adjusts the sound volume of the Speaker. COIN METER registers coins accepted for play. DEGAUSS SWITCH corrects color impurity.
cna
Volume
Test Service
QW. Coin Degauss _O \
nears www. basementercade. com CLASSICS
Fluorescent Lamp Replacement
1 Remove (6) #8 Screws holding Billboard to Cabinet. Remove Billboard.
2 Remove (4) 8 x 1/2" Panhead Screws holding Top Header Retainer Bracket. Remove Retainer Bracket.
3 Remove (4) 8 x 1/2” Panhead Screws holding Bottom Header Retainer Bracket. Remove Retainer Bracket.
4 Carefully remove Header Marquee Glass. 5 Replace 24” Lamp or Starter as needed
6 Replace Glass, Top & Bottom Retainer Bracket with the 8 Screws that were previously removed.
TEs
ty www. basementarcade. com O84 AS BIOS
Control Panel/Monitor Adjustment
To unlatch Control Panel, open Coin Door, reach through Coin Door and lift Clamp Tab up. The Latches are located at the upper left and right corners of the Control Shelf. Once the Latches are opened, the Control Panel can be tilted down and the Monitor Glass removed. Remove the Monitor Bezel to gain access to gain access to the Monitor Controls.
amen
yo To Open ; 08° Do ec”
Exploded View Of Latch Mechanism (Ga aes
e weer a www. besementarcade. com GLAS atc 3s
26” Monitor
Remove the Control Panel, Monitor Glass and Bezel to make the monitor adjustments.
IK -V. POS! [Vertical Position Control) adjusts the vertical display position of the image.
SK V. HOLD (Vertical Synchronization Control) adjusts the image running from left to right.
MK V.SIZE (Vertical Size Control) adjusts the length of the screen.
KH. PHASE (Horizontal Position Control) adjusts the horizontal display position of the image. KH. HOLD (Horizontal Synchronization Control) adjusts the image running from left to right. WKH. SIZE (Horizontal Size Control) adjusts the width of the screen. For adjustments, utilize the Alignment Screwdriver.
MK BRIGHT (Brightness Control}
HK B.GAIN MK G.GAIN 9K RGAIN Adjusts colors (Ordinarily, B.C.R. BIAS should not be touched.)
HK FOCUS (Focus Control)
DK SCREEN (Focus Control} (Ordinarily, SCREEN should not be touched.)
MAIN BOARD a V. POSITION v.uN od V.HOLD IV. size HOLD ‘ H. PHASE
- H. POSITION | H. SIZE | ____ BRIGHT ———_B. BIAS |--——_B. GAIN eas Lo— j G. GAIN R. BIAS FOCUS (UPPER) R. GAIN | SCREEN (LOWER)
vaww. basementarcede.com O@ AS arc 3
ant
Printed Circuit Board Handling Precautions
* When installing and removing the IC Board, make sure that the cabinet’s Main Power is OFF
Foreign matter, including dust on the IC Board, may cause malfunctioning (short circuit, combuslivn, elc., due to the Board’s generation of heat) to occur. Therefore, keep the IC Board surfaces always clean. Completely perform the connections of the IC Board's and other item’s Connectors. Insufficient connector insertion may cause the IC Board to be damaged. Therefore, pay careful attention to this point. Also, for the IC Board circuit inspection, only the usage of logic testers is permitted.
The Model-2A P.C.B., when used without the Shield Case, may have a radio wave fault. Therefore, be sure to utilize the Ancillary Shield Case. Should any problem arise when the above-mentioned Shield Case is not utilized, SEGA will not be held responsible whatsoever. The contents of the product herein described are subject to change without notice.
The DIP Switches on the I/O Board and Sound Board are all set to OFF at the time of shipment. Do not change the setting without good reason.
www. basementarcade.com CLASS
Test Mode
This mainly checks if the operation of the game BD is accurate, makes monitor color adjustments, and allows for COIN ASSIGNMENTS/GAME ASSIGNMENTS setting adjustments.
Selection of TEST ITEMS
- Push the TEST SW to cause the following test item menu to appear:
TEST MENU
MEMORY TEST INPUT TEST SOUND TEST DISPLAY TEST
GAME ASSIGNMENT COIN ASSIGNMENT BOOKKEEPING BACKUP RAM CLEAR TGP TEST ALL INITIALIZE md EXIT
SELECT BY SERVICE BUTTON AND PUSH TEST BUTTON X y
- By pushing the SERVICE SW, bring the arrow mark “->” to the desired item and press the test button.
- When the test has been completed, bring “>” to EXIT and push the TEST button.
1 MEMORY TEST
Check the PCB’s memory ICs. When the IC is in good operating condition, “GOOD” will be indicated.
If there exists any malfunctioning of the IC’s. “BAD” will be indicated.
Ly ww. basementarcede.com OLAS BICS
Va MEMORY TEST
***ROmette Ic. 4 GOOD Ic. 5 GOOD Ic. 7 GOOD Ic. 8 GOOD Ic. 10 GOOD Ic. ll GOOD Ic. 13 GOOD Ic. 14 GOOD
***RAM*te Ic. 16 GOOD Ic. 17. GOOD IC. 46 GOOD Ic. 47 GOOD Ic. 49 GOOD Ic. 50 GOOD Ic. 55 GOOD Ic. 57 GOOD Ic. 59 GOOD Ic. 65 GOOD
PLEASE WAIT FOR A WHILE N Ic. Ic. IC. Ic.
Ic. Ic Ic. Ic. Ic. GOOD GOOD GOOD GOOD
GOOD GOOD GOOD GOOD GOOD
Push the TEST button to have the menu return on to the screen.
2 INPUT TEST
This test displays the state of each switch. It the switch goes ON when activated it is satisfactory.
<INPUT TEST>
PLAYER 1P uP : OFF DOWN : OFF RIGHT : OFF LEFT : OFF
PUNCH : OFF KICK : OFF GUARD : OFF
START ; OFF
COIN CHUTE] : OFF COIN CHUTE Z : OFF
- SERVICE SW OFF TEST SW OFF
PUSH TEST BUTTON TO EXIT 2P OFF OFF OFF OFF
OFF OFF OFF
OFF ~\
apreyet www. basementarcade.com CLASSICS
SW3 OR SW4
Push the TEST button to have the MENU return on to the screen.
3 SOUND TEST
This allows sound and background music used in the game to be tested.
- Press the TEST button to have the following TEST menu appear on the screen.
SOUND TEST
NO. 0 ADVERTISE
SELECT BY PLAYER 1 SIDE LEVER UP, DOWN PUSH PLAYER-1 SIDE PUNCH BUTTON TO MAKE SOUND PUSH TEST BUTTON TO EXIT Ne
- By moving the 1P side Lever upward and downward, choose the desired sound or background music. Press the 1P side Punch button to cause the music to be played.
- Push the TEST button to have the MENU return on to the screen.
4 DISPLAY TEST
RGB COLOR ADJUSTMENT SCREEN
This page allows for performing the monitor color check and the BIAS and GAIN settings
(— > DISPLAY TEST 1/2
RED
GREEN
BLUE
WHITE
COLOR BIAS GAIN — SCROLL: 31
RED 64 37 GREEN 64 37 BLUE 64 37 = EXIT
SELECT: 1P LEVER UP/DOWN BIAS SET:1P PUNCH/KICK GAIN SET:2P PUNCH/KICK 1A,
Each of the R (red), G (green) and B (blue) colors is darkest at the left-hand end and becomes brighter in 16 gradations towards the righthand end. The monitor brightness is satisfactory if the white color bar is black at the lefthand end and white at the righthand end. For BIAS and GAIN adjustments, first bring the arrow "->" to the desired color by using the 1P side Lever, and press the 1P side PUNCH/KICK buttons for BIAS and press the 2P side PUNCH/KICK BUTTONS for GAIN.
Normally, there is no need to make adjustments.
Pressing the TEST button causes the screen to proceed to the next page.
ARCA 3
www. basementarcade. com Of AS BASS
Il. MONITOR SIZE ADJUSTMENT SCREEN
This page allows the monitor size to be checked.
DISPLAY TEST 2/2
PUSH TEST BUTTON TO EXIT TUT TTT TTT
Make adjustments in a manner so that the checkered portions for checking do not go beyond the screen.
Press the TEST button to have the menu return on to the screen.
5 GAME ASSIGNMENT
Allows game difficulty adjustments setting to be changed
SELECTION OF DESIRED ITEM
- Press the SERVICE button to move the “>” and bring it to the desired item.
- Press the TEST button to change the setting.
- After the desired setting is finished, bring the “>” to “EXIT” and press the TEST button.
GAME ASSIGNMENTS
- MATCH COUNT (1P} 2 A MATCH COUNT (VS) 2 B DIFFICULTY NORMAL c ENERGY MAX (1P) :160 ENERGY MAX (VS) :200 STAGE WIDTH: 1400 ADVERTISE SOUND ON D CONTINUE ON E DRANK OK F COUNTRY JAPAN G DISPLAY TYPE PROJECTOR H VS FINISH OFF I RANK MODE OFF J INITIALIZE K EXIT
SELECT BY SERVICE BUTTON AND PUSH TEST BUTTON wv
(A) MATCH COUNT (1P) This sets the first to win how many points a match to be a winner in the case of IP play. The setting from 2 to 5 points is possible. As a standard, it is set to 2.
(B) MATCIT COUNT (PLAYER VS. PLAYER) This sets the first to win how many points a match to be a winner in the case of Player vs. Player play. The setting from 2 to 5 points is possible. As a standard, it is set to 2.
(C) DIFFICULTY Sets the game's overall difficulty (EASY~HARDEST; set to "NORMAL" in the standard setting.)
(D) ADVERTISE SOUND Determines whether ADVERTISE SOUND is to be emitted or not (set to ON in the standard setting).
(E) DRANK “DRANK” is set to NG as a standard. If you allow SHUN (sulken character) to drink, set to OK
(F) CONTINUE This sets CONTINUE play YES or NO. Set to ON for yes, and OFF for no. As a standurd, it is set to ON.
www. basementarcade. com 0“ ADS
(G) COUNTRY Message language (select LISA far the LIS, and EXPORT far other countrioe)
(H) DISPLAY TYPE Set to either of PROJECTOR or C.R.T. whichever suils the type of the cabinet.
(I) VS FINISH If this is set to ON, the game is over for both players.
W)) RANK MODE When using the RANK MODE, Set to ON.
(K) INITIAL Initializes all of the GAME ASSIGNMENT settings.
6 COIN ASSIGNMENTS
In this mode, the COIN/CREDIT setting, etc. can be changed.
SELECTION OF SETTING ITEM DESIRED:
- Press the SERVICE button to choose the setting item. The red characters indicate the presently selected item.
- Press the TEST button to cause the setting to change.
- To effectuate the above change, cause EXIT to be displuyed in red by using the SERVICE button, and then press the TEST button.
(O COIN ASSIGNMENT
COIN CHUTE TYPE COMMON A CREDIT TO START 2 CREDITS B CREDIT TO CONTINUE 2 CREDITS
COIN/CREDIT SETTING #1 Cc COIN CHUTE #1 1COIN 1 CREDIT COIN CHUTE #2 1 COIN 1 CREDIT
MANUAL SETTING D EXIT
SELECT BY SERVICE BUTTON AND PUSH TEST BUTTON
aa eo aR www. basementarcade.com OF AS arcs
(A)
(8)
(Cc)
(D) COIN CHUTE TYPE Set to either of the following as applicable. COMMON: 1 COIN CHUTE TYPE
INDIVIDUAL : 2 COIN CHUTE TYPE
CREDIT TO START, CREDIT TO CONTINUE Sets the credits required for starting the game and the credits required for continuing. CREDIT TO START can be set to 1-5 CREDIT TO CONTINUE can be set to 1~5. The settings can be made within a total of 15 patterns.
COIN/CREDIT SETTING Sets the CREDIT increase increment per coin insertion. There are 26 settings from #1 to #26, expressed in OO CREDIT as against OO COINS inserted.
#26 refers to FREE PLAY (SETTING #1 in the standard setting).
For details, refer to Table 1~2
MANUAL SETTING The CREDIT’S incremental increase settings as against a coin insertion are shown in further details than in {C) . . . for details, refer to Table 3. Also, note that when this MANUAL SETTING is performed, the COIN/CREDIT setting becomes ineffective.
www. basementarcade.com CL ADS
TABLE 1 : COIN/CREDIT SETTING
NAME OF SETTING COIN CHUTE 1 COIN CHUTE 2
SETTING #1 1 COIN 1 CREDIT 1 COIN 1 CREDIT
SETTING #2 1 COIN 1 CREDIT 1 COIN 2 CREDITS
SETTING #3 1 COIN 1 CREDIT 1 COIN 3 CREDITS
SETTING #4 1 COIN 1 CREDIT 1 COIN 4 CREDITS
SETTING #5 1 COIN 1 CREDIT 1 COIN 5 CREDITS
SETTING #6 1 COIN 2 CREDITS 1 COIN 2 CREDITS
SETTING #7 1 COIN 2 CREDITS 1 COIN 5 CREDITS
SETTING #8 1 COIN 3 CREDITS 1 COIN 3 CREDITS
SETTING #9 1 COIN 4 CREDITS 1 COIN 4 CREDITS
SETTING #10 1 COIN 5 CREDITS 1 COIN SCREDITS
SETTING #11 1 COIN © CREDITS 1 COIN 6 CREDITS
SETTING #12 2 COINS 1 CREDIT 2 COINS 1 CREDIT SETTING #13 2COINS | 1 CREDIT 1 COIN 1 CREDIT
SETTING #14 2 COINS 1 CREDIT 1 COIN 2 CREDITS
SETTING #15 1 COIN 1 CREDIT 1 COIN 1 CREDIT
2 COINS 3 CREDITS 2 COINS 3 CREDITS
SETTING #16 1 COIN 1 CREDIT 1 COIN 3 CREDITS
2 COINS 3 CREDITS
SETTING #17 3 COINS 1 CREDIT 3 COINS 3 CREDITS
SETTING #18 4 COINS 1 CREDIT 4 COINS 1 CREDIT
SELIING #19 1 COIN 1 CREDIT 1 COIN 1 CREDIT
2 COINS 2 CREDITS 2 COINS 2 CREDITS
3 COINS 3 CREDITS 3 COINS 3 CREDITS
4 COINS 5 CREDITS 4 COINS 5 CREDITS
SETTING #20 1 COIN 1 CREDIT 1 COIN 5 CREDITS
2 COINS 2 CREDITS
3 COINS 3 CREDITS
4 COINS 5 CREDITS
www. basementarcade. com CO“ AD 2708
TABLE 2 : COIN/CREDIT SETTING
NAME OF SETTING COIN CHUTE 1 COIN CHUTE 2
SETTING #21 3 COINS 1 CREDIT 1 COIN 2 CREDITS
5 COINS 2 CREDITS
SETTING #22 2 COINS 1 CREDIT 2 COINS 1 CREDIT
4 COINS 2 CREDITS 4 COINS 2 CREDITS
5 COINS 3 CREDITS 5 COINS 3 CREDITS
SETTING #23 2 COINS 1 CREDIT 1 COIN 3 CREDITS
4 COINS 2 CREDITS
5 COINS 3 CREDITS
SENTING #24 1 COIN 1 CREDIT 1 COIN 1 CREDIT
2 COINS 2 CREDITS 2 COINS 2 CREDITS
3 COINS 3 CREDITS 3 COINS 3 CREDITS
4 COINS 4 CREDITS 4 COINS 4 CREDITS
5 COINS © CREDITS 5 COINS © CREDITS
SETTING #25 1 COIN 1 CREDIT 1 COIN 6 CREDITS
2 COINS 2 CREDITS
3 COINS 3 CREDITS
4 COINS 4 CREDITS
5 COINS 6 CREDITS
SETTING #26 FREE PLAY FREE PLAY
ARCA 3
www. basementercade. com Of AS BIGS
TABLE 3 : MANUAL SETTING
COIN TO CREDIT 1 COIN 1 CREDIT
2 COINS 1 CREDIT
3 COINS 1 CREDIT
4 COINS 1 CREDIT
5 COINS 1 CREDIT
6 COINS 1 CREDIT
7 COINS 1 CREDIT
8 COINS 1 CREDIT
9 COINS 1 CREDIT
BONUS ADDER NO BONUS ADDER
2 COINS GIVE 1 EXTRA COIN
3 COINS GIVE 1 EXTRA COIN
4 COINS GIVE 1 EXTRA COIN
5 COINS GIVE 1 EXTRA COIN
6 COINS GIVE 1 EXTRA COIN
7 COINS GIVE 1 EXTRA COIN
8 CUINS GIVE | EXTRA COIN
9 COINS GIVE 1 EXTRA COIN
COIN CHUTE #1
MULTIPLIER 1 COIN COUNTS AS 1 COIN
1 COIN COUNTS AS 2 COINS
1 COIN COUNTS AS 3 COINS
| COIN COUNTS AS 4 COINS
1 COIN COUNTS AS 5 COINS
1 COIN COUNTS AS 6 COINS
1 COIN COUNTS AS 7 COINS
| COIN COUNTS AS 8 COINS
1 COIN COUNTS AS 9 COINS
COIN CHUTE #2 1 COIN COUNTS AS 1 COIN
MULTIPLIER 1 COIN COUNTS AS 2 COINS 1 COIN COUNTS AS 3 COINS
1 COIN COUNTS AS 4 COINS
1 COIN COUNTS AS 5 COINS
1 COIN COUNTS AS 6 COINS
1 COIN COUNTS AS 7 COINS
1 COIN COUNTS AS 8 COINS
1 COIN COUNTS AS 9 COINS
EXAMPLES FOR THE CALCULATION OF CREDITS SET IN THE “MANUAL” SETTING
Example 1
COIN TO CREDIT 4 COINS 1 CREDIT BONUS ADDER . 2 COINS GIVE 1 EXTRA COIN COIN CHUTE MULTIPLIER TIPPEE TCD EE Sleds sloled tle t tlelald eu lela 1 COIN COUNTS AS 2 COINS
In the above setting , when 7 coins are inserted in the 1P COIN CHUTE, the number of 1P credits will be as follows:
- As per the COIN CHUTE MULTIPLIER setting, since 1 coin inserted counts as 2 coins, 7 coins inserted will he equivalent to 14 coins.
- According to the BONUS ADDER setting, every 2 coins earn one service coin, therefore, the equivalent of 14 coins will have 7 service coins added, resulting in the equivalent of 21 coins
- According to the COIN TO CREDIT setting, 4 coins make 1 credit, therefore, the equivalent of 21 coins makes 5 and a quarter credits.
Example 2
COIN TO CREDIT BONUS ADDER COIN CHUTE #1 MULTIPLIER ....6 COINS 1 CREDIT . .3 COINS GIVE 1 EXTRA COIN
1 COIN COUNTS AS 4 COINS
1 COIN CHUTE COUNTS AS 5 COINS
ARCA 3 e www. basementarcade. com Of AS BICS
In the above settings, when 3 coins are inserted into COIN CHUTE #1 and 5 coins into COIN CHUTE #2, the number of CREDITS will be as fallaws:
- According to COIN CHUTE #1 MULTIPLIER setting, one coin inserted counts as four coins, therefore, 3 coins are equivalent to 12 coins.
- According to the COIN CHUTE #2 MULTIPLIER setting, one coin inserted counts as 5 coins, therefore, 5 coins inserted into COIN CHUIE #Z will be equivalent to 25 coins.
- The total number of coins in COIN CHUTE #1 and #2 will be equivalent to 37 coins.
- According to BONUS ADDER setting, every 3 coins will earn one service coin, therefore, the equivalent af 37 coins with 12 service coins will be equivalent to 49 coins.
5} According to COIN TO CREDIT setting, 6 coins make 1 CREDIT, therefore, the equivalent of 49 coins equals 8 and one sixth CREDITS.
7 BOOKKEEPING
This test mode allows each of the CREDIT/TIME/GAME data to be ascertained.
- GLOBAL DATA DISPLAY
( BOOKKEEPING 1/5 nn GLOBAL DATA 1
COIN CHUTE #1 00 A COIN CHUTE #2 00 B TOTAL COINS 00 Cc COIN CREDITS 00 D SERVICE CREDITS 00 E TOTAL CREDITS 00 F TOTAL TIME OOD OOH OOM 00S G PLAY TIME OOD OOH OOM 000S H PLAY TIME RATIO (* 1000} 00 i] TOTAL GAME COUNT 0 J 1P 0 K VS fo) L 1P GAME TIME A OD OH OM OS M WAIT GAME TIME A OD OH OM OS N VS GAME TIME A QOD UH UM US oO TOTAL AVERAGE TIME A OM OS P IP. OM OS. Q VS OM OS. R PUSH SERVICE BUTTON TO CONTINUE PLISH TEST BUTTON TO EXIT
BAS AR www. basementarcade.com OF
(A)
(8)
(C)
(b)
(E)
(F)
(G)
(H)
(!)
0)
(kK)
(u)
(M)
(N)
(O)
(P)
(Q)
(R) COIN CHUTE #1 Displays the number of coins inserted in COIN CHUTE #1 COIN CHUTE #2 Displays the number of coins inserted in COIN CHUTE #2 TOTAL COIN Total number of times both the COIN CHUTES are actuated
COIN CREDIT Number of CREDITS registered by COIN insertion only. SERVICE CREDIT The SERVICE SWITCH usage frequency.
TOTAL CREDIT Total number of CREDITS
TOTAL TIME Muchine’s total actuated time (excluding the test performance time)
PLAY TIME Display game play time. PLAY TIME RATIO Displays the ratio of play time as against the total POWER-ON time. TOTAL GAME COUNT Total game play frequency. (K) + (L)
1P GAME COUNT Displays the 1P (against CPU) play frequency. VS GAME COUNT Displays player vs. player play frequency.
1P GAME TIME A Displays the 1P play’s total time. WAIT GAME TIME A Total game time excluding buy-in vs play time.
VS GAME TIME A Displays the total vs play time. TOTAL AVERAGE TIME Average game play time ((M) + (O) * 2)/U)
1P AVERAGE TIME Displays the 1P play average time. (M)/(K) VS AVERAGE TIME Displays the 2P (player vs. player) play average time. (O}/(L)
Press the SERVICE button to proceed to the next page. Press the TEST button to have the MENU return on to the screen.
www. bacementarcade.com Of ASS
- GLOBAL DATA B DISPLAY
(s)
{T) BOOKKEEPING 2/5
( BOOKKEEPING 2/5
GLOBAL DATA 2 -TYPE-B DATA- START CONTINUE 1P PLAY COUNT te) 0 VS PLAY COUNT 0 0 1P AVG. PLAY TIME OM OS OM OS VS. AVG. PLAY TIME OM OS OM OS TIME -1P START- -VS START- -1P CONTIINUE- = -VS CONTINUE- 0~30S
~1M ~1M30S 10M~
PUSH SERVICE BUTTON TO CONTINUE PUSH TEST BUTTON TO EXIT Ne
1P PLAY COUNT VS PLAY COUNT Displays 1P and VS games’ play frequencies. 1P AVG. PLAY TIME VS AVG. PLAY TIME Displays 1P play average time and vs. play average time. (U) “By play time” play frequency for 1P and vs. game.
se Tt 2 Renee www. bazcmentarcade.com Of AB S208
- 1P GAME DATA DISPLAY
‘ail BOOKKEEPING 3/5
1P GAME DATA
GAME COUNT fe) Vv
TOTAL TIME OD OH OM OS Ww AVG TIME OM OS x MIN TIME OM OS . MAX TIME OM OS Z CONTINUE COUNT oO 0
SET COUNT O° b
DRAW COUNT O° c
WIN BY K.O. COUNT fe) d WIN BY RING OUT COUNT ° ° WIN BY JUDGE COUNT fe) f ---COUNT--- ---TIME--- g ROUND TOTAL WIN TOTAL AVG. WINRATE (TH) (TIMES) (TIMES) (SEC) (SEC) (* 1000) SQGOMNGAMRWNH- PUSH SERVICE BUTTON TO CONTINUE PUSH TEST BUTTON TO EXIT
(Vv). GAME COUNT Displays 1P play frequencies. (W) TOTALTIME Displays the total play time (1P side)
(X) AVG TIME Displays the average play time (1P side)
(Y), MIN TIME Displays the minimum play time (1P side}
www. basementarcede. com O8
(2)
(a)
(b)
(c)
(a)
(e)
(f
(9) MAX TIME Displays the maximum play lime (1P side) CONTINUE COUNT Displays the CONTINUE play ratio (1P side} SET COUNT Displays the Total 1P game set DRAW COUNT Displays 1P plays’ draw frequency. WIN BY KO COUNT Displays the ratio of winning by KNOCK OUT (1P side) WIN BY RINGOLIT COLINT Displays the ratio of winning by RING OUT (1P side} WIN BY JUDGE COUNT Displays the ratio of win by a decision. Displays per round frequency, win frequency, total play time, average play time and win ratio in the 1P play.
Press the SERVICE button to turn the page. Pressing the TEST button causes the MENU to return on to the screen.
- VS GAME DATA DISPLAY
BOOKKEEPING 4/5 inh
VS GAME DATA GAME COUNT 0 GAMETIME COUNT h TOTAL TIME OD OH OM OS (SEC.) (TIMES) i AVC. TIME OM OS ~10 ° i MIN TIME OM 0S ~13 k MAX TIME OM OS ~16 | CONTINUE COUNT te) m SET COUNT ie) n DRAW COUNT ie) ° WIN BY K.O. COUNT 0 p WIN BY RING OUT COUNT ie) q WIN BY JUDGE COUNT fe) r ~103 134~ PUSH SERVICE BUTTON TO CONTINUE Nl PUSH TEST BUTTON TO EXIT /) 2
@Are apt 28 www. basementarcade.com Of ABBIOS
- GAME COUNT Displays play frequencies in the case of Player vs. Player play.
- TOTAL TIME Displays the total play time in the case of Player vs. Player play.
- AVG TIME Displays the per player average play time in the case of Player vs. Player play. {k} MIN TIME Displays the minimum play time in the case of Player vs. Player play. (I] MAX TIME Displays the maximum play time in the case of Player vs. Player play. {m) CONTINUE COUNT Displays CONTINUED frequency in vs. plays.
- SET COUNT Displays the tutul sels in vs. plays.
- DRAW COUNT Displays draw frequency in vs. plays.
- WIN BY KO COUNT Displays WIN frequency by KO in vs. plays.
- WIN BY RING OUT COUNT Displays WIN frequency by RING OUT in vs plays.
- WIN BY JUDGE COUNT Displays WIN frequency by decision in vs. plays.
The righthand side portion of the screen displays “by play time” play frequency in one vs play. This can be utilized as a standard for setting difficulty levels, etc.
Press the SERVICE button to turn the page. Pressing the TEST button causes the MENU to return on to the screen.
www. basementarcade.com 06 AS B:
- VS GAME DATA DISPLAY
~\ BOOKKEEPING 5/5 VS GAME DATA 2
VS DIAGRAM
MY CHAR, : AKIKA
V.S. CHAR. WIN LOSE 0% RATE. 100% AKIRA fo) ie) - JACKY 0 0 SARAH 0 0 KAGE 0 ie) LAU 0 ie) JEFFRY 0 0 PAI ie) 0 WOLF 0 0 SHUN fe} fe} LION 0 ie)
SELECT BY PLAYER 1 SIDE LEVER UP/DOWN PUSH SERVICE BUTTON TO CONTINUE PUSH TEST BUTTON TO EXIT NX 7
Displays the win/loss frequencies and win rate (against each character) of the character selected as "MY CHAR.”.
Press the SERVICE button to turn the page. Pressing the TEST button causes the MENU to return on to the screen.
- BACKUP DATA CLEAR
Clear the contents of BOOKKEEPING.
BACKUP RAM CLEAR
YES (CLEAR)
+ NO (CANCEL)
SELECT BY SERVICE BUTTON AND PUSH TEST BUTTON
Base 2
ARCA ve
www. basementarcade. com OL AS BIOS
When clearing, bring “-*” to “YES” and when not clearing, to "NO", by using the SERVICE SW, and then push the TEST button.
When clearing has been finished, “COMPLETED” will be displayed.
Pressing the TEST button will have the MENU return on to the screen.
- TGP TEST
In this test, the TGP (the on-screen display related IC) is checked. “GOOD” is displayed for normal ICs. “BAD” is displayed for abnormal ICs.
TGP TEST
ic 47 good good ic 56 good good ic 60 good good ic 64 good good
Five seconds after test is started, pressing the TEST button causes the MENU to return on to the screen.
- ALL INITIALIZE
ALL INITIALIZE
YES (INIT.) + NO {CANCEL)
SELECT BY SERVICE BUTTON AND PUSH TEST BUTTON
In this test mode, all settings are initialized. When initializing, bring the arrow ">" to “YES” and press the test button.
www. basementarcade. com CLASS
- COMPOSITION OF GAME BOARD
/ ey PES I Ww
GAME BOARD No. 833-11341 GAME BD VIRTUA FIGHTER2 1 MAIN BD No. 837-10848 MODEL 2 A-CRX CPU BD COM 2 MAIN BD No. 837-10849-01 MODEL 2 A-CRX VIDEO BD COM 3 ROM BD No. 834-11342 ROM BD VIRTUA FIGHTER2
= “7
wwaw. bosementarcade.com OLAS pena aes
Shield Case Assembly
NO. PART NO. DESCRIPTION CAGE COVER
CPU LOGIC PC
12VDC FAN (92MM, 40 CFM MIN.) FILTER BOARD
CAGE BASE
103 FAN GUARD al Ealwlry|—~
yt a www. basementercade.com CLASSICS
Fluorescent Lamp (VF)
i tt ®
“Fl
ian a Ae
| L e Vv VV ©)
4: the In { oe fl tk as thee eee
NO. PART NO. DESCRIPTION
0005.231-201 #8 X 1/8” BLACK PAN HEAD SCREW 2 0065.037-002 HEADER RETAINER BRACKET 3 COMMONLY 24” FLUORESCENT LAMP (F20 T 12/CW) AVAILABLE
4 COMMONLY STARTER (FS-2 20W)
AVAILABLE
5 999.0353 HEADER MARQUEE GLASS 6 999.0358 MONITOR GLASS 2
assega gr 34 ARCAD www. basementarcade. com CLASSICS
Control Panel (VF)
Typical Switch Assembly
Sa Typical Joystick Ze} Assembly
No. PART NO. DESCRIPTION 1 999-0212 PUSH BUTTON ASSEMBLY (RED) 2 999-0213 START PUSH BUTTON ASSEMBLY (WHITE) 3 0069-006-000 STRIKE BRACKET (2) 4 0007-183-211 CARRIAGE BOLT (4) 5 999-0214 JOYSTICK ASSEMBLY (2) 6 0007-001-111 CARRIAGE BOLT (8) 3 7 999-0356 LEXAN OVERLAY
Aheave www. basementarcade. com O84 AS BIGS
Switch Bracket Assembly
@
ON VY (S) va
eae Volume @~| Test Coin
Service Degauss (6)
Q nO)
NO. PART NO. DESCRIPTION 5K VOLUME POT BRACKET COIN METER (6VDC, NO DIODE, NO LIGHT) |
PUSH BUTTON SWITCH 3A PUSH BUTTON SWITCH aflala fw lr ]— LABEL
www. bazementarcade. com guasares
Sound Board
No. PART NO. DESCRIPTION
838-10018 AUDIO AMP PC
www. basementarcade.com 0
Bill Board Assy
Bill Board (PN 999-0359) YN Fear -_ @
can www. besementarcade.com CLAS s7c8
Power Unit Assembly
Oo fF
as @- NZ @- = peas
) 6 ®% O©@ NO. PART NO. DESCRIPTION 1 COMMUTATION BRACKET (4) 2 TABEL
3 WOOD BASE
A 999.0102 1SOW POWER SUPPLY
999-0205 TRANSFORMER 437P30A 5 999-0357 TRANSFORMER 437P-41 ALTERNATE
6 LINE FILTER
z FUSE LABEL : 8 FUSE HOLDER
108 FUSE SA
ARCA é
www. basementarcade. com O04 AD 3
Wire Color Code Table
The Wire Color Code is as follows:
A Pink B Sky Blue ¢c Brown D Purple E light Green
Wires other than those of any of the above 5 single colors will be displayed by 2 alphanumeric characters:
Red Blue Yellow Green White Orange Black Gray OMNUKRwWH>
If the righthand side numeral of the code is 0, then the wire will be of a single color shown by the left. hand side numeral {see list above).
Ifthe righthand side alphanumeric ie not 0, that particular wire has @ spiral color code. The lef-hand side character shows the base color and the righthand side one shows the spiral color.
Example — ‘51’ = WHITE/RED CGT | RED WHITE
The character following the wire color code indicates the size of the wire:
K AWG 18 UL 1015 L AWG20- UL 100/ None AWG22_ UL 1007
Lt wow, barementareade. com CLAS BSICL
ane ‘ayo 1 1 ' ' [© ‘ j———-_—_-—_€) 1 ° 2) awis ‘i ‘ (we) auavas ; po {+—_—_——_———-©) ee (ev) HO : a Ww) anon : |-—-_—_—-© |——_—___6) % (goh4ar1 ' rn (ous 1 e /—— 2 t} e¢ /-——————o ' z | (oer ‘yz [s @an ‘ pei Sh 11S aime SP | we OG iz (nance : e (ennmoa | ase Cte |_____€) |——_—_©
1 t sugavaH a (62) HON ' ez) HONNa : susan o oxen 2 os) 8 oon 2 os) | pe 6 po SS ey (6) aN ' [aso asnaazo '
‘ 4 ' anon 4 ' aan 1 : f os 1 , er ' : 1 ' sess ekeseteseeesea mes ' peep eneegneeseseeeseead? 7
n ‘aNe ‘avo |} Nv l : Ger nico nzvo0_ {| ['09) Eyes] nasesenssasuuasentey=¢ Tow B [+ Goaomes |___© . east act
Tr]! £00%t - coor Ns eweD Wo Gueuna GBS {eget tensa pas ame eoesas en foaenn Pe z 6 fy waLaMNIOD
avrasio ow ne Mees sss Blais
> ZENO ‘ENO “ENO
eo [Woon NdO NIV = [le ownw
Oo eon @ wownv
‘NS OUD UO Amid CASA viede1 10) souuojsues, weweNy a sewsovi o4, Bui ewed LHOIddN
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.