Initial D 2 DLX
Initial D Ver.2 (SEGA, 2003) · Manual · 114 pages · 62 sections · original scan
1ST PRINTING May ‘03
Version 2 Deluxe
Owner’s Manual
SEGA ENTERPRISES, INC. USA
MANUAL NO. 999-1799 Game Code: TOT
VISIT OUR WEBSITE!
O-} ¢ SegaService.com
Back Forvard Stop Refresh Home AutoFill Print Mail
Live Horne Page SegaServbe.com App Apple Support Appk Store @ Mac a6 x Mierosoft MacTopis MSN My Exeite ie SEGA
SERVICE
*"Bultetins “Dari's Office = Game Manuals "“Searen "What's New Need Parts for old Sega Games:
If you have any questions or comments about this site please E-Mail to Darl. Davidsoni@seu. \. 4OD)
Service Department phone 416.701.6580 1ax418.701,8594 abe,
[what's new] [manuals] [bulletins] [assemblies] [Search] [staff] [Dar!'s office] [technical service] [warranty] [corporate info] [plugins] [Non-framed page]
You will need the following items to view this page in its entirety.
All Platforms Windows — Macintosh
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety:
To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. Be sure to keep this manual nearby the product or elsewhere convenient for referring to it when necessary.
Herein, explanations which require special attention are enclosed with dual lines. Depending on the potentially hazardous degrees, the terms of WARNING, CAUTION, ete. are used. Be sure to understand the contents of the displays before reading the text.
Indicates that mishandling the prod- Indicates that mishandling the product uct by disregarding this warning by disregarding this caution will cause will cause a potentially hazardous a slight hazardous situation which can
For the safe usage of the product, the following pictographs are used:
this display is attached to places where the Owner’s Manual and or Service Manual should
( Indicates “HANDLE WITH CARE.” In order to protect the human body an equipment,
be referred to.
© Perform work in accordance with the instructions herein stated. Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to perform work as per the instructions can cause accidents. In the case where only those who have technical expertise should perform the work to avoid hazardous situation, the instructions herein state that the serviceman should perform such work.
© Be sure to turn off power before working on the machine. To prevent electric shock, be sure to turn off power before starting the work in which the worker touches the interior of the product. If the work is to be performed in the power-on status, the Instruction Manual herein always states to that effect.
© Be sure to ground the Earth Terminal (this, however, is not required in the case where a power cord with earth is used). This product is equipped with the Earth Terminal. When installing the product, Connect the Earth Terminal to the “accurately grounded indoor earth terminal” by using an earth wire. Unless the product is grounded appropriately, the user can be subject to electric shock. After performing repair, etc. for the Control equipment, ensure that the Earth Wire is firmly connected to the Control equipment.
© Ensure that the Power Supply used is equipped with an Earth Leakage Breaker. This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.
© Be sure to use fuses which meet the specified rating. (only for the machines which use fuses). Using fuses exceeding the specified rating can cause a fire and electric shock.
© Specification changes (removal of equipment, conversion and addition) not designated by SEGA are not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazardous to operate the product by removing parts and or modifying the circuits. Should doors, lids and protective parts be damaged or lost, refrain from operating the product, and contact where the product was purchased from or the office herein stated. SEGA shall not be held responsible for any accidents, compensation for damage to a third party, resulting from the specifications not designated by SEGA. © Ensure that the product meets the requirements of appropriate Electrical Specifications. Before installing the product, check for Electrical Specifications. SEGA products have a nameplate on which Electrical Specifications are described. Ensure that the product is compatible with the power supply voltage and frequency requirements of the location. Using any Electrical Specifications different from the designated Specifications can cause a fire and electric shock. © _ Install and operate the product in places where appropriate lighting is available, allowing warning labels to be clearly read. To ensure safety for the customers, labels and printed instructions describing potentially hazardous situation are applied to places where accidents can be caused. Ensure that where the product is operated has sufficient lighting allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please place an order with where the product was purchased from or the office herein stated. © When handling the Monitor, be very careful. (Applies only to the product w/monitor.) Some of the monitor (TV) parts are subject to high tension voltage. Even after running off power, some portions are still subject to high tension voltage sometimes. Monitor repair and replacement should be performed only be those technical personnel who have knowledge of electricity and technical expertise. © _ Besure to adjust the monitor (projector) properly. (Applies only to the product w/monitor.) Do not operate the product leaving on-screen flickering or blurring as it is. Using the product with the monitor not properly adjusted may cause dizziness or a headache to an operator, a player, or the customers. © When transporting or reselling this product, be sure to attach this manual to the product. In the case where commercially available monitors and printers are used in this product, only the contents relating to this product are explained herein. Some commercially available equipment has functions and reactions not stated in this manual. Read this manual together with the specific Instruction Manual of such equipment.
° Descriptions herein contained may be subject to improvement changes without notice.
- The contents described herein are fully prepared with due care. However, should any question arise or errors be found, please contact SEGA.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION.
Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after transporting to the location. Nevertheless, an irregular situation may occur during transportation. Before turning on power, check the following points to ensure that the product has been transported in a satisfactory status. Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet? Are Casters and Adjusters, damaged? Do the power supply voltage and frequency requirements meet with those of the location? Are all wiring connectors correctly and securely connected? Unless connected in the correct direction, connector connections can not be made accurately. Do not insert connectors forcibly. Do power cords have cuts and dents? Do the fuses used meet specified rating? Is the Circuit Protector in an energized status? Are all accessories available? Can all Doors and Lids be opened with the Accessory keys? Can Doors and Lids be firmly closed?
TABLE OF CONTENTS
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS
INTRODUCTION OF THE OWNER’S MANUAL
- HANDLING PRECAUTIONS .... se
- PRECAUTIONS CONCERNING INSTALLATION LOCATION
- OPERATION ....
4.
5. . NAME OF PARTS
. ACCESSORIES ...
- ASSEMBLING AND INSTALLATION
- CARD READER/WRITER
- PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE
- GAME DESCRIPTION .
- EXPLANATION OF TEST AND DATA DISPLAY
- CONTROL PANEL (ASSY HANDLE MECHA
- SPEED SHIFTER (SHIFT LEVER).
- ACCEL & BRAKE
- COIN SELECTOR .
- PERIODIC INSPECTION TABLE
- TROUBLESHOOTING ...
- GAME BOARD
- COMMUNICATION PLAY
- MONITOR
- DESIGN RELATED PARTS
- PARTS LIST...
- WIRE COLOR CODE TABLE
WIRING DIAGRAM ... 1-2
3-4
5-8
10-12 13 - 22 23 - 26 27-28
29-42 43 - 62 63 - 66
68 - 69 70-71
72-73 74 - 80 81-83
85 - 87
89-101
XXX
SPECIFICATIONS Installation Space : 44 inches width X 76 inches deep Height : 64.75 inches Width : 36 inches Length : 68 inches Weight : 550 Ibs Power, maximum current : 1200 W 10A (AC 120V 60 Hz AREA)
MONITOR : 40in. 4:3 Plasma Supplied by Zenith Model# P40V22
INTRODUCTION OF THE OWNERS MANUAL
This Owner's Manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of electronic assemblies, electromechanicals, servicing control, spare parts, etc. as regards the product, SEGA INITIAL “D” VER.2 DELUXE. This manual is intended for the owners, personnel and managers in charge of operation of the product. Operate the product after carefully reading and sufficiently understanding the instructions. Ifthe product fails to function satisfactorily, non-technical personnel should under no circumstances touch the internal system. Please contact where the product was purchased from.
Use of this product is unlikely to cause physical injuries or damages to property. However, where special attention is required this is indicated by a thick line, the word "IMPORTANT" and its sign in this manual.
Indicates that mishandling the product by disregarding this display can cause the product's intrinsic performance not to be obtained, resulting in malfunctioning.
IMPORTANT!
SEGA AMUSEMENTS USA, INC./CUSTOMER SERVICE 45133 Industrial Drive, Fremont, California 94538, U.S.A. Phone : (415) 701-6580 Fax : (415) 701-6594
DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN
Non-technical personnel who do not have technical knowledge and expertise should refrain from performing such work that this manual requires the location's main-
Ensure that parts replacement, servicing & inspections, and troubleshooting are performed by the location's maintenance man or the serviceman. It is instructed herein that particularly hazardous work should be performed by the serviceman who has technical expertise and knowledge.
The location's maintenance man and serviceman are herein defined as follows:
"Location's Maintenance Man" : Those who have experience in the maintenance of amusement equipment and vending machines, etc., and also participate in the servicing and control of the equipment through such routine work as equipment assembly and installation, servicing and inspections, replacement of units and consumables, etc. within the Amusement Facilities and or locations under the management of the Owner and Owner's Operators of the product.
Activities of Location's Maintenance Man : Assembly & installation, servicing & inspections, and replacement of units & consumables as regards amusement equipment, vending machines, etc.
Serviceman : Those who participate in the designing, manufacturing, inspections and maintenance service of the equipment at an amusement equipment manufacturer. Those who have technical expertise equivalent to that of technical high school graduates as regards electricity, electronics and or mechanical engineering, and daily take part in the servicing & control and repair of amusement equipment.
Serviceman's Activities : Assembly & installation and repair & adjustments of electrical, electronic and mechanical parts of amusement equipment and vending machines.
LISTED
5K92 ®
AMUSEMENT MACHINE
Notes:
- HANDLING PRECAUTIONS
A\
WARNING!
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine.
Before performing work, be sure to turn power off. Performing the work without turning power off can cause an electric shock or short circuit. In the case work should be performed in the status of power on, this manual always states to that effect. To avoid electric shock or short circuit, do not plug in or unplug quickly. To avoid electric shock, do not plug in or unplug with a wet hand. Do not expose Power Cords and Earth Wires on the surface, (floor, passage, etc.). If exposed, the Power Cords and Earth Wires are susceptible to damage. Damaged cords and wires can cause electric shock or short circuit. To avoid causing a fire or electric shock, do not put things on or damage Power Cords. When or after installing the product, do not unnecessarily pull the power cord. If damaged, the power cord can cause a fire or electric shock. In case the power cord is damaged, ask for replacement through where the product was purchased from or the office herein stated. Using the cord as is damaged can cause fire, electric shock or leakage. Be sure to perform grounding appropriately. Inappropriate grounding can cause an electric shock. Be sure to use fuses meeting specified rating. Using fuses exceeding the specified rating can cause a fire or electric shock. Completely make connector connections for IC BD and others. Insufficient insertion can cause an electric shock. Specification changes, removal of equipment, conversion and/or addition, not designated by SEGA are not permitted. Failure to observe this may cause a fire or an electric shock. Non-compliance with this instruction can have a bad influence upon physical conditions of the players or the lookers-on, or result in injury during play. SEGA shall not be held responsible for damage, compensation for damage to a third party, caused by specification changes not designated by SEGA. Be sure to perform periodic maintenance inspections herein stated.
(10?) @ For the IC board circuit inspections, only the logic tester is allowed. The use of a multiple-purpose tester is not permitted, so be careful in this regard.
@ PRODUCTION DATE #
This SEGA product was produced in the month and year of:
May/2003
This signifies that this work was disclosed in 2003.
- PRECAUTIONS CONCERNING INSTALLATION LOCATION
A\
WARNING!
This product is an indoor game machine. Do not install it outside. Even indoors, avoid installing in places mentioned below so as not to cause a fire, electric shock, injury and or malfunctioning.
P pr P the proximity of an indoor swimming pool and or shower, etc.
chemicals or hazardous matter. sty places.
icinity of anti-disaster facilities such as fire exits and fire extinguishers. aces subject to rain or water leakage, or places subject to high humidity in
aces subject to direct sunlight, or places subject to high temperatures in the oximity of heating units, etc. aces filled with inflammable gas or vicinity of highly inflammable/volatile
oped surfaces. aces subject to any type of violent impact.
e operating (ambient) temperature range is from 5°C to 30°C.
LIMITATIONS OF USAGE REQUIREMENTS
A\
Be sure to check the Electrical Specifications. Ensure that this product is compatible with the location's power supply, voltage and frequency requirements. A N shock. This product requires the Breaker and Earth Mechanisms as part of the location facilities. Using them in a manner not independent can cause a fire and electric shock. Ensure that the indoor wiring for the power supply is rated at 15 A or higher (AC single phase 100 ~ 120 V area). Non-compliance with the Electrical Specifications can cause a fire and electric shock. B age Breaker. Using a power supply without the Earth Leakage Breaker can cause an outbreak of fire when earth leakage occurs. Putting many loads on one electrical outlet can cause generation of heat and a fire resulting from overload. When using an extension cord, ensure that the cord is rated at 15 A or higher (AC 100 ~ 120 V area). Using a cord rated lower than the specified rating can cause a fire and electric shock. plate describing Electrical Specifications is attached to the product. on-compliance with the Electrical Specifications can cause a fire and electric
e sure to independently use the power supply equipped with the Earth Leak-
Operation Area
A
WARNING!
@
IMPORTANT!
@ For the operation of this machine, secure a minimum area of 44 in. (W)x76 in. (D). In order to prevent injury resulting from the falling down accident during game play, be sure to secure the minimum area for operation. @ Be sure to provide sufficient space so as to allow this product's ventilation fan to function efficiently. To avoid machine malfunctioning and a fire, do not place any obstacles near the ventilation opening. SEGA shall not be held responsible for damage, compensation for damage to a third party, resulting from the failure to observe this instruction.
-— Electric current consumption —
MAX. 10 A (AC 120 V 60 Hz) For transporting the machine into the location's building, the minimum necessary dimensions of the opening (of doors, etc.) are 38 in. (W) and 66 in. (H).
444i,
2in,
Tp way
W9L
Sin, over
FIG. 2
- OPERATION
PRECAUTIONS TO BE DED BEFORE STARTING THE OPERATION
A\
WARNING!
To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players.
playing the game to te
the Cabinet can move In order to avoid accidents, check the following before starting the operation: @ To ensure maximum safety for the players and the customers, ensure that where the product is operated has sufficient lighting to allow any warnings to be read. Operation under insufficient lighting can cause bodily contact with each other, hitting accident, and or trouble between customers. Be sure to perform appropriate adjustment of the monitor (projector). For operation of this machine, do not leave monitor's flickering or deviation as is. Failure to observe this can have a bad influence upon the players' or the customers' physical conditions. It is suggested to ensure a space allowing the players who feel sick while ea rest. Check if all of the adjusters are in contact with the surface. If they are not, and cause an accident.
Ensure that all of the Adjusters are in contact with the floor.
Do not put any heavy item on this product. Placing any heavy item on the product can cause a falling down accident or parts damage.
tially crowded situation at the installation location. Insufficient installation
PRECAUTIONS TO BE HEEDED DURING OPERATION (PAYING ATTENTION TO CUSTOMERS)
To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players.
man To avoid injury and accidents, those who fall under the following categories
= - are not allowed to play the game.
A\
WARNING!
A
@ This product is intended for 1 Player only per seat. Playing the game by 2 or more Players riding on the seat together can cause falling down and collision accidents by striking head, hand, or elbow.
@Caution the player so as not to hold a child in her/his lap to play. Failure to observe this may cause the child to be caught between the Control Panel and the player and fall down.
Immediately stop such violent acts as hitting and kicking the product. Such violent acts can cause parts damage or falling down, resulting in injury due to fragments and falling down. Instruct the Player to adjust the seat before playing the game. Playing the game in a forcible posture can cause a contingent accident.
7 www.
euservice.com
PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION (CARD SYSTEM)
(0?) When an unjust act is performed, no written data is backed up mechanically. The following acts may be judged to be unjust acts.
If the card reader/writer has not been set as being unused, you will be unable to select any game mode with use of cards while the game will be in progress. Thus, for the card reader/writer, deal with the player, paying attention to the following points:
Even if the player requests the system for use of cards when you have set the machine so that the card reader/writer is not used, the request is rejected.
/ARNING: HAZARD TO EPILEPTICS. @ A very small portion of the population has a condition which may cause them
- ' viewing certain kinds of flashing lights or patterns that are present in our daily environment. These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition. If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g., seizures or loss of awareness), immediately consult your physician before using any video games. We recommend that parents observe their children while they play video games. If you or your child experience the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, DISCONTINUE USE IMMEDIATELY and consult your physician.
- NAME OF PARTS
42 IN Plasma Screen
Control Panel
Shift Lever
Coin/Cashbox Door
Accelerator & Brake
Main Base
TABLE 4 Dimensions and Weights | Width x Length x Height | Weight When assembled 36in x 68in x 64.75in 550 LBS
- ACCESSORIES
When transporting the machine, make sure that the following parts are supplied. Magnetic cards for the recording of play results, and cleaning kits for cleaning the head of the card reader/writer are sold separately. Subsequent purchases of these items can be made by contacting the office listed on this Owner's Manual or the dealer from whom the product was originally purchased. Be sure to provide the part number(s), name(s), and required number of items.
@ Cleaning Kit 601-11050 CLEANING CARD: Package of 30 sheets @ Magnetic Cards 601-11136-01 CARD PACKAGE TOF ENG: Package of 200 Magnetic Cards TABLE 5 a ACCESSORIES
DESCRIPTION Part No. (Qty.) Notes OWNER'S MANUAL 999-XXXX
Figures Parts not labeled with part numbers are as yet unregistered or cannot be registered. Be sure to handle all parts with care, as some parts are not available for purchase separately.
NAOMI NETWORK SYSTEM SERVICE MANUAL 420-6660-01 (1) Instruction Manual for the Game Board
CLEANING CARD 601-11050 (1) For the periodic maintenance. See Sections 7 and 10. (30 sheets of Cleaning Card)
CARD PACKAGE TOF ENG. 601-11237-01 (1) Cards for card reader/writer
*Picture not available at this time. KEY MASTER 9301A (2) For openin the doors KEY (2) ng/closing For the CASHBOX DOOR
The Keys are inside the Coin Chute Door at the time of shipment from the factory.
TAMPERPROOF WRENCH T-27 Torx 1/4-20 (1) T-25 Torx 10/32 (1) T-20 Torx M4 (1) T-15 Torx 8/32 (1) T-10 Torx (1) Tool
The following Table 5b lists the parts that are separately marketed but are necessary when booting this product's software. When having unpacked the shipping crate, make sure that all the parts in this Table 5b are in the crate. If not so, contact where you have obtained the product.
TABLE 5 b (XKT-0833 : GD-ROM DRIVE KIT)
GD-ROM DRIVE GD-ROM DRIVE CARTON BOX XKT-0833 qd) Device that loads the software in a GD-ROM disc. Used for transporting the GD-ROM DRIVE. See FIG. 5 b.
This carton box is a standard accessory of the GD-ROM drive.
TABLE 5c
GD ROM KIT TOT CUSHION SPONGE 601-11137 (1) GD-ROM Disc Protector
KEY CHIP (1)
STICKER 422-0015B hield Case Sticker
NAOMI2 GDROM TOT ENG 610-0625-0027 (1)
HOW TO USE THE CARTON BOX (GD-ROM DRIVE)
When you want to order for replacing or repairing service of the GD-ROM drive that is used by the product, pack it in a carton box as instructed below, , ] and then deliver the carton box to a service agent. If you do not observe the
- ASSEMBLING AND INSTALLATION
AN
WARNING!
A
CAUTION!
Perform assembly work by following the procedure herein stated. Failing to comply with the instructions can cause electric shock hazard. Perform assembling as per this manual. Since this is a complex machine, erroneous assembling can cause an electric shock, machine damage and or not functioning as per specified performance. When assembling, be sure to use plural persons. Depending on the assembly work, there are some cases in which working by one person alone can cause personal injury or parts damage. Ensure that connectors are accurately connected. Incomplete connections can cause electric shock hazard. Be careful not to damage the wires. Damaged wires may cause electric shock or short circuit or present a fire risk. This work should be performed by the Location's Maintenance Man or Serviceman. Performing work by non-technical personnel can cause a severe accident such as electric shock. Failing to comply with this instruction can cause a severe accident such as electric shock to the player during operation. Provide sufficient space so that assembling can be performed. Performing work in places with narrow space or low ceiling may cause an accident and assembly work to be difficult. To perform work safely and avoid serious accident such as the cabinet's falling down, do not perform work in places where step-like grade differences, a ditch, or slope exist.
Handle molded parts with care. Undue weight or pressure may cause them to break and the broken pieces may cause injury. To perform work safely and securely, be sure to prepare a step which is in a secure and stable condition. Performing work without using the step can cause violent falling down accidents. Make sure that the GD cable connector is inserted parallel to the plug. Improper insertion may cause damage to the connector and present a fire risk.
When carrying out the assembling and installation, follow the following 6-item sequence. 1 | SECURING IN PLACE(ADJUSTER ADJUSTMENT)
POWER SUPPLY, AND EARTH CONNECTION [2]
3 | TURNING POWER ON 4 | ASSEMBLING CHECK
Tools such as a Phillips type screwdriver, wrench, socket wrench and Ratchet Handle are required for the assembly work.
Phillips type screwdriver SOCKET WRENCH.RATCHET HANDLE
1 SECURING IN PLACE (ADJUSTER ADJUSTMENT)
AN Make sure that all of the adjusters are in contact with the floor. If they are not, the
This product has 8 casters and 8 Adjusters. (FIG. 6. 2 a) When the installation position is determined, cause the adjusters to come into contact with the floor directly, make adjustments in a manner so that the casters will be raised approximately 5 mm from the floor and make sure that the machine position is level.
ADJUSTER @ Transport the product to the ue installation position.
@ Have all of the Adjusters make contact with the floor. Adjust the Adjuster's height by using a wrench so that the machine position is kept level.
@ After making adjustment, fasten the Adjuster Nut upward and secure the height of Adjuster. CASTER
FIG. 6. 2a BOTTOM VIEW
- Note:Picture may differ from actual unit.
ADJUSTER a a
FASTEN UPWARD. (a i \ _ ADJUSTER t
FIG. 6.2 b ADJUSTER Approx. 5mm
44 in,
8 in. over 2 in.
<=
FIG. 6.2¢ Provide ventilation space for the ventilation opening. Allow more than 28 in. of space for customer traffic. “Wig “xoudde qua,
W9L
2 POWER SUPPLY, AND EARTH CONNECTION
A\
WARNING!
Be sure to independently use the power supply socket outlet equipped with an Earth Leakage Breaker. Using a power supply without an Earth Leakage Breaker can cause a fire when electric leakage occurs. Ensure that the "accurately grounded indoor earth terminal" and the earth wire cable are available (except in the case where a power cord plug with earth is used). Connect the earth terminal and the indoor earth terminal with the prepared cable. If the grounding work is not performed appropriately, customers can be subjected to an electric shock, and the product's functioning may not be stable. Ensure that the power cord and earth wire are not exposed on the surface (passage, etc.). If exposed, they can be caught and are susceptible to damage. If damaged, the cord and wire can cause electric shock and short circuit accidents. Ensure that the wiring position is not in the customer's passage way or the wiring has protective covering. After wiring power cord on the floor, be sure to protect the power cord. Exposed power cord is susceptible to damage and causes an electric shock accident.
The AC Unit is located the back of the Cabinet. The AC Unit has Main SW and the Inlet which connects the Power Cord.
@ Ensure that the Main SW is OFF. <-->
\ Q
Main SW off o oO
MAIN SW }
| INLET
FIG. 6.4. AC unit
- Note: Actual Power Supply connection may vary from photo
AC Cable (Power Cord)
3 TURNING POWER ON
Turn on the AC unit's main switch to supply power to the unit. Once power is turned on, the fluorescent lamp lights up. The Start System Screen displays after a lapse of several seconds. It is followed by the screen that indicates that the network is currently being checked if the communication mode has been set. If there is a bad or improper communication connection, each screen will not proceed to the next, remaining on the currently Network Check Screen. If this occurs, resolve the error according to the instructions in this document.
If the communication mode has not been set or the communication check ends normally, the Motor Check Screen returns. While the Motor Check Screen is on-screen, the steering wheel can move either clockwise or counterclockwise. If you touch the wheel, the motor check is hindered and the game will not operate normally. So, you must not touch it at this time. Failures are displayed, if found. Resolve the errors according to the instructions in this document.
Once all the above steps have been completed, the Advertise Screen displays and voices are output through the left and right loudspeakers, unless you have set the machine so that no voices are output during the Advertise mode.
This product retains the number of credits and the ranking data even after the power is turned off. It does not retain data about the fractional number of coins (i.e., the number of coins not reaching one credit) or the bonus adder count.
Fluorescent lamps are always lit.
On-screen images are outputted.
- Note: Picture may differ from actual unit.
FIG. 6.5
Each Check Screen is followed as below.
Network Check Screen
CHECKING NETWORK NOW
Card Reader/Writer Check Screen
CARD R/W INITIALIZE... }+——> @When Card is left in the Card Reader/Writer;
PLEASE GET CARD
Motor Check Screen @ Remove the card. Screen does not change until the
KICKBACK INITIALIZE... card is removed.
|__» @When cleaning is required;
PLEASE INSERT CLEANING CARD.
@ Steering wheel will turn. Do not touch it.
Insert the cleaning card. (See 7-2 HEAD CLEANING.)
4 | ASSEMBLING CHECK
In the TEST MODE, ascertain that the assembly has been made correctly and IC BD. is satisfactory (refer to Section 10). In the test mode, perform the following test:
(1)MEMORY TEST
Selecting the RAM TEST on the system test mode menu screen causes the on-board memory to be tested automatically. The game board is satisfactory if the display beside each IC No. shows GOOD.
RAM TEST
1C29 GOOD 1C35 GOOD IC0O9 GOOD IC10 GOOD IC11 GOOD IC12 GOOD IC16 GOOD IC18 GOOD IC20 GOOD IC22 GOOD IC17 GOOD IC19 GOOD IC21 GOOD 1C23 GOOD 1C106 GOOD IC107 GOOD 1C108 GOOD IC109 GOOD IC111 GOOD IC113 GOOD IC115 GOOD 1IC117 GOOD IC112 GOOD 1IC114 GOOD IC116 GOOD IC118 GOOD
PRESS TEST BUTTON TO EXIT
DIMM BOARD TEST
PROGRAM VER: *** DIMM SLOTO : GOOD DIMM SLOT 1. : GOOD DIMM STATUS: : GOOD
CHECKING DIMM BD DIMMO - GOOD DIMM1 - GOOD 1C34,35S = -GOOD 1C10,11S |= -GOOD GD DRIVE - GOOD COMPLETED -.
PRESS TEST BUTTON TO EXIT
(2)SOUND TEST
OUND TEST In the system test mode, selecting SOUND TEST causes the screen (on which sound RIGHT SPEAKER OFF related BD and wiring connections are tested) to be displayed. Check if the sound sfactorily emitted -> EXIT from each speaker and the sound volume is appropriate. LEFT SPEAKER OFF
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
(3)C.R.T. TEST
In the system test mode menu, selecting C.R.T. TEST allows the screen (on which the monitor is tested) to be displayed. Although the monitor adjustments have been made at the time of shipment from the factory, color deviation, etc., may occur due to the effect caused by geomagnetism, the location building's steel frames and other game machines in the periphery. By watching the system test mode screen, make judgment as to whether an adjustment is needed. If it is necessary, adjust the monitor by referring to Chapter 15.
SYSTEM TEST MODE
. TEST 2/2
RED
GREEN
BLUE
WHITE
PRESS TEST BUTTON TO CONTINUE BUTTON TO EXIT
- Note: Screen shows a grid.
(4)INPUT TEST
GAME TEST MODE
INPUT TEST
STEERING XXH ACCEL XXH BRAKE XXH GEAR POSITION N START OFF CHANGE VIEW OFF SERVICE OFF TEST OFF
PRESS TEST AND SERVICE BUTTON TO EXIT
(S)OUTPUT TEST
GAME TEST MODE
OUTPUT TEST
->START BUTTON CHANGE VIEW BUTTON
PRESS TEST BUTTON TO EXIT Selecting the INPUT TEST on the game test mode menu screen causes the screen (on which each switch is tested) to be displayed. Press each switch. If the display beside each switch indicates "ON," the switch and wiring connections are satisfactory.
Select OUTPUT TEST from the Menu screen in the Game Test Mode to cause the screen (on which output unit such as lamps and wiring connections are tested) to appear. Ensure that the output unit functions satisfactorily.
Perform the above inspections also at the time of monthly inspection.
- CARD READER/WRITER
7-1 SETTING DEDICATED CARDS
@
IMPORTANT!
Be sure to use dedicated cards available for this product. Use of ones other than such dedicated cards may cause a malfunction or failure of the machine. Be sure to set the specified number of card in the specified orientation by using the specified procedure. Wrong setting of the cards may cause the machine to fail. This machine allows you to set up to 100 cards at a time. You must not set over 101 cards at a time. If you do so, a trouble such as card jamming may occur. Set virgin cards taken out from a container that was unpacked immediately before use. Use of any deformed or deteriorated card may cause a trouble. Do not include a corrugated, bent, or used card in the card deck.
When the unit is out of cards, a message will be displayed at the upper right of the screen during advertisements. Follow the instructions below to restock the system with cards. Cards may be stocked when the unit is on or off. After restocking the system with cards, the message displayed after the "SEGA" logo will be updated. Gameplay can be resumed without waiting for the updated message.
Unlock and open the cover to find the card reader/writer. The dispenser on which you should place the cards is located at the rear of the reader/writer.
@ From the card reader/writer, take out the dispenser upward in a straight line.
Unlock
- Note: Pictures may differ from actual Unit.
@ Remove the cover from the back of the dispenser.
Be careful of instructions of the sticker.
Remove the dispenser's cover. Be sure to set the cards orientation Close the cover, and reinstall the dispenser.
FIG. 7. la
@ Place the cards into the dispenser according to the instructions on the sticker annexed to the dispenser. Refer to the diagram shown on the sticker attached to the Dispenser and insert the cards into the Dispenser. Be careful not to insert the cards in the wrong direction or with the wrong side facing up. The Dispenser can only hold 100 cards. Do not attempt to insert more than 100 cards. Too many cards may cause the Dispenser to jam or result in other problems. Insert magnetic cards into the Dispenser in complete packs of 100 or after carefully counting the number of cards (not to exceed 100).
Load cards in the correct orientation.
This side up.
FIG. 7. 1b
@ Reinstall the cover to the dispenser.
@ Insert the dispenser into the card reader/writer. The dispenser can be inserted only in the predetermined orientation.
@ Close and lock the cover.
7-2 HEAD CLEANING
IMPORTANT!
The unit enters Head Cleaning Mode when any of the following conditions are met: At power-up if the Card Reader/Writer has operated 100 times or more At power-up if the date has been updated At boot time after performing Backup Data Clear Once the unit enters Head Cleaning Mode, follow the on-screen instructions and perform Head Cleaning. The unit will not exit Cleaning Mode (i.e. games may not be played) until head cleaning is complete. Always use the designated Cleaning Card. Using anything other than the designated card or carrying out any other procedure other than the one outlined in the manual may cause faulty printing, faulty operation and/or unit failure. Cleaning Cards may only be used once. Dispose of them after use. Cleaning Cards should be used immediately after removal from the package. Cleaning Cards will not clean effectively if dried out. Perform head cleaning only when there are cards in the Card Reader/Writer Dispenser. If the Dispenser is empty, the part that secures the cards inside the Dispenser may touch the rotating part of the Card Reader/Writer and cause noise. Always remember to remove the Cleaning Card after completing head cleaning. After head cleaning, wait for the "SEGA LOGO" to be displayed at least twice before resuming gameplay.
This machine records the number of times the Card Reader/Writer is used. The Card Reader/Writer writes data to and reads data from cards. Each write and read is counted, so the Card Reader/Writer usage count will not be the same as the number of times the game is played. Once head cleaning of the Card Reader/Writer is complete, the unit will exit this mode. Follow the on-screen instructions to carry out cleaning. CLEANING CARD
PLEASE INSERT CLEANING CARD.
Insert the Cleaning Card into the card slot. v
NOW CLEANING...
Indicates that the unit is undergoing cleaning. Wait for cleaning to be completed. v The unit exits to normal mode after cleaning is complete. Do not forget to remove the Cleaning Card. Wait for the "SEGA LOGO" to be displayed at least twice before Photo may differ from actual product. resuming gameplay after cleaning. PHOTO 7. 2 The Card Reader/Writer usage count described above is reset when cleaning is performed. Manual head cleaning may also be performed from Test Mode. Refer to Test Mode <10-3G> for more details.
7-3, CLEARING CARD JAMS
gameplay can be restored, exercise extreme caution. Machine parts may move unexpectedly when the power is ON. This may result in fingers being caught or
(r0?) When attempting to perform this operation without powering down so that
Ifa trouble such as card jamming occurs on the card reader/writer, you are notified of the trouble on the screen. You cannot proceed to a play unless you resolve the trouble at this time. First identify the trouble before you begin to take action. An error message is displayed at the top of the screen when cards become jammed. Use the RESTORE command (hold down the Start button + Change View button for a long time) to retry the function that caused the error. If repeated attempts continue to generate errors, follow the instructions below to remove the card. Removing the card may force the game to shut down. If the game shuts down, existing customer game data will not be saved.
@ Unlock and open the cover.
@ Unlock the hatch by drawing the green shaft attached to the top cover on the card reader/writer. While drawing the shaft, open the cover up.
@ Remove the card jammed in the card reader/writer.
@ While drawing the shaft, close the cover. With the top cover closed, release the green shaft. Check that the top cover has been locked securely.
- Note: Unit may differ from Photo.
PHOTO 7.3 b
@ Close and lock the cover. Remove the card jammed.
- PRECAUTIONS WHEN MOVING THE MACHINE
A\
WARNING!
AN
CAUTION!
When moving the machine, be sure to unplug the power plug. Moving the machine with the plug as is inserted can damage the power cord and cause fire and electric shock hazards. When moving the machine on the floor, retract the Adjusters and ensure that Casters make contact with the floor. During transportation, pay careful attention so that Casters do not tread power cords and earth wires. Damaging the power cords can cause electric shock and short circuit hazards. Do not push the cabinet from the left/right when attempting to move the unit. Pushing from the sides may cause the unit to tip and result in injury and damage to parts.
Do not push on any parts made of glass (e.g. Plasma screen) or plastic, as these parts may break and result in bodily injury.
Do not push the cabinet from the left/right direction.
- Note: Pertains when unit is separated.
- Note: Image differs from actual Unit.
FIG. 8a
In locations with low ceilings, remove the POP and POP Holder /\_, before moving the machine.
Place the machine on casters.
- GAME DESCRIPTION
The following explanations apply to the case the product is functioning satisfactorily. Should there be any moves different from the following contents, some sort of faults may have occurred. Immediately look into the cause of the fault and eliminate the cause thereof to ensure satisfactory operation. When in an advertising state, the screen displays the demonstration pictures and ranking data. Sounds are heard from the speakers on the right and left of the monitor. The advertising sounds are not heard if you have set this function to off (disabled). The start button and the change view button on the control panel are integrated with a lamp. The start button (lamp) flashes when the coins are inserted enough to play the game.
Onscreen Images are Outputed.
Control Panel
Sound is emitted
Coin Inlet
- Note: Unit in Photo may differ from actual Unit.
Game Overview
The game is a car racing game with three different game modes: "Legend of the Streets", "Time Attack" and "The Bunta Challenge!". By connecting two units, you can also enjoy "Network Battle Game" play. The card system allows players to store information such as the car, wins/ loss records and car tune-up status on a special card.
Legend of the Streets
@ Game Content & Rules Battle rival characters man to man on 6 different courses. Each checkpoint you pass adds time to the overall time limit. The first one across the finish line with the allotted time wins. If you run out of time or cross the finish line second, you lose. Once you've defeated all 24 rival characters, you'll get a chance to race against a hidden rival character (final battle/race). Defeat him and you'll race for the title of street legend against the last hidden rival character (special battle/ race). Only when the title is yours will you get to see the ending.
@ INITIAL D CARD Purchasing a card when you start the game creates your car. The card can store all the data for one car. Information on the card includes the player name, car, tune-up status, names of defeated Picarsiarces rival characters, times from Time Attack mode, Network Game Speed Demon Level records, passwords from Time Attack mode and more. i On the Card Screen, the player's name, car name, cleared areas, Key and Speed Demon Level are displayed. The Key is necessary when recording results on the Net Rankings. Speed Demon Level stars (*) increase as various conditions are cleared. INITIAL D CARD Player's name
@ Car Tune-Ups Depending on how well you do, points are added to your card when you use it to play in "Legend of the Streets", "Time Attack", "The Bunta Challenge!" and "Network Battle Race" modes. When you've accumulated enough points, you are given the option of using those points to do tune-ups on your car to increase performance.
@ Game Flow
@ Accept Challenger Screen, Battle Race Select Screen: When network play is disabled, this screen will not appear. For a 1-player game only, select "Refuse Challengers" or "Do Not Enter".
ACCEPT CHALLENGERS FOR BATTLE RACE?, ENTER BATTLE RACE? eed =: US By By
Dm, | YOU CAN ALSO TOGGLE BETWEEN NAME REFUSE CHALLENGERS <> ACCEPT CHALLENGERS consecurive wns BY PRESSING THE START BUTTON. Z TRDED J POINT
Win PERCENTAGE
BATTLE LeveL
@ Card Entry Screen and Card Purchase Screen: Insert your card if you've got one after completing the Card Purchase Screens. If you don't already have a card, you can purchase one.
@ Vehicle Selection Screen: SELECT A MODEL This screen isn't displayed if you've already purchased a card. TOYOTA TRUENO GT-APEX (AE: aRTt
@ Transmission Selection Screen: This screen isn't displayed if you've already purchased a card.
@ Parts Option Selection Screen: If you're purchasing a card, select one of the Parts option. These parts are then attached to your car when you accumulate enough points.
@ Name Entry Screen: If you're purchasing a card, enter your name (driver's name) at the player name input screen. SELECT TRANSMISSION
[ oPTION A J
PARTS MAKER, "PARTS TYPE |} fare |
SELECT
ENTER YOUR NAME
| FGH!I!J | KLMNO | PQRST | |
| Z1234 | 56789 | 0 | |
| = | @ ( | yr? | 5 |
ACL
@ Mode Select Screen: Select "Legend of the Streets" at the Mode Selection Screen. SELECT, GAME MODE
@ Course and Rival Character Selection Screens
SELECT, COURSE
Lust} NORHAL NE HARD I Dh Coed Gor
A STEERING MELE aa
@ Rival Character Scenes
IGGY ; IF YOU'RE INTO IT LET'S RACE,
@ Battle (Race) : a i eo
fa PLAYERS! eg tt PLAYERS AEM TREO) Bg as
IBSi Ss
@ Results Screen
Result
BATILE RESULT wim
TOTAL TIME J 05128
LAP TIME vorrei
ose si
as7 1439
ADVANTAGE 195.4
Point
BATTLEPOINTS qooupr=
WICTORY BONUS 2o0npis
ADVANTAGE BONUS 195pts
PTS. ACQUIRED a195prs
TOTAL POINTS BIBIpts
@ Tune Up Screen: Use your card to play and accumulate points you can put towards performance enhancing tune-ups.
OPTION D. YOUNOWHAVE — SEJE7_TUNINGPONTS
INSTALL WHEELS
NEXT TUNEUP 1 0000pts|
@ Continue Screen: Choose to continue or quit after rival character scenes. If you select "YES", nothing is recorded to the card and you can continue playing. If you select "NO", your game data is stored on your card and your game ends. CONTINUE?
Time Attack
@ Game Content & Rules This is a race against time. The goal is to cross the finish line as quickly as you can. "Direction", "Time of Day" and "Weather" can be selected for each of the six courses - note that on the highest level (Expert 1) time can only be set to Night. Each checkpoint you pass adds time to the overall time limit. When you cross the finish line, a password is displayed. You may use this password to participate in the online Internet rankings.
Four Courses Runaround: A new Time Attack challenge available when the player spends 60000 points from the total saved on their Card. Weather option may be changed. Player races in order through these courses: Akagi (single Downhill), Akina (single Downhill), Happogahara (single Inbound) and Irohazaka (single Downhill).
Your times, when recorded with the card (or tuned car), are displayed in the "TUNED" ranking. Your time, when not using a card, are displayed in the "NORMAL" ranking. The only way to accumulate points is to play with a card.
The BUNTA Challenge!
@ Game Content & Rules Race head-to-head against a single rival (BUNTA), on four different courses: Akagi, Akina, Happogahara and Irohazaka For each course, only Dry or Night conditions may be selected. A Card with saved points is necessary to play. Player must finish ahead within the time limit to win. Finishing behind or over the time limit means the player loses. Beating Bunta earns points and increases the Bunta Level for that course by one. The Bunta Level indicates Bunta's strength; the higher the level the stronger he becomes. Losing reduces the player's points total.
Network Battle Race
@ Game Content & Rules Two vehicles race for victory. When either car passes a checkpoint, remaining race time will be increased. The winner is the car that crosses the finish line first or is occupying first place when time runs out.
Acar built on the Card (Custom Car) may also be used. When racing with a Custom Car, results will be saved on the Card.
Challengers may challenge at any point during the champion side race. Cards may not be purchased during a Network Battle Race.
Before the Race
[Champion Side]
@ Battle Entry Challenge Request Screen
When a challenge occurs before the start of the race (during selection phase):
If the challenge occurs before the mode selection phase (during Car Selection etc), the Network Battle Race Information Screen is displayed directly before the selection phase. If the challenge occurs after the selection phase, selection is interrupted and the Network Battle Race Information Screen is displayed.
When a challenge occurs during the race:
The race is interrupted and the Network Battle Race Information Screen is displayed.
@ Network Battle Race Information Screen
The challenger selects the course while the champion waits at the Network Battle Race Information Screen.
[Challenger Side]
@ Network Battle Race Select Screen
This screen asks if a new player wishes to enter a Battle Race. It only appears when a new player first inserts coins and the current player has opted to accept Battle Race challengers.
@ Card Entry Screen
When a Battle Race is established, the Card Entry Screen appears. A Battle can be raced even without a Card. If there is no Card, the game proceeds to the Car Selection and Transmission Selection Screens. The Course Selection Screen then appears. The challenger selects the course. OPPONENT'S INFO
a 0.0% nn |
SEE OPPONENT'S TIME ITH THE CHANGE VIEW BUTTON
YOUR|OPPONENT IS NOW SELECTING A COUR:
ENTER BATTLE RACE?
aS By OSM By
¢# OPPONENT'S INFO “SPD.
NAME
MODEL : POINT
WIN PERCENTAGE
BATTLE LEVEL
STEERING
After the Race Result
@ Results Screen BATILE RESULT TOTAL TIME After a battle, the Results Screen LAP TIME appears. Depending on the results, the Battle Level will change. _ ADVANTAGE
Point
BATTLEPOINTS qooupt VICTORY BONUS: 2onops ADVANTAGE BONUS 195pts PTS. ACQUIRED a1gsprs
TOTAL POINTS BIAIpts
@ Continue Screen
The winning player will receive victory points and will be allowed to continue play. The losing player will go to the Continue Screen.
When the number of victories exceeds the set limit When a player's total number of victories exceeds the set limit, the player will be taken to the Continue Screen even if they win. (See Section "10-3 F".) B
Configuration
When a Card is inserted, a number of options may be set. Press the View Change Button at the Card Data Confirmation Screen to go to the Configuration screen. When displaying the configuration Screen, you can select the item by the Shift Lever. After selecting the item, press the Start Button and change the setting by the Steering Wheel. After changing the setting, press the Start Button again to be settled the new settings.
CONFIGURE
BGM NAVIGATION DISPLAY ON OFF —PAPERCUP Tm ISLAY
ADJUST GEAR SHIFT
- on DR ama ems 6)
@ BGM Set race background music options On: Play BGM as normal (Default Setting). Off: Turn BGM off. Fix: Play the melody selected at Song Selection. Will play the same BGM until changed.
@ Navigation Display Set options for the Navigation Display that appears at the lower left of the Race Screen. On: Show navigation display (Default setting). Off: Do not show navigation display. Paper Cup: A paper cup full of water appears on the navigation display.
@ Steering Set steering wheel stiffness. 1 to 9: 1 is the loosest. Stiffness increases up to a maximum setting of 9. (Default Setting is 5)
@ Time Display Set the Time Display on the Race Screen. Normal: Standard time display. (Default setting) Simple: Simplified time display.
@ Force Quit Force end of game during Legend of the Streets and Time Attack play. Off: Disable force quit (Default setting) On: Enable force quit. Press the Start and Change View Buttons simultaneously to end game.
Game Over
With "Legend of the Streets", "Time Attack" and "Network Battle Race" play, the Continue Screen appears after each race. If you choose not to continue, the game ends.
Transferring Old Card Data
Card data from the previous version, "Initial D" may be transferred for use with “Initial D Ver. 2”. Not all player data will be transferred to the new Card. @ Transferable Data: Points, car model, player name, customization options, Auto/ Manual transmission setting, number of plays till next inspection (the number of plays remaining on the Card, plus 50). @ Non-transferable Data: | Tune-up (Tune-up status is returned to default, but transferred points may be used to re-tune the car), times, race results, Legend of the Streets status.
- The player inserts coins to start.
DO YOU HAVE AN INITIAL D CARD?
Player inserts Card at the Card Entry Screen.
- Player inserts credits at the Transfer Card Data Screen.
TRANSFER INITIAL D CARD DATA
TRANSFERRING DATA TO THE INTIAL D VER.2) CARD
YOU MUST TRANSFER YOUR INITIAL D CARD DATA TO ANEW INITIALD VER.2 CARD.
- The old Card will be ejected. This Card can no longer be used.
- When the Card Data Transferred message appears, the game will restart. The new Card is for exclusive use with the Initial D Ver. 2, and cannot be used with the previous version, Initial D.
Limit on Card Use
Each Card can be used for up to fifty plays, until Car Inspection time is reached. Continued game play after each race is not counted as part of the 50 game limit. Cards may be renewed by transferring data to a new Card (stored points will not be lost). However, if you do not renew your card at the Car Inspection, you will not longer be able to play using the data stored on your card.
Car Selections
TOYOTA TRUENO GT-APEX [AE86] LEVIN GT-APEX [AE86] LEVIN SR [AE85] MR2 G-Limited [SW20] MR-S S EDITION [ZZW30] ALTEZZA RS-200 [SXE10] CELICA GT-FOUR [ST205]
NISSAN
SKYLINE GT-R V spec SKYLINE GT-R V spec
[BNR32]
[BNR34] SILVIA K's [S13] SILVIA Q's [S14] SILVIA K's AERO [S14] SILVIA spec-R [S15] 180SX TYPE X [RPS13] SILEIGHTY [RPS13] HONDA
CIVIC TYPE R [EK9] INTEGRA TYPE R [DC2]
CIVIC SiR [EG6]
$2000 [AP1]
MITSUBISHI LANCER EVOLUTION GSR [CE9A] LANCER EVOLUTION RS [CN9A] LANCER EVOLUITON ZGSR [CT9A]
MAZDA RX-7 Type R [FD3S] RX-7 SPIRIT R Type A [FD3S] RX-7 oollI[FC3S] ROADSTER SSpecial [NA6C] ROADSTER RS [NB8C]
SUBARU IMPREZA WRX STi Version Y [GC8] IMPREZA WRX STi [GDB]
SUZUKI Cappuccino [EA11R]
Race Courses
Easy:
Normal:
Hard I: Hard II: Expert I: Expert II:
Legend of the Streets Rival Characters
@ EASY (MYOGI) IGGY TAK SHINGO ZACK
@ NORMAL (USUI) TWO GUYS FROM TOKYO NOBU MAYA & SIMONE SID
@ HARD I (AKAGI) KYLIE DANNY K.T. RY
@ HARD II (AKINA) KENJI COLE AKI TAK
@ EXPERT I (HAPPOGAHARA) TORU DICE SMILEY TOUCH
@ EXPERT II (IROHAZAKA) HAWK KYLE CAINE K.T. TAK BUNTA Myogi, Circular Course/3 laps, Clockwise & Counter-clockwise, Day & Night, Dry & Wet Usui, Circular Course/2 laps, Clockwise & Counter-clockwise, Day & Night, Dry & Wet Akagi, Single road, Uphill & Downhill, Day & Night, Dry & Wet Akina, Single road, Uphill & Downhill, Day & Night, Dry & Wet Happogahara, Outbound & Inbound, Night, Dry & Wet Irohazaka, Single road, Downhill/Reverse, Day & Night, Dry & Wet
LEVIN SR [AE85] LEVIN SR [AE85] CIVIC SiR [EG6]
SKYLINE GT-R V spec [BNR32]
SILVIA spec-R [S15] ALTEZZA RS-200 [SXE10] SILEIGHTY [RPS13] Cappuccino [EA11R]
RX-7 Type R [FD38] SILVIA Q's [S14] RX-7 Type R [FD38] RX-7 « III [FC3S]
180SX TYPE X [RPS13] SILVIA K's [S13] LEVIN GT-APEX [AE86] TRUENO GT-APEX [AE86]
ROADSTER SSpecial [NA6C]
CIVIC TYPE R [EK9]
INTEGRA TYPE R [DC2]
LANCER EVOLUTION RS [CN9A] LANCER EVOLUTION GSR [CE9A] MR2 G-Limited [SW20] RX-7 Type R [FD3S] TRUENO GT-APEX [AE86] IMPREZA WRX type R STi Version [GC8]
- EXPLANATION OF TEST AND DATA DISPLAY
By operating the switch unit, periodically perform the tests and data check. When installing the machine initially or collecting cash, or when the machine does not function correctly, perform checking in accordance with the explanations given in this section. The following shows tests and modes that should be utilized as applicable. This product's basic system consists of the NAOMI 2 GD-ROM game board. The system enables you to play several games one after the other just by changing a GD-ROM disc and key chip. The product supports, therefore, the following 2 test modes:
- System test mode for an automatic self-diagnostic test (generally used by every product that contains the basic system) and a coin assignment (specifically used by this product) and
- Game test mode for testing the input/output control devices and setting the difficulty level (specifically used by this product). This manual does not cover the automatic self-diagnostic test. For more information about the system test mode, see the attached NAOMI NETWORK SYSTEM Service Manual.
TABLE 10 EXPLANATION OF TEST MODE
ITEMS DESCRIPTION
INSTALLATION When the machine is installed, perform the following: OF MACHINE 1. Check to ensure each is the standard setting at shipment.
- Check each Input equipment in the INPUT TEST mode.
- Check each Output equipment in the OUTPUT TEST mode.
- Test on-IC-Board IC's in the SELF-TEST mode.
MEMORY This test is automatically executed by selecting RAM TEST, or ROM BOARD TEST in the Menu mode.
PERIODIC Periodically perform the following: SERVICING 1. MEMORY TEST
- Ascertain each setting.
- To test each Input equipment in the INPUT TEST mode.
- To test each Output equipment in the OUTPUT TEST mode.
- CARD R/W TEST
CONTROL 1. To check each Input equipment in the INPUT TEST mode. SYSTEM 2. Adjust or replace each Input equipment.
- If the problem still remains unsolved, check each equipment's mechanism movements.
MONITOR In the Monitor Adjustment mode, check to see if Monitor (Projector) adjustments are appropriate.
IC BOARD MEMORY TEST
DATA CHECK Check such data as game play time and histogram to adjust the difficulty level, ete.
10-1 SWITCH UNIT AND COIN METER
uN Never touch places other than those specified. Touching places not specified can cause electric shock and short circuit accidents.
WARNING!
(0?) @ Adjust the sound to the optimum volume, taking into consideration the
environmental requirements of the installation location.
SWITCH UNIT
Open the coin chute door, and the switch unit shown will appear. The functioning of each SW is as follows: ? : . “ ®
FIG. 10. 1 a SWITCH UNIT
- Note: Actual Switch Unit will appear different. SPEAKER Test SERVICE DEMAG fe)
@ SOUND VOLUME SWITCH: Adjusts sound volume for all of the machines' Speakers. (SPEAKER)
@ TEST BUTTON: For the handling of the test button, refer to the following pages. (TEST)
@ SERVICE BUTTON: Gives credits without registering on the coin meter. (SERVICE)
@ DEMAGNETIZER SWITCH: Eliminates the on-screen color unevenness due to magnetization of (DEMAG.) CRT. First use this SW before performing the monitor's color adjustment.
COIN METER
Open the Cashbox Door by using the key to have the Coin Meter appear COIN METER underneath the Cashbox. TT
FIG. 10.1b
10-2 SYSTEM TEST MODE
Go)
IMPORTANT!
The contents of settings changed in the TEST mode are stored when the test mode is finished from EXIT in the menu mode. If the power is turned off before the TEST mode is finished, the contents of setting change become ineffective. Executing "BACKUP DATA CLEAR" in the SYSTEM TEST MODE does not clear the BOOKKEEPING data in the GAME TEST mode. Entering the TEST mode clears fractional number of coins less than one credit and BONUS ADDER data. Perform setting as per specified in this manual for operation. If setting not specified is performed for operation, proper function of this product may not be obtained.
In the SYSTEM TEST MODE, IC BD functioning can be checked, the monitor adjusted, and the coin setting performed. Refer to NAOMI NETWORK SYSTEM SERIVCE MANUAL for the details. Note that the setting of the following items need to be performed in accordance with the instruction given.
@ CABINET TYPE : 1 PLAYER(S) @ MONITOR TYPE : HORIZONTAL @ SERVICE TYPE : COMMON @ COIN CHUTE TYPE : COMMON @ NETWORK TYPE : NONE
The SEQUENCE SETTING items of COIN/CREDIT SETTING are as follows.
@ SEQUENCE SETTING SEQUENCE 1: Number of credits required for starting the game. SEQUENCE 2: Number of credits required for continuing the play. SEQUENCE 3: Number of credits required for dedicated CARD purchase. SEQUENCE 4~8: NOT USED
10-3 GAME TEST MODE
@ When changing the game configuration, changes will not take effect until the Game Test Mode has been completed. Be sure to exit the Game Test Mode
A. GAME TEST MENU MODE
Select GAME TEST MODE from the System Menu screen to display the Game Test Menu screen.
Use the SERVICE Button to move the cursor to the desired test item. Press the TEST Button to enter the selected item.
SYSTEM MENU
RAM TEST GAME TEST MODE JVS TEST SOUND TEST INPUT TEST TEST . — OUTPUT TEST EM ASSIGNMENTS FORCE FEEDBACK COIN ASSIGNMENTS Ae ae oe eipbeeion trak eae GAME ASSIGNMENTS BACKUP DATA CLEAR CARDIRIAW TEST CLOCK SETTING GLOSH SETTING
aeer BOOKKEEPING Neath bee Ar acide BACKUP DATA CLEAR NETWORK SETTEING aa GAME TEST MODE ae) SELECT WITH SERVICE BUTTON ae AND PRESS TEST BUTTON
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
SYSTEM TEST MODE MENU Screen GAME TEST MENU Screen
After making changes, be sure to select EXIT and press the TEST Button in order to enable the new settings.
Move the cursor to EXIT and press the TEST Button to return to the System Menu screen.
B. INPUT TEST
Select INPUT TEST to display the following screen and check the status of input devices. This test should be used periodically to check that each input device is functioning correctly.
GAME TEST MODE
INPUT TEST
STEERING XXH ACCEL XXH BRAKE XXH GEAR POSITION N START OFF CHANGE VIEW OFF z OFF OFF
PRESS TEST AND SERVICE BUTTON TO EXIT
FIG. 10. 3 b INPUT TEST Screen
Test the STEERING, ACCEL and BRAKE controls to ensure that they are functioning properly and that the parameters change smoothly as each input device is operated.
Display N, UP and DOWN using the GEAR POSITION. N should display there is no control input. Verify that both UP and DOWN display in sync with the position of the shift knob.
Press the START, CHANGE VIEW, SERVICE and TEST Buttons. If functioning correctly, each indicator will switch from OFF to ON.
STEERING GEAR POSITION |
(Shift knob)
CHANGE VIEW
BRAKE
ACCEL
Press the SERVICE and TEST Buttons simultaneously to return to the Game Test Menu screen.
C. OUTPUT TEST
Select OUTPUT TEST to display the following screen and check the status of each lamp. This test should be used periodically to check that the lamps are functioning correctly.
GAME TEST MODE
OUTPUT TEST
->START BUTTON CHANGE VIEW BUTTON
PRESS TEST BUTTON TO EXIT
FIG. 10. 3 c OUTPUT TEST Screen
The cursor toggles automatically between START Button and CHANGE VIEW Button, and each lamp lights up.
Move the cursor to EXIT and press the TEST Button to return to the Game Test Menu screen.
D. FORCE FEEDBACK
A
When you select "FORCE FEEDBACK", a connection test runs and the STEERING rotates. When the connection check completes, a screen similar to the one below is displayed, and you may adjust the STEERING resistance.
GAME TEST MODE
FORCE FEEDBACK
(MIN 0 : MAX 10 : DEFAULT 4)
FORCE= XX
UP DOWN
FORCE TEST (FORCE = 4)
CENTER OFF RI 'T OFF LEFT OFF
-> EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
FIG. 10. 3 d FORCE FEEDBACK Screen
@ FORCE:
@ FORCE TEST: Set the STEERING resistance The smaller the value, the weaker the resistance; the larger the value, the stronger the resistance. (Minimum value is 0; the maximum value is 10. The default setting is 4.) Move the cursor to UP or DOWN and press the TEST Button to change the value.
Verifies the STEERING motor is working properly Conducted when the STEERING resistance is set at 4. Toggle between OFF and ON by aligning to CENTER and pressing the TEST Button. The STEERING will rotate and stop in the center position. Pressing the SERVICE Button moves the cursor to the next menu item and CENTER changes to OFF. Control of the STEERING is then released. When the RIGHT menu item is ON, the STEERING rotates to the right as far as possible and then stops. Press the SERVICE Button again to turn it OFF and release control of the STEERING. When the LEFT menu item is ON, the STEERING rotates to the left as far as possible and then stops. Press the SERVICE Button again to turn it OFF and release control of the STEERING. Move the cursor to EXIT and press the TEST Button to return to the Game Test Menu screen.
E. INPUT ASSIGNMENTS
Select INPUT ASSIGNMENTS to display the following screen.
GAME TEST MODE
INPUT ASSIGNMENTS
STEERING: XXX (DEFAULT = 0) ACCEL : XXX (DEFAULT = 0) BRAKE : XXX (DEFAULT = 0)
DEFAULT SETTING
-> EXIT
AND PRESS TEST BUTTON
FIG. 10. 3 ea INPUT ASSIGNMENTS Screen SELECT WITH SERVICE BUTTON
You can adjust each of the menu items by moving the cursor to the menu item and pressing the TEST Button.
Return all settings to the default settings with DEFAULT SETTING.
@ STEERING: Make adjustments to STEERING Press the TEST Button to display the following screen.
GAME TEST MODE
STEER ASSIGNMENT
(MIN -40 : MAX 40 : DEFAULT 0) STEERING = XXX
CENTER
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
FIG. 10. 3 eb STEER ASSIGNMENTS Screen Center the STEERING. When the "0" displayed is not exactly aligned with the "“" mark above CENTER, use the cursor to select RIGHT or LEFT and move the "0" until it is displayed directly above the "“" mark. Move the cursor to RIGHT and press the TEST Button to move the "0" to the right. Each time you press the TEST Button, "0" moves slightly to the right. Move the cursor to LEFT and press the TEST Button to move the "0" to the left. Each time you press the TEST Button, "0" moves slightly to the left.
Move the cursor to EXIT and press the TEST Button to return to the INPUT ASSIGNMENTS screen.
@ ACCEL: Make adjustments to ACCEL Press the TEST Button to display the following screen.
GAME TEST MODE
ACCEL ASSIGNMENT
(MIN -40 : MAX 40 : DEFAULT 0) ACCEL = XXX
cv)
MIN MAX
RIGHT LEFT
-> EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
FIG. 10. 3 ee ACCEL ASSIGNMENTS Screen
@ BRAKE: Make adjustments to BRAKE Adjust the distance between "0" displayed and the '" mark equally so that when your foot is off the ACCEL pedal, the "0" on the left is aligns with the "*" above MIN and when you press the ACCEL pedal down all the way, the "0" on the right is aligns with the "™" mark above MAX. Move the cursor to RIGHT and press the TEST Button to move "0" to the right. Each press of the TEST Button moves "0" slightly to the right. Move the cursor to LEFT and press the TEST Button to move "0" to the left. Each press of the TEST Button moves "0" slightly to the left.
Move the cursor to EXIT and press the TEST Button to return to the INPUT ASSIGNMENTS screen.
Press the TEST Button to display the following screen.
GAME TEST MODE
BRAKE ASSIGNMENT
(MIN -40 : MAX 40 : DEFAULT 0) BRAKE = XXX
A A MIN MAX
RIGHT LEFT
-> EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
FIG. 10. 3 ed BRAKE ASSIGNMENTS Screen Adjust the distance between "0" displayed and the '"" mark equally so that when your foot is off the BRAKE pedal, the "0" on the left is aligns with the "*" above MIN and when you press the BRAKE pedal down all the way, the "0" on the right is aligns with the "™" mark above MAX. Move the cursor to RIGHT and press the TEST Button to move "0" to the right. Each press of the TEST Button moves "0" slightly to the right. Move the cursor to LEFT and press the TEST Button to move "0" to the left. Each press of the TEST Button moves "0" slightly to the left.
Move the cursor to EXIT and press the TEST Button to return to the INPUT ASSIGNMENTS screen.
F. GAME ASSIGNMENTS
Select GAME ASSIGNMENTS to display the current game settings and make changes.
CARD R/W
->EXIT GAME TEST MODE
GAME ASSIGNMENTS.
GAME DIFFICULTY NORMAL DEFAULT VIEW DRIVER SEAT NUMBER NO DEFINED
CONTINUE
MAX WIN STREAK INFINITY
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON ON ON
FIG. 10. 3 fGAME ASSIGNMENTS Screen
The GAME DIFFICULTY and CONTINUE menu items can be set only when the SEAT NUMBER is set to either 1 or NO DEFINED. The MAX WIN STREAK menu item can be set only when the SEAT NUMBER is set to 1.
@ GAME DIFFICULTY:
@ DEFAULT VIEW:
@ SEAT NUMBER:
@ CARD RW:
@ CONTINUE:
@ MAX WIN STREAK: Set the level of difficulty for the game You may select one of 5 different levels of difficulty: VERY EASY, EASY, NORMAL, HARD or VERY HARD. This setting does not affect the speed of rivals in "Legend of the Streets" mode.
Set the view perspective at the start of races You may select one of the following 2 settings: DRIVER view or REAR view.
Assign seat numbers to seats in each arcade unit for network play If you have two arcade units side by side, make sure you assign different seat numbers; the seat on the left would be 1 and the one on the right would be 2. If the unit will not be used for network play, set the SEAT NUMBER to NO DEFINED. You may select one of the following 3 settings: 1, 2 or NO DEFINED.
Set to ON if using the Card Reader/Writer. Set to OFF when not using the Card Reader/Writer.
Enable/Disable Continue function. ON: Enables Continue for Legend of the Street Time Attack and Network Battle Race games. OFF: Disable Continue.
Set maximum possible wins in the Battle Race game 1/3/5/10/20/30: Causes the continue screen to appear when the number of wins exceeds the indicated limit. INFINITY: Play continues without inserting new coins as long as the player continues to win.
Changes to settings are not enabled until Test Mode is exited. After changing settings, be sure to exit Test Mode.
After changing the settings, select EXIT and press the TEST Button to return to the Game Test Menu screen.
CARD R/W TEST
Clean the card reader/writer periodically.
IMPORTANT
Test the functionality of or clean the CARD R/W (read/writer). The CARD R/W should be tested and cleaned periodically.
GAME TEST MODE
CARD R/W TEST
CARD R/W STATUS : **#*** (INFOMATION )
INITIALIZE CLEANING CHECK R/W : -- -> EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
FIG. 10. 3 g CARD R/W TEST Screen
The cursor can move to the following items:
@ INITIALIZE: _ Initialization
@ CLEANING: Cleaning
@ CHECK R/W: _ R/W Operation Check
Move the cursor to EXIT and press the TEST Button to return to the Game Test Menu screen.
Depending on the R/W running mode, one of the following is displayed in "*****" in "CARD R/W STATUS : ***##": READY......... Now waiting (Clear to Send Command) INITIAL....... Now initializing (Not Clear to Send Command) CLEAN ........ Now cleaning (Not Clear to Send Command) Cards are being taken out from the dispenser (Not Clear to Send Command) Sample data is saved onto the card (Not Clear to Send Command) Sample data is printed onto the card (Not Clear to Send Command) Load card data and compares it with sample data (Not Clear to Send Command) Eject cards (Not Clear to Send Command) SHUTTER.... Now closing/opening the shutter (Not Clear to Send Command) ERROR. ........ Error (Clear to Initialize Command Only)
While a status with a note of "Not Clear to Send Command " in parentheses is on-screen, no operations are accepted. If such a status has occurred, wait until the operation in that status stops automatically and the display comes to READY.
Occasionally, the "INFORMATION" field on the screen outputs one of the instructions below. It usually displays nothing (blank), although it displays NO ERROR when each item is completed normally.
While cleaning is in progress, waiting in the ready mode for inserting a cleaning card:
-- PLEASE INSERT CLEANING CARD --
After the operation check, waiting for the ready mode for ejecting the card:
-- PLEASE REMOVE --
When an error occurs, its type are displayed in the "INFORMATION" field: NO ERROR... Nomal Completion CAN'T LOAD... Loading Error CAN'T SAVE uu... Writting Error DRAW CARD ERROR Error in Taking Card from dispenser CARD STUFFED . Card Jamming SHUTTER ERROR ............. Shutter Error
WRONG DATA .... eee Data Error, Dispenser Card Empty CONNECTION ERROR .....Connection Error
SCIF ERROR .........:ccsesseeeees RC-232C Communication Error
UNKNOWN EROR.............. Unknown Error
The "---" field in "CHECK R/W : ---" shows the result of the operation check. Not Checked
No Failure
Failure
Cleaning refers to the optional cleaning of the heads on the CARD R/W. Refer to section <7-2> Head Cleaning for details on the use of the cleaning card.
Select "CLEANING" and press the TEST Button.
If the CARD R/W is not initialized, it will be initialized first. :INITIALIZE is displayed. The following message appears to show that the R/W is ready for insertion of the cleaning card: -- PLEASE INSERT CLEANING CARD --
Insert the cleaning card into the R/W. On the screen, the status display is replaced with "CLEAN", and cleaning begins. Once cleaning ends after a lapse of a certain time, the R/W automatically ejects the card. The status display changes from "CLEAN" to "READY." NO ERROR is displayed on the screen.
TESTING FUNCTIONALITY
The operation check takes out each card from the dispenser, and writes the sample data onto it. The check then loads and reads it, and checks whether the read data matches the sample data. Then, the check ejects the card. When you draw out the card at this time, the entire process of the check is completed. The functionality test uses 1 card from the dispenser.
Select "CHECK R/W" and press the TEST button. R/W operates automatically as follows: If the CARD R/W is not initialized, it will be initialized first. :INITIALIZE is displayed. Close the shutter: SHUTTER is displayed. Takes out the card from the dispenser: GET is displayed. Saves the sample data onto the card: SAVE is displayed. Print the sample data onto the card: PRINT is displayed. Loads the data on the card for comparison with the sample data: LOAD is displayed. Open the shutter: SHUTTER is displayed. Ejects the card: OUT is displayed. Draws out the card. Now the entire process of the check is completed.
If execution of the operation check results in display of NG, check the error condition. If you can take action against the error, execute the operation check again after you take the proper action. If you cannot take action against the error, repeat the check several times. If the result of the check is still NG, clean the R/W. If the subsequent execution of the operation check still results in NG, the R/W may be faulty.
If an error occurs, it is cleared by executing the INITIALIZE command.
H. CLOSE SETTING
Select CLOSE SETTING to display the following screen. Change the setting for the time when the store closes. The game will be unusable for card play starting 15 minutes before the time you set until 6:00 AM the next morning.
GAME TEST MODE
CLOSE SETTING
SCHEDULE TYPE : DAY SETTING
-> EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON FIG. 10. 3 ha CLOSE SETTING Screen
You can set SCHEDULE TYPE to DAY, WEEK or OFF. Press the TEST Button to select the item. (The unit is shipped with SCHEDULE TYPE set to OFF.)
Move the cursor to SETTING and press the TEST Button to display the appropriate time setting screen.
@ DAY: Set the daily store closing time. This time setting will be used every day
GAME TEST MODE
CLOSE SETTING 24:00
-> EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
FIG. 10. 3 hb CLOSE SETTING (DAY) Screen
Set the daily store closing time. When you press the SERVICE Button, the "hour" display will begin to flash. Press the TEST Button to select any hour from "19" to "26". Press the SERVICE Button again to accept the "hour" selection. Once accepted, the "minute" display will then begin to flash. Press the TEST Button to select one of the following "minute" options: "00, 15, 30, 45". Press the SERVICE Button again to accept the "minute" selection. When complete, move the cursor to EXIT. If you press the SERVICE Button when the cursor is next to EXIT, the "hour" display will begin to flash again indicating that you can change the settings.
Move the cursor to EXIT and press the TEST Button to return to the CLOSE SETTING screen.
@ WEEK: Seta different store close time for each day of the week
GAME TEST MODE
CLOSE SETTING
SUN 24:00 MON 24:00 TUE : 24:00 WED =: +=24:00 THU : 24:00 FRI 24:00 SAT : 24:00
-> EXIT
SELECT WITH SERVICE TTON AND PRESS TEST BUTTON
FIG. 10. 3 he CLOSE SETTING (WEEK) Screen
Set the store closing time for each day of the week. When you press the SERVICE Button, the "hour" display will begin to flash. Press the TEST Button to select any hour from "19" to "26". Press the SERVICE Button again to accept the "hour" selection. Once accepted, the "minute" display will then begin to flash. Press the TEST Button to select one of the following "minute" options: "00, 15, 30, 45". Press the SERVICE Button again to accept the "minute" selection. Once accepted, the "hour" display for the next day of the week will begin to flash. Set the "hour" and "minute" settings in the same fashion as described above. When you have completed setting the time for SAT, move the cursor to EXIT. If you press the SERVICE Button when the cursor is next to EXIT, the "hour" display for SUN will begin to flash again indicating that you can change the settings.
Move the cursor to EXIT and press the TEST Button to return to the CLOSE SETTING screen.
@ OFF: Do not set any store closing times. Other SETTING items are not displayed
BOOKKEEPING
Select BOOKKEEPING to display the following screens of operating status data. Each time the TEST Button is pressed, the ensuing page appears. Pressing the TEST Button while the 5/5 page is displayed causes the Game Test Menu to return on the screen.
GAME TEST MODE
BOOKKEEPING 1/7
NUMBER OF GAMES 0 NUMBER OF NETWORK PLAY 0 NUMBER OF CARD 0 NUMBER OF CARD PLAY 0 PLAY TIME OD 0H 0M 0S AVERAGE PLAY TIME OM 0S. LONGEST PLAY TIME 0M 0S SHORTEST PLAY TIME OM 0S.
PLAY TIME HISTOGRAM
OM OS ~ OM59S. 1M 0S ~ 1M59S, 2M OS ~ 2M29S 2M30S ~ 2M59S 3M 0S ~ 3M29S. 3M30S ~ 3M59S 4M OS ~ 4M29S 4M30S ~ 4M59S 5M OS ~ 5M29S. 5M30S ~ 5M59S 6M OS ~ 6M29S. OVER 6M30S SO59G4 S64 SoG 9009
PRESS TEST BUTTON TO CONTINUE
FIG. 10. 3 i BOOKKEEPING (1/7) Screen
@ NUMBER OF GAMES: total number of games played
@ NUMBER OF NETWORK PLAY: _ total number of network games played
@ NUMBER OF CARD: total number of cards purchased
@ NUMBER OF CARD PLAY: number of games played with cards (selecting continue during card play gets added to this count)
@ PLAY TIME: total amount of game play time
@ AVERAGE PLAY TIME: average game play time
@ LONGEST PLAY TIME: longest game play time
@ SHORTEST PLAY TIME: shortest game play time
@ PLAY TIME HISTOGRAM: table of play times
Press the TEST Button to move to screen 2/7 of BOOKKEEPING.
GAME TEST MODE
BOOKKEEPING 2/7 GAME / LEGEND OF THE STREETS
MYOGI-1 MYOGI-2 MYOGI-3 MYOGI-4 ocooo
USUI-1 USUI-2 USUI-3 USUI-4 oooo
AKAGI-1 AKAGI-2 AKAGI-3 AKAGI-4 coco
AKINA-1 AKINA-2 AKINA-3 AKINA-4 ecco
PRESS TEST BUTTON TO CONTINUE
FIG. 10. 3 i BOOKKEEPING (2/7) Screen
Press the TEST Button to move to screen 3/7 of BOOKKEEPING.
GAME TEST MODE
BOOKKEEPING 3/7 GAME / LEGEND OF THE STREETS
HAPPOGAHARA-1 0 HAPPOGAHARA-2 0 HAPPOGAHARA-3 0 HAPPOGAHARA-4
IROHAZAKA-1 IROHAZAKA-2 IROHAZAKA-3 IROHAZAKA-4 IROHAZAKA-5 ocoooco
SPECIAL cv)
PRESS TEST BUTTON TO CONTINUE
FIG. 10. 3 i BOOKKEEPING (3/7) Screen
@ GAME/LEGEND OF THE STREETS: Displays the number of times each rival character was selected in "Legend of the Street" mode. "MYOGI-1" refers to the first rival in MYOGI which is IGGY.
Press the TEST Button to move to screen 4/7 of BOOKKEEPING.
GAME TEST MODE
BOOKKEEPING 4/7 GAME / TIME ATTACK
MYOGI 0 USUI 0
AKAGI 0
AKINA 0 HAPPOGAHARA 0 IROHAZAKA iv)
GAME / NETWORK GAME
MYOGI 0 USUI 0 AKAGI iv) AKINA 0 HAPPOGAHARA 0 IROHAZAKA 0
PRESS TEST BUTTON TO CONTINUE
FIG. 10. 3 i BOOKKEEPING (4/7) Screen
@ GAME'/TIME ATTACK: Displays the number of times each course was selected in TIME ATTACK mode
@ GAME/NETWORK GAME: _ Displays the number of times each course was selected in NETWORK GAME (VERSUS) mode Press the TEST Button to move to screen 5/7 of BOOKKEEPING.
GAME TEST MODE
BOOKKEEPING 5/7 GAME / BUNTA CHALLENGE
AKINA 0 HAPPOGAHARA 0 IROHAZAKA 0
TRANSMISSION SELECT
AUTOMATIC 0 MANUAL 0
PRESS TEST BUTTON TO CONTINUE
FIG. 10. 3 i BOOKKEEPING (5/7) Screen
@GAME/BUNTA CHALLENGE: _ Displays number of times each course has been selected for the Bunta Challenge. @TRANSMISSION SELECT: Displays the number of times each TRANSMISSION was selected in all game modes.
Press the TEST Button to move to screen 6/7 of BOOKKEEPING.
GAME TEST MODE
BOOKKEEPING 6/7 CAR SELECT
TRUENO 0 LEVIN(AE86) 0 LEVIN(AE85) 0 MR-2 0) MR-S 0 ALTEZZA 0 CELICA GT-FOUR 0 GTR(BNR32) 0) GTR(BNR34) 0 SILVIA(S13) 0 SILVIA(S14Q) 0) SILVIA(S14K) 0 SILVIA(S15) 0) 180SX 0 SILEIGHTY 0
PRESS TEST BUTTON TO CONTINUE
FIG. 10. 3 i BOOKKEEPING (6/7) Screen
Press the TEST Button to move to screen 7/7 of BOOKKEEPING.
GAME TEST MODE
BOOKKEEPING 7/7 CAR SELECT
CIVIC(EK9) 0
CIVIC(EG6) 0 INTEGRA 0 $2000 0 LANCER EVO3 0 LANCER EVO4 0 LANCER EVO7 0 RX-7(FD3S1) 0 RX-7(FD3S6) 0 RX-7(FC3S) 0 ROADSTER(NA6C) 0 ROADSTER(NB8C) 0
IMPREZA(GC8S6) 0
IMPREZA(GDB) 0
IMPREZA(GC8S5) 0 CAPPUCCINO 0
PRESS TEST BUTTON TO EXIT
FIG. 10. 3 i BOOKKEEPING (7/7) Screen
@ CAR SELECT: Displays the number of times each car was selected
Move the cursor to EXIT and press the TEST Button to return to the Game Test Menu screen.
J. BACKUP DATA CLEAR
Delete all BOOKKEEPING screen data. Use BACKUP DATA CLEAR in the SYSTEM TEST MODE to delete data about coin/credit collection. Deleting this data does not affect the game settings or other data stored by the game. Deleting this data will delete the data showing how many times the CARD R/W was used. After deleting the data, the CARD R/W automatically enters Head Cleaning mode. Refer to section <7-2> Head Cleaning for more information about head cleaning.
GAME TEST MODE
BACKUP DATA CLEAR
YES(CLEAR) -> NO (CANCEL)
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
FIG. 10. 3 j BACKUP DATA CLEAR Screen
To clear data, use the SERVICE Button to move the cursor to YES (CLEAR) and then press the TEST Button. When the data has been cleared, the message "COMPLETED" will be displayed.
Press the TEST Button again to return to the Game Test Menu screen.
Move the cursor to NO (CANCEL) and press the TEST Button to return to the Game Test Menu screen without clearing the data.
- CONTROL PANEL
nN In order to prevent an electric shock and short circuit, be sure to turn power RNIN! off before performing work by touching the interior parts of the product.
AN Exercise extreme caution when handling the internal parts of the Control
Panel. Watch out for damage, warping and loss. The loss of just one piece
(10?) Be sure to perform volume's move value setting in the Volume Setting in the Test Mode after replacing or adjusting the Volume.
IMPORTANT!
11-1 ADJUSTING/REPLACING THE VOLUME
ADJUSTMENT PROCEDURE
@ Loosen the 2 screws that secure the VR Bracket and move the VR Bracket to adjust the angle and condition of the gear alignment.
@ Keeping the handle straight, align the gears so that the direction of the D Cut side of the Volume Shaft matches that shown in the diagram.
@ Tighten the 2 screws and secure the VR Base.
SCREW (2) M4~ 10, w/flat & spring washers D CUT SIDE
FIG. 11.2a
@ After making adjustments, use the Volume Setting Screen to set the Volume (refer to 10-3E). The recommended value for the handle Volume is "80H" when the handle is set straight. Verify that the value decreases when the handle is rotated to the left and increases when rotated to the right. Use the Test Mode to view the Volume value (refer to 10-3B).
REPLACEMENT PROCEDURE
This procedure requires the following tools: Philips screwdriver for the M4 screws, 2 mm hexagonal wrench, 11—12mm monkey wrench, nipper, cutter, wire stripper, soldering iron and industrial dryer.
@ Remove the connectors.
@ Remove the 2 screws securing the VR Bracket and remove the entire Bracket and Volume.
CONNECTOR (1) RED 3P
SCREW (2) M4x10, wiflat & spring washers [
@ Loosen the 2 hexagon socket screws on the Gear Holder and remove the Gear Holder.
@ Remove the nut securing the VR Bracket, then separate the Volume from the VR Bracket and replace it.
GEAR HOLDER
HEXAGON SOCKET SCREW (2) M4x8 220-5484 220-5753
FLAT WASHER
SPRING WASHER
FIG. 11.2b
11-2 GREASING
nN Grease is inflammable and must never be close to fire. W RNIN 1 Grease may be apt to be erroneously used or drunk, and must not be placed in Al Gi a location where children can access.
nN Grease does harm to your body if you aspirate it. Do not perform any work
related to grease in a location where ventilation is insufficient.
(0?) Be sure to use the designated type of grease. If a non-designated type grease is used, components may break.
Use spray grease once every three months to grease up the gear mesh portion of the constituent parts. Use "Grease Mate" (part number 090-0066) for the spray grease.
GREASING
\
- SHIFT LEVER
A\
WARNING!
In the Test Mode, if the SHIFT LEVER's SW can not be inputted satisfactorily, replace the Switch. Apply greasing to the Mechanism's sliding portion once every 3 months. When performing the above work, remove the Shift Lever Unit.
Before starting to work, ensure that the Power SW is OFF. Failure to observe this can cause electric shock and short circuit hazards. Use care so as not to damage wirings. Damaged wiring can cause electric shock and short circuit hazards.
12-1 REMOVING THE SHIFT LEVER TAMPERPROOF SCREW (4),black
Turn the Power SW off. Note: Image Differs from actual Unit.
é Remove the 4 Tamperproof ng . & S DOWN Screws to lift the Shift Lever ~ i Unit. /
Disconnect the Connector to remove the Shift Lever Unit.
When reinstalling, follow the procedure opposite as when removing. At this time, ensure that "DOWN" display appears on the upper part as shown.
After reinstalling, be sure to check INPUT TEST in the test mode. (See 10-3B.)
TAPPING SCREW (2) “ M3x16 FIG. 12.1
CREASING 12-2 SWITCH REPLACEMENT
@ Disconnect the wiring Connector of the Switch to be replaced.
@ Remove the 2 Tapping Screws to replace the Microswitch.
12-3 GREASING
Apply greasing once in 3 months to the specified portions. For spray grease, use NOK KLUBER L \ MICROSWITCH 509-5704 60 or Grease Mate (Part No. 090-0066).
FIG. 12.2
- ACCELERATOR & BRAKE
this can cause electric shock or short circuit.
WARNING! Use care so as not to damage wirings. Damaged wiring can cause electric
‘ ' shock or short circuit. Do not touch undesignated places. Touching places not designated can cause electric shock or short circuit. This work should be performed by the Location's Maintenance Man or Serviceman. Performing work by non-technical personnel can cause electric shock hazard. When performing work such as parts replacement other than those specified in this manual, be sure to contact where you purchased the product from. Confirm the work procedures and obtain precautions from where you purchased the product prior to performing work. Inappropriate parts replacement and/or installation with erroneous adjustment can cause an overload or the parts to come into contact, resulting in an electric shock, a short circuit, and a fire.
man Before starting to work, ensure that the Power SW is OFF. Failure to observe
(0?) Be sure to perform volume's move value setting in the Volume Setting in the Test Mode after replacing or adjusting the Volume. (See 10-3E.)
IMPORTANT!
If Accel. and Brake operation is not satisfactory, adjustment of volume installation position or volume replacement is needed. Also, be sure to apply greasing to the gear mesh portion once every 3 months.
13-1 ADJUSTING OR REPLACING THE VOLUME
The following tools are required for the operations below: Phillips screwdrivers for M4 and M5. The appropriate value for both ACCEL. Volume and Brake Volume is under 30H when released and over COH when stepped on. Check Volume values in the TEST mode. Since work is performed inside the energized cabinet, be very careful so as not to touch undesignated places. Touching places not specified can cause electric shock or short circuit.
RUSS SCREW(2),chrome ADJUSTING PROCEDURE
@ Take out the 2 truss screws and remove the Front Cover from the Accel. & Brake Unit (FIG. 13. 1 a).
FIG. 13. 1a
RONT COVER
@ Loosen the screw which secure the Potentiobase, and adjust the Volume value by moving the Base. (FIG. 13. 1 : b) SCREW M5x12,w/flat & 4 spring washers \) @ Secure the Potentiobase.
@ Perform volume setting in the POTENTIOBASE volume setting mode.
220-5484 FIG. 13. 1b TRUSS SCREW @} 220-5753
REPLACING THE VOLUME POTENTIOCOVER
@ Turn the power off.
@ Take out the 2 screws and remove the Potentiocover (FIG. 13. 1c).
@ Disconnect the connector of the volume to be replaced.
@ Remove the screw which secures the Potentiobase (FIG. 13. 1 b).
@ Remove the Potentiobase together with the volume as is attached. (FIG. 13. 1c)
@ Remove the base and the gear to replace the volume. FIG. 13. 1
@ Adjust the volume as per the previous page after replacing.
13-2 GREASING
(10?) Be sure to use the designated
grease. Using undesignated grease
Use spray grease once every three months to grease up the Spring and gear mesh portion. For spray greasing, use GREASE MATE (PART No. 090-0066). FIG. 13.2
- COIN SELECTOR
HANDLING THE COIN JAM
If the coin is not rejected when the REJECT button is pressed, open the coin chute door and open the selector gate. After removing the jammed coin, put a normal coin in and check to see that the selector correctly functions.
CLEANING THE COIN SELECTOR
(10?) @ Remove and clean smears by using a
soft cloth dipped in water or diluted
IMPORTANT! chemical detergent and then squeezed
dry. @ Never apply machine oil, etc. to the Coin Selector. @ After cleaning the Coin Selector, insert a regular coin in the normal working status and ensure that the Selector correctly functions.
The coin selector should be cleaned once every 3 months. When cleaning, follow the procedure below:
- Turn the power for the machine OFF. Open the coin chute door.
- Remove the coin selector from the coin chute door.
- Open the gate and dust off by using a soft brush (made of wool, etc.).
- Remove and clean smears by using a soft cloth dipped in water or diluted chemical detergent and then squeezed dry.
- Remove the CRADLE. When removing the retaining ring (E ring), be very careful so as not to bend the rotary shaft.
- Remove stain from the rotary shaft and shaft receiving portions by wiping off with a soft cloth, ete.
- After wiping off as per (6) above, further apply a dry cloth, etc. to cause the coin selector to dry completely. Insert a coin while keeping 7 the Reject Button pressed
COIN INSERTION TEST down and check if it is
rejected. Once every month, when performing the Coin SW Test, simultaneously COIN METER check the following: ——
@ Does the Coin Meter count satisfactorily? @ Does the coin drop into the Cashbox correctly? @ Is the coin rejected when inserted while keeping the Reject Button pressed down? FIG. 14¢
COIN DOOR
Ton ip tom.hay jappcontrols.com Happ Cantols” 106 Garlisch Drive Elk Grove, IL, 60007 -42-0405-00 Ph. 847-593-6161 ext, 107 Fx, 847-956-2091 YELLOW 26¢ (FITTED AS STANDARD) 42-0281-00 Visit our website htip://www.happcontrols.com 42-0517-05
42-7201-00 ‘exctustves
Custom "Guardian" Securi
42321600 LOWERDOOR 42.3145-16 FRAME 42327200 DOOR SCREWS 43-0183-00 DOOR & FRAME 42:3227-00
- PERIODIC INSPECTION TABLE
The items listed below require periodic check and maintenance to retain the performance of this machine and to ensure safe business operation. When handling the controller, the player will be in direct contact with it. In order to always allow the player to enjoy the game, be sure to clean it regularly. Also, it is advisable to provide wet tissue, etc. available for player use.
Be sure to check once a year to see if Power Cords are damaged, the plug is securely inserted, dust is accumulated between the Socket Outlet and the Power Plug, etc. Using the product with dust as is accumulated can cause fire and electric shock hazards. Never use a water jet, etc. to clean inside and outside the cabinet. If wetness occurs for any reason, do not use the product until it has completely dried. Periodically once a year, request the place of contact herein stated or the Distributor, etc. where the product was purchased from, as regards the internal cleaning. Using the product with dust as is accumulated in the interior without cleaning can cause a fire or accident. Note that cleaning the interior parts can be performed on a pay-basis.
WARNING!
TABLE 15
ITEMS DESCRIPTION PERIOD
| CABINET | Check Adjusters'contact with surface. | Daily |
CARD READER/WRITER Head cleaning Every 101 counts of the card reader/writer or Daily
CONTOROL PANEL Cleaning As necessary
Inspection of VR Monthly
Inspection of adjusting gear mesh Trimonthly
Greasing Trimonthly
| SHIFT LEVER | Inspection of SW | Monthly |
Greasing Trimonthly
| ACCEL. & BRAKE | Inspection of VR | Monthly |
Gear and Spring portion greasing Trimonthly MONITOR SCREEN cleaning. Weekly Check adjustments. Monthly or when moving. COIN CHUTE DOOR Inspection of COIN SW Monthly Goin insertion test Monthly Cleaning of COIN SELECTOR. Trimonthly
| SEAT | Greasing to the seat rail | Trimonthly |
| GAME BD | MEMORY TEST | Monthly |
Check settings. Monthly
| POWER SUPPLY PLUG | Inspection and cleaning | ‘Annually |
INTERIOR Cleaning
| CABINET SURFACES | Cleaning | As necessary |
CLEANING THE CABINET SURFACES
When the cabinet surfaces are badly soiled, remove stains with a soft cloth dipped in water or diluted (with water) chemical detergent and squeezed dry. To avoid damaging surface finish, do not use such solvents as thinner, benzine, etc. other than ethyl alcohol, or abrasives, bleaching agent and chemical dustcloth.
SEAT (Greasing to Seat Rail Portion)
Move the Seat to the rearmost position and apply spray greasing to the portion shown at the right
once every 3 months by using NOK KLUBER L60 -,
or GREASE MATE SEGA PART No. 090-0066. =
After greasing, move the Seat a few times forward tS
and backward so as to allow the grease to be 7 applied all over uniformly. Be sure to wipe grease which attaches to the surfaces of the PROTECT RUBBER on the Seat Rail, or any excess grease. FIG. 15
- TROUBLESHOOTING
16-1 CARD READER/WRITER
If this machine detects an error during the operation of the Card Reader/Writer, it will display the error messages listed below. Perform the appropriate maintenance based on the content of the error message displayed.
Should an error occur, do not attempt to open the top cover of the Card Reader/Writer. The unit will attempt to save the data to the customer's card and restore the game if the top cover is closed and the RESTORE command (hold down the Start button + Change View button for a short time) is used. However, attempting to use the RESTORE command after the top cover has been opened may force the game to shut down and not save data to the card.
When the game shuts down or the unit is reset, the data on the customer's card is not saved. In order to save customer data, perform the proper maintenance carefully.
TABLE 16. 1a
ERROR DISPLAY CAUSE COUNTERMEASURES
Error occurred while reading card. Card will be ejected without saving data. Please press the Start and Change View buttons. This message is displayed after several failed attempts to read the card at the end of the game. Press the Start button and Change View button at the same time to eject the card and end the game.
Error occurred while saving data. Please notify a store attendant. Please press the Start and Change View buttons. This message is displayed after several failed attempts to save data to the card at the end of the game. Leave the card in place and press the Start button and Change View button at the same time to retry the save operation. Remove the card and press the Start button and Change View button at the same time to restore or end the game. If this error occurs several times, use Test Mode to perform manual cleaning. (See 10- 3G.)
Printing error. Card will be ejected without printing or saving data. Please press the Start and Change View buttons. This message is displayed after several failed attempts to print at the end of the game. Press the Start button and Change View button at the same time to eject the card and end the game.
A shutter error has occurred. Please remove any cards present in card insertion slot. Please press the Start and Change View buttons. This message is displayed when the shutter is forced open or if the unit detects a problem with the shutter.
This message is displayed when the unit is unable to open/close the shutter. Correct the problem, then press the Start button and Change View button at the same time to restore the game. Circumstance may force the game to shut down.
Correct the problem, then press the Start button and Change View button at the same time to restore the game.
TABLE 16. 1a
ERROR DISPLAY CAUSE COUNTERMEASURES
This card cannot be used. Card will be ejected without saving data. Please press the Start and Change View buttons. This message is displayed when the card in the Card Reader/ Writer is not a proper player card at the end of the game. Press the Start button and Change View button at the same time to eject the card and end the game.
Card jam. Ejecting card. Please press the Start and Change View buttons. This message is displayed when, various operations fail because of dirty rollers or heads. Press the Start button and Change View button at the same time to eject the card and restore the game. If this error occurs several times, use Test Mode to perform manual cleaning. (See 10- 3G.)
There is a problem with the card reader/writer. Please notify a store attendant. Please turn off the power and start again. This message is displayed when there is a problem with the Card Reader/Writer and it sends improper signals. Verify there are no problems with the shutter and that the top cover is closed and then restart the unit. (See 7-3.)
The card reader/writer is not responding. Please notify a store attendant. Check the card reader/writer is connected properly, turn off the power and start again. This message is displayed at power-up during advertisements when the Card Reader/Writer is not connected properly or when it is broken and unresponsive. Verify that the Card Reader/Writer is connected properly and then restart the unit. (See Section 24.)
SCIF Error. Please notify a store attendant. Check that the card reader/writer is connected properly, turn off the power and start again. This message is displayed when a communication error occurs between the Card Reader/Writer and the game board. Verify that the Card Reader/Writer is connected properly and then restart the unit. (See Section 24.) If this error occurs several times, check the immediate area for sources of possible interference.
Card jam. Remove the card and press the Start and Change View buttons. If the card cannot be removed, please notify a store attendant. This message is displayed when, various operations fail because of dirty rollers or heads.
This message is displayed when. a card jam is suspected when there should be no card in the Card Reader/Writer. Leave the card in place and press the Start button and Change View button to retry the operation. Remove the card and press the Start button and Change View button at the same time to restore or end the game (refer to 7-3). If this error occurs several times, use Test Mode to perform manual cleaning. (See 10- 3G.)
Press the Start button and Change View button at the same time after removing the card or correcting the problem to restore the game. (See 7-3.)
The following error messages are displayed when problems are detected during unit power-up (during initialization of the Card Reader/Writer). Perform the appropriate maintenance based on the content of the error message displayed. TABLE 16. 1b
ERROR DISPLAY CAUSE COUNTERMEASURES
CARD R/W ERROR! This message is displayed at power-up when the Card Reader/Writer is not connected properly or when it is broken and unresponsive. Verify that the Card Reader/Writer is connected properly and then restart the unit. (See Section 24). If broken, contact the company from whom the unit was purchased.
PLEASE INSERT CLEANING CARD. This message is displayed when the conditions prompting an automatic Card Reader/Writer cleaning are met. Perform the Card Reader/Writer cleaning. (See 7-2.)
This message is displayed during This message disappears once
to do so, the Card Reader/Writer is unable to eject a card for some reason.
This message is displayed at power-up when the shutter cannot be opened/closed properly. PLEASE WAIT network setup while the other unit initialization of the other network game is being initialized. unit is complete.
This message is displayed at Remove all cards from the Card CAN'T EJECT power-up when, after attempting Reader/Writer. (See 7-3.)
Verify that there are no problems with the shutter and then restart the unit. If this error occurs several times, contact the company from whom the unit was purchased.
The following messages are displayed when there are limits to the Card Reader/Writer Operation Mode. The messages are displayed in the upper right of the screen during advertisements. The message content is updated after the "SEGA LOGO" is displayed. If the message is not one displayed intentionally by the Operation Mode, perform the appropriate maintenance based on the content of the error message displayed.
TABLE 16. 1c
ERROR DISPLAY CAUSE COUNTERMEASURES
The machine is currently unable to issue new cards. Please see a store attendant to have the machine restocked with cards. The Card Reader/Writer Dispenser is empty (no cards). Restock the Dispenser with cards. (See 7-1) If no cards are available, contact the company from whom the unit was purchased.
Cards may not be used at this time. Cards may not be used due to the Store Closing setting being activated. If there is a mistake in the settings, use Test Mode to change the Store Closing setting. (See 10-3.) If the setting is correct, but not operating properly, check the internal clock settings on the game board (Refer to the Service Manual.)
16-2 TROUBLESHOOTING (WHEN NO ERROR MESSAGE IS SHOWN)
WARNING!
In order to prevent electric shock and short circuit, be sure to turn power off before performing work. Be careful so as not to damage wirings. Damaged wiring can cause electric shock or short circuit. After removing the cause of the functioning of the Circuit Protector, reinstate the Circuit Protector. Depending on the cause of the functioning, using the Circuit Protector as is without removing the cause can cause generation of heat and fire hazard. In the event that a problem cannot be resolved by employing the procedures listed in this Manual, be sure to request service from the office shown on this Manual or the dealer from whom the product was originally purchased. Attempts to employ procedures other than those specified in this Manual can cause electrical shock, shorting, or fire. In the event of a problem that is not described here, be sure to contact the office shown on this Manual or the dealer from whom the product was originally purchased. Careless attempts at repair can result in electrical shock, shorting, or fire.
Ifa problem occurs, first check to make sure that the wiring connectors are properly connected.
TABLE 16. 2
PROBLEM CAUSE COUNTERMEASURES,
| When the main SW is | The power is not ON. | Firmly insert the plug into the outlet. |
turned ON, the machine
| is not activated. | Incorrect power source/voltage. | Make sure that the power supply/voltage are |
correct.
The CIRCUIT PROTECTOR, After eliminating the cause of overload, have functioned due to momentary the Circuit Protector of the AC Unit restored. overcurrent. (See Section 6 4 , Refer to the following.)
The fuse of the connect board After eliminating the cause of overload, replace was blown out due to momentary the specified rating fuse. (Fig. 18. 2 b) overcurrent.
| Fluorescent lamp inside | Connector connection fault. | Check connector connections between the Cab- |
FL box doesn't light up. inet and the FL box.
Fluorescent lamp and Glow lamp need | Replace the fluorescent lamp and the glow replacement. lamp. (See Section16.)
CIRCUIT PROTECTOR
CIRCUIT PROTECTOR a”
Functions due to the activation of bimetal. To restore the function, wait for approximately one minute or longer until the bimetal cools off. (Press the FIG. 16.2 : “ Button.)
TABLE 16. 2
PROBLEM CAUSE COUNTERMEASURES
Sound is not emitted. Sound volume adjustment is not correct. Adjust the Switch Unit's sound adjustment volume . (See Section 10.)
Faulty connections for various connectors. Check the connections for the game board, amp, speakers and Volume connectors.
Malfunctioning BD, Amp. and Speaker. Perform SOUND TEST. (See Service Manual.)
Sounds are emitted and the lamps are lit, but the screen is black. Faulty connections for the visual signal connector or the monitor power connector. Check the connections for the monitor and game board connectors.
Broken monitor. Contact the company from whom the unit was purchased.
Colors on the monitor screen are strange. Faulty connection for the visual signal connector. Check the visual signal connector connection and make sure it is secured properly.
Screen adjustment is not appropriate. Make adjustment appropriately. (See Section 15.)
‘The on-screen image sways and/or shrinks. The power source and voltage are no correct. Make sure that the power supply and voltage are correct.
Does not accept input from any switch or volume. Faulty connector connections. Check the connection for the I/O Board and Cabinet connector.
Check the power for the I/O Board.
Does not accept input from the Shift Lever. Faulty connector connections. the Control Panel and between the Control Panel and the Cabinet.
Broken Microswitch. Replace the Microswitch (MICROSWITCH 509-5704).
STEERING (Servomotor) response is incorrect. Incomplete power on check. Power on and verify that the power on check completes properly. (See Section 6 5 .)
Deviation of the volume value. Adjust the volume value in the Test Mode. (See Section 10.)
Volume gear engagement fault. Adjust the engagement of the gear. (See Sections 10 & 11.)
Volume malfunctioning. Replace the volume. (See Section 11.)
Detached wires. Check for faulty wire connections around moving parts. When replacing wires, secure them so that they do not touch any moving parts.
TABLE 16. 2
PROBLEM CAUSE COUNTERMEASURES
No response from Steering (Servomotor). Failure of power-on checking procedure. Reconnect the power and complete a poweron checking procedure. (See Section 6 5 .)
Faulty connector connections. Check the connections for the connectors between the Game Board and Servodriver and between the Servodriver and the Servomotor.
Thermal element in the Servodriver is operating. Occurs when the internal temperature reaches 70°C (158°F) and corrects automatically when the unit cools.
Momentary overload caused a fuse on the Servodriver to blow. Contact the company from whom the unit was purchased.
Steering (Servomotor) is week in its force feedback. Aging of the force feedback mechanism. Reset in the Test Mode. (See Section10.)
Unsatisfactory Accel and Brake operation. Incorrect volume setting. Adjust the volume value in the Test Mode. (See Section 10.)
Faulty Volume attachment or adjust gear alignment. Adjust the volume attachment and verify in Test Mode. (See Sections 10 & 13.)
Faulty connector connection. Check the connections for the Accel and Brake connectors and the connectors between the Accel, Brake and Cabinet.
Failure of the volume. Replace the volume. (See Section 13.)
Start button and Change View button input does not work and they do not flash. Faulty connector connections. Check the connections for the connectors between the I/O Board, the Cabinet and the Control Panel and those inside the Control Panel.
Start button and Change
but they do not flash. View button input works, Unverified settings or operation. The Start button only flashes when Free Play is set. Check the operation in Test Mode. (See Section 10.)
The lamp is burnt out. Replace the lamp. (See Section 16.)
Failure of the network play. Network play is wrongly set. Reset correctly. (See Section 20.)
Communication cables are disconnected. Communication cables are wrongly connected. Reconnect the cables. (See Section 20.)
Damage of communication cables. Reconnect the cables correctly. (See Section 20.) Replace the cables. Contact the company from whom the unit was purchased.
REPLACING FUSES
A\
WARNING!
n case fuse replacements other than tl contact where you purchased the pro matter. Fuse replacements other than those sp strictly forbidden. n order to prevent an electric shock,
of the product. Be careful so as not to damage wiring: shock and short circuit accidents. ose stated in this manual are necessary, uct from for inquiries regarding this
ecified can cause accidents and are
e sure to turn power off and unplug from the socket outlet before performing work by touching the internal parts
s. Damaged wiring can cause electric
Be sure to use fuses meeting specifie: rating. Using fuses exceeding the specified rating can cause fire and electric shock accidents. After eliminating the cause of the blowing of fuse, replace the fuse. Depending on the cause of fuse blowing, continued use with the fuse as is lown can cause generation of heat and fire hazard.
- GAME BOARD
A\
WARNING!
AN
Static electricity from your body may damage some electronics devices on the IC board. Before handling the IC board, touch a grounded metallic surface so that the static electricity can be discharged.
17-1 REMOVING THE GAME BOARD
@ Follow the above described action to open cabinet
@ Remove all the connectors from the filter board on the Game Board. Also remove the GD cable connector from the DIMM board.
@ Remove the 4 screws that fix the Game Board.
__ SCREW (4) M4x16,w/flat & spring washers
Disconnect all connectors.
D-SUB connector
GD cable connector
FIG. 17.2
17-2 COMPOSITION OF GAME BOARD
ASSY CASE NAT TOF USA (840-0108D-01) ‘USA
TRUSS SCREW (1),chrome M385
. TRUSS SCREW (3),chrome P M3. re M3x50
ASSY CASE NAO COMMUNICATION BD '840-0001E
840-0108B
\ ASSY CASE NAT MAIN W/232C USA; 840-0046A-11 <USA>
FIG. 17.3
DIP SW SETTING
In this product, set all the DIP SW to OFF.
FIG. 19.3 b
- COMMUNICATION PLAY 18-1 SETTING FOR COMMUNICATION PLAY Change the game setting for each seat in a manner so as to meet communication play. If the setting is not correct, communication play cannot be played.
SETTING FOR COMMUNICATION PLAY @ Turn the linked machines' power on.
@ Cause all of the machines to enter the test mode. (10-3.)
@ Select the GAME ASSIGNMENTS.
e Perform the SEAT NUMBER setting in the GAME ASSIGNMENTS screen. Set one of the machines to "1" and the other to "2".
GAME TEST MODE
GAME ASSIGNMENTS
GAME DIFFICULTY NORMAL DEFALT VIEW DRIVER SEAT NUMBER 1 CARD R/W ON > EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
FIG. 18.3
@ Cause all of the machines to exit from the test mode. After the test mode, the screens proceed to and display the Network Check. @ When network checking is finished, the system displays Advertise Screen. This indicates successful completion of setting. If SEAT NUMBER setting is wrong, Network Check Screen appears, but it does not change to Advertise Screen. Normally the Network Check takes several 10 seconds. If the screen does not proceed from the Network Check screen, some sorts of errors such as incorrect setting, incorrect connection or malfunctioning of the communication cable can be considered. 18-2 NETWORK PLAY PRECAUTIONS
@ In network play, difficulty level and other settings are made from Seat Number |. Changing the settings at Seat Number | also changes the settings for Seat Number 2. Settings for Seat Number 2 cannot be changed from Seat
- Monitor Info
440" Plasma EOTV 1G tim sz cs aS SS Zz
DIT
640 x 480p Resolution High resolution format produces extremely detailed imagery Y 500:1 Contrast Ratio
Extremely sharp contrast between 370 cd/m’ High Brightness Renders an incredibly bright picture, even in well-lit areas
Aspect Ratio Correction Intelligent resizing of video and Intelligent Image Scaling Converts TV video data to PC formats without distortion or cropping images in either 4:3 or 16:9
NTSC, SD, VGA, and SVGA inputs Luminance Enhancement Automatically adjusts display brightness to ensure ideal contrast levels
Fan-Free Operation \ | light and dark images computer images to 16:9 wide- Compatible with DVD players, | \ screen or 4:3 conventional formats VCRs, computers, and traditional zenit i aa \ video sources ;
\—
replacement manual may be downloaded in PDF format from ww’ Tf you have lost your Original Owners manual which shipped with your Plasma display a enith.com .
P40V22 40" Plasma EDTV Monitor Display zenith
DIMENSIONS
REAR JACK PAN
| JACK PACK | VIDEO ENHANCEMENTS. | SPEGIAL FEATURES | |||
| HtRes Component Video | 1 | Screen Size | aw | ||
| ‘hula Left Right In/Loop Out | 2 | Resolution Display | 640x809 | “Tingua Menus | Englist/SpanisvFrench |
| Composite In | L | Pine Pitch | AIT (Hx 1252 0) | Shock Absorbing Gass Damper | Yes, ito 20° |
| RGB In (15-Fin ype-D Connecto | 1 | Aspect Ratio | 4B | fan Fee, Nise Free | es |
| Serial Control 25-Fin Connector) | 1 | Bightness | HOcaim | Auto-Power On | ves |
| Contrast Ratio | 500: | Discrete Power Of | ves | ||
| DIMENSIONS | Vining Angle | 160" | Last Source On | Yes | |
| Forel Gx 0) | SATE Kale | Format Conesion | Inteligent mages Scanning | Image Sticking Minimization | ves |
| Weight | eo lbs | Aspect Ratio Caecton | ves. | ™~ | |
| Serta | Tr | OUTPUT RESOLUTIONS | |||
| tain | = | NISCVGA | 640 480p | ||
| Brightness/Sharpness | Yes | E01 | 640 x 4809 | ||
| & | = | ‘OPERATING ENVIRONMENTS | |||
| = | Humidity Range | 20-80% | |||
| Display Frequency | 15:73 to 64H (H), | atta | eis | ||
| ACCESSORIES | 50 to 12044) | Operating Temperature | ware |
PE ves
| Displayable Colors | 167M | SEDIFED APPWOINY: | ||||
| Anti Retecton Screen | tes | Sm CaninT, | ts | UL, CL, NOM | UL C-UL Foo) | |
| ‘CABINET DESCRIPTION | Es Se | me Seas | SERVICE/LIMITED WARRANTY | |||
| Fish | Brasted Sher | spay ates | cea, | WAGE, Zoom | Warranty: Parts/Labor | Year Year |
| a | wet | Side Panels (Gray Bars for 4:3 Display) Yes (n 169), | BE pron | ania | ||
| vat Conigtie | Paty | Customer Senice | 1-888-866-3026, |
Power Source 15v 60k
RENOTE CONTROL “Transmitter Model Number S02 “Transmitter Finish Brushed Siver
>
Zenith Electronics Corporation w €
| 2000 Millbrook Drive, Lincolnshire, IL 60069 | Dimensions and weights are approximate, Design and specications | The lightning ‘2’ and Resolution Revolution are trademarks of |
| Web: yaw. zenith.com | subject to change witha notice. | Zenith Electronics Corporation. ©2002 Zenith Electronics Corporation |
Printed in the USA. 240220702
Your Zenith Plasma Display Warranty
Plasma Display Welcome to the Zenith family! We believe that you will be pleased with your new Zenith Plasma Display. Please read this warranty carefully, itis a “ONE-YEAR LIMITED WARRANTY" on parts and labor. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state within the U.S.A,
ZENITH’S RESPONSIBILITY
Service Labor During a period of one year from the effective warranty date, Zenith will provide, when needed, service labor to repair a manufacturing defect. The determination of service will be made by the Zenith Factory Service Center (see Service below).
New or remanufactured replacements for factory-defective parts will be supplied by the Zenith Factory Service Center for one year from effective warranty date. Such replacement parts are warranted for the remaining portion of the original warranty period.
During the one-year warranty period, Zenith will, at its option in its sole discretion, repair or replace defective parts, including replacement of the entire Plasma Panel, Please call 877-993-6484 to obtain service (see below).
Not Covered This warranty covers manufacturing defects and does not cover installation, adjustment of customer controls, installation or repair of antenna systems, cable converters or cable company-supplied equipment; it also does not cover damage due to misuse, abuse, negligence, acts of God or other causes beyond the control of Zenith. Any alteration of the product after manufacture voids this warranty in its entirety.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ZENITH SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, OR INCI- DENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS IN CONNECTION WITH THIS PRODUCT. SOME STATES DO NOT ALLOW LIMI- TATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
OWNER’S RESPONSIBILITY
Effective Warranty Date Warranty begins on the date of sale to the end user. For your convenience, keep the dealer's dated bill of sale or delivery ticket as evidence of the purchase date.
Operating Guide Read your Operating Guide carefully so that you will understand the operation of your Plasma Display and how to adjust the customer controls.
Warranty Service For warranty service information; contact the Zenith Customer Support phone line below. Parts and service labor that are Zenith’s responsibility (see above) will be provided without charge. Other service is at the owner's expense. If you have any problem in obtaining satisfactory warranty service, write the Zenith Customer Information Center. You must provide the model number, serial number and date of purchase or date of original installation. Before you ask for warranty service, read your operating guide. You might avoid a service call.
Address for Customer Information Center Zenith Customer Information Center PO Box 240007 201 James Record Road Huntsville, AL 35824 Attn: CIC Plasma Display, Bldg. 3
Phone number (toll free) 877-993-6484 (Follow prompts)
Hours of Operation: 7 a.m. - 8 p.m. Monday-Friday CST 8 a.m. - 5 p.m. Saturday CST
P/NO : 3840VA0026G@ © Copyright 2001 Zenith Electronics Corporation 206-3718-A
Monitor Installation
@ Remove screws from the stabilizer bar and turn it upside down. Reinstall the screws and the bar should appear as shown in the above figure. All the hardware for his setup will be mounted to its associated part provided in the installation kit or into existing T-Nuts on the game.
@ Remove control panel cover to gain access to uppermost bolts and install the vertical monitor support tubes.
@ Insure that the six tapped holes for mounting the rear cover are visible prior to securing the carriage bolts. There are two tapped holes on the opposite side of each tube for securing the front cover
@ Reinstall the plastic cover utilizing the original hardware and install the metal front cover with the four screws provided
Install the left and right monitor support brackets using the existing hardware ont eh back of the monitor. Up completion, also secure the spill guard to the top of the monitor using the monitor hardware.
Using the hardwarer provided, install the monitor back plate and the left and right U brackedts to the monitor support brackets installed in figure 5. Additionally, secure the two monitor control covers provided to the bottom on the monitor using the existing monitor hardware.
Mount the monitor with its associated brackets to the two tubes you installed earlier. Once secured, connect the two cables extending through the hole in the lower cabinet (Video & Power) to the appropriate inputs on the monitor. Insert any exscess cable back into the hole.
When the monitor is secured and the cables are tucked away, install the rear cover using the 6 tamper proff screws provided.
When the installation is complete the back of the game should appear as shown. Install the lock provided through the holes on the U- Brackets to provide additional security.
- DESIGN RELATED PARTS
999-1800 PLAY INSTRUCTIONS
999-1801 DECAL CONTROL PANEL
999-1805 DECAL SEAT BACK TOP
999-1802 DECAL CARD READER
999-1806 DECAL SEAT BACK MIDDLE
999-1803 DECAL LEFT MAIN 999-1804 999-1807 DECAL RIGHT MAIN DECAL SEAT, BACK BOTTOM
999-1808 DECAL BASE BOTTOM
999-1810 DECAL BASE RIGHT
- PARTS LIST
ITEM NO. PART NO. DESCRIPTION NOTE
| 1 | 601-11082 | Card Unit |
2 Monitor
| 3 | SPG-2200 | Assy Accel and Brake | |
| 4 | 999-0167 | Leg Leveler | |
| 5 | 999-0169 | Caster | |
| 6 | 999-1811 | Seat Back TOTDLX Blue Trans | |
| 7 | 999-1812 | Plastic Cabinet Hood | |
| 8 | 610-0408-91 | Up/Down Shifter AL | |
| 9 | Happ Controls | View Button | Happ#57-2000-62 |
| 10 | 999-1070 | Start Button | |
| 11 | TOF-2500 | Assy handle Mecha |
Card Unit Inital “D”
ITEM NO. PART NO.
1 601-11082 2 601-10952 3 253-5512 DESCRIPTION
Card Unit Magazine Card Guide
ASSY CONTROL PANEL (TOF-2000)
ASSY CONTROL PANEL (TOF-2000)
ITEM NO.
CIDKRWNHE PART NO.
601-11097 TOF-2500 TOF-2002 TOF-2010 601-11098 999-1070 HAPP CONTROLS
610-0408-91 DESCRIPTION NOTE
STEERING WHEEL 340 ASSY HANDLE MECHA HANDLE COLLAR STICKER STEERING EMBLEM STEERING EMBLEM 340 START BUTTON Happ#57-2000-355 VIEW BUTTON Happ#57-2000-62
UP/DOWN SHIFTER AL
(7) Plated yellow
Plated black YD ce se £Y ; (After instal ing @) (oi ae a) God) 44 (208 20, 2 18)
Fastening Torque:
M3: 0.74N.m.M4: 1.8N.m.M6: 5.6N.m.M8: 17.4N.m ASSY HANDLE MECHA (TOF-2500)
ASSY HANDLE MECHA (TOF-2500)
ITEM NO. PART NO. DESCRIPTION NOTE
| 1 | TOF-2501 | MECHA BASE |
| 2 | TOF-2502 | MECHA BASE LID |
| 3 | TOF-2503 | HANDLE SHAFT |
| 4 | TOF-2504 | SPACER COLLAR A |
| 5 | TOF-2505 | STOPPER BLOCK A |
| 6 | TOF-2507 | SPACER COLLAR B |
| 7 | TOF-2508 | STOPPER PIN SS |
| 8 | TOF-2509X | STOPPER RUBBER SS |
| 9 | SPG-2505 | PULLEY 60 SSM |
| 10 | DYN-1270 | STOPPER KEY |
| ll | TOF-2510 | SPACER COLLAR C |
| 12 | TOF-2511 | STOPPER HOLDER |
| 13 | TOF-2512 | STOPPER RUBBER |
| 14 | TOF-2513 | STOPPER BOLT |
| 15 | TOF-2514 | VR BRKT |
| 16 | TOF-2515 | GEAR HOLDER |
| 17 | 601-6172 | GEAR 48 |
| 18 | SPG-2504 | PULLEY 20 SSM |
| 19 | SPG-2506 | MOTOR BRKT |
| 20 | SPG-2453 | KEY 4%4x40 |
| 21 | SPG-2454 | MOTOR SHAFT COLLAR |
| 22 | ASK-3502 | MOTOR SPACER |
| 23 | ASK-3503 | MOTOR COLLAR |
| 101 | 350-5448-01 | SERVO MOTOR 500W NEW |
| 102 | 220-5484 | VOL CONT B-SK OHM |
| 103 | 310-5029-F20 | SUMITUBE F F 20MM |
| 104 | 601-11089 | TIMING BELT (150 SSM 520) |
| 105 | 100-5168 | BEARING 20 (NSK 6904ZZ) |
| 106 | 100-5285 | BEARING 20(6804ZZ) |
| 201 | 028-A00408-P | SET SCR HEX SKT CUP P M4x8 |
| 202 | 030-000820-S | HEX BLT W/S M8x20 |
| 203 | 065-S012S0-Z | STP RING BLK OZ S12 |
| 204 | 000-P00410-W | M SCR PH W/FS M4x10 |
| 205 | 030-000612-S | HEX BLT W/S M6x 12 |
| 206 | 060-F00600 | FLT WSHR M6 |
| 207 | 030-000840-S | HEX BLT W/S M8x40. |
| 208 | 068-852216 | FLT WSHR 8.5-22 1.6 |
| 209 | 050-U00800 | U NUT M8 |
| 210 | 060-F00800 | FLT WSHR M8 |
| 211 | 020-000612-0Z | HEX SKT H CAP SCR BLK 0Z M6x12 |
| 212 | 060-S00600 | SPR WSHR M6 |
ASSY ACCEL&BRAKE (SPG-2200)
(eo)
ASSY ACCEL&BRAKE (SPG-2200)
ITEM NO. PART NO. DESCRIPTION NOTE
| 1 | SPG-2201 | BASE |
| 2 | SPG-2202 | ACCEL PEDAL |
| 3 | SPG-2203 | BRAKE PEDAL. |
| 4 | SPG-2204 | ACCEL SPRING |
| 5 | SPG-2205 | BRAKE SPRING |
| 6 | SPG-2206 | SHAFT |
| 7 | SPG-2207 | ACCEL GEAR |
| 8 | SPG-2208 | BRAKE GEAR |
| 9 | SPG-2209 | NEUTRAL STOPPER |
| 10 | SPG-2210 | VR PLATE ACCEL |
| ll | SPG-2211 | VR PLATE BRAKE |
| 12 | SPG-2212 | AMPL GEAR |
| 13 | SPG-2213 | GEAR SHAFT |
| 14 | SPG-2214 | STOPPER |
| 15 | SPG-2215 | RUBBER CUSHION |
| 16 | SPG-2216 | COVER |
| 17 | SPG-2217 | VR COVER |
| 19 | SPG-2219 | GEAR STAY |
| 20 | SPG-2220 | WSHR |
| 21 | SPG-2221 | NEUTRAL STOPPER D |
| 101 | 100-5263 | BEARING 12(OILES 80F-1212) |
| 102 | 220-5484 | VOL CONT B-SK OHM |
| 104 | 601-7944 | GEAR 15 |
| 105 | 310-5029-F15 | SUMITUBE F FISMM |
| 106 | 280-0419 | HARNESS LUG |
| 201 | 028-A00304-P | SET SCR HEX SKT CUP P M3x4, |
| 202 | 020-000520-0Z | HEX SKT H CAP SCR BLK MSx20 |
| 203 | 000-P00420 | M SCR PH M4x20 |
| 204 | 000-P00508-W | M SCR PH W/FS M5x8 |
| 205 | 000-T00408-0C | M SCR TH CRM M4x8 |
| 206 | FAS-450005 | SPR PIN BLK OZ 6x10 |
| 207 | 000-P00405 | M SCR PH M4x5 |
| 208 | FAS-000001 | M SCR TH CRM M3x6 |
| 209 | 050-H00500 | HEX NUT MS |
| 210 | 060-F00400 | FLT WSHR M4 |
ASSY SEAT
Oo \ ENT A
OW]
ASSY SEAT
ITEM NO. PART NO.
999-1811 DUT-2202 DUT-2203 TOF-1601 STC-1604 STCC-00781 FRI-3307 NCR-2406 INY-1302-B STC-1607 STC-1608 STC-1609 TOF-1604
130-5186-91 280-5297
000-P00410-W 030-000850-S 030-0008 16-S 000-T00408-0B 050-H00800 060-S00800 068-852216 012-P00412 060-F00400 DESCRIPTION NOTE
SEAT BACK TOTDLX BLUE TRANS UPPER SEAT LOWER SEAT SEAT BASE SEAT FRAME(2) SEAT TURTLE FRONT TRAY COVER REAR TRAY COVER MASK CUSHION SIDE SP MOUNT BRKT SPEAKER NET L SPEAKER NET R NET COVER SH
DUMMY SPEAKER SCRIVET 8 1K31
M SCR PH W/FS M4x10 HEX BLT W/S M850. HEX BLT W/S M8~ 16 M SCR TH BLK M4x8 HEX NUT M8 SPR WSHR M8 FLT WSHR 8.5-22 1.6 TAP SCR #2 PH 4x12 FLT WSHR M4
ASSY MAIN BD
ITEM NO.
ee PART NO.
998-0192 840-0091D-11 837-13551-92 XKT-0833 998-0191 998-0138 838-13578 838-14174 400-5421-07512 400-5397-01 DESCRIPTION NOTE
Lamp Controller Tivoli AM.Light #Con3-24/3 Assy Case Nat RT/232C &Com USA <USA> W/O Control Board for JVS Kit GDROM Drive Transformer Signal #A41-43-24 24VCT XMER 100-120v 100V7.5A. Power Amp 2ch+Mixer Servo Motor Drive Board Mini SW REGU Power Supply
ASSY SPEAKER R (APC-1565)
ITEM NO. PART NO. DESCRIPTION NOTE
1 APC-1561 SPEAKER BRKT
101 130-5156-01 SPEAKER BOX 80HM 20W VAI
201 000-P00512-W M SCR PH W/FS M5x12
ASSY SPEAKER L (APC-1560)
2 / /
/ / / /
/ /
°
ITEM NO. PART NO. DESCRIPTION NOTE
| 1 | APC-1561 | SPEAKER BRKT |
| 101 | 130-5156-01 | SPEAKER BOX 80HM 20W VAI |
| 201 | 000-P00512-W | M SCR PH WIFS M5x12 |
- WIRE COLOR CODE TABLE
THE WIRE COLOR CODE is as follow:
moawpe PINK.
SKY BLUE
BROWN
PURPLE
LIGHT GREEN
Wires other than those of any of the above 5 single colors will be displayed by 2 alphanumeric characters.
e2IYIKWRwWNe RED
BLUE
YELLOW
GREEN
WHITE
ORANGE
BLACK
GRAY
If the right-hand side numeral of the code is 0, then the wire will be of a single color shown by the left-hand side numeral (see the above).
<Example> 51 WHITE / RED
RED WHITE
The character following the wire color code indicates the size of the wire.
U: AWGI16
K: AWGI18
L: AWG20
None: AWG22
Warranty
Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.
Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor.
n ould the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.
Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.
This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above.
SEGA AMUSEMENTS USA, INC.
45133 Industrial Drive Fremont, CA 94538 (415) 701-6580 phone (415) 701-6594 fax