CATHODE RAY TOMES

Special Criminal Investigation Operating Manual

Special Criminal Investigation (World set 1) (Taito Corporation Japan, 1989) · Operating Manual · 28 pages · 11 sections · original scan

Page 1

TAITO AMERICA CORPORATION

S. C.. Ps ™

OPERATING MANUAL

“he” ay

660 S. Wheeling Road | Wheeling, IL 60090 Telephone (708) 520-9280 Fax (708) 520-1309

Page 2

SPECIFICATIONS

POWER SUPPLY 120 VAC (60Hz)

POWER CONSUMPTION 250 WATTS

TV MONITOR 19" COLOR RASTER

DIMENSIONS 25 1/2"W x 37"D x 72 1/2"H

TABLE OF CONTENTS Page Numbers

GAME INSTALLATION .........eeeeeeceee Dec e eee eee cece e ee eene 2

CABINET ILLUSTRATIONS ...... cece cece erence cece ence cece ecees 3 - 6

GAME OPERATION & PLAY INSTRUCTIONS . 2. 7

SELF-TEST MODE ..ccccccccccccccccccccccccecccsccncccercescccce 8 - 10

SERVICE ACCESS DRAWER AND POWERHOUSE ASSEMBLY ........-.+-2ee05 11 - 14

OPTION DIP-SWITCH SETTINGS ....ccecceccecceccerccccccccccccces 15 - 16

SUB-ASSEMBLY ILLUSTRATIONS & PARTS IDENTIFICATION ............ 17 = 25

  • WARNING *

THIS GAME MUST BE PROPERLY GROUNDED. FAILURE TO DO SO MAY RESULT IN DESTRUCTION TO THE ELECTRONIC COMPONENTS.

  • ATTENTION *

THE COPYRIGHTED VIDEO GAME THAT ACCOMPANIES THIS MANUAL CARRIES WITH IT A ROYALTY FREE, NON-EXCLUSIVE LICENSE FROM THE COPYRIGHT OWNER TO THE OWNER OF THE VIDEO GAME TO PUBLICLY PERFORM THE COPYRIGHTED VIDEO GAME IN THE UNITED STATES OF AMERICA, CANADA, AND MEXICO. THIS PUBLIC PERFORMANCE LICENSE ATTACHES AND APPLIES ONLY TO THE PHYSICAL EMBODIMENT OF THE VIDEO GAME THAT ACCOM- PANIES THIS MANUAL. THIS PUBLIC PERFORMANCE LICENSE MAY ONLY BE TRANSFERRED TO THE SUBSEQUENT OWNER(S) OF THE PHYSICAL EMBODIMENT OF THE VIDEO GAME THAT ACCOMPANIES THIS MANUAL.

ae

Page 3

I. GAME INSPECTION

S.C.I. has been thoroughly tested and readied for operation at the factory and should not require any special set-up procedure. However, it is suggested that upon receiving your game you examine the following to further insure the game is in proper working condition:

CHECK:

Plug-in connectors are firmly seated. All player control connections are complete. No loose components on the printed circuit boards. Fuses are installed firmly in holders. Coin mechanisms are operating properly. No loose foreign objects in cabinet (screws, components, etc.) which may cause shorting and result in damage to the game.

If problems do occur or technical assistance is required, please call our Customer Service Department at 708/520-9280.

II. POWER REQUIREMENTS

The game is shipped ready for operation at 120VAC, 60Hz with a power consumption of approximately 250 watts.

CAUTION

FOR SAFE OPERATION IT IS STRONGLY RECOMMENDED THE CABINET BE PROPERLY GROUNDED. THIS GAME IS EQUIPPED WITH A THREE CONDUCTOR POWER CABLE. THE THIRD PRONG (round in shape) WILL AUTOMATICALLY GROUND THE GAME WHEN PLUGGED INTO A PROPERLY GROUNDED THREE PRONG RECEPTACLE. IF IT BECOMES NECESSARY TO USE AN ADAPTER, THE GROUNDING LUG OR WIRE ON THE ADAPTER MUST BE PROPERLY GROUNDED TO ASSURE SAFE OPERATION.

III. GAME INSTALLATION

The following precautions should be followed when installing the game:

  • Handle the game with care so as not to damage the fragile picture tube.
  • Do NOT install the game in direct sunlight or near a heat source. Doing so might cause the internal temperature of the game to exceed it’s maximum operating temperature and could result in damage to the game’s components.
  • Do NOT install the game in excessively dusty or damp environments.
Page 4

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 5

NN CABINET FRONT VIEW PARTS LIST

DESCRIPTION PART NO.

Page 6

Vv: CABINET

Page 7

CABINET REAR VIEW PARTS LIST

6 COLOR MONITOR, DESCRIPTION

19 INCH

Page 8

IV. GAME INSTRUCTIONS

S.C.I. is a fast-action driving game in which the player pursues wanted criminals. The player must race against time through city back-roads, country dirt-roads and the winding curves of a mountain side. He must use skill in maneuvering around such dangers as falling rocks, opened bridges and even the crashing of waves onto an ocean-front highway. A vibrating steering wheel enhances the experience by simulating the feeling of driving over rough terrain.

  • The controls include a vibrating steering wheel, a gun/turbo shifter combination and a three position accelerator pedal for speeding, coasting and braking.
  • The player drives a high speed car in pursuit of the criminal’s car or target vehicle.
  • A scale indicating the distance to the target vehicle is shown on the right side of the screen.
  • While in pursuit, a timer counts down the time given to catch up to the target vehicle.
  • Before the player can apprehend the criminal, he must first fight off a criminal gang of motorcyclists by bumping them off the road.
  • When the player is in range of the target vehicle, the timer resets to give the player more time, a siren sounds and an arrow appears to identify the target vehicle.
  • Using two methods, ramming into and shooting, the player cripples the target vehicle.
  • When shooting, a gunsight appears to assist the player in aiming accurately.
  • A scale indicating the amount of damage to the target vehicle appears on the left side of the screen. ENGINE HIGH SCORE TIMER R.P.M.’S. PLAYER'S SCORE HI SCORE 2662380 SPEED SCORE ST-1 speed OOO mPH

DAMAGE bieunce

STAGE #

DAMAGE TO DISTANCE CRIMINAL'S FROM THE CAR. PLAYER'S CAR TO THE CRIMINAL'S CAR.

CREDIT o

TURBO REMAINING TURBO'S NUMBER OF CREDITS

Page 9

Vv. GAME PCB ADJUSTMENTS ~~

B Qa

SOUND VR

DIP SWITCHES

VI. SELF-TEST MODE

A. TO ENTER THE SELF-TEST MODE

  • Turn power OFF.
  • Locate Dip Switch Bank A on the main logic PCB and slide switch #3 to the ON position.
  • Turn power ON.

The game will automatically conduct a test of its rom and ram memory and indicate if a problem is found.

  • ROM/RAM & COLOR MONITOR TEST - This screen is the first to appear in the self-test mode.
  • SWITCH/FUNCTION TEST MODE - Press the START button to enter this test.
Page 10

TV MeN OR

B. ROM/RAM & COLOR MONITOR TEST

  • During the first stage of this test, the game conducts a self-test of its ROM and RAM memory and indicates if a problem is found.
  • During the second stage of this test, the screen displays a color bar and crosshatch pattern to assist in adjusting the color monitor.

D. SWITCH/FUNCTION TEST MODE

  • Press each game control switch to test. While depressed, the corresponding display for that switch will change from OFF to ON. This indicates the switch is operating properly.

TEST MODE

COIN A:OFFCOIN B:OFF
SERVICE: OFFTILT:OFF
ACCEL:OFFSHIFT:OFF
BRAKE:OFFTURBO:OFF

START: OFF . GUN: OFF

HANDLE:OFFCENTER:OFF

87654321 DIP SW A: HHH HHLUHH L: ON DIP SW B: HHH HHHHH H: OFF SOUND CODE: 00

RAM OK

Page 11
  • To test the game sounds, rotate the steering wheel to the right or left until the desired sound address appears next to the SOUND CODE display. Then press the START button to activate that sound.

E. TO EXIT THE SELF-TEST MODE

  • Turn Power OFF.
  • Locate Dip Switch Bank A on the main logic PCB and return switch #3 to the OFF position.
  • Turn Power ON.
Page 12

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 13

SERVICE ACCESS DRAWER ASSEMBLY PARTS LIST

KEY DESCRIPTION REF NO.

3 F.C.C. FILTER PCB

Page 14

ATGNASSY ASNOHAAMOd

Page 15

w POWERHOUSE ASSEMBLY PARTS LIst

POWER SUPPLY, 10 AMP SWITCHING

FUSE, 3 AMP, 125VAC

TRANSFORMER, AUXILARY, 11VAC/18VAC

TERMINAL BLOCKS, 9 POSITION

LINE FILTER, 10 AMP PART NO.

900-600201

Page 16

OPTION DIP SWITCH SETTINGS

The following option switch settings were designed to allow the customizing of S.C.I.’s various game features to suit different environments. If used wisely, the flexibility they offer can maximize game performance and increase potential earnings.

DIP SWITCH A | FUNCTION | SETTING | 1 |

COCKPIT spiel

MUST REMAIN IN "OFF" POSITION

TEST MODE *NORMAL TEST

ATTRACT SOUNDS *ENABLED DISABLED

PLAY PRICING

CONTINUE PRICING

  • = FACTORY RECOMMENDED SETTINGS.

CONTINUE PRICING - THIS SWITCH ALLOWS YOU TO PRICE THE "CONTINUED" GAME DIFFERENTLY THAN THE INITIAL GAME. AN EXAMPLE WOULD BE AN OPERATOR WHO ALLOWED HIS PLAYERS TO CONTINUE AT A DISCOUNTED RATE. EXAMPLE: PLAY PRICING IS SET AT (2 COINS = 1 PLAY) AND THE CONTINUE PRICING AT (1 COIN = 1 PLAY). THE PLAYER PAYS THE FULL AMOUNT (2 COINS) TO BEGIN PLAYING, THEN PAYS ONLY HALF AS MUCH (1 COIN) TO CONTINUE HIS GAME. WHEN THE CONTINUE PRICING IS SET AT "SAME PRICING", THE CONTINUED GAME IS PRICED THE SAME AS THE INITIAL GAME.

Page 17

[__ FUNCTION | SETTING BiH ee Eee ae

*B - MEDIUM DIFFICULTY A - EASY LEVEL C - HARD D - HARDEST

*60 SECONDS INITIAL 70 SECONDS TIMER 65 SECONDS 55 SECONDS

NUMBER OF TURBOS

STEERING 270 DEGREE RADIUS *360 DEGREE

CONTINUE PLAY | *NO WITH DAMAGE YES

SIREN *NORMAL VOLUME Low

  • = FACTORY RECOMMENDED SETTINGS.
Page 18

FLUORESCENT LAMP & SPEAKER ASSEMBLY

DESCRIE TION

Page 19

GAS PEDAL ASSEMBLY \ PARTS LIST

Page 20

) KTIGNaSsY THSaHM ONTUAALS

Page 21

a STEERING WHEEL ASSEMBLY PARTS

il LIST

DESCRIPTION

KEY, WOODRUFF

LOCKWASHER, M12

SOCK, HD. CAP SCR. M6 X 15

CLUSTER GEAR & SHAFT 31 & 14 T, 1 MOD

GEAR & SHAFT, 14 T, 1 MOD.

ENCODER DISC, PLAT. 24 SLOT

PHIL. HD. MACH. SCR. M4 X 6 PART NO.

Page 22

STEERING WHEEL ASSEMBLY PARTS LIST (CONT. )

BRACKET, ENCODER

P.C. BOARD ASSY.

LOCKWASH, EXT. STAR, #4

ECCENTRIC SHAFT ASSY.

BUSHING, ECC. SHAFT

COUPLING

GEAR MOTOR

HEX HD. MACH. SCR. 10-32 X 1/2

SUPP. COLUMN, LONG

SUPP. COLUMN, SHORT

PHIL. HD. MACH. SCR. 10-32 X 3/4

WASHER? #10 SAE

Se Nem

Page 23

STEERING WHEEL ASSEMBLY PARTS LIST (CONT.)

DESCRIPTION REF NO. PART NO.

Page 24

GUN/SHIFTER ASSEMBLY

Page 25

GUN/SHIFTER ASSEMBLY PARTS LIST

KEY DEGCREPELON REF NO. PART NO.

Page 26

GUN/SHIFTER ASSEMBLY PARTS LIST (CONT.)

Page 27

Notes

Page 28

TAITO

TAITO AMERICA CORPORATION 660 S. Wheeling Road Wheeling, IL 60090 Telephone (708) 520-9280 Fax (708) 520-1309