CATHODE RAY TOMES

Street Fighter II-CE

Street Fighter II': Champion Edition (World 920513) (Capcom, 1992) · Manual · 8 pages · 13 sections · original scan

Page 1

INSTRUCTION MANUAL

CAPCOM U.S.A.

Page 2
WARNING

THIS GAME MUST BE GROUNDED. FAILURE TO DO SO MAY RESULT IN DESTRUCTION TO ELECTRONIC COMPONENTS.

WARNING: This equipment generates, uses and can radiate radio frequency energy and if not used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a CLASS A computing device pursuant to SUBPART J and PART 15 of FCC RULES, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference.

“WINNERS DON’T USE DRUGS”

William S. Sessions, Director, FBI

*IN COOPERATION WITH THE AAMA AND FBI ANTI-DRUG CAMPAIGN*

CAPCOM, USA INC.

INVITES YOU TO USE

OUR SERVICE NUMBER FOR SERVICE INFORMATION CONCERNING THIS GAME, OR ANY OTHER CAPCOM GAME YOU NOW HAVE ON LOCATION. PLEASE HAVE GAME SERIAL NUMBERS AND CABINET NUMBERS READY.

CALL US FOR PROMPT, COURTEOUS ANSWERS TO YOUR PROBLEMS

ANSWERS TO YOUR PROBLEMS.

Direct Number (408) 727-0400

Page 3

WARRANTY, REPAIR AND RETURN POLICY

REPLACEMENT PARTS: CAPCOM USA maintains a stock of replacement parts for our products. When placing an order for parts, please supply a complete description of the item, quantity required, P.O. number and shipping information. We attempt to ship items the day they are received, orders received after 12:00 noon will ship the following work day. We do have a minimum order requirement at this time, and we certainly appreciate your efforts to consolidate your orders whenever possible.

Payments Terms are NET 30.

RETURN MATERIAL AUTHORIZATIONS:

Material can be returned to CAPCOM only in the following situations:

  • Parts, return for credit. A parts order was processed incorrectly, ie; wrong items were shipped, wrong quantity was shipped, etc.
  • PCB, return for credit. A PCB is being returned for credit to satisfy an Advantage Exchange transaction.
  • Other, parts are being returned for engineering analysis, etc, only with prior consent of Customer Service or Sales Department. To obtain a Return Material Authorization, please contact CAPCOM Customer Service Department. Describe the transaction and request an RMA number. The outside of the package must be clearly marked with the RMA number. Packages not displaying an RMA number will be returned un-opéned.

WARRANTY REPAIRS:

During the initial 60-day warranty, customers whose accounts are current are eligible for an Advance Exchange PCB. When calling for an Advance Exchange PCB, please supply a complete description of the item needed, number for warranty verification, P.O. number and shipping information. You will be issued an RMA number for the return of the defective PCB.

LIMITED WARRANTY

CAPCOM warrants only to the initial purchaser of its products that the items listed below are free from defects in material and workmanship under normal use and service for the warranty periods specified:

A.Printed Circuits Boards(60) Days (C.P.S. Chip)
B.Electronic Components(30) Days
C.Television Monitors(30) Days

No other parts of products are warrantied. Warranty periods are effective from the initial date of shipment from CAPCOM to it's authorized distributors. This warranty does not apply to any parts damaged during shipping or handling, or due to improper installation or usage or alteration. In no event shall CAPCOM be liable for any anticipated profits, loss of profits, loss of use, incidental or consequential damages or any other losses incurred by the customer in connection with the purchase of CAPCOM products. Terms for Advance Exchanges are NET 15. If the defective PCB is not returned within 30 days, no additional Advance Exchanges will be issued until the offending PCB is returned or the invoice is paid in full. If the PCB is not returned until after 90 days, the warranty will be voided and the customer will be liable for all repair charges. Each transaction not more than one set PCB. It is our goal to constantly improve and better our services to you. Your Cooperation with the above stated policies will help us greatly to reach this goal. If you have any comments or questions, please telephone our Customer Service Department. We will make every attempt to tailor our services accordingly.

*Each customer cannot withhold Advance Exchange more than two set PCB at the same time and same item.

Page 4

DIP SW (A)

DESCRIPTION

1 COIN 1 CREDIT [ OFFOFFOFF
1 COIN 2 CREDITS]ONOFFOFF
1 COIN 3 CREDITS] OFFONOFF
COIN 11 COIN 4 CREDITS|ONONOFF
1 COIN 6 CREDITS[OFFOFFON
2 COINS 1 CREDIT]ONOFFON
3 COINS 1 CREDIT]OFF‘ON‘ON
4 COINS 1 CREDIT|_ONONON
1 COIN 1 CREDITOFFOFFOFF
1 COIN 2 CREDITSONOFF | OFF
1 COIN 3 CREDITSOFFONOFF
COIN 21 COIN 4 CREDITSONONOFF
1 COIN 6 CREDITSOFFOFFON
2 COINS 1 CREDIT‘ONOFF‘ON
3 COINS 1 CREDIT)OFFONON
4 COINS 1 CREDITONONON

NORMAL, OFF

CONTINUE COIN T~CONTINUE GOIN ‘ON

  • WHEN CONTINUE IS ON, GAME STARTS WITH 2 COINS AND CONTINUES WITH 1 COIN. IN THIS CASE, SETTINGS OF COIN 1 AND COIN 2 ARE MEANINGLESS.
  • BOLDFACE INDICATES FACTORY SETTING.

DIP SW (B)

ITEM[DESCRIPTION12345
EASY0|OFF | OFF | OFF
+1[_ONOFF | OFF
42[lore | ON | OFF.
3[ON‘ONOFF
DIFFICULTYNORMAL4|—Ore | oFFON

Y 5 ON OFF ON

6 |_ OFF‘ON‘ON
DIFFICULT_7[ON‘ON‘ON
  • DIFFICULTY LEVEL IS SET TO NORMAL AT THE TIME OF DELIVERY.
  • BOLDFACE INDICATES FACTORY SETTING.

DIP Sw (C)

TEM DESCRIPTION FREE PLAY NOT FREE PLAY FREE PLAY | SCREEN STOP NOHMAL PAUSE | SCREEN FLIP NORMAL. FLIP SOUND DURING | DEMONSTRATION OFF MODE" ‘ON OFF INTINUE MODI |co JODE oe GAME MODE TEST MODE TEST MODE

  • BOLDFACE INDICATES FACTORY SETTING.
  • POWER DOWN AFTER CHANGING DIP SWITCHES.
  • MAKE SURE THE POWER IS OFF BEFORE CHANGING DIP SWITCHES.
Page 5

HELPFUL HINTS IN CASE OF DIFFICULTY

No Raster/No Video

Raster/No Video PROBLEM/CAUSE-CURE

-Check A.C. line cord -Check line fuse -Check monitor brightness -Check power switch and/or interlock switch -Check all solder connections on line filter and transformer -Check for proper orientation of the PCB connector

-Check all PCB to monitor connections -Check power supply voltage on PCB

No Video/Game sounds can be heard

Wrong Colors

Wavy Picture

Horizontal/Vertical Roll

No Sound

Bad Sound

No Switch Input -Check monitor brightness -Check all PCB to monitor connections

-Monitor needs degaussing -Check for proper wiring between PCB and monitor -Check monitor adjustment and adjust if necessary

-Check monitor ground is properly connected to monitor -Be certain sync inputs are properly connected to monitor -Check horizontal hold adjustment

-Check horizontal and/or vertical hold adjustments -Check for proper wiring of sync from PCB to monitor

-Check for —5 volts on edge connector of PCB -Check volume control potentiometer adjustment -Check for +12 volts on edge connector of PCB -Check wiring from PCB to speaker -Check speaker for low resistance between the ‘‘+’’ and ‘‘—”’ tabs

-Check wiring to speaker for bad solder connections -Check sound with another speaker

-Check ground connection to switch/es -Check’ wiring between PCB and switch/es for proper connection -Check switch/es with an ohmmeter to verify proper operation Switch Operates Incorrect Function

No Coin Meter -Check wiring between PCB and switches for proper orientation -Check wiring for shorts between switch inputs

-Check wiring to coin meter -Check that +5 volts is on “+” side of meter -Verify a +5 volt meter is used

When coin switch is made and meter pulses, the screen blanks out and/or game resets -Verify that a meter with a diode is used -If no diode is built in meter, a IN4004 can be used across the meter. Cathode to “+’’ side of meter and anode to ‘‘—”’ side of meter

Page 6

CONTROL PANEL POSITIONS

8 WAY JOYSTICK 8 WAY JOYSTICK

a ara POSSIBLE 1 & 2 PLAYER LOCATIONS

PCB CONNECTOR

JAMMA STANDARD

© CRT MONITOR

HORIZONTAL SCREEN

  • CONTROL PANEL

—— Puncu

LIGHTMIDDLEHEAVY
GOGOGCOo

MOVE MOVE

LEFT {e} RIGHTOOoCD

8-Way ick LIGHT MIDDLE HEAVY

Moves player to Up/Down ——— nex Left/Right & other directions

  • POSITIONS OF DIP SW (There are 2 types of PCB)

1.

A (43 _] ~__DIPSW(A) ~__DIP swe) c [43] ~__DIPswc) o &

VOL JAMMA fA O

B > DIP SW (A)

fal DIP SW (B)

b| 7 a DIP SW (C) <_— °

VOL

Page 7

HOW TO CONNECT THE ATTACHED JAMMA STANDARD HARNESS LINES SOLDER SIDE COMPONENTS SIDE

sO™~GNDGND

Lb GND GND

+5V +5V +5V +5V NC. NC. A B c D E F H COIN COUNTER 2 | J COIN COUNTER 1 ony (COIN Lock our 2) | K (COIN Lock OUT 1)

sP(-)|LSP (+)

nec. | M NC. VIDEO GREEN | N VIDEO RED VIDEO SYNC | P VIDEO BLUE SERVICE SW | R VIDEO GND Ne. | $ TEST SW

90632C-1COIN sw2|TCOIN SW 1
START sw2|USTART SW 1

2P uP | V 1P UP 1 41 61 10 1 10

ui 022P DOWN | W1P DOWN

2p Lert | x 4P LEFT 2P RIGHT | Y 1P RIGHT 2P PUSH 1 | Z 4P PUSH 1

10 PIN2P PUSH2|a1P PUSH 2
ano[7 | BLACK2p PUSH 3|b1P PUSH 3

GND | 2 | BLACK

1P KICK LIGHT | 3 | PURPLENC. | ¢N.C.

1P KICK MIDDLE | 4 | GRAY

1P KICK HEAVY | 5 | WHITENC. | 4e

Nc. | 6 GND | e 2P KICK LIGHT | 7 | ORANGE

2P KICK MIDDLE | 8 | GREENGND | fGND

2P KICK HEAVY | 9 | BLUE Nc. | 10 © PARTS NAME (CR7E-56DA-3.96E: (HIROSE) OR 1168-056-009 (KEL)

Page 8

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.