All American Football
All American Football (Leland, rev E) (Leland Corporation, 1989) · Manual · 35 pages · 44 sections · original scan
SAL AMER Lan
Your Responsibility For Maintenance
Ik is the owner's responsibility to make sure that the specified maintenance is performed. The Troubleshooting Section gives details of these maintenance requirements. Also included in the Troubleshooting Section is information regarding other requirements for games operated under severe playing conditions.
Purchase Date:
Distributor: | Serial Numbers
Written and Illustrated by: Team Leland
Part Number - 72-13606-24
Foreword
Welcome to the growing group of value conscious people who operate Leland Corporation products. We are proud of the advanced engineering agealiy of each game we build. We invite you to read through this Owner’s Manual. Ie designed to acquaint you with the features of your new "All-American Football” and to help you enjoy many quarters of earning pleasure.
When it comes to service, remember that your authorized Leland distributor knows your game best and is interested in your complete satisfaction. He will provide quality parts, service, and any other assistance you may require.
The Leland Corporation
Please leave the Owner’s Manual in this game at the time of resale. The next owner will also need this information.
All information and specifications in this manual are current at the time of printing. However, because of The Leland Corporation’s policy of continual product improvement, we reserve the right to make changes at any time without notice.
Non-Leland Replacement Parts Notice
The Leland Corporation recommends the use of only Leland Corporation parts when replacing any malfunctioning component or assembly in your video amusement machine. For safety and reliability, The Leland Corporation does not recommend or authorize any substitution parts or modifications of Leland equipment. Such alterations may adversely affect game play or cause serious injury, and will void your warranty. Unauthorized parts and/or modifications may also void FCC compliance.
FCC Warning
This equipment generates, uses, and can radiate radio frequency energy and if not installed in accordance with the Owner’s Manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a class "A" computing device pursuant to subpart "J" of part 15 of the FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user, at his own expense will be responsible to correct the interference.
Table of Contents
Your Responsibility For Maintenance ............. 0... ccc eee eee ee i Machine Information .............. 0... ee eee eee eee i
Foreword 2.0... 0c cece cece cence eee eee ii Non-Leland Replacement Parts Notice ................000006 ii FCC Warning «2.0... ccc cee nee eee ii
Table of Contents ....... 0... ee eee iii
"What’s Hot, What’s New"... 00.0... ccc cc cee eee teen eee 1
Game Concept ........0. 0.0 cece terete e eens 2 The Leland Corporation Warranty ......... 0.0.00 c cece eee ees 3
Maintenance and Upkeep Procedure ................ 000000000 eee 4
The Troubleshooting Section ........ 0... 0c cece eects 5 A Note About Power ........ 0... 0c cece eee eee eee 5) DC Power ............. 5 AC Power ............. 5 Our Service Department 5 Troubleshooting Flow Chart ................ 00. eee eee eee 6 General Shooting ............ 0.0000 7 Garbage... 6... cece eee eens 7 No Sound .. 0... eee eee eee nae 7 No control or function switches .................000005 7 Monitor Shooting ........... 00.00 c cee eee eee eee ee 7 No Picture 2.0... eee eee 7 Sync Problems .......... 0.0... cece cece eee eee eee eee 7 Buffers... 0... cece eee eee e ee 7 About Mechanical Coin Counters .............. 00000 e ee eee 8
iii
Table of Contents (Continued)
INustrated Parts Section 20.0.0... 0. eee eee eneees Control Panel Illustrated Parts List Main Wiring Diagram Main Board .... 0... e rece eees Multi-Function Board ............. 0000 ccc cece eee eaee Analog Springstick Assembly Cabinet Wiring Diagram Bookkeeping and Diagnostics Section ...........0.0. 000 cee ce eeuee 16 Bookkeeping .....0. 00... e eee e nee 17 Diagnostics Menu 17 Buttons and Controls Test ...... 2.0.0... c cece cece eee 18 Processor Memory Test ........ 0.00. cece cece cece ee eee ees 18 Video Alignment Screens... 2... 0... cece cece eee ence enee 19 The Cross Hatch Screen .......... 00. c cece ccc e cece e eee 19 Red and Green Screen 1.2.0... 0... cece cee cece eee eee 19 Blue and Miscellaneous Screen ...........0.000 000 ccc ee eae 19 Background Screens 1.0.00... 0. c cece cee nee 20 Audio Subsystems Test .......... 0... 0c cee eee eee eee ee eees 20 Game Set-Up ........ 0. eee 21 Statistics 26... nce cece eee eee 21 Game Statistics... 6... cece cece 22 Operation Statistics... 0... ccc cece eee 22
"WHAT’S HOT...
WHAT’S NEW"
: Fumbles, fake punts, pileups, and more
challenging tackling
7 Sideline shop
. Choice of college or pro teams
" Streamlined go-anywhere cabinet
" New scoreboard
: Improved graphics
Game Concept
“All-American Football" - the only thing that could top the number one hit Team Quarterback and the legendary Quarterback.
"All-American Football" has all the features of Team Quarterback and much more, all in a streamlined go-anywhere cabinet.
"All-American Football" plays even more like real football. Now with fumbles, fake punts, pileups, and more challenging tackling. An informative new scoreboard highlights new and improved graphics throughout. One to four players can now play as their favorite Pro or College Team.
The competition keeps getting tougher, and our computer team is no exception. Slip up on coverage and he’Il burn you - try to sack him and you’re in for a knock-down drag-out struggle.
We've added an innovative Sideline Shop to the Play Select where players can customize their team with a wide range of needed talents. For example, players can purchase a harder helmet for surer, more ball jarring tackles or SportKreem to get more range out of their arm. By trading credit clock time for added skills, players get more out of the game and you get more out of the cash box.
Leland’s exclusive Stat Storage gives players an equity that keeps them coming back. Online statistics of over 15 categories show them what they’re doing right and what they need to improve. Top Salaries, another Leland feature, sums up the statistics to a overall rating.
Add this to the passing, pitching, running, and kicking game strategy that players from coast to coast have mastered and your "All-American Football" has the guts for glory.
The Leland Corporation Warranty
The Leland Corporation warrants that whenever the video display (monitor) and/or the power supply and/or the printed circuit boards and/or all parts contained therein are furnished with its product, that such part or parts will be free from all defects in materials and workmanship for a period of sixty (60) days from the date of shipment. The Leland Corporation’s warranty of above parts is subject to the normal use and service on its product. No other products or part thereof are warranted. If the products described in this manual fail to conform to this warranty, The Leland Corporation’s sole liability shall be, as mutually agreed, to replace or repair such products which are returned to The Leland Corporation during the stated warranty period, provided:
A. The Leland Corporation is notified in writing upon discovery by the buyer that said products are defective.
B. The defective product or part is returned pre-paid to The Leland Corporation’s plant with a Leland Corporation Returned Merchandise Authorization (RMA) number clearly visible on the outside of the package.
C. The Leland Corporation’s examination of the returned product(s) or part(s) determines, to our satisfaction, that the alleged defects existed and were not caused by accident, misuse, neglect, alteration, improper repair, installation or testing.
The Leland Corporation is not responsible for bent pins on ICs not installed by our employees. In no event shall The Leland Corporation be liable for loss of profits, loss of use, or incidental or consequential damages.
Except for this warranty, The Leland Corporation disclaims all other warranties, expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose, and all other obligations or liabilities on The Leland Corporation’s behalf, and it neither assumes nor authorizes any other person to assume for The Leland Corporation any other liabilities in connection with the sale of products manufactured by The Leland Corporation.
Maintenance and Upkeep Procedure
The winning coach will always tell you offense wins games, but defense wins championships! To keep your "All-American Football" a fine-tuned machine, you must defend the game from dirty or improperly adjusted monitors, sticky coin mechs, or poorly adjusted player controls. With the proper defensive moves, you will enjoy the success of a championship season.
The following are recommended standard procedures when servicing your machines.
- Every collection -
a. Make sure the cabinet and especially the control panel are clean and free of gum, grease, and dirt.
b. Play the game. Check the joysticks and buttons for proper adjustment and operation. (See the buttons and controls test in the Diagnostics section.) Note: Be sure to adjust, clean, or replace any marginal switches.
c. Clean and adjust the monitor to insure the picture is "rich" and inviting.
- Once a month -
a. Check the inside of the cabinet for dirt and dust. Suggestion: Carry a portable "dustbuster" type vacuum.
b. See that all connectors are properly seated.
c. Be sure the power supply is up to snuff. (See "A Note About
Power" for proper settings.)
d. Go through all diagnostic functions to insure proper operation and inspect game settings.
At first, these steps may seem cumbersome, however, when viewed with respect to the income generated by aclean, well-maintained machine, as opposed to the income lost by a dirty, "trashed" game, the benefit of spending those extra few minutes will be seen as a wise investment.
The Troubleshooting Section
A Note About Power
DC Power
The computer board on this machine operates most efficiently when the power supply is providing a steady 5.00 to S.0SVDC. When checking DC power always put your leads across the +5VDC test points on the top board (e.g. not at the power supply, DC input connector or any IC.) and be sure that the +5 volt supply is between +5.00VDC and +5.05VDC. Also be sure that there is less than .005 volts AC riding on the +5 volt line. If you do find AC on the DC line, suspect the filter capacitor or the rectifier on the power supply. Low voltage or AC on the DC lines are the main causes of the following problems:
. "Garbage" on the screen . f ‘f Computer "Freeze'
ig Coin or Coin Meter malfunction
, A variety of seemingly unrelated problems
AC Power
Connect this game only to a grounded three-wire outlet which provides between 108 and 132 volts AC. If you have only a two-wire outlet we recommend that you hire a licensed electrician to install a grounded outlet. The possibility exists that players may receive an electrical shock if this system is not properly grounded.
Our Service Department
For parts, service and technical information first contact your authorized Leland Corporation distributor. For additional technical aid feel free to contact the Leland Corporation Customer Service Department at (619) 562- 7000 Monday through Friday from 8:00.AM to 5:00 PM Pacific Standard Time.
To provide you with the quickest possible response to your questions, please have the following information ready when you call:
- Your game name and serial number.
- Any reference materials and a list of observations.
Troubleshooting Flow Chart
Don’t Touch that Switch!!!
Before you reach for the power switch take a good look at the game. Open it and check for loose wires, bad connections, or burned spots. Look for spilled drinks and signs of vandalism. Those quick checks will save you a lot of time.
After you’ve eliminated the obvious, start digging.
C1 Power-up Picture
Good Picture No Power Check fuses and ( Power connections
Go to Bookkeeping and Diagnostics Section
Garbage
Check for closed. Switches on the coin door and control panel. Also check for loose IC’s and bent pins.
Power Supply —
See - A note \ about Power y Coin-up and start game. Listen for sounds. [No Sound Check speakers connections & adjust volume.
[ Turn up screen (brightness) on the monitor
Bright Screen -No Video- No
Brightness
Check wires and connectors from PCB (P41) to monitor - Don't overlook ground. Check monitor power, fuses, and connectors. Also check tube for damage.
Never take anything for granted. This is easy to do if you are in a hurry -- You’ll kick yourself every time for missing a broken wire or loose connector after spending hours looking in the wrong place - I have.
Troubleshooting
General Shooting
Garbage Check:
No Sound Check: Power supply voltages Closed switches on the control panel or coin door Loose connections, loose ICs, or bent pins on the board Pins 3 through 7 on connector P-4. If less than +5 VDC suspect U114 or U119.
Loose connections Low +12VDC supply Bad speaker or volume pot
No control or function switches (includes coin switches) Check:
Monitor Shooting
No Picture Check:
Sync Problems Check:
Buffers All connections (especially ground) Wire continuity between board and switch Closed or broken switches Input buffers (see buffers)
Power connection Monitor fuses Video connections (check continuity)
Sync and ground connections (see Wiring Diagram) Sync polarity Video output buffer
An input or output (I/O) buffer is the component that connects the actual game computer to the outside world and, as such, is the part most likely to fail. Check the following list when attempting to isolate possible problems. First and second choices are given. (M= Main Board, I/O= Multi-Function Board).
Troubleshooting
Problem Area Component PCB Location
| Video | 1st 7405 or 74805 | M-U24 |
(Colors or Sync)
| Player Controls | Ist 150 ohm resistor | See Wiring Diagram |
| and/or Coin Controls | pack. | for specific switch. |
2nd 74LS257
| Audio (Bad channel) | 1st 7524 | 1/O0-U35 (ch5) |
2nd 7533 through U40 (chO) 1/O-U31
TDA 2002 M122
About Mechanical Coin Counters
We have not installed mechanical coin counters on this game for two reasons:
- The bookkeeping program is extremely accurate and includes not only number of coins dropped and dollars earned, but also the number of tests and coins in a given period. (See Bookkeeping in the Diagnostics Section).
- These mechanical coin counters produce an inductive "kick" that will damage components on the circuit board. Checkerboard video
is the most common problem - take a look at the "NMI not" signal
on the master Z80 (pin 17). If a low input is observed, try replacing U114 (74LS08) and/or U119 (74LS157).
ILLUSTRATED PARTS SECTION
TOP MARQUEE CABINET RETAINER 32-12192-01 20-13562-01 FLOUR. LAMP FIXTURE MARQUEE GRAPHIF- 22-14928-01 26-12083-01
SPEAKER MARQUEE PLEXI 71-10834-01 21-13103-01 SPEAKER GRILL BOTTOM MARQUEE 20-13564-01 RETAINER 20-13563-01
ON/OFF SWITCH 37-10894-01
CONTROL PANEL ASSEMBLY GRAPHIC 38-15025-24 22-14929-01
(Ea)
19°VERTICLE MONITOR 38-11900-01
COIN DOOR 19-30025-01
COIN BUCKET 12 s002670% LEG LEVELER PLATE
20-13519-01 (5 ea)
POWER SUPPLY 38-16628-01
SVC SW BRKT 20-13136-01 SWITCHING
| POT 500ohm | FUSE HOLDER | POWER SUPPLY |
| 51-12501-01 | 34-12155-01 | 82-12150-01 |
FUSE 5A S.B.
| RED BUTTON (SHORT) | 67-12050-01 | ISOLATION |
37-11192-02 TRANSFORMER AC LINE FILTER 43-11704-01 BTN HOLDER W/ SWITCH 63-12131-01 37-11373-01 AC INPUT PLATE 20-12138-01 «POWER CORD 87-12143-01
PANEL ILLUSTRATED PARTS LIST
BUTTONS (SHORT) RED BI-11192-02 BLACK 37-11192-03 BLUE 37-11192-06 ANALOG (SPRING) JOYSTICK BUTTON HOLDER 37-13055-01 WITH SWITCH 37-11373-01 TYPE 2 (KRAFT)
PAL NUT 25-10559-01 NOT SHOWN
SPRINGSTICK ADAPTER PLATE 20-15102-00
SPRINGSTICK RUBBER GASKET 23-10401-01 JOYSTICK, MICRO
38-11401-01
To MONITOR
HORIZONTAL SYNC
VERTICLE SYNC GROUND
MAIN WIRING DIAGRAM
(MAIN BOARD)
COIN DOOR VOL. CONTROL
P21
*+5VDC +5vpc NOTE: SYSTEM PIN-OUT +5voc OPPOSITE OF PIN-QUT MOLDED IN HARNESS GROUND ¢ CONNECTORS. GROUND GROUND GROUND
NOT USED +12¥DC
N/U 00 eee (+5 VDC) BLACK =m GROUND (COIN HARNESS) GRAY =m LEFT QB START (TO P51) ORANGE === COIN MECH 2 YELLOW ==em= SERVICE (INSIDE COIN DOOR) BROWN mes LEFT HB START (TO P51) BLUE === COIN MECH 1
GROUND
LEFT QB JOIN
LEFT QB UP LEFT HB JOIN
LEFT QB DOWN
LEFT QB LEFT
LEFT QB RIGHT LEFT QB ACTION
GROUND
LEFT HB UP
LEFT HB DOWN
LEFT HB LEFT
LEFT HB RIGHT LEFT HB ACTION
MALE MOLEX CONNECTORS T¥PICAL PIN-OUT
SEE MAIN BOARD LAYOUT FOR BOARD CONNECTOR LOCATIONS.
MAIN WIRING DIAGRAM (MULTI-
FUNCTION BOARD)
J31 J32
RIGHT HB ACTION
RIGHT QB ACTION
RIGHT QB JOIN RIGHT HB JOIN
GROUND
RIGHT HB RIGHT
RIGHT HB LEFT
RIGHT HB DOWN
RIGHT HB UP
RIGHT QB RIGHT RIGHT QB LEFT
RIGHT QB DOWN RIGHT QB UP
GROUND
ANALOG GROUND
+12¥DC
LEFT ANALOG HORIZ.
LEFTY ANALOG VERT.
RIGHT ANALOG VERT.
RIGHT ANALOG HORIZ.
+12¥DC
ANALOG GROUND
NOT USED
BLACK
BLACK
BLACK
BLACK
TYPE 1 (CH) RED meee +5YDC
RED =e +5VDC
RED == +5VDC
™= GROUND ™ GROUND ™" GROUND == GROUND
ORANGE *+12¥DC SEE P?7 ON MAIN BOARD WIRING DIAGRAM
FROM SWITCHING POWER SUPPLY
TYPICAL ANALOG SPRINGSTICK ASSY. (BOTTOM VIEW)
TYPE 2 (KRAFT) “=
ON/OFF
SWITCH
LINE
FILTER
MONITOR
BROWN
GROUND BRAID
ISOLATION
TRANSFORMER
CONTROL PANEL SWITCHING POWER SUPPLY AC POWER 108 - 132 VAC 2.54 MAX INET WIRING DIAGRAH DC POWER +5VDC @ LIA +12VDC @ 2A -5VDC @ 1A CAB
Bookkeeping and Diagnostics Section
To enter the Bookkeeping and Diagnostics Section:
Press and hold the left Quarterback Join button Press the test button (located inside the front door) . Release both buttons
Upon entering the program the Main Menu will appear. Follow the instructions on this menu to select and enter the desired function.
Main Menu
Left Qback join - selects function Left Hback join - enters function
Bookkeeping Diagnostics Game Set-up Statistics
Restart game Cancel changes and restart game
(Note the Program Serial Number) ~
SN = XXXXXXXX
Bookkeeping
The Bookkeeping function is your
| game | accountant. | It | records | the |
lifetime earnings of your game and
| allows | you, | through | the | use | of |
| resettable | "Period" | totals, | to keep | ||
| track | of | weekly, | monthly, | or |
location earnings.
| location | standard | to | maintain | |
| accurate | accounting | data. | (ie. | 6 |
coins/tokens per dollar)
This function does not affect the number of coins per credit. (See in "Game Set-Up” section for this information).
Di és Left Qback join - selects function ‘Left Hback join - enters function
Buttons and Controls Test ot Memory Test: Video Alignment Screens Background Screens Audio Subsystems Test
Return to Main Menu Left Qback join ~ selects function Left Hback join - enters funiction Coins Dropped = Mech 1 Lifetime: 0 Period Coins: 0 Period Dollars: ‘Coins Dropped - Mech 2 Period Coins: 0 Period Dollars: $0. ‘Total Coins Dropped Lifetime, ‘Period Coins: Period Dollars: Service button pressed 0 Total Credits Given o
Reset Coin Mech Counters: Reset Mech 1 dollars collected Reset Mech 2 dollars collected
‘Set Coins/Tokens per Dollar: 4 coins per dollar coin Mech 1 4 coins per dollar coi Mech 2 Return to Main Menu
Diagnostics Menu
Invoking the Diagnostics function will open a very complete and easy to use set of tests designed to take the grumbling and hair pulling out of adjusting, troubleshooting, and servicing your machine.
You will notice that the diagnostics section has a sub-menu of its own.
Buttons and Controls Test Press the following Buttons: This test provides a quick se Quarterback 1 join examination of the state of all Halfback 1 join Quarterback 2 join buttons and controls as well as an Halfback 2 join easy range setting format for the Sole Meche analog inputs (springsticks). Service Switch ‘Quarterback 1 Action
Minimum and maximum settings Quarterback 2 Action to the left. To reset the pots, Quarterback Loysick an
are shown in italics on the screen Hallbath ¢ Aenbe
| break melt points or loosen screws | Haltback 1 Joystick | - | ||
| (depending on joystick type), align | Quanemana omic | Hae | ||
| each pot using this screen, and | ech | A | Right | |
| reseal the pot to the mounting | Up | Lett | ows” | Right |
| assembly with a hot soldering | on | ee | oro | BG) |
FFH
| i | i | . | Left Springstick Vertical: | ‘O1H (+402) |
| pencil or retighten screws. | on | ne |
Right Springstick Horizontal: 80H (+-02) O1H FFH Right Springstick Vertical: O1H (+-02) FFH ‘Press Halfback 1 Join button or service button twice to exit.
Processor Memory test Processor Memory Test
| Master ROM Tested | | i s he Ole wan be | The Erasable Programmable Read | |||
| Master ROM Ciood | | Ti iayed by ils boat | Only | Memory | (EPROM) | and |
H aon nub she Random Access Memory (RAM) | "Master ROM tested | ”,
| l opuersuper | | | IC’s are storage areas for the |
Masice RAM Tested actual game guidelines and are
Master RAM Good accessed by the Microprocessor section. The percentage of field failures in these areas is very low, but when problems do arise they can be a bear to track down. This test samples the action of the Slave Memory Tested processor section and notes any incongruities.
| Slave RAM Good | . | . |
Slave ROM Good Warning: Read your warranty
Left halfback join exits test before attempting any printed
circuit board repairs.
Video Alignment Screens
The picture on the screen is the most important and most neglected part of the game. It is a proven fact that a dirty, misaligned, or unfocused screen will cause a player to walk away even if the game is his/her favorite piece. A little elbow grease and a couple of minutes taken to go through these adjustment screens will make a difference in the cashbox. Use all three screens to adjust your picture and then go to the Background Screens section to make the game look "rich". Use the cross hatch screen to adjust focus, alignment, size, and contrast. Wavy horizontal lines denote bad contrast. The background should be black and the lines solid white.
Red and green test
Red and Green Screen
Adjust screen control so green color bar shows faintly on the 1 level and use red cutoff control to adjust red to the same intensity.
Blue and Miscellaneous Screen
Use blue cutoff control to make gray color bar look gray. Adjust red and green drive controls slightly, if necessary to make the white color bar white.
Background Screens
In this test the background screens are shown while the EPROMS which contain the information for these screens are displayed at the top of the screen. The test is not
| only | helpful | when | looking | for |
| those | "glitches" | one | sometimes |
encounters, but may also be
| viewed | as | a visual | test | of the |
colors and picture clarity after the Video Alignment test has been completed.
Audio Subsystems Test Press left halfback join to end
Audio PROMS OK Audio RAM OK
Communications Test passes
8 Bit DAC Test (Fading tones)
Complete (Channels 0 through 5)
10 Bit DAC Test (Ready!)
DAC Interaction Test (6 Tone pulses)
Complete. (Channels 0 through 5)
Music Test (Charge Tune)
Background Scrolling Test
Viewing Proms: UXX UXX
_ Press Left Hback Join to Exit
Audio Subsystems Test
The sounds are the second most
Game Set-Up
| This | section | is | vital | to | the |
condition of your cashbox. When
| used | in | conjunction | with | the |
| Bookkeeping | section | of | the | |
| diagnostics | package, | the | Game | |
| Set-up | function | will | keep | your |
game on your list of top earners for many seasons. The coins per credit settings range from 1 coin/1 credit to 20 coins/20 credits. You
| might even | set | the two | mechs |
differently, ie. 1 coin/ 1 credit and 4 coins/5 credits. Sometimes a little tinkering pays off. The Play Time per credit function sets the time in 30 second increments.
Statistics
Left Qback Join - Selects Function Left Hback Join - Enters Function Game Set-Up Left Qback Join - Selects Function Left Hback Join - Enters Function
Coin Mech 1 1 Coin for 1 Credit
Coin Mech 2 4 Coins for 6 Credits
PlayTime Per Credit ------------------------------++ 2:00 Attract ModeSound Return to Main Menu pet ene. H | SOME SOUND ADVISE: | Those annoying attract mode | sounds are supposed to draw { attention 1 LET THEM! L
Statistics Gaime Statistics Operation Statistics The statistics menu is the gateway to other game accounting Return to Main Menu information. It contains two choices, Game Statistics and Operation Statistics. Game Statistics contains information on multiplayer play and Operation Statistics contains information on game Operation and Play times.
Game Statistics
This section is your "Report Card". It lets you know how well you’ve
| done | in | setting | your | game | for |
| maximum | earning | power. | You |
will notice that no where in this
| booklet | is | the | word | difficulty |
mentioned. The reason for this is that the game is set up to sense
| the | ability | of | the | player | and |
respond accordingly. The way it
| works | is | - | the | player’s | salary |
| increases | as | his | percentages |
increase (i.e. passing percentage) and the computer knows it must play harder - simple huh?
Operation Statistics
Left Qback Join - Selects Function Left Hback Join - Enters Function
Lifetime Operation xx Days, xx Hours, xx Minutes
Lifetime Play xx Days, xx Hours, xx Minutes
Period Operation xx Days, xx Hours, xx Minutes
Period Play xx Days, xx Hours, xx Minutes Reset Period Timers on Exit - No/Yes Return to Statistics Menu Game Statistics
Left Qback - Selects Function Left Hback - Enters Function
| IPL | 2PL | 3LP.—sO4PL | ||
| Games | 0 | 0 | 0 | 0 |
Started Joined Cont’d Comp’d
| LeftOB™ | 0 | 0 | 0 |
| leftHB | 0 | 0 | 0 |
Right QB
Left HB
Erase Hall of Fame on Exit - No Clear Game Statistics
Return to Main Menu
Operation Statistics This section reports the real-time duration counters. They are used at the factory to time burn-in, but can also be of use in the field. Play duration is the time that any number of players were playing.
| Operation | duration | is | the | time |
| that | the | game | was | operating. |
Please reset the period counters when you reset period collections
| and | you | can | find | the | following |
statistics: earnings per hour ((days *24)+hourst+rounded minutes) /period collections. You can find out the efficiency of the game with the formula: lifetime operation/ lifetime play or period operation/
| period | play. | Period | timers | are |
reset by pushing Select then Enter. Lifetime timers will reset if battery ram circuit fails.
1841 Friendship Dr., El Cajon, CA 92020-9981 619-562-7000 Telex-497293 Cintron Fax-619-562-9468
Instructions for Conversion of most video games to The Leland Corporation All American Football
Parts for the All American Football conversion kit are as follows. Please inspect and check off:
| Quantity | Description | Part Number |
1 Decal, Control Panel Black 22-20006-01
| 1 | Plexi, Marquee | 21-13000-01 |
| 1 | Decal, Marquee | 22-14928-01 |
| 10 | Ty-Wrap w/eyelet | 25-10580-01 |
1 . Control Panel Assembly All American Football 38-17000-26 1 Circuit Board Assembly All American Football 38-11695-26 1 Manual, All American Football w/Kit Instructions 72-13606-26
| 1 | Harness, Video | 87-14118-01 |
| L | Harness, Main | 87-14117-01 |
2 Decals, Side All American Football 22-14929-01
| 1 | Harness, DC Power | 87~-14119-01 |
1 Decal, Monitor Wrap Around 21-13168-01
Remove existing game control panel, and all buttons or joystick controls associated with it. Install the black control panel decal over the existing metal control panel. We suggest you move the existing decal. Position the universal control panel above the control panel intended for conversion. Feed the harness through a convenient hole large enough for the harness connectors. Refer to Figure l.
Securely mount the universal control panel with a bolt screw not easily removed from the exterior of the cabinet. Avoid pinching the wires. Secure using the ty-wraps included with your kit.
When routing the harness, leave enough slack so that servicing of the control panel and circuit board assembly can be accomplished with relative ease. Place a wire ty-wrap as close to the circuit board connectors as possible to relieve strain on the connector pins.
Mount the circuit board in an area of the cabinet that receives ample ventilation. Make sure the circuit board can. be removed easily for service.
Refer to the DC power wiring diagram, making all the power connections as shown. Be sure to hook up the ground braid. Also, observe proper polarity. Careful with this one!
Set the regulated +5 volts at the test points on the circuit boards. Set the level per Page 5 of the All American Football] manual.
The conversion process is now complete. It is recommended at this point, to go into diagnostics to test the performance of the new kit.
HINTS FOR SUCCESSFUL GAME INSTALLATION
Take some advice from the game masters. Successful game installations can be simple if you take a minute and read the following hints. It is worth it's weight in aspirin!
Ll. Inspect your kit
Inspect all received parts for shipping damage and to familiarize yourself with the parts. Inspect all integrated circuits (hereafter called "Ic") for bent pins (being careful not to bend the pins).
The Old Case of the Bent IC Pin
The number one killer of a successful game installation, or for that matter, any other electronic device's proper operations, is bent pins. Avoid this plague and take the time (and patience) to make sure that all pins are in each hole and not bent.
Also installing ICs with bent pins runs the risk of bending the pins even further and eventually breaking them.
If pins are bent: First, grip the group of pins lengthwise with long needle-nose pliers. This gripping action will straighten them in this direction. Next, if any pins are bent in the other direction, straighten each one individually with needle-nose pliers being careful not to over-compensate. This overcompensation may break the pin.
Attach the Ground
Make sure to attach the ground braid to the control panel. Players risk an electric shock if the control panel is not properly grounded.
Which pole is which (observing polarity)?
Electronic circuits are quite sensitive to polarity and can easily lose their sense of humor when the polarity is reversed. A fuse may not be all they blow! Experienced electronic engineers check the polarity two times before applying power! You should probably check it three times. :
Refer to figure 2 for proper 115 VAC and DC power connections.
o Marquee blues (Marquee Installation)
Your game is a money-making investment! Why compromise by installing a crooked marquee? Avoid this an follow these instructions for installing:
First, place the plexiglass on the table. Next, center the decal on the plexiglass, getting an idea of the general location (before peeling off the back). Now, carefully peel off the back and place the far edge (lengthwise) on the plexiglass first, centering the remaining un-stuck (important) decal. Finally, “roll" down the rest of the decal, slowly, squeezing the air bubbles out with your hand.
Refer to figure 3 for Marquee Installation
Run Diagnostics (or Game Installation Success or Failure)
Five minutes of diagnostics may save an hour of frustration wondering why a feature does not work. Our software department is the best in the business. They have labored long and hard to write diagnostics to thoroughly check out your game. Take the time to follow the diagnostics section and prove to yourself that the entire game is working properly.
Next, play the game a couple of times to verify that all as well..
Monitor Outputs
The outputs from our system to the monitor are red, green and blue with negative horizontal and negative vertical syne.
How do I turn up the Sound?
Volume adjustment is easy. Locate VR1 (on main circuit board). Now look at the main board (largest board). Clockwise rotation increases the volume. Set this volume adjustment at full volume (fully clockwise). An additional volume adjustment is located on the service switch bracket just inside of the upper coin mechanism door.
wu) smn) cane)
wi) 0} > wal)
CONTROL PANEL MOUNTING AND CABLE ROUTING
FIG. 1
POWER CORD NEUTRAL
GND HOT
115 vac
E.M.I. FILTER
BLACK
INTERLOCK
SWITCH
CONTROL PANEL
LR FLUORESCENT LIGHT FUSE
AC/DC POWER CONNECTION FIG. 2 MONITOR GROUND BRAID N WHITE | GROUND BRAID
A +12V GND +5V -5V HOT °
° on qd ORANGE BROWN
° a
RED YELLOW
RED RHorontnn a
Donronwemanra YELLOW PIN 10 COIN DOOR LIGHTS ISOLATION TRANSFORMER gocacoocgS SINS A. B. Cc. D.CIRCUIT PANEL PLATE DHonronwenraea POWER SUPPLY +5V @ 7A -5V @ 1A +12V @ 1A I/O MEMORY EXPANSION BOARD MAIN LOGIC BOARD OUR PIN-OUT IS OPPOSITE OF THE PIN-OUT PRINTED ON THE CONNECTOR
I.E. PIN 1 IS PIN 10 FOR A 10 PIN CONNECTOR 4.
MARQUEE INSTALLATION
FIG.3