CATHODE RAY TOMES

Gauntlet II CO-284-07 1st Printing Two Player Conversion

Gauntlet II (Atari Games, 1986) · Change Order · 7 pages · original scan

Page 1

the factory. Relat eae ae eee 2 ees dering. you or defective chips or decals. ‘These instructions are for operators with a few Gauntlet For operators with many Gauntlet games, we recommend that you buy the following spare parts from your distributor and retrofit them in your shop first.

© Game PCB, Atari part number A043608-21 After retrofitting these two parts need to make only one mately 15 minutes to

as i ‘pro-

Atari Games Corporation ® P.O. Box 361110 ® Milpitas, CA 95035 ® (408) 434-3700

Page 2

mension to game play. The Dragon can be found guarding the exit to the maze and requires several direct hits to be overcome. By slaying the Dragon, the player will be rewarded with a permanent potion and a bag of treasure. In addition, at the start of the next maze there will be a hint on how to find the Secret Room. Along with all of the original potions, players will find several new potions to collect. Invulnerability, repulsiveness, reflective shots, super shots, and transportability are will tell the player which potions provide the greatest advantage; some potions might not be beneficial depending on the game play situation. A new feature that players especially like is being able to select their favorite hero. In Gauntlet II, a player can now choose his favorite original Gauntlet character such as Thor the Warrior, Thyra the Valkyrie, Merlin the Wizard, or Questor the Elf—even if that hero is already in play. The characters are color-coded so there can be two Warriors, for example, in play at the same time. If two Warriors were in play, one would be red, and the other blue.

Gauntlet II Player Quest Contest (U.S. and Canada Only) Atari Games is sponsoring a player contest that is built into every Gauntlet II game shipped within the U.S. and Canada. Called the Gauntlet II Player Quest, the contest minimal effort on the part of operators and locations. Atari will be awarding significant prizes in an effort to build further player interest in Gauntlet II and to give locations a competitive advantage for promoting the contest. A promotion packet is included in all Gauntlet II kits and games shipped within the U.S. and Canada. Refer to the cific terms of the contest.

NOTE If any U.S. or Canadian operator does not wish to participate in the contest, the Gauntlet II game option setting, Enable Secret Code, must be changed. Refer to Enable Secret Code Game Option in this manual for more information. (Gauntlet II games and kits shipped outside of the U.S. and Canada do not have the contest option enabled.)

Kit Parts Inventory The assembly and part numbers listed in Table 1 are included in the Gauntlet II Conversion Kit. Refer to Chapter Two-Player Gauntlet II

Table 1 Kit Parts Inventory A043790-01

Part No.QuantityDescription
A043797-011IC Kit
038158-011Product Identification Label
043759-011Display Sign
043791-011Graphics Panel Decal
CO-284-071Conversion Instructions for

Four-Player Gauntlet II

043756-011Contest Marquee (U.S. and

Canada only)

043798-01iContest Poster (U.S. and

Canada only)

CO-284-0825Contest Entry Form (U.S.

and Canada only)

CO-284-0910Player Tips Sheet
CO-284-101Contest Cover Letter (U.S.

and Canada only)

5, Illustrated Parts Lists, in the Supplementary Manual for a description of the component parts comprising the control panel assembly and the game PCB assembly.

Tools Required The only tools required to perform a complete Gauntlet Il conversion are: chip extractor tool, Phillips screwdriver, and isopropyl alcohol.

Conversion Instructions

A WARNING A To avoid electrical shock, unplug the game before performing the conversion procedures.

NOTE The following conversion should be performed by qualified service personnel.

The following procedures are arranged in the sequence recommended for performing the game conversion. The parts of your cabinet that are affected by the conversion are removed or cleaned first, and then the new Gauntlet I kit parts are installed.

Page 3

Two-Player Gauntlet IT

Install the Graphics Panel Decal The existing graphics panel decal located above the video display does not have to be removed before applying the Gauntlet II decal. Perform the following procedure to install the graphics panel decal.

CAUTION When applying the Gauntlet II decal, do so very carefully, Once stuck to any surface, the decal is very hard to remove.
  • Clean the existing graphics panel decal with a lint-free cloth moistened with isopropyl alcohol (or other appropriate cleaner).
  • Remove the protective backing from one end of the decal. Carefully position the Gauntlet I graphics panel decal so that the decal is aligned with the top center edge of the existing decal. Then press the center of the decal onto the panel.
  • Using the palm of your hand, rub the decal from the center toward the edge of the front panel. Repeat for the opposite edge of the decal!

IC Kit Anew set of 19 integrated circuits (ICs) has been designed for your Gauntlet II Game PCB. Table 2 lists the ICs and their Game PCB locations for the U.S., German, and Japanese kits,

Location of Replacement ICs The Game PCB Assembly showing the location of each EPROM to be replaced or added is included in this manual. (See Figure 1.) Each EPROM is marked with the letter AorR. A represents an EPROM to be added R represents an EPROM to be replaced

Install the ICs Perform the following procedure to install the new integrated circuits (ICs).

A WARNING A To avoid electrical shock, unplug the game before performing the conversion procedures if you have not already done so. Conversion Instructions

Basic Set of ICs: Designator Description Part No.

1A300 ns EPROM Integrated Circuit136043-1111
1c300 ns EPROM Integrated Circuit136043-1123
IL300 ns EPROM Integrated Circuit136043-1113
1P300 ns EPROM Integrated Circuit136043-1124
2A300 ns EPROM Integrated Circuit136043-1115
2c300 ns EPROM Integrated Circuit136043-1125
2L300 ns EPROM Integrated Circuit136043-1117
2P300 ns EPROM Integrated Circuit136043-1126

4R ‘Type-82S129 PROM Integrated Circuit 13604-1103

6p300 ns EPROM Integrated Circuit13604-1104
10A200 ns EPROM Integrated Circuit136043-1105
10B200 ns EPROM Integrated Circuit136043-1106
10CSLAPSTIC Custom Integrated Circuit—137412-106
16R300 ns EPROM Integrated Circuit136043-1120
16S300 ns EPROM Integrated Circuit136043-1119

ICs for U.S. Gauntlet II Game Only: Designator Description Part No.

6A200 ns EPROM Integrated Circuit1360441121
6B200 ns EPROM Integrated Circuit136044-1122
7A200 ns EPROM Integrated Circuit136044-1109
7B200 ns EPROM Integrated Circuit136044-1110

ICs for German Gauntlet II Game Only: Designator Description Part No.

6A200 ns EPROM Integrated Circuit136044-1221
6B200 ns EPROM Integrated Circuit13604-1222
7A200 ns EPROM Integrated Circuit136044-1209
7B200 ns EPROM Integrated Circuit13604-1210

ICs for Japanese Gauntlet {I Game Only: Designator Description Part No,

6A200 ns EPROM Integrated Circuit13604-1421
6B200 ns EPROM Integrated Circuit13604-1422
7A200 ns EPROM Integrated Circuit136044-1409
7B200 ns EPROM Integrated Circuit136044-1410
  • Remove the Gauntlet Game PCB from the cabinet. Refer to page 4-2 in the Supplementary Manual, Removing the Game PCB.
  • Refer to the Gauntlet Game PCB Assembly, and determine the location of the ICs to be replaced, added, and removed. (See Figure 1.)
  • Locate each IC to be replaced or removed, and remove it with a chip extractor tool.
  • For each replacement IC, align all of the pins on one side of the chip, and bend that row inward so that it is
Page 4

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 5

‘Two Player Gauntlet II

parallel to the other row. Carefully insert the chip into the proper socket on the game PCB, making sure the orientation notch faces the correct direction.

  • Then locate each new IC to be added, and insert it in its correct socket. 6, Reinstall the Game PCB in the cabinet, connect all the harness connectors, and reinstall the control panel.

Install the Product Identification Label Perform the following procedure to install the Gauntlet IT product identification label.

  • Remove the protective backing from the Gauntlet IT product identification label.
  • Place the Gauntlet II product identification label over the existing product identification label on the back of the cabinet.

Install the Display Sign Perform the following procedure to install the Gauntlet IT display sign, ‘ 1, Fold the bottom of the adhesive-backed cardboard display sign. Then fold the edge and bottom of the adhesive-backed display sign stand. Attach the stand to the center of the sign to become an easel.

  • Place the sign on the top of your game. Be sure the adhesive-backed sign bottom adheres to the surface of the cabinet.

Install the Contest Promotion Items (U.S. and Canada Only) Perform the following procedure to install the Gauntlet IT Player Quest Contest promotion items. 1, Install the contest marquee according to the directions, then place the marquee behind and to the right of the display sign on top of your game.

  • Place the contest poster in the front window of your location.
  • Place the contest entry forms in an accessible area in your location. (Players can also write to Atari Games Corporation for additional entry forms.)

Inspect the Game Before applying power, perform the following inspection procedure. 1, Carefully check that the Gauntlet II conversion kit parts have been properly installed. Conversion Instructions

2, Plug in the game power,

  • Perform the self-test procedure as given in Chapter 3 of the Gauntlet Operators Manual. Be sure to reset the Restore Factory Default Settings game option. Refer to the procedure in Reset the Game Options in this manual,
  • Be sure to reset the statistics and the histograms. Refer to the procedure in Reset the Statistics and Histograms in this manual.
  • Securely fasten the spring draw latches under the control panel. Close and lock the front doors.

Reset the Game Options After completing the Gauntlet II conversion, some game options should be reset. The game options are set in the Self-Test Mode. See Table 3 for the recommended settings. The recommended setting for the Health Per Coin option is 750 for Gauntlet IL. Perform the following procedure for resetting the options.

  • Press the Warrior Magic button until the Game Options screen is displayed. Note that the default (recommended) settings are highlighted in green.
  • Move the joystick up or down to select the Restore Factory Default Settings option. Move the joystick right or left to select the Yes setting. Press the Warrior Magic button. Refer to Chapter 3 in the Gauntlet Operators Manual for further information on setting the game options.
NOTE Exiting the Game Option screen by turning off the self-test switch will mor set the game for the selected options. Press the Warrior Magic button before turning off the self-test switch.
NOTE After changing the health per coin value, pressing the Warrior Magic button, and then turning off the self-test switch, a screen message (PRESS BOTH WARRIOR BUTTONS TO ABORT CLEAR- ING STATS) is displayed in the Attract Mode. Ig-

Enable Secret Code Game Option A new game option called the Enable Secret Code is designed into the Gauntlet Il game software. This option allows players to acquire a personalized secret code after

Page 6

Conversion Instructions

Table 3 Game Option Settings Option Name Available Settings Reset High Score Table No Yes <4 Sounds in Auract Mode No Yes <4

Restore Factory Default No <4 Settings Yes

Game Difficulty O—Easiest 2—Easy &) 4—Moderate <4

6—Hard 7—Hardest Health Per Coin 100, 125, 150, 175, 200, 225, 250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750 <4, 800, 850, 900, 950, 1000 +, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900, and 2000 Coins to Start 14,2,3,4 Enable Secret Code Now # Yes <4 Disable Speech No <4 Yes Reduce Text No Yes 7 “4 Manufacturer's recommended settings ALG OLntapIe Vato AIRGHLLSE <atiinse | orsabnhese GALA let II game only %* Manufacturer's recommended settings for German Gauntlet Il game only

finding their way to the secret maze and performing the required task. After successfully completing the task, players are asked to enter their full name (last name first) using up to 29 characters. The Enable Secret Code option is set by first displaying the Game Options screen in the Self-Test Mode. After selecting the Restore Factory Default Settings game option, then selecting the Yes setting and pressing the Warrior Magic button, the software automatically sets the Enable

Ifany U.S. or Canadian operator does not want to participate in the Gauntlet II Player Quest Contest, the Enable Secret Code option setting must be changed to no. Perform the following procedure to change this setting. Two-Player Gauntlet 11

1, Enter the Self-Test Mode by turning on the self-test switch.

  • Press the Warrior Magic button until the Game Options screen is displayed. Note that the default (recommended) settings are highlighted in green.
  • Move the joystick up or down to select the Enable Secret Code option. Move the joystick right or left to select the No setting. Press the Warrior Magic button to save this setting and to obtain the next screen. 4, Turn off the self-test switch.

Test/Repair the Joysticks and the Pushbuttons After installing the Gauntlet II conversion kit parts, the joystick and the pushbutton controls should be tested. Perform the following procedure to check the controls.

  • Enter the Self-Test Mode by turning on the self-test switch.
  • Display the Switch Test. Refer to page 3-3, Switch Test, in the Gauntlet Operators Manual for further information on both tests. 3, Test the joysticks by moving each joystick into all eight positions. Moving the joystick up/down or left/right

activated, then adjust or replace the switch. Also, once the joystick is moved into each position, wiggle the joystick. If the zero on the screen changes in any way, replace the switch. Refer to removing the Joystick Leaf Switches in the Gauntlet Operators Manual.

  • Testall the pushbuttons. Then wiggle the pushbutton. If the zero on the screen changes in any way, replace the switch. Refer to Removing the Pushbutton Leaf Switches in the Gauntlet Operators Manual.
NOTE The two-player Gauntlet II conversion kit does not contain joystick leaf switches, Atari part number 041508-01, or pushbutton leaf switches, Atari part numbers 160013-001 and 160013-002. However, if replacement leaf switches are needed, they can be obtained from your distributor or nearest Atari Field Service Office.

Reset the Statistics and the Histograms The statistics and the histogram information should be reset after completing the conversion to ensure accurate

Page 7

Two Player Gauntlet Il

game data. Perform the following procedure to reset this information: TF screen in the Self-Test Mode, then press the Warrior Fire button. . To reset the histograms, display the Histogram for Player 3 in the Self-Test Mode, then press the Warrior Fire button. Turn off the self-test switch, then close and lock the front doors. Refer to page 3-5, Statistics, and Histograms in the Gauntlet Operators Manual for further information. Conversion Instructions

Attract Mode The Attract Mode begins when the game is powered up or after exiting the Play or Self-Test Modes. The Attract Mode ends when coins or tokens are inserted. The Attract Mode continuously cycles through the following displays unless a player presses a button or moves a joystick:

  • Gauntlet title screen *® Game play demonstration © Legend depicting all the objects the players can collect, such as treasure, food, and magic potions
  • Monster screen: One screen displays all the monsters and how they differ © Audiovisual credits © High score table: One screen displays the high score per coin for each of the two characters