CATHODE RAY TOMES

Dig Dug TM-203 1st Printing

Dig Dug (rev 2) (Namco, 1982) · Technical Manual · 48 pages · 43 sections · original scan

Page 1

i = = §«=Operation, Maintenance and Service Manual ‘aes

|a i ee‘Complete with Illustrated Parts ListsSake:
ee ee eesaLr a Sey= =Ss
7 . a -en oe a a a ee= .
ee,Sige ie a eer (eo wee we ae hy“ace.
aa aeSe Aan ee g eae,5 ony
a . = 1> = i = aa B
z # os aapse Ca a es 8ose

Se Cg oa ee a oo eee ee & i 5 . : 5 7 . < a 5 eae ee See ae ae eo ee eer Seaaaeee Pie eT ay ee meee ee ee a * s - . . » = . . . = se zs 6 = ae ss a8 ss as 8 ze ae ae

a aSoe Se eeeg
oF F)SoeJoke
ene are nS ae wefRete eae
|ES 6 penee.figs alae
-a . oe . z . a = =e i x . =rcy = . = . =
.« at oon ao s. ee oe8 oa. 5 =e, 5
*i : c 5 5 a .. = s
,Bel Se ee aȎ
d= iz = 3 it= S 5 = -! a

5 = . sores

. = en: J . Ze . a 2 z e = 2 =

Page 2

GAME SERIAL NUMBER LOCATION

Your game's serial number is stamped on a label on the outside back of the P r )

Page 3

Operation, Maintenance and Service Manual

Complete with lliustrated Parts Lists

Engineered and Designed by NAMCO, LTD. Manufactured under license by ATARI, INC.

Page 4

Dig Dug™

© 1982 by Atari, Inc. All rights reserved. No part of this publication may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use, without permission from the publisher.

The Dig Dug™ game play, all graphic designs, this technical manual, its accompanying schematic diagrams, and the display manual! are protected by the new Copyright Act of 1976.

This Act provides for increased penalties for violating federal copyright laws. Courts can impound infringing articles while legal action is pending. If infringers are convicted, courts can order destruction of the infringing articles.

In addition, the Act provides for payment of statutory damages of up to $50,000 in certain cases. infringers may also have to pay costs and attorneys’ fees, fines up to $25,000, and face an imprisonment of up to one year.

Atari will aggressively enforce its copyrights against any infringers. We will use all legal means to immediately halt any manufacture, distribution or operation of a copy of video games made by us. Anyone who purchases such copies risks forfeiting such a game.

Published by: ATARI INC. 790 Sycamore Drive PO. Box 906 Milpitas, California 95035

Lithographed in the U.S.A. 3L

Page 5

Notice Regarding Non-ATARI Parts

WARNING

Use of non-ATARI parts or modifications of your ATARI game circuitry may adversely affect the safety of your game, and may cause injury to you and your players.

The warranty printed on the inside back cover of this manual may be voided, if you do any of the following:

  • you substitute non-ATARI parts in your coin-operated game, or
  • you modify or alter any circuits in your ATARI game by using kits or parts not supplied by ATARI.

Not only may the use of any non-ATARI parts void your warranty, but any such alteration may also adversely affect the safety of your game, and may cause injury to you and your players.

INTERFERENCE

to licensed communications services is not permitted by the

FCC (Federal Communications Commission)

If you suspect interference from an ATARI game at your location, check the following: @ All grounds (green wires) in the game are properly connected as shown in the game wiring diagram, and @ The game’s power cord is properly plugged into a grounded 3-wire outlet. If you are unable to solve the interference problem, please contact: Atari Customer Service (800) 526-3849 or (800) 538-1611 DigDug™

iit

Page 6

Dig Dug™

Table of Contents

1 Set-Up Procedures A. New Features..... B. Game Inspection Cc. Game Installation. . on

  • Installation Requirements
  • Voltage Selection D. Switch Locations . .
  • On/Off Switch ..
  • Utility Panel Switches .
  • Option Switches . Option Switch Settings Self-Test Procedure .. . GamePlay ..... . Attract Mode .... . Ready-to-Play Mode . PlayMode ....... . High Score Mode . . Hints for Game Play omm QPoONMa

2 Troubleshooting A. Introduction ....... 00... cece cece nee eee B. Comments on Troubleshooting . C. Self-Test Procedure ............ 0.6. c cece eee eee

3 Maintenance, Repair and Parts Cabinet-Mounted Assemblies . The Control Panel .......... Fluorescent Tube and Speaker . Video Display.............. Vertical-Mounted Coin Door Printed-Circuit Boards . .. Power Supply Assembly .. . OmmoOD> COHDDDHOOREEEODOOOS

Page 7

Dig Dug™

List of Illustrations

Figure 1-1 Figure 1-2 Figure 1-3 Figure 2-1

Figure 2-2 Self-Test Screen 1—Test Fails Figure 2-3 Self-Test Screen 2

Illustrated Maintenance, Repair and Parts: Figure 3-1 Cabinet-Mounted Assemblies............... sae .. 3-2 Figure 3-2 TheControl Panel ........ .. 3-4 Figure 3-3. Control Panel Assembly . .. 3-5 Figure 3-4 TheJoystick Control ....... 0.6. e cece eee eee cette eee 3-6

Figure 3-5 Fluorescent Tube and Speaker 3-8 Figure 3-6 Video Display.............. 3-10 Figure 3-7 Vertical-Mounted Coin Door . . 3-11 Figure 3-8 Printed-Circuit Board Removal 3-14

Figure 3-9 DigDug™ Game PCBAssembly.............00. 00sec eee e eee 3-15 Figure 3-10 Regulator/Audio || PCB Assembly : 3-19 Figure 3-11 PowerSupply Assembly ....... 3-21

Table 1-1 Game Price and Bonus Options ...............00 cece eeeeeeee Table 1-2 Game Difficulty, Price and Special Options Table 1-3. DigDugScoring.............. 0c ccc cence eens

Page 8

Dig Dug™

NOTE If reading through this manual does not lead to solving a certain maintenance problem, call TELEHELP® at the Atari Customer Service office in your geographical area, as shown below.

WEST and CENTRAL U.S.A. Service only

Atari, Inc. California Customer Service Office 1105 N. Fair Oaks Avenue P. O. Box 427, Sunnyvale, CA 94086 Telex 17-1103 (Monday-Friday, 7:30-4:00 pm Pacific Time) = From California, Alaska, or Hawaii (408) 745-2900 Pom Service from anywhere in the area shown in white toll-free (800) 538-1611

EAST U.S.A. Service only

Atari, Inc. New Jersey Customer Service Office 12A World's Fair Drive, Somerset, NJ 08873 Telex 37-9347 (Monday-Friday, 7:30-4:00 pm Eastern time) ame From New Jersey (201) 469-5993 From anywhere else in this area @ olrfree (800) 526-3849

EUROPE Service only

Atari Ireland Limited European Customer Service Office Tipperary Town, Ireland Telex 28165 TIPPERARY TOWN, (Monday-Friday, 9:00-6:00 pm GMT) IRELAND

BH 06252155

vi

Page 9

Set-Up Procedures

How to Use This Manual

This manual, written for game operators and service technicians, describes the Dig Dug™ game.

Chapter One includes new features, game set-up, option switch settings, self-test procedures and game play.

Chapter Two details troubleshooting procedures.

Chapter Three contains maintenance, repair and parts information. In addition, schematic diagrams of the game cir- Cuitry are included with this manual. Figures 1-1 and 3-1 illustrate the game cabinet. italicized lettering on these figures refers you to other places in the manual for information about specific cabinet parts.

A. New Features

The Dig Dug™ game has two new features. Even if you're familiar with ATARI® games, you should note these important differences: @ Joystick Control. This new four-position control is made of steel and molded plastic. lt has few parts, which makes servicing easier. The leaf switches snap in and out for easy replacement. The rubber bellows is designed for a quick return to center. @ Game Sounds. There are 21 different game sounds. In addition, a special option switch setting lets you hear sounds used during game play, but turns off attraction-mode sounds. New features, as well as all other major parts in the game, are illustrated in Figure 1-1. Throughout this manual, wherever one of these new features is mentioned, you will see this symbol:

Chapter

Page 10

Set-Up Procedures Dig Dug™

FLUORESCENT TUBE AND SPEAKER See Figure 3-5

COLOR VIDEO DISPLAY See Figure 3-6

a JOYSTICK See Figure 3-4

CONTROL PANEL See Figure 3-2 & 3-3

GAME PCB See Figures 3-8 & 3-9

COIN DOOR See Figure 3-7

CASTER

POWER SUPPLY UTILITY PANEL See Figure 3-11 See Figure 1-2

WARNING SHOCK HAZARD Connect this game only to a grounded 3-wire outlet. If you have only a 2-wire outlet, we recommend you hire a licensed electrician to install a grounded outlet. Players may receive an electric shock if this game is not properly grounded! REGULATOR/ AUDIO It PCB POWER ON/OFF SWITCH See Figures 3-8 & 3-10

Figure 1-1 Game Overview

1-2

Page 11

Dig Dug™ Set-Up Procedures

B. Game Inspection C. Game Installation it was delivered to you in good condition. 1. Installation Requirements

Please inspect your game carefully to insure that

Power 175 watts D NOTE . 1 Temperature 0 to 38°C (32 to 100°F)

0 not plug the game in yet! Humidity Not over 95% relative

Space Required 64 x 79 cm (25% x 31 in.) Game Height 174 cm (68% in.)

  • Examine the exterior of the game cabinet for dents, chips, or broken parts.

2. Remove the screws that were used as extra se- 2. Voltage Selection

curity to seal the rear access panel. Unlock and . . open this panel and the coin door; inspect the in- The power supply used in this game operates on terior of the game as follows: ‘< line voltage i ame psoas in ne aiek A e power supply may have three different voltage bd Check that all plugin ita fon the selection plugs: 100 VAC (violet wire color), 220 VAC game harness) are firmly seated. ep ug any (blue wire color), and 240 VAC (brown wire color). connectors found unplugged. Don’t force connectors together. The connectors are keyed so they only go on in the proper orientation. A reversed edge connector will damage a PCB and will void your warranty. Before plugging in your game, check your line voltage. Then check the wire color on the voltage selection piug that is plugged into your power supply. Make sure the voltage selection plug is correct for @ Check that all plug-in integrated circuits on your location’s line voltage (see Figure 3-11). the game PCBs are firmly seated in their sockets.

@ Remove the tie-wrap that holds the coiled gen

power cord on the inside cabinet wall. Check the cord for any cuts or dents in the insulation. Place the square black plastic strain-relief plate in the wood slot at the bottom of the rear panel opening.

WARNING To avoid electrical shock, do not touch | internal parts of the display with your

hands or with metal objects held in your ee 4

hands! —, \

@ Note the game’s serial number. It is printed on the special label on the back of the game cabinet. Verify that the same serial number is also on the Dig Dug game PCB, Regulator/Audio || PCB, power supply and video display. A drawing of the serial-numbered components is on the inside front cover of this manual. Please mention this number whenever you Call your distributor for service.

@ Check major subassemblies, such as the SS

power supply, control panel and video display, for secure mounting.

Page 12

Set-Up Procedures

D. Switch Locations

  • On/Off Switch The on/off switch is located on the back of the cabinet, lower left side (see Figure 1-2).
  • Utility Panel Switches The utility panel includes the volume control, selftest and coin switches, and coin counter. The coin Dig Dug™

switch is used to credit the game without tripping the coin counter. These switches are located inside the upper coin door (see Figure 1-2).

  • Option Switches Option switches are located on the game PCB as follows: @ Game price and bonus options are at PCB location 2C/D. @ Game difficulty, price and special options are at PCB location 2C.

UTILITY PANEL:

COIN COUNTER

SELF-TEST

VOLUME CONTROL (To increase, : tum clockwise) COIN

POWER ON/OFF SWITCH OPTION SWITCHES: SWITCH AT 2C/D (Game price and bonus options) SWITCH AT 2C (Game difficulty, price and special options)

Figure 1-2 Game Switch Locations

Page 13

Dig Dug™

E. Option Switch Settings

Tables 1-1 and 1-2 detail game options and their settings. Options are preset at the factory and shown by the $ symbols. However, you may change the settings to suit your individual needs.

Table 1-1

The 8-toggle switch at location 2C/D is accessible when the Dig Dug™ game PCB is mounted in place. To change switch settings, set the self-test switch to on. Verify the changes on the self-test Set-Up Procedures

Game Price and Bonus Option Settings

screen. Then turn the self-test switch to off. A “coin” is defined as 25¢, 1DM or 1Fr. If you have a 2DM/1DM or 2Fr/1Fr coin door with two coin counters, set switch 8 at PCB location 2C to off. Then different denominations are counted on the two coin counters.

Settings of 8-Toggle Switch on Dig Dug PCB (at 2C/D)

87654321Option
OnOn1 Dig Dug life/
OnOff2 Dig Dug lives
OffOn3 Dig Dug lives$
OffOff5 Dig Dug lives

Bonus lives awarded at the following point values: With 1, 2 or 3 Dig Dug lives With 5 Dig Dug jives

OnOnOnNo BonusNo Bonus
OffOnOnFirst at 10,000,First at 20,000,

second at 40,000, second at 60,000, and every 40,000 $ and every 60,000

OnOffOnFirst at 10,000,First at 30,000,

second at 50,000, second at 80,000, and every 50,000 and every 80,000

OffOffOnFirst at 20,000,First at 20,000,

second at 60,000, second at 50,000 and every 60,000

OnOnOffFirst at 20,000,First at 20,000,

second at 70,000, second at 60,000 and every 70,000

OffOnOffFirst at 10,000,First at 30,000,

second at 40,000 second at 70,000

OnOffOffFirst at 20,009,First at 20,000

second at 60,000

OffOffOffFirst at 10,000First at 30,000

On Off On Off

On Off On Off On On Off Off

On On Off Off On On On On

Off Off Off Off Right coin mech—coin doors with 1 or 2 coin counters* 1 coin for 7 credits 1 coin for 6 credits 1 coin for 3 credits 1 coin for 2 credits 1 coin for 1 credit $ 2 coins for 3 credits 2 coins for 1 credit 3 coins for 1 credit

$Manu/acturer's suggested settings *See Table 1-2 for left coin mechanism.

Page 14

Set-Up Procedures Dig Dug™

Table 1-2 Game Difficulty, Price and Special Options The table below contains the switch settings for options relating to game difficulty, price and special options. The switches, ‘on the PCB at location 2C, are accessible when the PCB is mounted in place. Aspecial option allows for continuation of game play. If a player is at a more advanced round when his game ends, he has 16 sec- Onds to begin the next game at the same round. Another special option aliows you to freeze the game action.

Settings of 8-Toggle Switch on Dig Dug PCB (at 2C) 8 7 6 5 4 3 2 1 Option

On Off

On On On Off

Off On

Off Off

On Off On Off

Off On

On On Off Off One coin counter $ Two coin counters * A—Easy game difficulty B—Medium game difficulty $ C—Hard game difficulty D—Expert game difficulty Continuation of game play $ No continuation of game play Attract Mode sound $ No Attract Mode sound

Normal game action $ Freeze game action

Left coin mech—coin doors with 2 coin counters On 1coin for 1 credit $ Off 1 coin for 2 credits On 2 coins for 1 credit Off 2 coins for 3 credits

$Manufacturer’s recommended settings *Coin doors with different denominations and two coin counters.

F. Self-Test Procedure

This game will test itself and provide data to show that the game’s circuitry and controls are operating properly. The data is provided on the video display and speaker. No additional equipment is necessary.

We suggest you perform the self-test procedure when you first set up the game, any time you collect money from the game, when you change game options, or when you suspect game failure.

Refer to Figure 1-2 for the location of the self-test switch and option switches. To perform the self-test, set the self-test switch to on. After about eight seconds the self-test screen will be displayed.

To see game statistics, press the utility coin switch. To reset the high score table, simultaneously push and hold the pump and utility coin switches for 10 seconds. To end the self-test, set the self-test switch to off.

The complete self-test procedure is explained in Chapter 2, Self-Test Procedure. \f any part of the test described in Figure 1-3 fails, refer to Chapter 2.

Page 15

Dig Dug™ Set-Up Procedures

Figure 1-3 Self-Test Procedure

Instruction Test Passes

1, Set the self-test switch to on (see Figure 1-2). Patterns appear on the screen. After about 8 seconds, the screen displays the picture below. The RAMs, ROMs and other chips are tested. If the picture is different from the picture below, refer to Chapter 2, Self-Test Procedure.

  • Activate any control panel switch. Game sounds are produced, from SOUND 00 through SOUND:
  • Activating any control panel switch produces a new sound. Test all switches this way. If test fails, refer to Chapter 2, Self- Test Procedure. (<p Game sounds: SOUND 00 Credit issued SOUND 01 Start of game SOUND 02 Indication of highest score SOUND 03 Game over SOUND 04 Monster attacking Dig Dug SOUND 05 Dig Dug dies SOUND 06 Monster escaping SOUND 07 Bonus Dig Dug awarded SOUND 08 End of wave

SOUND 09 Monster speeding up SOUND 10 Monster crushed by rock SOUND 11 Monster bursting SOUND 12 Rock hitting ground SOUND 13 Rock falling SOUND 14 Dragon spitting fire SOUND 15 Dig Dug throwing harpoon SOUND 16 Dig Dug pumping up monster

SOUND 17 Dig Dug walking SOUND 18 Monster moving SOUND 19 Dig Dug capturing vegetable SOUND 20 Enter initials into high score table

ALL RAMS GOOD

ALL ROMS GOOD

TYPE OF CABINET

LEFT COIN MECH >1 COIN 1 CREDIT —-1 COIN 1 CREDIT

=>DIGDUG 3

RANK B DIFFICULTY SOUND 04

SOUNDS 1ST BONUS FOR 10000 PTS 2ND BONUS FOR 40000 PTS «— BONUS LEVELS GAME STATISTICS: AND FOR EVERY 40000 PTS THE COUNT STARTS AT 999999) AND DECREASES. For example, if you play 10 games, the game subtracts 10 from = 99 .9999 .9999 .9999 .9999. 999 and the display shows 98.9 for the number of games played. (Disregard decimal points.)

NO.OF GAMES NO.OF POINTS NO.OF SECONDS —_NO. OF BONUS

PLAYED ‘SCORED PLAYED LIVES AWARDED

RIGHT COIN MECH

NO. OF LIVES

Page 16

‘Set-Up Procedures

G. Game Play

The Dig Dug™ game is a one- or two-player game with a color raster-scan video display. The screen shows a Cutaway view of the land, most of which is below ground. The player controls the Dig Dug character who travels through and digs tunnels in the dirt. The object is for Dig Dug to destroy monsters by pumping them up or dropping rocks on them and to capture vegetables.

The third picture simulates game piay. Dig Dug walks through underground tunnels. Monsters chase him and he periodically pumps them up or drops rocks on them. This picture ends when Dig Dug is destroyed.

  • Attract Mode The attract mode begins when power is applied to the game, after a play or high-score mode, or after self-test. This mode is continuous and stops only when a Credit is entered, or when in self-test. This mode may last for about one minute and fifteen seconds. In the attract mode, the screen displays one of four possible pictures.

In the first picture, Dig Dug enters the screen from the top right and walks across the surface. He digs a tunnel into the ground and begins to dig around the words DIG DUG. Meanwhile, monsters escort the word ATARI across the top of the screen. When Dig Dug digs entirely around the words DIG DUG, these words, ATARI and the monsters fall down to a new position on the screen. Everything in the picture rolls up except the words DiG DUG.

In the second picture, game characters appear on the screen. Dig Dug is between FYGAR, the firebreathing dragon, and POOKA, the fat monster. First, Dig Dug pumps up POOKA until he explodes and disappears, and 200-500 (points) appears in his place. Then, Dig Dug pumps up FYGAR until he explodes and disappears, and 200-1000 appears in his place.

The third picture simulates game play. Dig Dug walks through underground tunnels. Monsters chase him and he periodically pumps them up or drops rocks on them. This picture ends when Dig Dug is destroyed.

The fourth picture shows the high-score table. The top five scores, round played and matching initials appear on the screen.

During the attract mode, the high score and score(s) for one or both players appear at the top of the screen. Credits or number of Dig Dug lives and Dig Dug™

the round number appear at the bottom of the screen. This mode ends when coins are inserted and accepted for game play.

  • Ready-to-Play Mode

During this mode, the high score and score(s) for one or both players appear at the top of the screen. The words PUSH START BUTTON, 1 PLAYER ONLY or 1 OR 2 PLAYERS and bonus life information appear in the center of the screen. ATARI copyright, credits and the round number appear near the bottom of the screen. This mode ends when a player pushes the start button.

  • Play Mode

This mode begins when Dig Dug enters the screen from the top right and walks across the surface. He digs down to the center of the screen. The words PLAYER 1 READY or PLAYER 2 READY appear on the screen. Also, high score and score(s) for one or both players appears at the top of the screen. The number of Dig Dug lives and the round number appear at the bottom of the screen.

Game play takes place on a cutaway section of the land. The characters are Dig Dug and two monsters, one of which is a fire-breathing dragon. The underground area is divided into four different colored layers of dirt. Rocks are scattered in the dirt. The sky is at the top of the screen.

The player controls Dig Dug. He moves through horizontal and vertical tunnels. When Dig Dug digs new tunnels he moves slowly. When he is on the surface or in an existing tunnel, he moves faster. The object of the game is for Dig Dug to destroy all the monsters and go to the next round.

Page 17

Dig Dug™

Monsters are trapped in caves. A monster may get out of a cave two ways. Dig Dug may dig him out. Then, the monster chases Dig Dug. The monster may also get out of the cave by turning into a ghost. As a ghost, he cannot be destroyed. The ghost does not travel in the tunnels. He travels through the dirt, and can travel diagonally. However, he reappears as the monster when he goes into a tunnel.

The monster moves faster than Dig Dug in vertical tunnels and slower on the surface. He destroys Dig Dug by catching him. In addition, the dragon destroys Dig Dug by breathing fire on him. The dragon only breathes fire horizontaily. The fire can penetrate the dirt.

Dig Dug destroys the monsters by pumping them up until they burst, or by causing rocks to drop on them. To pump up and destroy a monster, the player presses and holds down the pump button. It is pos-sible to stun a monster for a few seconds by pressing the pump button once or twice. While a monster is stunned, Dig Dug may pass over him without being destroyed. If two monsters are very close together, only one may be stunned. The other will catch and destroy Dig Dug.

Dig Dug must dig tunnels under the rocks to get them to drop. A rock may fall in a vertical or a horizontal tunnel. A rock also goes through a thin layer of dirt from one tunnel to the next. In a vertical tunnel, Dig Dug may stay directly under a rock and it will not drop. However, in a horizontal tunnel, Dig Dug must move out from under a rock right away, or he will be crushed.

After two rocks are dropped, a vegetable (worth extra points) appears in a tunnel in the center of the

@ Ga! Set-Up Procedures

screen. A player has 10 seconds to capture (touch) the vegetable or it will disappear. There is only one vegetable per round.

The game progresses by rounds. Round 1 starts with four monsters and three rocks. The vegetable is a carrot. One flower on the surface (top right of the screen) represents Round 1. Two flowers represent Round 2, etc. As the rounds progress, the monsters move a little faster, and are better at avoiding falling rocks. In each round, the last monster tries to escape. If he is not caught by Dig Dug, he exits on the surface (top left).

The game ends when all of the Dig Dug lives are used up. A piayer may continue to play at the same round (level) by following instructions on the screen. He has 16 seconds to insert a coin(s). Then he must push and hold the pump and start buttons at the same time.

  • High Score Mode

This mode begins when a player has one of the five top scores. A player enters his initials in the center of the screen. The initials are then transferred to the table. To reset the high-score table, set the self-test switch to on. Simultaneously push and hold the pump and utility coin switches for 10 seconds. Then set the self-test switch to off.

  • Hints for Game Play @ Get many monsters to follow you. Then dig a long vertical tunnel up to a rock. Drop the rock by digging right or left. Dig Dug may take extra time to turn. It is better to start turning early than to wait until the last second. @ Destroy monsters at bottom dirt level for more points. @ Use PUMP to stun monsters. Then you may escape or walk through them. @ Don’t stop next to dragon when he is in a cave. His fire can go through a thin layer of dirt and destroy you. @ A vegetable appears after two rocks have been dropped. So be sure to drop two rocks in each round.

1-9

Page 18

Set-Up Procedures Dig Dug™

Table 1-3 Dig Dug™ Scoring

Bursting Monsters * Dirt Layer POOKA FYGAR|

1200400
2300600
3400800
45001000
  • Worth / amount vertically

Dropping Rocks Monsters

Destroyed Points

1 1000 2 2500 3 4000 4 6000 5 8000 6 10,000 7 42,000 8 15,000

Vegetables Points

Round Vegetable for Capture

1Carrot400
2Rutabaga600
3Mushroom800
4Cucumber1000
5Cucumber1000
6Eggplant2000
7Eggplant2000
8Bell Pepper3000
9Bell Pepper3000
10Tomato4000
abTomato4000
12Onion5000
13,Onion5000
14Watermelon6000
15Watermelon6000
16Galaxian7000
7Galaxian7000
18Pineapple8000
19Pineapple8000

20 and above Pineapple 8000 Digging a new tunnel is worth 10 points per %, inch (1.61 cm).

Page 19

Troubleshooting

Dig Dug™

A. Introduction

This game tests itself when the self-test switch is set to the on position. If there is a failure, the game Produces audiovisual aids to help you isolate the failing portion of the game. The self-test procedure included in Chapter 1 is to help you decide if the game is or isn’t working properly. The expanded procedures in this chapter are included to help the qualified electronic technician determine why the game isn’t working properly.

If you are not a qualified technician, do not try to work on the game circuitry or video display. True, it is not earning money when it doesn’t work. However, your investment in this game may greatly increase if either the video display and/or game PCB are destroyed while you are working inside the game cabinet. Be assured, it isn’t worth it.

Page 20

B. Comments on Troubleshooting

When troubleshooting, first determine the symptom(s) of the failure. After determining the symptom, look over the wiring diagram and determine what assemblies could cause the failure. Could it be caused by the power supply, Regulator/Audio II PCB, or the video display?

The next step is to check all harness wires and connectors to the suspected failing assembly. If you find no harness or connector problem, substitute an assembly known to be good for the suspected failing assembly. If the game functions properly, you have successfully isolated the failure. If it doesn’t, repeat the procedure with another assembly.

When you have isolated the failing assembly, you must troubleshoot that assembly and make the necessary repairs. If the display is failing, we suggest that a qualified video display technician handle the troubleshooting and repair. If the power supply or Regulator/Audio Il PCB is failing, troubleshooting and repair is relatively simple, as these assemblies are not too complicated. If the game PCB is failing, troubleshooting and repair will greatly depend on your understanding of the operation of this PCB.

To effectively troubleshoot problems of the game PCB, it is necessary for you, the technician, to become familiar with the PCB's hardware. The diagrams in the schematic package (included with the game) show the functions of the circuitry. Again, while troubleshooting this PCB, first determine the symptom of the failure, then locate the suspected area on the schematic diagram. Dig Dug™

C. Self-Test Procedure

To enter Self-Test, set the self-test switch to the on position. Patterns appear on the screen. After about 8 seconds, the self-test screen is displayed (see Figure 2-1). See Chapter 1, Section F, Self-Test Procedure for acomplete description of this part of the self-test.

NOTE This procedure does not test the coin door lockout coils. If the self-test passes, but the lockout coils do not energize when the self-test switch is set to off, suspect the lockout coil wiring, coin door harness, game PCB harness, or driver Q5 and related circuitry of the game PCB.

RAM OK ROM OK UPRIGHT 1 COIN 1 CREDIT 1 COIN 1 CREDIT DIGDUG 3 RANK B SOUND 04 1ST BONUS FOR 10000 PTS 2ND BONUS FOR 40000 PTS AND FOR EVERY 40000 PTS

Figure 2-1 Self-Test Screen 1 Test Passes

Page 21

Dig Dug™ Troubleshooting

To go to screen 2, set the self-test switch to off and immediately to on again.

SCREEN 2:

i Ss ie A white crosshatch pattern appears on the screen Figure 2-2" Self Test Screen 1 (see Figure 2-3). Use this pattern for convergence Test Fails (see the raster-scan video display manual).

SCREEN 1:

RAM FAILURE is indicated by the word RAM and a pair of alphanumeric characters displayed at the top of the screen. The following table lists the bad RAM chip and its location. Bad RAM chip location Screen Display on game PCB RAM OL 9M RAM OH 9M RAM 1L 9M RAM 1H 9M RAM 2L 9E RAM 2H QuiK RAM 3L HIS RAM 3H 9H RAM 4L. 9FIG RAM 4H 9G/H

ROM FAILURE is indicated by the word ROM and a number displayed at the top of the screen. The following table lists the bad ROM chip and its location.

Bad ROM chip location Screen Display on game PCB ROM 1 6L ROM 2 6M. ROM 3 6NIP ROM 4 6R ROM 5 6c ROM 6 6D ROM 7 5L Figure 2-3 Self-Test Screen 2

Page 22

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 23

Maintenance, Repair and Parts

Dig Dug™

In addition to maintenance and repair information, this chapter provides the necessary information for you to order parts for your Dig Dug game. Please note that common hardware has been deleted from most of the parts lists. This includes screws, nuts, washers, bolts, etc.

The parts lists are arranged in alphanumeric order. For example, all ‘‘A-” prefix numbers come first. Following this are numbers in sequence evaluated up to the hyphen, namely O0- thru 99-, then 000598-thru approximately 190000-.

When ordering parts, please give the part number, part name, applicable figure number of this manual, and serial number of your game. This will help to avoid confusion and mistakes in your order. We hope the results will be less downtime and more profit from your game.

Atari Customer Service numbers are listed in the front of this manual for your convenience.

Chapter

Page 24

Maintenance, Repair and Parts Dig Dug™

A. Cabinet-Mounted Assemblies

Schematics, Self-Test Label & Manuals— see parts list on following page Fluor. Tube & Speaker Assy.— see Figure 3-5

037332-01 ——* Grille) (Shield) 178034-024 (FMoiding)

Video Display— . see Figure 3-6 71.2110 (Lock)

(Grille)

Control Panel Assy.— see Figures 32, 3-3 & 3-4

‘A002465-01 (Coin Counter)

178013-001 (Self-Test Sw.) (Latch) CX 2 44 in Sw.

Game PCB Assy.— see Figures 38 & 39

a 19-9032 Coin Door Assy.— (Vol. Ctrl.) see Figure 3-7 Anaezer‘o1

(Power Harn. Assy.) 038003-01 : 178048-001 (Util. Pri) ames

00999201 A037491-01 (OnlOft Sw. Cvr.)- (Coin Box)

A038256-01 H (Cabinet Assy.) Power Supply Assy.— A037470-01 see Figure 3-11 (On/Off Sw.)

RegJAudio I} PCB Assy.— see Figures 3-8 & 3-10 78-3201 A037453-03, (Leg) A037454.03 & ‘A037455-03 (Power Cord)

Figure 3-1 Cabinet-Mounted Assemblies

3-2 A038275-01 A

Page 25

Dig Dug™ Maintenance, Repair and Parts

Figure 3-1 Cabinet-Mounted Assemblies, continued Parts List

Part No. Description A002465-01 6V Coin Counter A037453-03 Strain-Relief Power Cord = (U.S.) A037454-03 Strain-Relief Power Cord (Austria, Belgium, Chile, Denmark, Finland, France, Germany, Greece, Indonesia, Italy, Netherlands, Norway, Spain, Sweden, and Uruguay) A037455-03 Strain-Relief Power Cord (Australia and New Zealand) A037470-01 Power On/Off Switch and Mounting Plate Assembly A037491-01 Coin Box A038004-01 Utility-Switch Panel Harness Assembly

A038256-01Cabinet Assembly(includes /egs and PCB retainers, but not the rear access panel)

A038295-01 Main Harness Assembly A038297-01 Power Harness Assembly The foltowing four items are the technical information supplements to this game: SP-203 Dig Dug™ Schematic Package ST-203-01 Dig Dug Label with SelfTest Procedure and Option Switch Settings TM-160 Service Manual for 19-Inch Electrohome Color Raster-Scan Display (Substitute TM-201 when using part no. 92-055, Wells-Gardner 19-inch Display) TM-203 Dig Dug Operation, Maintenance and Service Manual 19-9032 Volume Control 62-041 SPDT Momentary-Contact Pushbutton Utility Coin Switch with Black Cap 69-001 DPDT Self-Test Switch 71-2110 Panel Cartridge Lock Mechanism (for rear access panel) 78-3201 Cabinet-Leveling Leg 009992-01 OnlOff Switch Cover 034536-02 Foam Vibration Damper (For Regulator/Audio |i PCB) 034536-03 Foam Vibration Damper (For Dig Dug Game PCB) 036495-01 Speaker Grille 036686-01 Card of Game Pricing Labels (not shown in illustration)

037419-02Rear Access Panel(does not include lock)
037332-01Ventilation Grille(located on cabinet top)

038003-01 Utility Switch Pane! for Volume Control, Self-Test Switch, Coin Switch and Coin Counter 038274-01 Video Display Shield with Graphics 178013-001 Spring Draw Latch 178034-024 %-Inch Black Plastic T-Molding 178048-001 2.\nch Rigid Caster

A038275-01 A 3-3

Page 26

Maintenance, Repair and Parts

B. The Control Panel

WARNING

Prior to removing or repairing any switch on the control panel, unplug the game.

To Open the Control Panel: 1, Open the coin door. Reach up through the opening and release the spring-draw latches. They are on the cabinet side walls at each end of the control panel.

  • Lift up on the control panel at the top edge, and tilt it toward you. The control panel edge next to the display shield has foam tape applied to it. The tape cushions the shield and prevents liquids from entering the cabinet interior. Make sure this tape is in good condition.

Leaf Switch Repair: @ Adjust the leaf switches for a narrow gap. When a switch button is depressed, the resulting wiping action of the cross-bar contacts provides a self-cleaning feature. Don’t burnish the contacts. To clean them, use electrical contact cleaner. @ To replace a leaf switch, remove the screw with a Phillips-head screwdriver. @ To replace the switch button, turn the stamped nut with a wrench in a counterclockwise direction, as seen from the inside of the control panel. The ring on the outside of the control panel should not spin, due to its design. Dig Dug™

@ Reinstall the switch. Reconnect the harness wires as shown in the Schematic Package, Game Wiring Diagram. Make certain the right colors go to the right tabs on the switch.

LED Start-Switch Replacement: The LED switches have a very low failure rate. If a switch should ever be suspect, first test it using the directions that follow.

To Test LED Switch:

@ Remove the wires from the suspected switch. @ Attach the leads of an ohmmeter to normally open and common contacts. @ Check contacts (push and release the switch button) for closed and open continuity. @ |f the contacts do not operate sharply or always remain closed or open, then replace the LED switch.

To Replace LED Switch: @ Remove all wires from the faulty switch. @ Turn the switch counterclockwise while holding the black cone-shaped bushing on the outside of the control panel. ®@ Install a new switch using the reverse procedure. @ Reconnect the harness wires as shown.

LED CONTACTS. START 1

WHITE NORMALLY OPEN

BROWN(-): (N.O.) CONTACT

seo) Ht BLACK Lh Conon CONTACT

START 2

__ [Tt YELLOW = NORMALLY OPEN

ORANGE(-) = (N.O.) CONTACT

  • 1 = BLACK COMMON CONTACT

Figure 3-2

3-4 The Control Panel

Page 27

Dig Dug™ Maintenance, Repair and Parts

! WARNING ! Players may receive an electric shock if this ‘A038269-01 control panel is not properly grounded! After (Cont. Pri Decal) servicing any parts on the panel, check that the 038268-04 doystick Assy.— ground wire is firmly attached to the metal tab (Decal) see Figure oar on the inside of the control panel. Only then 038267-01 should you tock up the game. (Cont: Pal 78-6900402 2 62-039 (Start Sw.)

036895-07 (Bezel)

178030-003 75-9910NO (Pushbtn. Assy.) (Nut)

A038299-01 160013-001 (Harness) (Leat Sw./Btn. Hidr.)

Figure 3-3 Control Panel Assembly, continued Parts List

Part No. Description

A038269-01 Control Panel with Decal A038270-01 Control Panel Assembly A038299-01 Control! Panel Harness Assembly 62-039 SFDT Momentary Pushbutton Start Switch with Red Light-Emitting Diode 75-9910NO #5,-11 Steel Stamped Nut 78-6900402 Vinyl Foam Singie-Coated Adhesive Tape, %-Inch wide x )-Inch thick (24 in. required} 036895-01 Black Molded Switch Bezel 038267-01 Contro! Panel 038268-04 Control Panel Decal 160013-001 Leaf Switch and Button Holder (/eaf switch only is part no. 160012-001) 171016-001 Joystick Assembly 178030-003 Black Pushbutton Assembly

A038270-01 A 35

Page 28

Maintenance, Repair and Parts Dig Dug™

Prior to removing or repairing the joystick, unplug the game. 99-080028 (Shaft)

To Repair the Joystick: 99-080026 (Washer)

  • First, remove the entire joystick assembly from the contro! panel (see Figure 3-3). Now locate the four screws in the plastic joystick frame and remove these screws.
  • Next, remove the clip ring from the bottom of the shaft. The assembly will come apart.
  • To replace the bellows, pry it up and out of the plastic frame. @ Reassemble in reverse order. @ Note that the inner raised ring on the bellows is longer on one side. This side goes on the top of the assembly (toward the control knob).
  • To replace a /eaf switch, you don’t need to disassemble the joystick. @ Using your thumbs, pry apart the plastic flanges on the switch holder. With your index finger, lift the switch up so that it will clear the plastic tab located 99-080035, (Top Plate)

99-080029 on the outside end of the switch holder. (Washer) @ Slide the switch out of its holder. Replace the switch in reverse order. Adjust the switch for a narrow gap.

99-080031 i (Bellows)

99-080025 99-080032 (Switch) Disassemble in the order indicated. (Circled numbers match (Steel Washer) the numbered instructions.)

99-080030 (Spring) SS i 99-080034 i (Sw.Plate)

99-080033 (Guard Actuator)

99-080027 (Sw. Actuator) 82-AL616 (Screw) { " —--)-—_® "hm

Figure 3-4 Joystick Assembly

Page 29

Dig Dug™ Maintenance, Repair and Parts

JOYSTICK— TOP REAR VIEW

LEFT: BLUE, BLACK

DOWN: VIOLET, BLACK

WHITE/BLACK, BLACK

RIGHT: GREY, BLACK

Figure 3-4 Joystick Assembly, continued

Parts List

Part No, Description

73-3003 Retaining Ring 82-AL616 #6 x 1-Inch Cross-Recessed Pan-Head Type BT Tapping Steel Screw 99-080025 Leaf Switch 99-080026 24inch Black Plastic Washer 99-080027 Nylon Switch Actuator 99-080028 Metal Shaft 99-080029 Nylon Washer 99-080030 Spring 99-080031 Bellows 99-080032 Flat Steel Washer 99-080033 Plastic Guard Actuator 99-080034 Switch Mounting Plate 99-080035, Top Plate

171016-001

Page 30

Maintenance, Repair and Parts Dig Dug™

C. Fluorescent Tube and Speaker

WARNING Prior to removing or repairing the speaker, fluorescent tube or fan, unplug the game. If you drop a fluorescent tube and it breaks, it will implode! Shattered glass can fly 6 feet or more from the implosion. Use care when replacing any fluorescent tube.

To Replace Fluorescent Tube:

  • At the top front of the game, remove the three screws that secure the upper attraction-panel retainer to the cabinet. Loosen the three screws that secure the lower retainer to the cabinet. Lift the attraction panel up and out of its lower retainer.
  • Remove the cardboard locking tab at each end of the tube.
  • Slightly rotate the tube up or down, and carefully remove it from the lampholders. Replace with a new tube. Do not snap the tube in vigorously—you may break jt, causing an implosion! Replace the locking tabs.
  • Check that the green ground wire is securely attached to the large metal bracket and the baliast transformer on the wood panel. If the tube is not grounded, it may not start.

To Replace Speaker:

  • Remove the two Phillips screws that secure the light board to the cabinet. Slide the board out and unplug the 5-pin harness connector. Remove the board from the cabinet.
  • Unplug the two plug-in connectors on the speaker. Remove the hardware that attaches the speaker to the board. Replace the speaker, reattach the plug-in connectors, reinstall the wood board and reconnect the harness.

Disassemble in the order indicated. (Circled numbers match the numbered instructions.)

Figure 3-5 Fluorescent Tube and Speaker

3-8

Page 31

Maintenance, Repair and Parts Dig Dug™

NOTE To ensure that the fluorescent tube starts, make sure the green ground wire is firmly attached to both the ballast transformer and the steel lamp bracket. 037469-01 (Bracket) 148001-001 (Speaker)

179035-001 (Lampholder)

A037457-01 79-561816P (Harness) (Wire Nut)

70-304 (Tube) 142028-xxx (Transformer) 99-11003 (Starter) (A037540-01 (Gra. Wire) 99-11009 (Socket) 9911006 (Tab)

Figure 3-5 Fluorescent Tube and Speaker, continued

Parts List

Part No. Description

A037417-01 & -02 Fluorescent Tube and Speaker Assembly A037457-01 Light and Speaker Harness A037540-01 Ground Wire with Ring Lug 70-304 18-Inch 15W Cool White Fluorescent Tube 79-561816P. Spring-Connector Wire Nut for 16- to 18-Gauge Wires 99-11003 Fluorescent Lamp Starter 99-11006 Fluorescent Lamp Locking Tab (tab consists of two pieces) 99-11009 Starter Socket 037469-01 Steel Lamp Bracket 142028-001 60 Hz 118V Ballast Transformer (used on A037417-01 assembly) 142028-002 50 Hz 118V Ballast Transformer (used on A037417-02 assembly) 148601-001 6x 9-Inch 4-Ohm 15W Oval High-Fidelity Speaker 179035-001 2-Pin Fluorescent Lampholder

A037417-01 G 3-9

Page 32

Maintenance, Repair and Parts

D. Video Display

To Remove Video Display: 1.

Oarawo Open the rear access panel. Unplug the three display harness connectors, and disconnect the ground wire. . Remove the wood screw and flat washer used to secure the rear of the dispiay chassis to a wood cleat. . Open control panel (see Figure 3-2, The Control Panel). . Remove the video display shield. . Carefully remove the cardboard bezel.

  • Remove the four sets of hardware that secure the display chassis to the wood frame. . Carefuily pull the display out through the front of the cabinet. Service the display and reinstall in reverse order. Dig Dug™

A— WARNING —A; Shock Hazard The following procedure should only be performed by a qualified service technician. Prior to removing or repairing the video display, unplug the game. As an extra precaution, we highly recommend you discharge the high voltage from the picture tube. High voltages may exist in any video display, even with power disconnected. Use extreme

caution and do not touch electrical parts of the display yoke area with your hands or with metal objects in your hands! Implosion Hazard If you drop the display and the picture tube breaks, it will impiode! Shattered glass and the yoke can fly 6 feet or more from the implosion. Use care when replacing any display.

Disassemble in the order indicated. (Circled numbers match the numbered instructions.) 037443-03 (Bezel)

038274-01 (Shield)

Figure 3-6 Video Display, continued Parts List

Part No. Description

92-049 19-Inch Electrohome Color Raster-Scan Video Display (Acceptable substitute is part no. 92-055—use with TM-201) 038274-01 Display Shield with Graphics. 037443-03 Display Bezel

3-10 VA038275

Page 33

Dig Dug™ Maintenance, Repair and Parts

E. Vertical-Mounted Coin Door

170000-001 (Lamp) 179047-001 NSN {Lamp Base) @ L

Dp a 99-15040 99-15026 (Lever) (Coin Inlet)

(Coin Inlet)

PART OF a 99-15041 oo a 99-15054 99-15041 (Lockout Coil) { 99-15053 > (Lockt. Coil Spring) < (Pivot for Lever) 99-15055 d\ as (Retng. Screw) \ 7

99-15027 (Coin Ret. Box)

75.9148 . a (Hex Nut) Se Nt +—— 99-15028 (Coin Ret. Box)

75.056 (Lock Wash.) 99-15037 (Sw. Adjuster) 99-15056

99-15029 (Bracket):

(Switch)

75-3414S (Screw)

7214148 (Screw)

Figure 3-7 Vertical-Mounted Coin Door

A037619-xx B 341

Page 34

Maintenance, Repair and Parts

99-15070 (Door and Frame).

99-15063 (Screw)

99-15067 (Lock Assy.)

A037491-01 (Coin Box)

A037542-01 (Harness—not shown)

A037619-01 — U.S. 25¢/25¢ Coin Door ‘A037619-02 — U.S. 50¢/50¢ Coin Door ‘A037619-03 — Canadian 25¢/25¢ Coin Door A037619-04 — British 10 P/10 P Coin Door A037619-05 — British 10 P/50 P Coin Door ‘A037619-06 — British 20 P/50 P Coin Door ‘A037619-07 — Australian 20¢e/20¢ Coin Door

Figure 3-7

3-12 99-15067 (Lock Assy)

A037619-08 — German 1 DM/1 DM Coin Door ‘A037619-09 — German 2 DM/1 DM Coin Door ‘A037619-10 — German 2 DM/5 DM Coin Door ‘A037619-11 — German 1 DM/5 DM Coin Door A037619-12 — 5 Fri5 Fr Coin Door A037619-13 — Swiss 1 Fri1 Fr Coin Door A037619-14 — French 1 Fri1 Fr Coin Door Dig Dug™

99-15038 (Bezel for Button)

99-15001 thru 99-15012 (Ret. Button)

99-15065 (Clamp)

99-15039 (Bezel for Cover)

99-15036 (Cover)

99-15066 (Screw)

A037619-15 — French 2 Fr/1 Fr Coin Door ‘A037619-16 — Swedish 1 Kr/1 Kr Coin Door ‘A037619-17 — Spanish 25 Ptsi25 Pts Coin Door ‘A037619-18 — Italian 100 L100 L Coin Door A037619-19 — Hong Kong $1/S1 Coin Door ‘A037619-20 — Japanese 100Y/100Y Coin Door

Vertical-Mounted Coin Door, continued

A037619-xx B

Page 35

Dig Dug™ Maintenance, Repair and Parts

Figure 3-7 Vertical-Mounted Coin Door, continued Parts List

Part No. Description A037491-01 Coin Box (Not included in assembly) A037542-01 Harness Assembly 7 1006-035 Metal Coin Mechanism 72-1405S #4-40 x 4,,-Inch Cross-Recessed Pan-Head Steel Machine Screw 7214148 #4-40 x %-Inch Cross-Recessed Pan-Head Steel Machine Screw 75-056 #6 Internal-Tooth Zinc-Plated Steel Lock Washer 75-9148 #4-40 Steel Machine Hex Nut 75-3414S #4-40 x 1/-Inch 82° Cross-Recessed Flat-Head Steel Machine Screw 99-15001 Coin Return Button with U.S. 25¢ Price Plate 99-15002 Coin Return Button with U.S. $1 Price Plate 99-15003 Coin Return Button with German 1 DM Price Plate 99-15004 Coin Return Button with German 2 DM Price Plate 99-15005, Coin Return Button with German 5 DM Price Plate 99-15006 Coin Return Button with Belgian 5 Fr Price Plate 99-15007 Coin Return Button with French 1 Fr Price Plate 99-15008. Coin Return Button with Japanese 100 Yen Price Plate 99-15009 Coin Return Button with British 10 Pence Price Plate 99-15010 Coin Return Button with Australian 20¢ Price Plate 99-15011 Coin Return Button with Italian 100 Lire Price Plate 99-15012 Coin Return Button with U.S. 50¢ (2 x 25%) Price Plate 99-15025 Left Half of Coin Iniet 99-15026 Right Half of Coin Inlet 99-15027 Side Plate of Coin Return Box 99-15028 Base Plate of Coin Return Box 99-15029 Switch Bracket 99-15030 Flap for Lockout Coil (U.S. 25¢) 99-15036 Metal Coin Return Cover 99-15037 Switch Adjuster 99-15038 Bezel for Coin Return Button 99-15039 Metal Bezel for Coin Return Cover 99-15040 Coin Return Lever 99-15041 Lockout Coil 99-15042 Coin Switch for U.S. 25¢ 99-15052 Spring for Coin Return Button 99-15053 Spring for Lockout Coil 99-15054 Pivot for Coin Return Lever 99-15055 Retaining Screw 99-15056 Screw for Both Bezels 99-15060 Switch Cover 99-15063 Screw for Hinge 99-15065, Clamp for Frame 99-15066 Screw for Clamp 99-15067 Lock Assembly 99-15070 Door and Frame 170000-001 6.3V Miniature Wedge Base incandescent Lamp 179047-001 Lamp Base

A037619-xx, 3-13

Page 36

Maintenance, Repair and Parts

F. Printed-Circuit Boards

WARNING

Prior to removing or repairing any printed-circuit board, unplug the game.

To Remove Printed-Circuit Boards:

  • Open the rear access panel.
  • Locate the hardware that secures the PCB to the cabinet, and remove this hardware. (Each PCB has one screw and two spacers to secure it.)
  • If you are removing the game board, first remove the tie wraps that fasten the edge connector to that board. Then unplug the edge connector. If you are removing the Regulator/Audio || PCB, disconnect the three small harness connectors on this board. Dig Dug™

. Carefully slide the game PCB straight out of its retainers. Slide and lift the Regulator/Audio II PCB out of its slot. Be careful not to twist the boards, as this may loosen connections or components. Repair as required. Reinstall the PCB, making sure that the connectors are properly plugged in. Note that they are keyed to fit only one way, so if they don’t slip on easily, don't force them. A reversed connector will probably damage your game and void the warranty. Replace the hardware that secures the PCB to the cabinet wall. Close and lock the rear access panel. Check that the operation of the game is correct by performing the self-test. This is very important when you repair a PCB. Unless you are a qualified technician, do not turn the small knob on the Regulator/Audio II PCB.

Disassemble in the order indicated. (Circled numbers match the numbered instructions.)

REGULATOR! AUDIO II PCB

GAME PCB @®

Figure 3-8 Printed-Circuit Board Removal

3-14

Page 37

Figure 3-9 Dig Dug” Game PCB Assembly co z = a = dienes iw on © i Ee — - Besos | (SSe" ] wma t 7 ell)

sz) Dig Dug™

mou waom «

3-15 be its ee — grits

rh Maintenance, Repair and Parts

Page 38

Maintenance, Repair and Parts Dig Dug™

Figure 3-9 Dig Dug™ Game PCB Assembly, continued Parts List

Part No. Description (Reference Designations and Locations in Bold)

A038156-01 Dig Dug Game PCB Assembly

24-250106.10 uF 25V Aluminum Electrolytic Fixed Axial-Lead Capacitor(C9, 12)
24-250107100 pF 25V Aluminum Electrolytic Fixed Axial-Lead Capacitor(C1)
24-50047647 uF 50V Aluminum Electrolytic Fixed Axial-Lead Capacitor(C4-7)

29-088 .1 wF 25V Ceramic-Disc Radial-Lead Capacitor (C2, 3, 8, 31-68)

31-1N4002Type-1N4002 100V Switching Diode(CR2-4)
31-1N914Type-1N914 75V Switching Diode(CR6, 7)
34-2N3904Type-2N3904 NPN 60V 1W Transistor(Q1, 2)

34-2N6044 Type-2N6044 Darlington NPN Transistor (Q3-5) 37-4066 Type-4066 Quad Analog Switch Integrated Circuit (2L)

37-7406Type-7406 Integrated Circuit(SC)
37-74LS00Type-74LS00 Integrated Circuit(4R)
37-74LS08Type-74LS08 Integrated Circuit(7H)
37-74LS20Type-74LS20 Integrated Circuit(1H, 3P)
37-74LS32Type-74LS32 Integrated Circuit(SE, 6F, 5G/H)
37-74LS74Type-74LS74 Integrated Circuit(6H/J, 3R)
37-74LS86Type-74LS86 Integrated Circuit(4A, 4B, 5B, 9C)
37-74LS139Type-74LS139 Integrated Circuit(8/9A, 5D, 5F, 6H)
37-74LS157Type-74LS157 Integrated Circuit(9A, 10A, 4K, 4M)
37-74LS161Type-74LS161 Integrated Circuit(3F, 4F, 3H, 4N)
37-74LS166Type-74LS166 Integrated Circuit(8N)
37-74LS174Type-74LS174 Integrated Circuit(5A, 10H/J, 2M/N, 1N/P)
37-74LS175Type-74LS175 Integrated Circuit(9E)
37-74LS241Type-74LS241 Integrated Circuit(10J/K)
37-74LS244Type-74LS244 Integrated Circuit(4E)
37-74LS245Type-74L$245 Integrated Circuit(8F, 8G, 8H, 8M)
37-74LS257Type-74LS257 Integrated Circuit(1H/J)
37-74LS259Type-74LS259 Integrated Circuit(1G/H, SM/N)
37-74LS273Type-74LS273 Integrated Circuit(9B, 1L, 10M/N, 9R)
37-74LS367Type-74LS367 Integrated Circuit(7D, 7F, 6G, 7G, 4H, 7J/K, 7K/L, 7M, 7P)
37-74LS374Type-74LS374 Integrated Circuit(10E/F)
37-74LS377Type-74LS377 Integrated Circuit(4D)
37-74LS393,Type-74LS393 Integrated Circuit(4C)
37-74S04Type-74S04 Integrated Circuit(3A)
37-LM324Type-LM324 Integrated Circuit(3D/E)
38-MV5053Type-MV5053 Light-Emitting Diode(CR1)
62-001SPST Momentary Pushbutton Switch(SW1)

66-118P1T 8-Station SingleThrow, Dual-Inline-Package Switch (2C, 2C/D)

79-42C2222-Contact Medium-Insertion-Force Integrated Circuit Socket(10G)
79-42C2424-Contact Medium-Insertion-Force Integrated Circuit Socket(7A/B, 8A/B, 6C-8C, 10C/D, 6D, 5L,

6L, 6M, 9M, ON, 6N/P, 6R, 8R)

79-42C2828-Contact Medium-Insertion-Force Integrated Circuit Socket(10B, 8D, 2E, 8J, 1K, 9K, 8K/L, 5R,

7R)

79-42C4040-Contact Medium-Insertion-Force Integrated Circuit Socket(6A/B, SH/J, 6J/K)
79-42C4242-Contact Medium-Insertion-Force Integrated Circuit Socket(1/2C, 1/2E)

81-4302 Nylon Snap-In Fastener

3-16 [Continued on next page]

A03815601 A

Page 39

Dig Dug™ Maintenance, Repair and Parts

Figure 3-9 Dig Dug™ Game PCB Assembly, continued Parts List

Part No. Description 90-7005 Random-Access Memory (3K, 3N) 90-7036 Random-Access Memory (9E/F, 9F/G, 9G/H, 9H, 9HIJ, 9J/K) 100015-103 .01 pF, 25V, +10% Ceramic Disk Radial-Lead Capacitor (C14-30) Acceptable substitute is part no. 122005-103

110000-101100 Ohm, + 5%, %W Resistor(R80, 176)
110000-1021K Ohm, +5%, %4W Resistor(R1, 4-7, 10, 11, 14-17, 19, 24-46, 49-58, 67-70, 75, 78, 79, 81-96,

98, 111-126, 143-151, 154-167, 171-175, 177-180)

110000-10310K Ohm, +5%, %4W Resistor(R12, 13, 47, 48, 59-66, 104, 105, 107, 108)
110000-104100K Ohm, +5%, %4W Resistor(R101, 106, 109, 110)

110000-151 150 Ohm, +5%, %W Resistor (R2)

110000-221220 Ohm, +5%, %4W Resistor(R71, 73, 76, 152, 153, 168-170)

110000-222 2.2K Ohm, +5%, %4W Resistor (R99, 127-142) 110000-223, 22K Ohm, +5%, ‘%4W Resistor (R103)

110000-331330 Ohm, +5%, YW Resistor(R8, 9)
110000-471470 Ohm, +5%, “4W Resistor(R72, 74, 77, 97)
110000-4724.7K Ohm, +5%, %W Resistor(R20-23, 100)
110000-47347K Ohm, +5%, %4W Resistor(R102)
110001 -1521.5K Ohm, +5%, %W Resistor(R3)

111004-224 .22 uF 25V Ceramic Disc Radial-Lead Capacitor (C13) 122004-224 .22 yF 26V Ceramic-Disc Radial-Lead Capacitor (C13) 128002-101 100 pF 100V Epoxy-Dipped Radial-Lead Mica Capacitor (C10, 69) 128002-330 33 pF 100V Epoxy-Dipped Radial-Lead Mica Capacitor (C11, 70) 131003-001 Type-1N5257B 6.2V 1W Zener Diode (CRS)

136007-101Programmable Read-Only Memory, DD1 1(6L)
136007-102Programmabie Read-Only Memory, DD1 2.(6M)
136007-103Programmable Read-Only Memory, DD1 3(6N/P)

136007-104 Programmable Read-Only Memory, DD1 4 (6R)

136007-105Programmable Read-Only Memory, DD1 5(6C)
136007-106Programmable Read-Only Memory, DD16(6D)
136607-107Programmable Read-Only Memory, DD1 7(5L)
136007-108Programmable Read-Only Memory, DD2 9(8R)
136007-109Programmable Read-Only Memory, DD1-1(2K/L)
136007-110Programmable Read-Oniy Memory, DD1-2(2P)
136007-111Programmable Read-Only Memory, DD1-4(4G)
136007-112Programmable Read-Only Memory, DD1-3(10K/L)
136007-113Programmable Read-Only Memory, DD1-5(1A)
136007-114Programmable Read-Only Memory, DD1 10(9N)
136007-115,Programmable Read-Only Memory, DD1 11(10C/D)
136007-116Programmable Read-On'y Memory, DD1 15(8C)
136007-117Programmable Read-Only Memory, 0D2 14(7C)
136007-118Programmable Read-Only Memory, DD1 13(8A/B)
136007-119Programmable Read-Only Memory, DD1 12(7A/B)

137161-001 Read-Only Memory (10G)

137168-001Type-74LS368 Integrated Circuit(SN/P)
137169-001Type-74LS107 Integrated Circuit(1J/K, 2R)
137177-001Type-74LS138 Integrated Circuit(3B/C, 2G/H, 10N/P)

[Continued on next page]

3417

Page 40

Maintenance, Repair and Parts Dig Dug™

Figure 3-9 Dig Dug™ Game PCB Assembly, continued Parts List

Part No. Description (Reference Designations and Locations in Bold)

137186-001Multi-CPU Bus Controller Custom Chip 08(8D, 8J, 8K/L)
137187-001Coin and I/O Controller Custom Chip 51(1/2E)

137188-001 Steering Controller Custom Chip 53 (1/2C)

137189-001Video Ram Addresser Custom Chip 00(7R)
137190-001Universal Shift Register Custom Chip 02(10B)
137191-001Motion Object Controller Custom Chip 04(9K)
137192-001Controller Custom Chip 06(2E)
137193-001Sync Generator Custom Chip 07(1K, 5R)
137194-0014.0 MHz Z80A Central Processing Unit(6A/B, SHIJ, 6J/K)
137199-001Random-Access Memory(3G, 4J)
137200-001Type-74LS365 Integrated Circuit(2J, 3)
137201-001Type-74LS298 Integrated Circuit(2H/J, 10L/M, 10R)
137202001Type-74128 Integrated Circuit(3A/B)
137203-001Type-74LS158 Integrated Circuit(3M)
137204001Type-74LS283 Integrated Circuit(3C/D, 1M, 4P)
137211-001Static Random-Access Memory(9M)

144000-002 18.432 MHz Crystal (¥1) 179051-001 Test Point Acceptable substitute is part no. 020670-01

3-18

Page 41

Dig Dug™ Maintenance, Repair and Parts

NOTICE TO ALL PERSONS RECEIVING THIS DRAWING CONFIDENTIAL: Reproduction forbidden without the specific written permission of Atari, Inc., Sunnyvale, CA. This drawing is only conditionally issued, and neither receipt nor possession thereof confers or transfers any right in, oF liense fo use, the subject matter of the drawing or any design of technical information shown thereon, nor any right to reproduce this drawing or any part thereof. Except for manufacture by vendors of Atari, Inc., and for manufacture under the corporation's written license, no right to reproduce this drawing is granted or the Subject matter thereof unless by written agreement with or written permission from the corporation.

Oo R24, 10, 7\Wt— oO

Tip 32ToAzOO2ATDAZOOZA
alae Nacoz OSeyQ?

coo co 7 + Qs Rofeet cram BS csc can 33 coma |,o| cisco 33] Ree BERS [OS cla RIB f'_[220 121, yew ET og +b as L470 _*} Raia ee aR zi cl 470 th RI

C10

—-3B300.F+} —

35Y,

Figure 3-10 Regulator/Audio II PCB Assembly

A035435-01 F 349

Page 42

Maintenance, Repair and Parts Dig Dug™

Figure 3-10 Regulator/Audio Il PCB Assembly, continued Parts List

Part No. Description (Reference Designations and Locations in Bold) A035435-01 Regulator/Audio Il PCB Assembly 19-100P1015 .1 Ohm, +3%, 7W Wirewound Resistor (R24) 19-315102 1K Ohm Vertical PCB-Mounting Cermet Trimpot (R8) Acceptable substitute is part no. 119002-102. 24-250108 1000 yF 25V Aluminum Electrolytic Fixed Axial-Lead Capacitor (C13) 24-250477 470 uF 25V Aluminum Electrolytic Fixed Axial-Lead Capacitor (C1, 4, 12) 24-350338 3300 yF 35V Aluminum Electrolytic Fixed Axial-Lead Capacitor (C9, 10) 29-008 -1 F 25V Ceramic-Disc Radial-Lead Capacitor (C3, 11) 31-1N4002 Type-1N4002 100V 1-Amp. Silicon Rectifier Diode (CR1, 4) 33-TIP32 Type-TIP32 PNP Power Transistor (Q2) 34-2N3055 Type-2N3055 NPN Silicon Transistor (Q3) 37-LM305, 5V Linear Voltage Regulator (Q1) 721608C #6-32 x ¥2-Inch Cross-Recessed Pan-Head Corrosion-Resistant Steel Machine Screw 72-6606S #6 x %-Inch Pan-Head Thread-Forming Cross-Recessed Type-AB Zinc-Plated-Steel Screw 75-99516 #6-32 Nut/Washer Assembly 75-F60405 #6-32 x Va-Inch Binder-Head Nylon Screw

78-16008Thermally Conductive Compound(Q3)

78-16014 Thermally Conductive Silicon Insulator (Q2) 79-58306 6-Position Connector Receptacle (J6) 79-58308 9-Position Connector Receptacle (J7)

79-583544-Position Connector Receptacle(J8)

034531-01 Heat Sink 100015-103 .01 uF 25V Ceramic-Disc Radial-Lead Capacitor (C5, C14) 110000-010 1 Ohm, +5%, YW Resistor (R10, 19) 110000-100 10 Ohm, +5%, YW Resistor (R11, 20, 29, 30)

110000-101100 Ohm, +5%, %4W Resistor(R4, 12, 22)

110000-102 1K Ohm, +5%, YW Resistor (R27, 28)

110000-10310K Ohm, +5%, %4W Resistor(R13, 14)
110000-271270 Ohm, +5%, %W Resistor(Ri)
110000-33033 Ohm, +5%, %W Resistor(R3)

110000-392 3.9K Ohm, +5%, %W Resistor (R6) 110000-562 5.6K Ohm, +5%, %4W Resistor (R32, 33) 110000-752 7.5K Ohm, +5%, %W Resistor (R7)

110001-221220 Ohm, +5%, V2W Resistor(R9, 21)

110009-027 2.7 Ohm, +5%, 1W Resistor (R5) 122002-102 .001 uF 25V Ceramic-Disc Minimum Radial-Lead Capacitor (C2, 7, 16) 122004-224 .22 uF 25V Ceramic-Disc Capacitor (C6, 8, 15, 17) 137151-002 Type-TDA2002A 8W Linear Audio Amplifier (Q5, 7) 179051-001 Test Point Acceptable substitute is part no. 020670-01.

3-20

Page 43

DigDug™ Maintenance, Repair and Parts

G. Power Supply Assembly

WARNING

Fuse cover must be in place during game operation. A035888-01 (Transtormer)

A021084-xx (Volt. Sel. Piug) 29-053 (Capacitor) 03454401 (Fuse Block Cvr,)

79-4411001 (Fuse Post) 78-70501SC (Cap. Bracket) ' ~~ 46-2017002 (Fuse)

A035891-01 034482-02 (Fuse Harness) (Chassis)

46-301203 (Fuse)

037639-01 (Label)

78-2708 (Bushing)

A034630-01 79-3206 (Filter Assy.) (Fuse Block) 637641-01 46-2014002 (taped (Fuses)

A035890-01 15021001 erm Bloc ear Harness)

A034629-01 3A-MDA3501 (AC. Harn.) (Rectifier)

Figure 3-11 Power Supply Assembly

3-21

Page 44

Maintenance, Repair and Parts Dig Dug™

Figure 3-11 Power Supply Assembly, continued Parts List

Part No. Description (Reference Designations in Bold)

A021084-01Voltage Plug for 100V(violet)
A021084-02Voltage Plug for 120V_(yellow)
A021084-04Voltage Plug for 220V(blue)
A021084-05Voltage Plug for 240V(brown)

A034629-01 A.C. Harness Assembly A034630-01 RFI Filter Assembly (FL1) A035888-01 Transformer Assembly (11) Acceptable substitute is part no, A035888-02 A035890-01 Power Harness Assembly A035891-01 Fuse Harness Assembly A037671-xx Power Supply Assembly 29-053 27,000 uF 15 VDC Electrolytic Capacitor (C1) 3A-MDA3501 Bridge Rectifier, Type MDA 3501 (CR1) 46-2014002 4-Amp. 250 V 3AG Slow-Blow Glass Cartridge-Type Fuse (F2, F4-F6) 46-2017002 7-Amp. 250 V 3AG Slow-Blow Glass Cartridge-Type Fuse (F1) 46-301203 20-Amp. 32 V 3AG Slow-Blow Glass Cartridge-Type Fuse (F3) 78-2708 Nylon Type 6/6 Hole Bushing with %-Inch Inside Diameter x *°%,-Inch Outside Diameter x Ya-Inch Thick 78-70501SC 2-Inch Diameter Capacitor Mounting Bracket 79-15021001 2-Circuit Single-Row Terminal Block 79-3206 5-Position 3AG Fuse Block with ¥4-Inch Quick-Disconnect Terminals 79-4411001 Panel-Mounting Non-Indicating 3AG Cartridge-Type Fuse Post 034482.02 Power Supply Chassis 034544-01 Fuse Block Cover 037243-01 Metal Base Plate (goes under the power supply)

037639-01Label for Fuse Value(F1)
037641-01Label for Fuse Values(F2-F6)

Line Voltage Range 90-110 VAC (100) 105-135 VAC (120) 200-240 VAC (220) 220-260 VAC (240) Voltage Selection Plug Wire Color Violet Yellow* Blue Brown *This is the only plug provided on the North American power supply.

NOTE A037671-01 power supply assembly has the 120V plug A037671-02 has the 100V, 220V and 240V plugs A037671-03 has the 220V and 240V plugs

3-22 A037671-xx B

Page 45

Dig Dug™

YOUR COMMENTS, PLEASE! tat printing

Your comments will assist Atari in improving the usefulness of our publications. They are an important part of preparing for revisions of game manuals. No postage stamp is necessary if mailed in the U.S.A.

If you have any technical questions about certain ATAR! games products, or are requesting additional publications, we will immediately forward your note to the appropriate person.

Page: Comments:

Fill in if you wish a reply:

Name.

Firm C Distributor Address O Operator City State Zip Co Other

City State Zip Co Other.

Area Code Phone

Page 46

First fold

No Postage Necessary if mailed in the United States

bn

BUSINESS REPLY MAIL a FIRST CLASS PERMIT NO. 1004 SUNNYVALE, CA =

POSTAGE WILL BE PAID BY ADDRESSEE bn Atari, Inc. Po Attn.: Field Service/Coin-Op Division =e P. O. Box 427

Sunnyvale, California 94086 PC

a be |

Second fold = sSC=<CS~SsSSsSSSSS

Woy e6pe siy) adey a

Page 47

Warranty

Seller warrants that its printed-circuit boards and parts thereon are free from defects in material and workmanship under normal use and service for a period of ninety (90) days from date of shipment. Seller warrants that its video displays (in games supplied with displays) are free from defects in material and workmanship under normal use and service for a period of thirty (30) days from date of shipment. None of the Seller's other products or parts thereof are warranted.

If the products described in this manual fail to conform ta this warranty, Sellers’ sole liability shall be, at its option, to repair, replace, or credit Buyer's account for such products which are returned to Seller during said warranty period, provided:

  • Seller is promptly notified in writing upon discovery by Buyer that said products are defective;
  • Such products are returned prepaid to Sellers’ plant; and
  • Seller's examination of said products discloses to Seller's satisfaction that such alleged defects existed and were not caused by accident, misuse, neglect, alteration, improper repair, installation or improper testing. In no event shall Seller be tiable for loss of profits, loss of use, incidental or consequential damages. .

Except for any express warranty set forth in a written contract between Seller and Buyer which contract supersedes the terms of this order, this warranty is expressed in lieu of all other warranties expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose, and of all other obligations or liabilities on the Seller's part, and it neither assumes nor authorizes any other person to assume for the Seller any other liabilities in connection with the sale of products under this order.

The use of any non-Atari parts may void your warranty, according to the terms of the warranty. The use of any non-Atari parts may also adversely affect the safety of your game and cause injury to yourself and others. Be very cautious in using non-Atari-supplied components with our games, in order to insure your safety.

Atari distributors are independent, being privately owned and operated. In their judgment they may sell parts or accessories other than Atari parts or accessories. Atari cannot be responsible for the quality, suitability or safety of any non-Atari part or any modification including labor which is performed by such distributor

This document is and contains confidential trade secret information of Atari, Inc.

This document is loaned under confidential custody for the sole purpose of operation, maintenance or repair of Atari equipment and may not be used by or disclosed to any person for any other purpose whatever, and remains the property of Atari, Inc.

Neither it nor the information it contains may be reproduced, used, or disclosed to persons not having a need to know consistent with the purpose of the loan, without written consent of Atari, Inc.

Page 48

: “ATARI . = : = = = "790 SYCAMORE DRIVE © a! aS: P.O. BOX 906 s =

  • MILPITAS, CALIFORNIA 95085 " = ® 108/942-3100 © TELEX 35-7488,