Super Chexx
Super Chexx (EM Bubble Hockey) (ICE, 1996) · Manual · 23 pages · 30 sections · original scan
SUPER X.
OWNERS AND SERVICE MANUAL
INNOVATIVE CONCEPTS IN ENTERTAINMENT INC. 10123 MAIN STREET, CLARENCE, NY 14031
SERVICE: 1-716-759-0360
FAX: 1-716-759-0884
E-MAIL: service@icegame.com
INNOVATIVE CONCEPTS IN ENTERTAINMENT, INC.
COPYRIGHT®© 1983 BY INNOVATIVE CONCEPTS IN ENTERTAINMENT, INC. ALL RIGHTS RESERVED
No part of this publication may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use, without the permission of the publisher. The SUPER CHEXX" game play, all graphic designs, this technical manual, its accompanying schematic diagrams, and the trouble-shooting guide are protected by the new Copyright Act of 1976. This Act provides for increased penalties for violating federal copyright laws. Courts CAN IMPOUND infringing articles while legal action is pending. If infringes are convicted, Courts can ORDER DESTRUCTION of the infringing articles. In addition, the Act provides for payment of statutory damages of up to $50,000.00 in certain cases. Infringes may also have to pay costs and attorneys’ fees, fines up to $25,000.00, and face an imprisonment of up to one year. |.C.E. will aggressively enforce its copyrights against any infringes. WE WILL USE ALL LEGAL MEANS to immediately halt any manufacture, distribution or operation of a copy of any product made by us. Anyone who purchases such copies risks forfeiting such a game. U.S.A and foreign patents pending.
Published By: INNOVATIVE CONCEPTS IN ENTERTAINMENT, INC. 10123 MAIN STREET CLARENCE, NEW YORK 14031
Sales: 716 759-0370
Service: 716 759-0360
Email: service@icegame.com www.icegame.com
TABLE OF CONTENTS
SUPER CHEXX" Game Play ...........:::::0:ceeeees Page 4
Outstanding Features ........ ce eeeeeeeeeneeeeneees Page 6&7
PLrOQrarmmMing .............eeceeeeceeeeeeceeeeeeeeeeneeeeeeeeeeees Page 9
Game ASSEMDIY 0.0... ee eceeeeceeeeeteeeeneeeeeenteeeeeeeees Page 10
Game Operation Test ........c cc eeeeeeeesneeeeeneees Page 10
Maintenances .............cecececeeeeeeeceeeeeeeseeseeeeeeeeneees Page 11 & 12
Troubleshooting and Repair ..........eeeeeeeeeenees Page 13 THRU 17
Parts Listing ........ ce eeseeeesseeeeeeeeeeeeeeeeneeeeneeeeeeea Page 18
Schematics & Wiring Diagrams ............. eee Page 19 THRU 25
Warranly ......0...ccccccecceeeeeeeeeceeeeeeeeeeaeeeesesnaeeeeees Page 26
SUPER CHEXX" GAME PLAY
The SUPER CHEXxX" Hockey game has been designed to resemble “real” hockey action. The object of the game is to out-score your opponent before time runs out. Goals can be scored, with the game continuing, until the “last puck in play” mode begins. When the last puck in play is scored, the game ends.*
Example: If a score is 5-3, the last puck would result in a final score of 5-4 or 6-3.
*The exception to this rule occurs when a final puck would create a tie score.
Example: If the score is 2-1, the last puck might make the score 2-2. The game then automatically goes into a “Sudden Death Overtime” mode and a final tie-breaking puck is ejected. The game will end when the tie—breaking goal is scored.
The National Anthem, as well as the “Boo” sound and the “Ooh’s” and “Aah’s” add to the excitement of playing SUPER CHEXX". The “Boo” button can be used to eliminate the National Anthem or to “Boo” your opponent.
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
FEATURES
UUPER CHEXx" is a unique kinetic action hockey game, ising state—of—the—art components, electronics, and idvanced sound effects designed to closely resemble the ction, play, and feel of a real ice hockey game.
BREAK RESISTANT POLYCARBONATE DOME
The cover of this game is made of Lexan and will resist breaking or cracking.
(OVERHEAD SCOREBOARD
‘cores and shots on goal are automatically tabulated by the ain processor unit and displayed here. Other features include a running time clock, digital period display, and a iuorescent light that produces minimal heat eliminating the eed for a fan.
UNIQUE SOUND EFFECTS
The sound effects in this game use state-of-the-art omponents. Along with synthesized organ chants, this
bame utilizes natural sounds actually recorded at a real
jockey game. Cheers can be noted when a goal is scored. “Oh” sounds are produced when a puck enters the goalie’s rease. Organ chants indicate period changes, last puck in lay mode, and sudden death overtime. A player can ctually “Boo” his opponent by pressing the “Boo” button located at each end of the cabinet. Added to all these ounds are a full-time background noise and a National
an at the beginning of each game. A player can even
pass the anthem if desired by pressing the “Boo” button. GEAR / CLUTCH DESIGN
ach player on the game rotates on a 2.4:1 gear echanism, which utilizes a built-in clutch to allow opposing layers to strike or check one another without causing lamage to components. This feature also eliminates intentional abuse. The gearing mechanism has been lesigned to allow a player to rotate at maximum speed with minimum of effort. CENTER ICE FACE OFF
This hockey game has a center ice face-off feature to add to the realism of play. The puck is automatically ejected once at the beginning of the game and once after each goal. The puck may be ejected manually by pressing the Boo/Eject buttons.
NEW ROD MATERIAL
Unlike previous games using rods that bend or break easily, SUPER CHEXX" uses rods with a specially developed fiberglass composite and exterior coating to eliminate previous problems. These rods are immune to even torturous abuse. They can bend almost 90 degrees and still return straight time after time.
PLAYERS
LONG STICK PLAYER — 1 PER TEAM
SHORT STICK PLAYER - 4 PER TEAM
GOALIE — 1 PER TEAM
layers to even further enhance realism and enjoyment of
Pavers CHEXxX" has realistic three—dimensional decorated
lhe game.
FEATURES
(GAME CABINET
The cabinet is of unitized construction using high quality luminum for strength, durability, and reliability. Threaded
ise are used throughout the cabinet to make removal
ind installation of parts in the cabinet fast and easy.
(GAME BASE
[The base design is a first in the game industry, using a one-piece high impact plastic material versus conventional ood or particleboard cabinetry. It is impervious to liquid pills as well as many other typical abuses to which games re subjected. The coloring has been molded into and hroughout the base, eliminating the effect of scratches hat harm the appearance and beauty of the game.
ADJUSTABLE TIME AND VEND PRICE
The time and vend price of the game can be adjusted individually by switches on the main PC board. Time can e set for two, three, four, or five minutes. The vend price an be adjusted for $.25, $.50, $.75 or Free Play. Any ombination of time and price can be used.
ELECTRONICS ACCESS
All of the SUPER CHEXxX" electronics are located on a ingle PC board just inside the coin door. All IC’s are
fact accessible and mounted in high quality sockets
implifying repairs.
SCOREBOARD ELECTRONICS
[The scoreboard electronics, designed with state—of—the— rt circuitry, are very reliable. If any repair should be
hecessany the scoreboard can be replaced in less than (5)
inutes, eliminating costly down time.
SPEED OF PLAY
The play of the game is extremely fast. A unique ramp onstruction eliminates dead spots and a special finish on he highly polished playfield enhances the puck action. The gearing ratio (described earlier), used for fast and
ones play and rotation, provides for greater speed and
iccuracy when shooting the puck.
(QUICK ASSEMBLY
The game, designed in two pieces with an upper and a lower half, can be assembled and connected in less than 5)) minutes. OVER / UNDER COIN DOOR
n industry standard over / under coin door is used in the UPER CHEXX" game.
PRESS THE PROGRAM (PGM) BUTTON OF THE MAIN P.C. BOARD. (THIS IS THE LEFTMOST OF THE 4 BUTTONS).
PRESS THE SELECT (SEL) BUTTON TO ADVANCE THROUGH THE
VARIOUS PROGRAMMING OPTIONS.
PRESS THE STEP (STEP) BUTTON TO CHANGE THE VALUE OF THAT)
PARTICULAR PROGRAMMING OPTION.
WHEN FINISHED, PRESS THE PROGRAM (PGM) BUTTON TO
RETURN TO GAME PLAY MODE.
optional ticket dispenser) GAME OPTIONS
- COIN 1 (COINS PER CREDIT) SET THIS VALUE FOR HOW MANY COINS IT WILL TAKE FOR 1 CREDIT.
- COIN 2 (COIN 1 EQUIVALENT) SET THIS VALUE TO 1 IF YOU WISH THE VALUE TO BE THE SAME AS COIN 1 (IF YOU WISH THE VALUE TO BE TWICE AS HIGH, SET TO 2. IF YOU WISH THE VALUE TO BE THREE TIMES AS HIGH, SET TO 3, ETC&).
- TIME UNITS PER PERIOD SET THIS VALUE TO 20 FOR
HOCKEY, OR 15 OR 30 FOR SOCCER.
- TIME PER PERIOD SET THIS NUMBER FOR THE ACTUAL AMOUNT OF SECONDS PER PERIOD. MULTIPLY THE NUMBER OF PERIODS BY THE NUMBER OF SECONDS YOU CHOOSE FOR OVERALL GAME TIME. EXAMPLE: 60 SECONDS X 3 PERIODS
(HOCKEY) - 3 MINUTE GAMES.
- NUMBER OF PERIODS SET THIS NUMBER TO 3 FOR
HOCKEY, OR 2 OR 4 FOR SOCCER. STEP BUTTON 6. ANTHEM SET THIS VALUE TO 1 FOR THE CANADIAN ANTHEM, OR 0 FOR THE U.S.A. ANTHEM. SELECT BUTTON 7. AWARDS PER GAME SET THIS VALUE FOR THE NUMBER OF TICKETS YOU WANT DISPENSED AT THE END OF THE GAME.
- ATTRACT MODE INTERVAL SET THIS NUMBER FOR THE AMOUNT OF TIME BETWEEN ATTRACT MODE SOUNDS. SELECTING 0 WILL TURN THE ATTRACT MODE OFF.
peGidisiam Rect] Aoivuvoniweedog®
PROGRAM BUTTON
GAME ASSEMBLY
These steps should be followed for initial installation as well as any time the game is dismantled and moved to a new location.
NSPECT INSIDE OF BASE
Check for loose parts or foreign material in bottom.
Inspect harnessing to speakers, coin door and coin meter.
Inspect main PC Board for damage and familiarize yourself with the 15—pin cabinet harness connector and the 8—-pin header for the scoreboard ribbon cable.
Place cabinet on Base oriented with hinge side of cabinet opposite the coin door side of the Base.
Align the two so that the threaded cabinet mounting inserts are visible through the access holes and the mounting holes in the Base.
Install 4 Allen Head mounting bolts with fender washers and tighten with provided T-handle wrench. Connect 15—Pin Connector and Ribbon Cable connector to main PC Board. The locking edge of the ribbon cable connector should face the rear of the base. Do not force or connect backwards or damage will occur.
Plug game into 110 (optional 220) volt GROUNDED AC outlet and turn on PC Board mounted power switch.
Coin-up game and check for proper operation.
Finally, make sure your game is clean. Aclean game looks good, gets more play, and makes more money than a dirty game.
GAME OPERATION — TEST
Before starting a game, check to see that all players rotate smoothly and that all rods move in and out freely.
Insert the proper number of coins to start game. The National Anthem will begin and upon completion, the puck will eject from the ejector chute. Shoot the puck in each net several times to ensure proper operation of the ejector. Each time the puck enters the net; the score indicators on both sides of the scoreboard should indicate the goal scored. Continue scoring until the game ends, checking the score indicators for proper operation. Check to see that the score indicators on both sides of the scoreboard are working correctly. Restart the game. Press the Boo/Eject button to ensure the National Anthem is bypassed. The puck should eject.
After the puck ejects, press the Boo/Eject buttons on both ends of the game to ensure the “Boo” sound is heard and eject Solenoid is activated.
Run the puck through each goal crease. The “Oh” sound should be heard as the puck passes through the crease. Note that a shot on a goal has been registered.
MAINTENANCE
All parts in the SUPER CHEXX" Hockey Game have been manufactured to the highest standards possible. The following maintenance should be performed as recommended to assure optimal performance and longevity of the game.
Most mechanical maintenance jobs, when required, will necessitate removal of the dome and / or ice surface. In all cases, when the ice surface must be removed, follow the ice surface removal procedure as given. PUCK
Inspect the puck for large gashes, which may impede a smooth rolling action down the puck ramps. Replace if necessary. PUCK RAMPS
Periodically check the puck ramps for dirt accumulation and / or other objects or materials that may cause the puck action to slow down. To clean the ramps, remove the goalies. Slide all players to center ice (this saves time, as all the players and ice surface do not have to be removed). Bend up the ice on either end and remove the nets. Clean out the tracks and reassemble.
SCOREBOARD LIGHTS
Replacement is advised when necessary. Remove the four screws on the light diffuser and pull out the bulb. Insert the new bulb and reassemble.
Mechanisms should be cleaned and adjusted when necessary. Follow the manufacturer’s instructions on adjustment and maintenance. PLAYER WASHERS
These washers, located over each gearbox, serve to keep the players shafts in place in their gearboxes. Extreme care should be exercised when pulling out or pushing in players because a washer that falls into a track can be bothersome to remove. To help eliminate this problem, push all the rods all the way in, and pull the player straight out. When pushing a player back in, be sure the gearbox is lined up with the shafts. If not, slowly rotate the rod while pushing down on the player.
SOUND EFFECTS
Periodically test the sound effects, sensors, and the “Boo” button to ensure the proper functions. Test for National Anthem bypass.
MAINTENANCE
ICE SURFACE
The ice surface should be cleaned as needed, using Windex", Fantastic", or a comparable product. Apply liberally to a lint-free cloth, wipe surface thoroughly, and let dry. For a “faster” ice surface, dust lightly with Pledge" and let dry.
DOME
The Lexan dome should be cleaned as needed, using a furniture polish type of cleaner. Apply to a lint-free cloth and wipe dome thoroughly.
PLAYERS
Periodically inspect the players for appearance or possible damage. Replace when necessary.
EJECTOR MECHANISM
Periodically test the mechanism by scoring goal and observing puck ejection. If puck fails to eject, does not clear ice surface, or ejects with excessive lean in one direction, the mechanism is not working correctly. Open the dome and remove the ice surface.
PIVOT, SCREW
MAINTENANCE
GEARBOXES
Gearboxes should be inspected periodically to ensure smooth operation. Gearbox tracks should be kept as clean as possible. If a gearbox seems to rotate stiffly, first check to see that a rod collar is not pushed up tightly against it (this can happen if a grip comes off arod anda gearbox hits a solid object, usually on defensemen). Back off a collar from a gearbox by loosening, moving, and retightening.
ROD BEARINGS
Check once a year for excessive wear. Replace when necessary. “<4 PUCK CHUTE
Clean periodically to ensure a good sliding surface. Check for cracks. Small cracks can be glued with a C/A adhesive. Large cracks require changing the part.
GOALIE MECHANISMS
Check for smooth operation.
RODS
Check periodically for cracks and gouges. Replace if necessary. Clean Mineral Spirits or Paint Thinner. Do not allow cleaner to contact the Dome, as it will damage the Dome.
TRACKS
Check periodically. Clean by pushing a rag along the length of the track.
SENSORS
These should be tested periodically by moving the puck over the “Oh” sensors and through the score sensors.
TROUBLESHOOTING AND REPAIR
PUCK WILL NOT EJECT
For some ejection problems the ice surface may have to be removed.
- Opening the dome and sliding all of the players to the center ice can correct dirt in the puck ramps. Next, remove the goalies one at a time, bend up the ice surface and clean the ramps. Assemble in the reverse order.
A leaning puck ramp can be corrected by observing which way the puck leans as it rolls down the ramp and bending the ramp to one side or the other, back by the net chute assembly.
- Apuck ramp may become pushed up during shipping or moving. Just push it back down in the retainer/chute with a pencil or screwdriver.
- Aunique electronic circuit incorporated on the main PC Board prevents the eject solenoid from burning out. If a solenoid problem is suspected, check for a pulse of about 12 volts at the solenoid. Then remove the wires to the solenoid and check that the coil is not open or shorted. A good solenoid will read between 3-4 ohms.
A puck hitting the ice surface can be corrected by first making sure the ice surface is in place. If it is in place, observe which way to bend the retainer chute assembly to line up with the opening in the surface.
To determine if the ejector wire is misaligned, first
e o
" remove the ice surface and then start the game. Look straight down the ejector chute and observe how the puck ejects. If the puck consistently hits one side of the chute, the ejector wire should be adjusted. Refer to the maintenance section for specific directions, under “Ejector Mechanism.”
Mm
eal
TROUBLESHOOTING AND REPAIR
GEARBOX IS DIFFICULT TO TURN
LE A gearbox—coupling collar may have been forced against a gearbox causing uneven or difficult turning. The usual cause for this is a handle grip coming off a rod and allowing the gearbox to hit either another gearbox or a cabinet end. To repair, simply loosen the collar and back it away from the gearbox between 1/32” and 1/16”.
PLAYER ROD & GEAR BOX SHAFT MUST MEET IN THE CENTER OF COLLAR SLOT
Retighten.
Gear teeth being stripped out will generally cause binding at certain points of rotation. This situation should not occur until many games have been played. However, to check for bad gears, first remove the gearbox from the game. Loosen the gearbox collar and slide out the gearbox. If teeth on gears are worn out, replace the gearbox.
A worn gear bearing can cause a gearbox to work improperly. If you suspect a gear problem, first remove the gearbox from the game. If no problems are visible, disassemble the gearbox. If a worn bearing is found, replace the gearbox.
GAME LIGHTING DIM
1. The scoreboard bulb may be burned out. Open the dome and see if the bulb appears to be burned out while the game is plugged in. Unplug the game. Remove the screws holding the right diffuser in place. Replace the light bulb and reassemble.
Very low AC power will cause poor lighting. To test, use a voltmeter on the suspect line to determine voltage. ACHEXxX" game hooked up to a line with too many other games may experience this difficulty. Move the game to its own AC line if this problem is experienced. NO LIGHT IN GAME
1. The light bulb may be burned out. Open dome see if bulb is burned out. Replace if necessary.
Aloose scoreboard connector is not likely to affect the bulb without affecting some other component in the scoreboard. However, make sure the connectors are firmly seated.
PLAYERS RUN INTO THE END OF THEIR SLOTS
1. Arod collar slipping may cause a player to hit the end of a slot in an ice surface. Open the game and rotate the rod until you can see the rod and gearbox touch, through the slot in the collar. If the rod and the gearbox do not touch, loosen the collar make sure the rod and gear box coupler touch, and retighten the gearbox. Be sure to leave 1/32” to 1/16” between the collar and the gearbox body.
SCORE INDICATORS DO NOT WORK PROPERLY
1. Abad LED may cause malfunction. Replace the scoreboard and run electronic tests on the faulty unit.
Abad scoreboard chip may cause indicator malfunction. Replace the scoreboard and run electronic tests on the faulty unit.
A loose connection may cause malfunction. Check and repair as necessary.
GAME LOSES PLAY SEQUENCE. GIVES FALSE SCORE, WILL NOT START WHEN MONEY IS INSERTED
1. Although game is protected against static electricity, an unusually large shock will cause the microprocessor to lose sequence. To correct the problem, turn off power and turn it back on to reset electronics.
Agame plugged into an ungrounded outlet has no protection from static electricity. A large enough shock may destroy the IC chips. Electronic tests may be run to determine the fault. Repair as necessary .
TROUBLESHOOTING AND REPAIR
COINS NOT REGISTERED CORRECTLY
- Abad micro—switch may be a problem due to internal failure. Test with an ohmmeter. Replace if necessary.
- Loose connections may cause money to be registered improperly. Check the connectors from the coin mechanisms, as well as the connectors on the main PC Board. Repair if necessary.
- Abad capacitor (CZ5) on the main PC Board may cause bounce problems with the micro—switch. Run electronics tests to determine the problem.
NO “OH” SOUNDS OR REPEATED “OH” SOUNDS
- Short or open circuits in the harness or one of the reed switches on the “Oh” sensors are the most common problems. Repair as necessary.
- Abad IC chip on the main PC Board may cause problems. Run electronics tests. Repair defective components.
SCORE IS NOT REGISTERED-NO CHEER
- Abad Reed Switch may cause a goal not to register. Disconnect and test with an ohmmeter. Replace if defective.
A bad connection could be a problem. Check associated harnessing and connectors with an ohmmeter.
SCORE IS NOT REGISTERED-GAME CHEERS
- Ascoreboard connector may be loose or bad. Repair or correct as necessary.
- Abad scoreboard IC chip may be a problem. Replace the scoreboard and run electronics tests to determine the problem.
SCORE AND CHEERING KEEPS REPEATING FOR ONE TEAM WITH NO GOALS ACTUALLY BEING SCORED
- A Reed Switch shorted to the cabinet will cause this problem. Usually an exposed wire touching the cabinet will be the cause of the problems.
- A Reed Switch, always closed, can be tested by first disconnecting it from the board. Use an ohmmeter to see if the switch is always closed. If it is, replace the score Reed Switch.
SOUND GOES LOW OR GOES ON AND OFF
- Check the audio IC chips on the main PC Board. Replace any defective parts.
- A faulty volume control is a possible cause for intermittent sound. Rotating the volume control will usually show a problem. Many times, the problem can be corrected by cleaning with a commercially available switch cleaner.
- Abad speaker connection to the main PC Board may be the problem. Check and repair as necessary.
PLAYERS RUB ON THE SIDES OF THEIR SLOTS
- Onrare occasions a track may become bent, forcing the player to work improperly. If, when the ice surface is properly located, you can see the top of an aluminum track, the track must be bent.
Use a large screwdriver or other suitable object, and gently pry in the desired direction to obtain clearance. Check for smooth operation.
TROUBLESHOOTING AND REPAIR
TOP CABINET ASSEMBLY
WITH ICE SURFACE & PLAYERS INSTALLED
PLAYER WITH LONG STICK
PLAYER NUMBERING AND LAYOUT
18 Long 12 Short
6 Short 4 Short
30 Goalie 14 Short 14Short 30 Goalie
4 Short 6 Short
12 Short 18 Long
TROUBLESHOOTING AND REPAIR
TOP CABINET ASSEMBLY
WITH ICE SURFACE & PLAYERS REMOVED
BOLENOID
IE Lal GOAL! \/ EJECTOR§ q. ‘ i
i, i ; a 5 “ r — my nS 23 a aes i
BRIG HT ap ———
ROD BEARING
PARTS LIST
1002X 1003X 1004X
1007X 1008X 1009X 1010X 1012 1013 1014
1016 1018 1019
243X
2001 2003 2007
SC2070X 2071
2368
3001 3002 3002A 3004 3005 3006 3007 3008 3009 3010A 3010X 3011 3012X 3013X 3014 3016 3017X 3018 3020 SK321 SK322 DECAL (CABINET) (NEW STYLE) ROD COLLAR (LONG) ROD COLLAR (SHORT) GOALIE TRACK GOALIE SWING ARM PLAYER TRACK 1 & 8 EACH PLAYER TRACK 2 & 7 EACH PLAYER TRACK 3 & 6 EACH PLAYER TRACK 4 & 5 EACH CTR. EJECT RETAINER CHUTE PUCK RAMP ASSY. SCORE SENSOR BRACKET SOLENOID STOP BRACKET DOME HINGE GOALIE BEARING ASSY. CENTERMAN STOP EJECT SOLENOID BRACKET DISPLAY PCBA PL 7 TRANSFORMER PL 7 BULB PL 7 SOCKET SCOREBOARD PCBB BOO BUTTON SPEAKER SOLENOID MAIN PCBA TRANSFORMER IC EPROM IC MICROPROCESSOR SCOREBOARD HOUSING SCOREBOARD COVER DOME CHUTE/NET ASSY. NET CURTAIN NET MOUNT TUBE (LONG) NET MOUNT TUBE (SHORT) GOALIE BLOCK GOALIE TRACK MNT. TUBE PLAYER LOCK WASHERS BUMPER STANDOFF GOALIE KNOB & ROD ONLY GOALIE ROD W/ SWING ARM. “D” FLECTOR GEARS PUCK ASSY. EJECTOR ARM BUSHING ROD BEARING GRIP BUMPER ASSY. NET RAMP ROD GRIPS PLAYER ROD 1, 5, 6, 10 WINGERS PLAYER ROD 2, 4, 7, 9 DEFENSEMEN 3025X 3035 3036 4002 4003 4004 5003 5005 5011 6001 6001B 6006 6010 6011 6021 6024 6025 6036
6067
6287 6706X 6707X 6707A 6711X 7001X 7002X 7005A 7007B 7008A 7010B 7025B 7030X 7118 ICE SURFACE ASSY. PLAYER ROD WASHERS DOME WASHERS GOALIE BUMPER STOPS CABINET GASKET PER PC. (10 FT.) COLLAR RUBBER SPEAKER GRILL EJECTOR ARM EJECT. SOLENOID SPRING DOME FASTENER DOME BOLT ALLEN WRENCH 1/4 — 3/8 SHOULDER BOLT GOAL. CLUTCH-O-RING GOAL. ROD WASHER SOLENOID RIVET DEFENSEMAN STANDOFF BOLT VINYL STANDOFF TUBING COLLAR ALLEN WRENCH COLLAR SCREW FENDER WASHER COTTER PIN BASE TO CABINET BOLT 5/16-—18 X 1 3/4 OH SENSOR ASSY. W/REED SWITCHES SCORE/EJECT SENSOR ASSY. 1” REED SWITCH-SCORE/EJECT RIBBON CABLE ASSY. GOALIE & BLOCK ASSY. WHITE/BLUE GOALIE & BLOCK ASSY. WHITE/RED PLAYER (LS/SC) WHITE/RED PLAYER (LS/SC) WHITE/BLUE PLAYER (SS/SC) WHITE /RED PLAYER (SS/SC) WHITE/BLUE DECAL (BOO/EJECT) BLACK GIGARETTE DECAL DECAL (BASE) (NEW STYLE)
#279X-BASE HARNESS. “DOES NOT INCLUDE POWER CORD. 250 FLAG #688
| conn2—] | 1 | com | ||
| blag | 2 | 250 FLAG | ||
| cent-| | 3 | at | #646 | ||
| pn | a | baci | ic | COIN CoM |
cocom| | 5
| +iav| | | 6 -REQ_ ws | 250FUAG | Wo, | |||
| rRaMe| | | > | [GREENVELLOW | 20 | en | brown | #648 |
| SND] | 8 | sown | aa" | | | S | |||
| cont] | | 9 | wss0 | ||||
| ace | | 10 | Geen | En | Q | =o | en | ||
| GND | | 14 | [Ere | Sg | 5y COUNTER | |||
| SPKRT. |_| 12 | 30 | " | ||||
| Green © 5 | = | a #651 |
12 PIN PLUG #2106 #038
| SPLIT PIN #2100, | a | ptue | SPEAKER | SPEAKER |
| PIN 440 USE PART 20-14 AWG #8260 | 4698 | ay |
#651
orsTRIP #SC2027X-POWER 20. a) spc20217 @2 CORD emit)
Te SUPER CHEXX
FILENAM #279X-BASE HARNESS E SC_VSD.VSD DESCRIPTION
| QTY|1]. | PER GAME | #$C2027X-POWER CORD | DRAWNBY | CHERVLZ1 | |
| DATE | 3/1/00 | REVISED | 6/27/01 | PAGE | 10F4 |
| 4 | 3 | 2 |
3 2 1
#278X-CABINET HARNESS
7 yellow 93 260 6597 gay gk} 250 4653
a" red | 2 red-red brown} 4
| SOG -| | | 1 | [ORANGE | { |
Evect+| | 2
| +1av| | | 3 | \ | #2089R.2 PIN RT< CONN |
Gnd | | 4 +i2v| | 5 6 “ .
| Boocom| | 7 | ae | . | 88 | Keble oA ¥651 |
GOAL COM] | 8 +
| eyecT-| | | 9 | [ORANGE | ' |
| B00 1] | 10 | }2ee— | blue pam #651 |
B00 2] | 11 +2 GOAL 1] | 12 }oe ——______ ORANGE fy ye51 EVECT+ GoaL2| | 13 eRe ORANGE _ i] #651 sot | | 14 pow soee |_| 15 | McK __ 78 PIN PLUG #2144 #651 SPLIT PIN #2100 800 2 Ieblue oe a 250#653T Gow > 250 #6537
\ 75° red | 2 Black | 1 #2089R-RT<2 PIN CONN
| ue) | #639 | = | #8068 = TO HINGE |
CASHBOX & 74 AWG GREENTYELLOW a) ; PART OF #278X TITLE SUPER CHEXX pLENAMSC_VSD..VSD DESCRIPTION #278X-CABINET HARNESS ORAWNBY — CHERYLZ1 DATE 3/1/00 REVISED 6/27/01 PAGE 20F4
| 4 | 3 | 2 |
4 3 2 1
#6711X- RIBBON CABLE ASY
| #2239-KEY | 1 | 60" OF RIBBON CABLE #6711 | 1 | +#2239-KEY |
2 2 3 3
| 4 | 20" OF TAPE | 4 |
é “START 6" FROM THE 4
| 2 | CONNECTOR | S |
8 8 9 9 wasexey || 10 40 || #2230Kev
#2104-10 PIN MTA CONN #2104-10 PIN MTA CONN
TP #6711XO-OLD STYLE RIBBON CABLE ASY 2 2 PIN CAP #2181 MALE4 AWG PIN #2422
| #2239-KEY | 1 | 60" OF RIBBON CABLE #6711 | 1 | #2239-KEY |
2 2 3 3
| 4 | 20" OF TAPE | 4 |
é “START 6" FROM THE A
| o | CONNECTOR | - |
8 8 9 9
| #2230-KEY | 10 | 10 | +#2239-KEY |
#2104-10 PIN MTA CONN #2104-10 PIN MTA CONN
TITLE SUPER CHEXX
cLENM SC_VSD.VSD DESCRIPTION DRAWN BY CHERYLZ1
DATE 3/1/00 REVISED 6/27/01 PAGE 30F 4
4 3 2
4 3 2 1
fe) ° pe | o #281XS-SHORT HARNESS o |e
#243x. #243x. ° DISPLAY ASY DISPLAY ASY °
s|o #281XS SHORT HARNESS 5 | ee ° °
° ° p2 | O | ° | pt
#343-OVERLAY (GOAL) #343A-OVELAY (SHOTS ON GOAL) ° #341-HOUSING 7 #342-SCOREBOARD COVER #657-SPIDER NUT (SPIDER MTG.PLATE) #243X- DISPLAY ASY #249x- DISPLAY ASY
#249-PL7 BULB PL yo PLAYFIELD o | & 3 BULB °
#2001X-INTERFACE CBA AS
#281XS-SHORT HARNESS ~T #281XS-LONG HARNESS
brown 2 3
| 1 | [red | 1 |
2 [orange 2 3 3
| i yellow | 4 | TITLE | SUPER CHEXX |
5 [green s BLEW 56 vgp..VSD
| 7 | ak.blue | 7 | DESCRIPTION | #341X-SCOREBOARD HOUSING |
8 FOR a FOR 8 pRAWwNBY — CHERYLZ1
| wonerioc | fans | #2002-6-P IDC | DATE | 3/1/00 | REVISED | 6/27/01 | PAGE | 40F4 |
4 3 2 1
Warranty
|.C.E warrants all components in the SUPER CHEXX" game to be free of defects in materials and workmanship for a period of ninety days from the date of purchase.
This warranty does not cover items damaged due to normal wear and tear, subjected to abuse, improperly assembled by the end user, modified, repaired, or operated in a fashion other than that described in the service manual.
If your SUPER CHEXX" game fails to conform to the above-mentioned warranty, |.C.E.'s sole responsibility shall be at its discretion to repair or replace any defective component with a new or remanufactured component of equal to or greater O.E.M. specification.
1.C.E. will assume no liability whatsoever, for costs associated with labor to replace defective parts, or travel time associated therein.
|.C.E.'s obligation will be to ship free of charge, replacement parts by U.P.S. Ground, U.S. mail, or other comparable shipping means. Any express mail or overnight shipping expense is at the cost of the purchaser.
Products will be covered under warranty only when:
The serial number of the game with the defective parts is given.
The serial number of the defective part, if applicable, is given.
Defective parts are returned to I.C.E., shipping pre—paid, in a timely fashion, if requested by I.C.E.
A copy of the sales receipt is available as proof of purchase upon request of I.C.E.
|.C.E. distributors are independent, privately owned and operated. In their judgment, they may sell parts or accessories other than those manufactured by I.C.E. We cannot be responsible for the quality, suitability, or safety of any non-I.C.E. part, or any modification, including labor, which is performed by such a distributor.