CATHODE RAY TOMES

Pole Position Tech Update (Jan-06-1983)

Pole Position Second Edition (Atari, 1983) · Document · 2 pages · original scan

Page 1

JK conan care cen ATARI

January 6, 1983 Atari Incorporated 1265 Borregas Avenue PO Box 427 NEW GAME Sunnyvale California 94086

“SECOND EDITION’ TECHNICAL UPDATE “SECOND EDITION’

POLE PosITIoN™

o Fuse F-3 used in the Power Supply Tray is a 25 Amp fuse. If the F-3 label indicates a 20 Amp, change label to show 25 Amp fuse. Also, make the appropriate change to the schematic (SP-218) on page 3B.

a Make the following changes to the Service Manual TM-218:

Page 1-6, Figure 1-4: The On/Off positions of the PCB option switches are reversed. Actually up should be Off and down should be On.

Page 3-11, Steering Wheel parts list: The Radial Optical Coupler Part number should read G80860—@@2 The -01 is not and should not be used. 137002-00

Page 1-9, Switch Settings: Staple the accompanying Pole Position Qualifying Time to this page. The table lists all the qualifying time for each starting pole position and difficulty levels. You may want to make an extra copy to staple inside the game for easy reference.

Page 2

Page 2

Switch Settings for Qualifying Lap Times

ouSelf-TestLevel
OptionPracticeotBeat This Many Seconds
SwitchesRankOlfficultyto Quailfy for Position:

1 2 3 1 2 3 4 5 6 7

On Off OnFEasy] 68 70 73 73 7 8
Of Off On&v2 67% 70 72% 74% 78% «79
On On OnHSv 61 63 66 6 70 72
On On Offfe}3 61 63 Ss 7 a ral
Off On Offc<BY 88 62 6 6 3 7
On Off Off85B 60 62 64 cS] i] 7
Ot Off OffAwy 8 61 6 6 67 a
Off On Onfc}HardEd c) 61 cx) } &7 a

<Manutacturer's recommended settings