CATHODE RAY TOMES

Night Stocker Field Conversion Kit (M051-00E74-A016)

Night Stocker (10/6/86) (Bally/Sente, 1986) · Field Conversion Kit · 23 pages · 18 sections · original scan

Page 1

NIGHT STOCKER FIELD CONVERSION KIT

INSTRUCTION SHEETS

PART NO. AE74-00301-0000

10601 W Belm: Franklin Park, itn oe ee U.S.A.

Phone (312)451-9200 Cable Address MIDCO Telex No. 72-1596

M05 1-00E74~A016

Page 2
WARNING

THIS GAME MUST BE GROUNDED. FAILURE TO DO SO MAY RESULT IN DESTRUCTION TO ELECTRONIC COMPONENTS.

WARNING: This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to compiy with the limits for a CLASS A computing device pursuant to SUBPART J of PART 150f FCC RULES, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense wil! be required to take whatever measures may be required to correct the interference.

ELECTRICAL BULLETIN: FOR ALL APPARATUS COVERED BY THE CANADIAN STANDARDS ASSOCIATION (CSA) STANDARD C22.2 NO. 1, WHICH EMPLOYS A SUPPLY CORD TERMINATED WITH A POLARIZED 2-PRONG ATTACHMENT PLUG.

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

ATTENTION: POUR PREVENIR CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR. UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI! LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.

OUR TOLL FREE NUMBERS FOR SERVICE INFORMATION CONCERNING THIS GAME, OR ANY OTHER BALLY/SENTE™ GAME YOU NOW HAVE ON LOCATION.

CALL US FOR PROMPT, COURTEOUS ANSWERS TO YOUR PROBLEMS

ANSWERS TO YOUR PROBLEMS.

Video - Continental U.S. 800-323-7182

10601 West Belmont Avenue Franklin Park, Illinois, 60131 phone (312) 451-9200

Copyright ©1986 by Bally Sente, Inc. All rights reserved. No part of this publication may be copied by any photographic, mechanical or electronic process, or in the form of a magnetic recording, nor storedin any retrieval system, transmitted, or otherwise reproduced for private or public use without permission from Bally Sente, Inc. The U.S. Copyright Act of 1976 protects the contents of this manual, graphic designs and includes schematics. Bally Sente will enforce its copyrights, Ail legal means to stop manufacturing, operation, and distribution of copy video games will be employed.

Printed in U.S.A M05 1-00139-A004

Page 3

WARNING

The parts contained in this field conversion kit must be installed without deviation from the instructions contained in this manual and kit. Failure to follow these instructions in every detail may result in the creation of illegal interference to radio and TV reception.

BALLY SENTE has verified that this field conversion kit, when installed in the jame cabinets: SAC 1A, SAC 1B, SAC-MAN conversion (E23) or SAC-MAN conversion £48), as specified in this manual, complies with the requirements in Part 15 of the FCC rules for a Class A computing device. Operation of this equipment in a residential area may cause unacceptable interference to radio and TV reception, requiring the operator to take whatever steps are necessary to correct the interference.

BALLY SENTE will not be responsible for incomplete or improper conversions, or installation in a game for which this field conversion kit is not intended. If this conversion kit is installed in a game that is not specified in this manual or in a previously converted game, the operator is required to take whatever steps are necessary to insure compliance with the requirements in Part 15, Subpart J, of the FCC Rules for a Class A computing device.

NOTE: SAC 1A consists of SAC electronics in a wooden cabinet with a large metal front access door.

SAC 1B consists of SAC electronics in a wooden cabinet with a large wooden front access door.

SAC-MAN (E23) is a BALLY SENTE cabinet conversion kit to convert a PAC-MAN, MS. PAC-MAN, or GALAXIAN game cabinet.

SAC-MAN (E48) is a BALLY SENTE cabinet conversion kit to convert a TRACK & FIELD or HYPER SPORT game cabinet.

WARNING?!

DO NOT INSTALL THE NIGHT STOCKER GAME KIT (PART #GE74-00001-0000) IN ANY SAC 1 (TUBULAR METAL FRAME) CABINET WITHOUT ALSO INSTALLING THE SAC 1 UPDATED FIELD KIT (PART #GE90-00001-0000),

THE SAC 1 UPDATED FIELD KIT CONTAINS A FULLY. TEMPERED FLOAT GLASS (U.L. RECOGNIZED) WHICH MUST REPLACE THE EXISTING VIEWING GLASS IN YOUR SAC-1 CABINET.

1!IMPORTANT!!

MONITOR AND FACE GLASS MUST BE CLEANED FOR GUN

TO OPERATE PROPERLY ! !

REGULAR CLEANING WILL HELP INSURE PROPER OPERA~ TION.

!LIMPORTANT!!

MO51-00E74-A017

Page 4

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 5

PAGE 1 OF 4

Night Stocker Game Review

Night Stocker is a one-player first person driving/shooting game. Controls consist of a steering wheel and a hand-held gun secured to the game cabinet on a cable.

Game Description

You find yourself driving the armored car, known as Night Stocker, on an unknown planet. The goal is to capture energy and shot crystals and to destroy the robot force defending the planet.

In the first scene, you are driving at high speed across an alien landscape. You must dodge mines, hazards, and other dangerous obstacles while attempting to reach the next robot installation. You are constantly under attack by a variety of airborne and land-based robot ships and weapons. You can defend yourself by shooting the enemies and their armament with your hand-held gun.

Your gun operates in either single-shot or "UZI" machine gun mode and has vast destructive power. You must, however, conserve your shots and energy shields by capturing colored crystals in the electrical claw mounted on the front of your car.

If you are able to reach the outpost, your car slows to a stop in front of the robot installation. Your job here is to clean out the enemy outpost before they destroy you.

Each of the 16 waves in the game contain unique enemies with a variety of weaponry and each outpost increases in size, complexity, and deadliness as indicated in the following "Night Stocker Enemy Chart". The game also has 2 levels of switch-selectable difficulty with the"Easy" setting being the recommended initial setting.

Attract Mode

When the game is first powered or when self-test is exited, a blank screen with message "Loading" appears for approximately 30 seconds. This is to allow for the sound circuitry to be initialized.

Subsequently, the Title screen followed by the High Score screen will appear. If music in attract has been selected (the recommended default) it will start with the next screen, the Demo screen.

Other screens include the Credits screen and the Enemies screen. Note that the Demo screen and the Enemies screen will explain the scoring possibilities as well as the methods used to capture crystals, recharge shields, and gather more shots.

M051-00E74-A009

Page 6

ZARKS

Pon WAVE NUMBER ENE Y APONRY jeg fewer To ee peepee en PEEP SPEEDERS ie th a pee far | Hie ove acm

DROSIANS See BBEBRSREE RARE EEC ppt pp

) SIMULTANEOUS | | BULLETS | ROBOTS /WAVE

NOTES: 1. . Sentry-class Robots man the robot outposts. . Hard difficulty mode adds 10 robots/outpost. + Speed of enemies increases with each wave. PAGE 2 OF 4

NIGHT STOCKER ENEMY LIST

j eutets |

Sears SESRGRSCBGLA pe — PREECE tT TT Tf |

An X indicates that enemy may be activated in this wave.

M051-00E74-A009

Page 7

PAGE 3 OF 4

Self-Test

Pressing the self-test switch on the chassis will cause the game to enter a sequenced self-test mode. First the RAM (Random Access Memory), the ROM (Read Only Memory) checksums, and the sound Circuitry are tested. Messages indicating the status of this hardware will appear at this point. Pressing the gun trigger will advance to the next portion of the test.

The next two screens in self-test are to help with the set-up and alignment of the gun. First a grey scale appears to help adjust the monitor's contrast and to help achieve a full range of black to white. Next a full white screen appears with a small digital readout indicating the gun's co-ordinates appearing in the upper left corner. Aiming the gun at the screen will cause small blue dots to appear on the screen wherever the gun is pointing. This will allow you to see if the gun is reading over the full surface of the screen. If the gun does not appear to fully reach the sides or the corners of the display it means that the monitor and the protective ground-glass need to be cleaned thoroughly. It_is VERY IMPORTANT! to keep the glass and the monitor clean for proper operation of the gun.

If the gun still does not work after cleaning the monitor and both sides of cabinet glass, check to see that the gun barrel is free of obstructions and that the gun lens is clean. If necessary, carefully wipe the lens with a soft clean damp cloth to remove dirt.

The next screen will readout the status of the switches and analog state of the steering wheel inputs. This allows you to determine if the steering wheel is operating properly or if any of the switches needs repair.

The final two screens are statistics relating to the number of plays and the scores achieved in the game since the last time these numbers were reset in self-test. Note that pressing the Start switch will cause these numbers to be erased and will provide a known starting point for any game stats you wish to coliect.

Gun Interface Board - Theory of Operation

The board contains three sections: a clock generator, an external signal synchronizer, and a position counter/shifter.

The clock generator is self-explanatory. The synchronizer aligns all edges of external signals (HSYNC, VSYNC, OUT 2) with the internal clock.

The position counter/shifter consists of two eight-bit binary counters and two eight-bit shift registers. These are implemented using four PAL16R8 ICS. Each PAL is configured as a four-bit counter, similar to a 74161, and a four-bit shifter, similar to a 7495. The counters are synchronized by HSYNC and VSYNC so as to have the same values as the scan counters on the SAC 1 CPU Board. When the hit detect signal comes in from the gun, the counters freeze. When VSYNC occurs, the information in the counters is transferred to the shift registers for output. The program advances the shift registers with its OUT 2 signal. Four reads are needed to input all 16 bits.

M051-00£74-A009

Page 8

PAGE 4 OF 4

Gun Opto Board - Theory of Operation

The gpto-board consists of a photodiode, a current to voltage converter, an amplifier, and a threshold detector.

Photodiode CR1 produces an output current proportional to the light hitting it. Op-Amp U1 converts this current to a voltage. With the gun a foot from a white screen, the signal on the output of Ul will be in the range of 120-400 mv., depending on the particular photo-diode, monitor brightness and the cleanliness of the optical system. This signal is amplified by Q1 & Q2. The AC component of the output here will be 3-5 volts. Comparator U2 switches whenever Q2's collector goes below 1.3 volts. This output is sent to the gun interface board as a hit.

M051-00£74-A009

Page 9

NIGHT STOCKER

OPTION "gi"

TALI TTTTTT TAT TELAT TT 17) NIBRYOUS GAME PLAY OPTIONS /////////////IIIIT//TIITTITLT

SW#1 SW#2 SWE3 SWH4 SWES SWHG SW#7 SW#B

DIFFICULTY: EASY OFF XX XX XX XX — XX

DIFFICULTY: HARD ON XX XX = XX = XX XX SWITCH SETTINGS DIP SWITCH

NO SOUNDS IN ATTRACT XX XX XX XX XX SOUNDS IN ATTRACT XX = XX XX XXX

  • INDICATED FACTORY RECOMMENDED SETTINGS PART NO. 4051-00E74-A007

NIGHT STOCKER

OPTION SWITCH SETTINGS - DIP SWITCH "HI"

LITTTTTTTTT ALTA T TALL ATT TTL TL COINS PER CREDIT ///L////AITL/ITITTTL TLL

VARIOUS CREDIT OPTIONS SW#1 SW#2 SW#3 SWH4 SHES SWEG SW#7 SW#B

FREE PLAY OFF OFF OFF OFF OFF OFF OFF OFF

  • COIN / 1 CREDIT ON ON 1 COIN / 2 CREDITS OFF ON 2 COINS / 1 CREDIT ON OFF 3 COINS / 1 CREDIT OFF OFF

SIVITITIT ALTA TTT TT ATLL TT 11 COUMS ADD BONUS COINS ////1//T//IITITILTITIHTTI MATT

  • NO BONUS COINS ON +ON ON 2 COINS ADDS 1 BONUS COIN OFF ON ON
3 COINS ADDS 1 BONUS COINONOFF ON

4 COINS ADDS 1 BONUS COIN OFF OFF ON

4 COINS ADDS 2 BONUS COINSONON OFF

5 COINS ADDS 1 BONUS COIN OFF ON OFF

5 COINS ADDS 2 BONUS COINSONOFF OFF

5 COINS ADDS 3 BONUS COINS OFF OFF OFF

  • LEFT COIN MECH X 1 LEFT COIN MECH X 2
  • RIGHT COIN MECH X 1 RIGHT COIN MECH X 4 RIGHT COIN MECH X 5 RIGHT COIN MECH X 6
  • INDICATED FACTORY RECOMMENDED SETTINGS PART NO. MO051-00E74-A007
Page 10

KIT PARTS LIST: NIGHT STOCKER PART NO. GE74-00001-0000

ORDER BY PART NUMBER ONLY

PART NO. DESCRIPTION

AE74-00004-0000 |CONTROL SHELF ASSY. (INCLUDES ITEMS 1 THRU 18)

1 AB96-00008-0000

AB96-00017-0000

AC48-00030-0000

AC48-00029-00XxF

0C48-00117-0000

0¢48 -00908-0000

0017-00101-0124

AE74-00010-00XF

AE74-00014-0000 PLATE ASSY.: W/BEARING

JUMPER CABLE ASSY.

SENSOR DISC ASSY.

HUB & PLATE ASSY.

PLATE: TOP

DISC: 64 POS.

6 X 4 UNSLOTTED HEX W/WASHER SCREW (3 REQ'D.)

CONTROL SHELF WELD INS ASSY.

HAND GUN ASSY. (SEE COMMON ASSY.)

AE74-00016-0000

7 AE74-00017-0000

AB96-00009-00XF

0B96-00702-00XF STEERING CONTROL CABLE ASSY.

STEERING WHEEL ASSY.

BASE & SHAFT ASSY.

CAP: SAND CASTING

0B96-00900-0000 INLAY: STEERING WHEEL

0E74-00909-0000 HUB: SKIRT, STEERING WHEEL

0017 -00009-0604 STEERING WHEEL: Dia. 12"

0017-00101-0271 1/4 - 20 X 12 HEX SOCKET, SOCKET HD. SCREW (3 REQ'D.)

0017-00104-0098

A084-91829-AB96 WASHER (3 REQ'D.)

ROTATION SENSOR BOARD ASSY.

B006-08004-100A TRACKBALL PCB ASSY.

a 0 B006-08032-0108

1 0B96-00112-0000 GUN-INTERFACE BD. ASSY.

BRACKET: OFFSET P.C.

iy 0E£74-00107-00XF SHIELD: GUN

M051-00E74-A006

Page 11

KIT PARTS LIST: NIGHT STOCKER, CONT. PART NO. GE74~00001-0000 QRDER BY PART NUMBER ONLY a

z

M051-00E74-A007 |TAG: OPTION SWITCH SETTING | A€74-00301-0000 kIT INSTRUCTION SHEET ASSY. | | MO51-00C47-A019 [MANUAL: CONVERSION KIT 22 | 0E74-00900-0000 HEADER: ATTRACT 23 | 0017-00009-0484 |KEY: ALLEN 1/8" TAMPER PROOF | 24 | 0017-00042-0310 [CABLE-CLAMP: ADHESIVE KURLY-LOK | 25 | 0017-00103-0052 [NUT 6-32 LOCKING (9 REQ'D.)

M051-00£74-A006

Page 12

HAND GUN ASSEMBLY

PART NO. AE74-00014-0000

M05 1-00E74-A018

Page 13

HAND GUN ASSEMBLY - PARTS LIST PART NO. AE74-00014-0000

ORDER BY PART NUMBER ONLY

DESCRIPTION

AA5S7-00029-0000 |SWITCH ASSY.: TRIGGER

AE74-00011-QOXF |GRIP-ASSY.: PAINTED SET (INCLUDES ITEMS 2 THRU 4)

0E74-00903-0100 /GRIP: RIGHT HAND

0£74-00903-0200 |GRIP: LEFT HAND

0307-00700-0000 |PIN: LOCATING (2 REQ'D.)

AE74-00012-0000 |ARMOUR & SECURITY CABLE ASSY.

0£74-00701-O0XF )CABLE TERMINATOR

0E74-00908-O0XF |SLEEVE: ARMORED-CABLE

0017-00101-0314 |10-32 X 3 HEX SOCKET CUP POINT SET SCREW

AE74-00013-0000 |BARREL ASSY. (INCLUDES ITEMS 6 THRU 12)

BO06-08031-0108 |GUN-OPTO BOARD ASSY.

0£74-00103-0000 |BRKT.: P.C. BOARD

0£74-00700-OOXF | TUBING: BARREL

0E74-00902-0000 |LENS: HAND GUN

0E74-00904-0000 |RETAINER: LENS

0£74-00905-0000 |TIP: GUN-BARREL

0017-00101-0547 |6-32 X 3/16" SLOT. PAN HD. M.S. (4 REQ'D.) [re | |? |

|? |

| 8

| 7 | 8 | | 2 2 |

rar w 0£74-00100-0000 |RETAINER: CABLE

= 0017-00101-0825 {10-32 X 12 HEX SOCKET TAMPER RESISTANT BUTTON HD.SCREW (3 REQ'D.)

oe a 0017-00101-0826 |10-32 X 6 HEX SOCKET TAMPER RESISTANT BUTTON HD. SCREW (2 REQ'D.)

ran a 0020-00243-0000 |PLATE: SPRING

e a 0307 -00908-0000 | TRIGGER: MOLDED

e © 0E74-00102-0000 |BRKT.: SWITCH

M051-00E74-A019

Page 14

Page 1 of 2

BALLY SENTE MONITOR ADAPTER CABLE INSTALLATION NOTICE

The Bally Sente Monitor Adapter Cable, (AE74-00018-0000), as part of the NIGHT STOCKER conversion kit, must be installed in Sente upright mainframe cabinets (SAC 1, SAC 1A, SAC 1B, and SAC MAN) ONLY.

Failure to make this installation results in the loss of the Gun Assembly's signal output. This means that the gun's trigger action would have no effect on the screen.

The purpose of this cable installation is to provide VSYNC & HSYNC signal paths from the existing monitor cable (part of master cable assy.) to the GUN INTERFACE P.C. BOARD of the NIGHT STOCKER control panel.

Refer to the wiring diagram (M051-00E74-A005) and also Figure A in this notice. The Monitor Adapter Cable is installed as follows:

A. Power off your unit.

B. Disconnect the 6 pin connector of the existing Monitor Cable (portion of the Master Cable Assembly) from the corresponding connector in the Main P.C. Board of the Video Monitor.

CAUTION: THe Main P.C. Board connector may be located close to the monitor picture tube. Carefully remove the Monitor Cable connector, to avoid touching the picture tube with your hand.

C. Connect the Monitor Adapter Cable (supplied in your game kit) as follows:

Of the 3 cable connectors, two of them are polarized (fastens only one way). Fasten the polarized 6 position connector to the 6 pin connector in the Video Monitor Assembly carefully to avoid touching the picture

tube with your hand. Fasten the polartied 3 position connector to the

3 position connector (J21) of the Steering Control Cable Assembly.

Fasten the non-polarized 6 position connector (with male pins) to the 6 pin connector of the Monitor Cable such that the wire colors blue (position 4), green (position 5) and red (position 6) of each cable corresponds.

D. Use the plastic "Kurly-lok" cable clamp, provided in your game kit, to position the Monitor Adapter Cable so that it does not rest on anything “electrically hot" in the monitor area.

E. Restore power to your unit and check out electrically.

F. Any problems or questions call Bally Sente Service at our toll-free number 1-800-323-7182.

MO51-00E74-A020

Page 15

Page 2 of 2

BALLY SENTE MONITOR ADAPTER CABLE INSTALLATION NOTICE, CONTD.

FIGURE “A”

MONITOR CABLE (PORTION OF MASTER CABLE ASSEMBLY)

TO CPU BOARD

6 PIN CONN. (W/MALE PINS) TO GUN INTERFACE P.c.. BOARD MAIN P.C.B.. SHIELDED CABLE (PORTION OF GUN INTERFACE CABLE ASSEMBLY) 8 PIN CONN.

MONITOR ADAPTER CABLE VIDEO MONITOR ASSEMBLY 3 PIN CONN.

M051-00E74-A020

Page 16
NOTE i

+

: l 3 LI cs

e

i Ul R4 + m0

ce US: ~m cf oa is CS ca ca ca

Cit U7 ci2 cis Cs 808-8052" 01-28 (a) C8 (om) ¢ (om) __¢s (ome)

P

NOTE
NOTE: POLARIZED TABS FACE INSIDE PCB » PARTS LIST
DESCRIPTIONqry.DESIGNATION
1K OHM 1/4W RESISTOR1R4
4.7K OHM 1/4W RESISTOR1RS
«IMF CERAMIC CAPACITOR10C3, C4, C6-C9, C11-C14
2.2MF TANT. CAPACITOR2c5, C10
2N3904 TRANSISTOR1a2
20.000 MHZ. COSC1cose
74514 1.C.1U5
74.874 1.0.2Ul, v2
BALLY, SENTE INC.74LS174 L.C.1U4
eee74LS260 1.C.1u3
PAL 16R8 (15-8032-10)2Ue, U8
PAL 16R8 (15-8032-11)2U7, U9
—20 PIN I.C. SOCKET4U6-U9
Leexe pesten6 PIN MT100 CONN.1Pl
oe 192112 PIN MT156 CONN.1P2
RAW PCB1-

3% FERRITE BEAD 2 FB1,FB2 3 .01MF AX CER CAP 1 C15 FCC MODIFICATION LIST

2 NOTE: THESE COMPONENTS ARE LOCATED ON SOLDER SIDE OF PCB.

WA Ya THIS DWG. IS CONFIDENTIAL & PROPERTY OF BALLY/MIDWAY MFG. CO. FIRST tscoon A//C HT STOCKER sally | DIM. TOLERANCES UNLESS OTHERWISE SPEC. CONCENTAICITY T.1.R. . 002 PART NUMBER

100E-00005-0061 100E-00005-0079

U300-00009-0100 U310-00013-0100

104E -00001-0006 0304-00804-0007 0A15-00803-0013 U200-00044-0100 U200-00053-0100 0A28-00803-0020 U015-08032-1000 U015-08032-1100 110E-00001-0005 0017-00021-1794 0017-00021-1795 U007-08032-010B 0316-00804-0002

0986-00800-2000

M05 1-00E74-A021

Ferrite. BD. Ff Corkcerioy REV3 XS Fee Movs YS. Reve Velwaecey Conneror Tae YS. Rak Gr PRopuction FRACTIONAL REVISIONS DECIMAL MIDWAY wre. co.

PART NO. HOLE DIA. ANGLE .... FRANKLIN PARK, IL 60131

GUN INTERFACE BD. ASSEMBLY DRAWING

oN DO NOT SCALE DWa. L006 - 08032- 0/08

Page 17

Pi-1 +124

+5¥

OUTPUT

GROUND [_ ——$+ — Pi-4 —» ~— * ¢——_—> >

SPF MICA ct

22k

RS AK

P1-3 >

ca ce ca c7 ce eur Lue tur Stu *#Le. eur

a ae 2N3964 2N3906 crt Cut POLYESTER |

mRD7211K1K39k
RSR6RS

Pl-2@

+4+—_t— os4>

NOTES:

J. SZERSZEN CORRECTED BALLY MIDKAY MFG. CO. iS

GUN OPTO BOARD N@51-00E74-Ag15

SHEET [ OF [ [REV

Page 18

3 PIN CONNECTO! TO GUN INTERFACE

6 PIN CONNECTOR

ON VIDEO MONITOR i BALLY-SENTE MONITOR ADAPTOR CABLE

AE74-00018-9000

6 PIN CONNECTOR TO

EXISTING MONITOR CABLE

remPURPLE[>
<a}BLUE=>
remGREEN[=

A f ut ra a cH H a

gi ' 3! al

VIDEO MONITOR 6 PIN CONNECTOR MALE PINS TO EXISTING MONITOR CABLE

BALLY-SENTE MONITOR ADAPTER CABLE* AE74-90016-0000

*® REFER TO "BALLY-SENTE MONITOR ADAPTOR CABLE INSTALLATION NOTICE". rh RED JS 9 Pos H as oe

WHT-YEL t st WHT-YEL sk WHT-GRY. WHT-GRY oPTO YEL CONTROL BD. ab YEL

=)

—f}— ROTATION SENSOR PC Beaé-ep24~1 908 AB80-91829-ABIE

GRN-RED tl a, OVO & oO 1

f L

4@ CONDUCTOR SHIELDED CABLE

GUN INTERFACE BOARD BGG6-88832-010B

m 4)

B Ed

x a fal

Je. 3 Pos

? WSYNC | 54 CLEAR SHIELD CONNECTED INTERFACE BD 1 Pi 6Pos END ONLY

GUH TRIGGER Su. ra SND 1 e SHIELD f

HsYNC J ah BLK H BLK AE74-88014-0000 Lo ——— 2 CONDUCTOR WITH SHIELD CABLE

SHIELD CONNECTED TO J21 ONLY

lesa BALLY MIDMAY MFG. CO. J._SZERSZEN NIGHT STOCKER CONTROL

"051-90E74-AG05

SHEET 1 OF 1 [REV

Page 19

PARTS LIST

DESCRIPTIONgry.DESIGNATIONPART NUMBER
1K OHM 1/4W RESISTOR4R3, R5, R6, R7100E -00005-0061
10K ORM 1/4W RESISTOR = 1R10100€ -00005-0088
22k OHM 1/4W RESISTOR1RA100£ -00005-0096
33K OHM 1/4W RESISTOR = 1RO100£ -00005-0100
100K OHM 1/4W RESISTOR1R4100£ -00005-0116
150K OHM 1/4W RESISTOR2R1, R2100E -00005-0120
5 PF MICA CAPACITOR1Cl0E74~-00800-0001
.033NF POLY. CAPACITOR = 1c5U330-00007-0100
.IMF CER. CAPACITOR5C2, C3, C4, C7, C81300-00009-0100
_aueence g agezh8fff 52.2MF TANT. CAPACITOR1C6U310-09013-0100
gsz5 | (UEOSeeE G azsbdMRO721 PHOTO DIONE1CRI119€ -00003-0005
2N3904 TRANSISTOR1it104€ -00001-0006
ANove "Fl | Tk it | ||2N3906 TRANSISTOR102104E -00002-0003
+UM SLL Tee1U20E74-00803-0002
aC.1Ul0£74-00803-0001
4-PIN RT. ANGLE CONN. = 1Jt0017-00021-1796
RAW PCB1-007 -08031-010¢

© MARKING ARTW

THIS DWG. IS “T @ & PROPERTY OF BALLY/MIDWAY MFG. CO. 1 on mal STO ally [MIDWAY nec. co. at tt a Pou. Sbabocow | a AES

3.5-7- 86FRANKLIN PARK, IL 60131© PReduct on |

MECH aT E' CH CHK. [MATL ASSEMBLY DRAWING REVISIONS GUN OPTO BD. V006 - 08031-0108 DIM. TOLERANCES UNLESS OTHERWISE SPEC. CONCENTAICITY T.I.R. . 002 FRACTIONAL DECIMAL .. HOLE DIA. x ANGLE ...........+ 12° DO NOT SCALE DWG. So er ~~

Page 20

HIT

HSYNC

outa

VSYNC

12] PR |gPR iis2Ng904
DogDa—ya2

VSYNCHY 12 cK @ & CEN~ YSYNCH. {3 6 7} CLR 74Lsi4 130 bre it 1a 154t874 4raLs74

US

74LSi4 —»— oe

be-$1312es
*fp>o48HSYNC~

us 74LS174 baa f 74Lsi4 se, usw = NCR Be-$ fot z a us i HSYNCHS

P4Lsia SHIFT

pez5 > 6VSYNCHS

U5

tevin 5°;

Bi-g - tur +] 2. 2UF TANT +tevout —5 ts cs

esvour SBT 16Re

SMHZ1SMHZ‘Top vec [22
SHIFT~ 2SHIFTX 219

SHIFT#~ 3 SHIFTHY 3 on oe ias

T44rFa

12 02 5 Sligo té

HSYNC~S6HSYNC~ 6]gy lt8
CENS2CEN~Zi usitt

vsyNc~ 8 VSYNC~ 8) egg [13

VSYNCHY 9VSYNCEY 912Peni

28} ewy oeltt le

jg? Ats74

+5¥IN Lt

+ O1UF sur +_} tant T cis 3 Te 2uF cs-c9 cie ree | Cii-ci4 16R8 16R8

SMHZ1 cp yee 2eSNHZi cp vec 20
SHIFT~ 2198SHIFT. 219

suirtas s|t? elte 74.8260 Pures 3 r oes

HSYNCKY 417,ai6417
S12 oat;S12 oa}?
Hsync~ 6 i = 15ususYNC~ 6 3 EC)
GENS_Z]15 gs |44SEN__7Zli5 asit#

YSYNC~ 8 16 06 [13 ¥SYNC~ 8 16 06 13

VSYNCEY 912VSYNCHY 912Pe-12

E Beye suas

17 97asvuce17 07

18] oun elt 18) own ett

CONNECTOR PIN LIST Pa P2

PIRE~ *12V HIT +5 AN GND GND SH GND su2s +5 HSYNC +12¥ our2 SYNC sW2e¢ suze su20 sues suai R2e-10 shee

REV 2 9-18-86 FCC MODIFICATIONS REPLACE OSC CIRCUIT WITH HYBRID OSCILLATOR, ADD FBis FB2 AND C15 TO S¥ INPUT

REV 1 9-9-86 SH31 WAS SW2S5, ADD P1-5

[NOTES®

SZERSZEN BALLY MIDWAY MFG. CO, J. GUN INTERFACE BOARD M@S1-@8£74~A012

SHEET 1 OF 1 [Rev

Page 21
ccac7ci
(Js af}a]«()cecoj | ceci2
uiauenususausAusau7aveal

ROMCOGEF ROMCD4S ROMCD25 = ROMCO@! ROMABE7 RonRB 45 Ronqe2$ RONABS

usp C19 vee. ces can cee

ciscisHe
auf](al0)

cis:

uicuecusc.usc
Re?GRAScrscrs

uc vec

WS, cas

+ + UN-PROG CARTRIDGE 128K W/SECURE CHIP

(SENTE BOARD NO. 006-8027-01-0B)

CROSS REFERENCE LIST

DESCRIPTION

PCB T4LS139 74LS245 RAM NOV ST 1002 S CAP CER. CAP TANT. SOCKET 28 SOCKET 20 SOCKET 40 CONNECTOR ECURITY CHIP .1M 50V 20% 2.2MF 10V 20¢ PIN PIN PIN AMP 2-102584-0 A082-91834-A000

OTY.

aon oNN eo Nw REFERENCE NO.

U5R usc usc U6R C1-C23 C24 ,C25 U1A-U8A,U1C-U4C u7Cc U6R Pt PART NOS.

A080-91834-A000 U200-00049-0100 U200-00056-0100 U230-00007-0100 U260-00050-O10A JU300-00009-0100 ¥310-00013-6100 110F-00001-0010 u510-09017-0100 110F-00001-0011 U550-00064-0100

REV: Revisions due to type errors on 1/17/86. an Bo 96 M051-00114-A144

Page 22

M051-00R96-A010 Rev. A 9/3/88 ROTATION SENSOR P.C. JRo A084-9 1829-AB96

DESIGNATION LIST

DESIGNATION DESCRIPTION

R\ 82 OHM

OPTO 1 OPTO SWITCH DUAL

vy 4 PIN HEADER ASSY.

PCB ROTATION SENSOR PCB

CROSS REFERENCE

DESCRIPTIONOTY.DESIGNATIONPART_NUMRER
82 OHM1RI100E-00005-0031
OPTO SWITCH DUAL1OPTO 10E74-00804-6001
4 PIN HEADER ASSY.1Jt0017-0002 1-1264

ROTATION SENSOR PCR 1 PCB A080-91829-AB96

A080-91829-AB96 |

POLARIZED

5 3 : “3

ROTATION SENSOR PC JR. r i { ' i t i ' : ' ' ; { ‘ L. co.

BALLY MIDWAY MFG.

BOYDSTON

NOTES? I

SCHEMATIC BRAKING

9718785

ROTATION SENSOR P,

AG84-91829-ABIG MAS1-A9B96-0011

Page 23

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.