Donkey Kong Operation Manual (TKG-2-UP)
Donkey Kong (US set 1) (Nintendo of America, 1981) · Document · 25 pages · 2 sections · original scan
DENREVAKONGT
OPERATION MANUAL
| MODEL NO: TKG2-UP |
- CAUTIONS: ee oO
| 2. SPECIFICATIONS | Tee eee see | 2 |
- INSTALLATION OF THE MACHINE
| (1) Cautions on installation | = | ce easaeaeee | 3 |
| (2) Barthing of machine | = | — ....... pees | 3 |
- MAINTENANCE AND INSPECTION
| (1) Dismounting of front screen | = «see e eens | 4 |
- Dismounting of operation panel — .........4- 4
- POINTS AND METHODS OF ADJUSTMENT
| (12) CPU P.C.Board | cee eee | 5 |
- CLK P.C.Board nh eee eee 6 :
| (3) SOU P.C.Board | ds eee eee ee | 6 | |
| (4) Video Monitor | £4 £4 424242 2 2 | heute eee | 7 |
| 6. WIRING AND CONNECTION | sv eevee | 8 |
- NAME OF EACH PART
- Body ee ee 9
- P.C.Board i eee ee 1
- Operation Panel Assembly —.. see eeeee 12
- PART LIST — \udaee eee ee 13
- P.C.Board should not be exposed direct to the sun. Direct sunshine is very harmful to LSI(memory element).
- P.C.Board to be stored or transported should be wrapped by a conductive pouch or aluminum foil, because LSI and IC used in the machine are semiconductor integrated circuits of which basic element is MOS-FET.
- When images on the Video Monitor screen are disturbed by powerful noise or other electrical causes, turn the main power off once and then on again.
SPECIFICATIONS
Power Consumption
Size
Weight
Number of Player
Number of Jumpman 118W
600(W) X 850(D) x 1700(H)mm.
100 Kgs.
1 or 2 person(s)
3 ~ 6 (Adjustable) Accessories Operation, Manual 1 copy
Key for Back Door : 2 pes.
Key for Coin Box Door : 2 pcs.
Fuse : 4 pes.
100~120V : SA x 1, 4A X 2,0.3A X 1
220~240V : 4A X 2, 3A X 1, 0.3A X 1
- INSTALLATION OF THE MACHINE
3-L Cautions on installation
- The power cord of the machine should not be connected to a wall outlet together with large load unit(s) such as motor, cooler,etc.
- Turn the power off before setting and removing the P.C. Board and connectors. Carefully handle them.
- Do not touch IC, LSI and other electronic parts on P.C. Board. Do not use a tester or the like on them. (They may be damaged by the inner voltage of the instruments. }
- When exchanging a fuse, use a new one of the prescribed capacity.
- The machine should be installed where it is not hot, keeping away from a heating appliance and direct sunshine.
- The machine should be installed where it is not wet and dusty.
- Do not touch the inside of the video monitor which has high ! tension units. Inform service station, if necessary.
3-2 Earthing of machine
- When the machine is installed in a wet place, it should be grounded to avoid accident by an electric shock.
- Connect an earthing wire to the earthing terminal of the machine.
- The opposite end of the earthing wire should be connected to an earthing bar which is firmly inserted i=] into the ground. —-
- Cautions
- Do not connect the earthing i wire to a water pipe, because a polyvinyl-choloride pipes are sometimes used in the water lines and, if so, the electronic continuity is cut at the points.
- Do not connect the earthing wire to the gas pipe absolutely. That is very dangerous.
- MAINTENANCE AND INSPECTION
4-1 Dismounting of front screen
Opening the back door, pull the front screen clamp which is mounted under the top plate. Pull the front sereen upward while pushing and then pull toward you.
Front Screen Clamp
4-2 Dismounting of operation panel Front Screen To dismount the operation panel for maintenance or inspection of the Control Unit or Micro Switch, open the front door and unfasten the fastener.
peration anel
Fastener
Front Door
S. POINTS AND METHODS OF ADJUSTMENT
5-1 CPU P.C.Board
The number of Jumpman, score level, the number of coin and type of machine can be set with the switches on CPU P.C.Board according to the diagram below.
TKG2-02-CPU TKG2-03-CPU
Number of Jumpman
Score Level for extra Jumpman. 7,000 points 10,000 points 15,000 points 20,000 points
Coinage
coin /1 coin /2 coin /3 coin /4 coins/1 coins/1 coins/1 coins/1
Table/Upright
Table Upright
5-2 CLK P.C. Board
Semi-fixed resistors, VR1 and VR2 on CLK P.C. Board are used to adjust video monitor screen.
TKG2-02-CLK TKG2-03-CLK
50KQ2 0.3W top type Turn right to move | VRI | white knob C) image downward. VR2 S0KQ_ 0.3W top type C) Turn right to move white knob image leftward
5-3 SOU P.C. Board
Semi-fixed resistor VR1 on SOU P.C. Board is used to adjust sound balance.
- aoe
vA VFO vRe
TKG2-03-SQU TKG2-04-SOU
| VRI | 10Ka 1/5 plain type Balance of effective sound white knob
5-4 VIDEO MONITOR
V-SIZE
V-HOLD
H-CENT
BRIGHT
SOUND VOLUME
Video Monitor Main P.C. Board
Fuse 0.3A
- WIRING AND CONNECTION
(9P CPU Harness Connector (na2-t0-zom) (1ax-20-291) pueog Did Nd ba
a1ge0 1814 40S désada i 3
| d OP Video Ha sd BF (can) [era pace
i AP : : “le i
ada dornp-to-z0u) (or3-to-2041) so1seuU0) BRUEH NOS ad WEN PROT Dg Od VL -dd
sorseuy99 ss0U6H 3-19 dO
7, NAME OF EACH PART
- Body
1-24 01-01-01
01-02-01 ~o-02
01-01-05 | 01-03 1 01-68 ~
01-30
09-01
on |. 01-01-02
- P.C. Board
07-00 TKG CPU P.C: Board P.C. Board Mounting Bracket 01-12 15-00 TKG SOU P.C. Board
TKG Video P.C. Board 06-00 TKG CLK P.C. Board 05-00
01-20 P.C. Board Spacer (Medium)
01-20 P.C. Board Spacer (Medium)
01-20 P.C. Board Spacer (Medium)
Removing P.C. Board Spacer
Press the claw with a pincette, as illustrated, and pull out the P.C. Board.
-a-
- Operation Panel Assembly
01-85
01-01-04
8 PARTS LIST
1.. Body
No. Name of Parts
TKGU-01-01-01
TKGU-01-01-02
TKGU-01-01-03
TKGU-01-01-04
TKGU-01-01-05 Body Transformer Base
Cash Box
Control Lever A’ssy Base Back Door
TKGU-01-02 Coin Selector TKGU-01-02-01 | Coin Switch TKGU-01-03 Back Door Lock TKGU-01-04 Front Door Lock TKGU-01-08 Power Cord
TKGU-O1-10 Strain Relief Bushing TKGU-O1-11 Game Counter TKGU-O1-12 P.C, Board Mounting Bracket TKGU-01-20 P.C. Board Spacer (Medium)
| TKGU-01-22 | Operation Panel | 1 | |
| TKGU-01-23 | Front Screen | 1 | |
| TKGU-01-24 | Name Plate | 1 | |
| TKGU-01-26 | P.C. Board Spacer (Small) | 10 | T |
| TKGU-01-28 | Front Door Ass’y | 1 | |
| TKGU-01-29 | Fluorescent Lamp A’ssy | 1 | |
| TKGU-01-30 | Caster | 2 | |
| TKGU-01-31 | Operation Panel A’ssy | 2 |
Fastener (A)
| TKGU-01-32 | Adhesive Tape | 1.9m | |
| TKGU-01-33 | Service Switch | 1 | T |
| TKGU-01-34 | Screen Filter | 1 | |
| TKGU-01-39 | Control Lever A’ssy | 1 |
Mounting Plate
| TKGU-0141 | Control Lever Knob | 1 |
| TKGU-01-43 | Speaker | 1 |
| TKGU-01-53 | Front Screen Frame (Lower) | 1 |
| TKGU-01-55 | Operation Panel A’ssy | 2 |
Fastener (B)
| TKGU-01-64 | Service Switch Bracket | 1 |
| TKGU-O1-65 | Strain Relief Bushing Plate | 1 |
| TKGU-01-67 | Blind Cardboard (Large) | 1 |
| TKGU-01-68 | Blind Cardboard (Small) | 1 |
| TKGU-01-70 | Control Knob Plate | I |
| No. | Name of Parts | Q’ty| | Remarks | |
| TKGU-05-00 | CLK P.C. Board | 1 | T (TKG2-03-CLK) (TKG2-02-CLK) | |
| TKGU-06-00 | Video P.C. Board | 1 | T (FKG2-02-VIDEO) | : |
| TKGU-07-00 | CPU P.C. Board | 1 | _T (TKG2-02-CPU) (TKG2-03-CPU) | | |
| TKGU-15-00 | SOU P.C. Board | 1 | T (TKG2-03-SOU) (TKG2-04-SOU) | |
| TKGU-08-00 | (PP-7A) Power P.C. Board | 1 | T |
TKGU-09-01-01 | (PT-8A) Power Transformer 1 TKGU-09-01-02 | 2P Table Tap 1 TKGU-09-01-03 | Terminal Block 1
| TKGU-10-01 | Power Switch A’ssy | 1 | |
| TKGU-13-01 | 10P CLK Harness Connector | 1 | T |
| TKGU-13-02 | 2P Counter Harness Connector | 1 | |
| TKGU-13-03 | 9P CPU Harness Connector | 1 | T |
| TKGU-13-04 | 3P Coin Harness Connector | 1 | |
| TKGU-13-05 | 5P Service Harness Connector | 1 | |
| TKGU-13-06 | 2P Speaker TV Harness | 1 |
Connector
| TKGU-13-07 | 4P-750 Audio Harness | 1 | : |
Connector 1
| TKGU-13-10 | 9P Main Switch Harness | 1 | | |
Connector |
| TKGU-13-11 | 17P Junction Harness | 1 |
Connector |
| TKGU-13-12 | 50P Flat Cable | 4/T | ||
| TKGU-13-13 | 8P Video Harness Connector | 1 | T | i |
| TKGU-13-14 | 7P SOU Harness Connector | 1| | T | |
| TKGU-13-17 | | 2P Speaker Harness | 1 | | |
Connector :
| TKGU-13-24 | 15P SOU Harness Connector | 1 | T | : |
TKGU-13-25 | 5P SOU Harness Connector 1|T
| TKGU-13-28 | 3P Junction Harness | 1! | ! |
Connector '
| TKGU-13-29 | 4P Main Switch Harness | 1 |
Connector ;
| TKGU-13-31 | 6P-1000 Video Harness | 1 | ! |
Connector |
| TKGU-13-32 | 2P Counter Junction Harness | 1 |
Connector
| TKGU-13-33 | 3P Coin Junction Harness | I |
Connector
| TKGU-20-00 | Video Monitor | 1 | (20-5F) |
| TKGU-23-10 | Micro Switch | 1 | |
| TKGU-23-12 | Switch Button Bracket | 4 | |
| TKGU-23-13 | Control Switch | 1 | T |
| TKGU-23-14 | Blind Plate | 1 | T |
| | Teme | Bearing Bracket | 1 | T |
| FOB J. apan
| No. | Name of Parts | Qty| | Remarks | per pe. |
| TKGU-23-17 | Switch Spacer | 4 | T | 7 |
| TKGU-23-19 | Shaft | 1 | T | . 7 |
| TKGU-23-20 | Spring Stopper | 1 | T | |
| TKGU-23-21 | Switch Collar | 1] | T | |
| TKGU-23-22 | Lever Spring | 1 | T | |
| TKGU-23-23 | E Ring 4 | 1| | T | |
| TKGU-23-26 | Nut Plate | 4 | ||
| TKGU-23-29 | Control Knob Collar | 1 | T | |
| TKGU-23-31 | Switch Button A’ssy (Blue) | 3 | ||
| TKGU-23-32 | Switch Button A’ssy (Orange) | 1 | ||
| TKGU-23-34 | Pal Nut | 4 | ||
| TKGU-23-50 | 4 Way Control Lever A’ssy | 1 | T | |
| TKGU-23-51 | 4 Way Guide Plate | 1/T |
T : Parts which is also used with the Table Model.
- CLK P.C. Board | FOB Japan
| No. | Name of Parts | Q’ty | Remarks | per pe. | ||
| TKG-05-00B| | CLK P.C. Board | 1 | Complete Set | . | ; |
| TKG-05-01 | Ic 10103 | 1 | Quadruple OR/NOR Gates | ||
| TKG-05-02 | 1C 10104 | 4 | Quadruple 2-Input AND Gates | ||
| TKG-05-03 | IC 10105 | 8 | Triple 2-3-2-Input OR/NOR Gates | ||
| TKG-05-04 | IC 10107 | 6 | Triple 2-Input Exclusive-OR/NOR Gates | ||
| TKG-05-05 | Ic 10109 | 1 | Dual 4-5-Input OR/NOR Gates | ||
| TKG-05-06 | IC 10116 | 1 | Triple Line Receivers | ||
| TKG-05-08 | IC 10124 | 6 | Quadruple TTL-to-ECL Translators | ||
| TKG-05-09 | IC 10125 | 6 | Quadruple ECL-to-TTL Translators | ||
| TKG-05-10 | IC 10131 | 2 | Dual Type-D Master-Slave Flip Flops | ||
| TKG-05-11 | IC 10133 | 4 | Quadruple Latches | ||
| TKG-05-12 | IC 10135 | 2 | Dual J-K Master-Slave Flip-Flop | ||
| TKG-05-13 | IC 10136 with radiator fin(L) | 7 | Universal Hexadecimal Counter | ||
| TKG-05-14 | Ic 10174 | 6 | Dual 4-to-1 Multiplexers | ||
| TKG-05-15 | IC SN74LS02 | 1 | Quadruple 2-Input Positive NOR Gate | ||
| TKG-05-16 | IC SN74LS04 | 1 | Hex Inverter | ||
| TKG-05-17 | IC SN74LS10 | 1 | Tri 3-Input NAND Gate | |||
| TKG-05-18 | IC SN74LS74 | 2 | Dual D-Type Edge-Triggered Flip-Flop |
W/Set and Reset
| TKG-05-19 | IC SN74LS86 | 2 | Quadruple 2-Input Exclusive OR Gate |
| TKG-05-20 | IC SN74LS161/163 | 2 | Synchronous Presettable 4-Bit Counter |
with Clear
| TKG-05-21 | IC SN74LS 164 | 6 | 8 Bit Serial-In Parallel-Out Shift Register |
| TKG-05-228] | IC MB7072 E/N | 4 | 256X4 Bit ECL RAM |
with radiator fin(S)
| TKG-05-23 | Electrolytic Capacitor | 2 | 100uF 16V | |
| TKG-05-24 | Ceramic Capacitor | 86 | 0.01nF 50V | |
| TKG-05-26B] | Ceramic Capacitor | 220pF 50V | ||
| TKG-05-27 | Ceramic Capacitor | 1OpF SOV | ||
| TKG-05-28 | Ceramic Capacitor | 33pF 50V | ||
| TKG-05-29B] | Resistor | 1 | 3302 %W+t 5% | |
| TKG-05-30B] | Resistor | 49 | 5102 %W + 5% | |
| TKG-05-32 8] | Resistor | IKQ | YW | 5% |
TKG-05-33 5} Resistor 2.2KQ 4W + 5%
] | FOB Japan
| [No. | Name of Parts | Q’ty |. Remarks | . | \per pc. |
| TKG-05-34B] | Resistor | 1 | 10K2 YW + 5% | |
| TKG-05-35 B] | Resistor | 2 | 1SKQ YW t 5% | |
| TKG-05-36B] | Resistor | 1 | 20KQ %W + 5% | |
| TKG-05-378| | Resistor | I | SIKQ YW + S% | |
| TKG-05-38 T Transistor | T 2 | 28C1215-R/S/T | ||
| TKG-05-39 | Choke Cu] | 1 | ST-501339 | ||
| TKG-05-40 | Toroidal Transformer | 1 | ST-501340 | |
| TKG-05-41 | Crystal Oscillator | 1 | ST-501338 | |
| TKG-05-42 | Resistor Array | 14 | EXB-P88-511J | |
| l'TKG-05-43 | IC SN74 LS123 | 2 | Dual Retriggerable Single shot | |
| TKG-05-44 | Polyester Film Capacitor | 1 | ECQMIH 0.001uF 102KZ | |
| TKG-05-45 | Polyester Film Capacitor | 1 | ECQMIH 0.022uF 223KZ | |
| TKG-05-46 | Polyester Film Capacitor | 1 | ECQMIH 0.1nF | 104KZ |
| TKG-05-47 | Resistor (Carbon) | 1 | 2002 YW + 5% | |
| TKG-05-48 | Resistor (Carbon) | 2 | 4.7KQ YW +t 5% | |
| TKG-05-49 | Resistor (Carbon) | 2 | 22KQ: 4W + 5% | |
| TKG-05-50 | Variable Resistor | 2 | EVL-V0A00-B54 50KQ 1/3W |
- Video P.C. Board
| No. | Name of Parts | Q’ty | Remarks | |
| TKG-06-00B! | Video P.C. Board | 1 | Complete Set |
| TKG-06-01 | IC SN74LS04 | 1 | Hex Inverter |
| TKG-06-02 | IC SN74LS08 | 1 | Quadruple 2-Input Positive AND Gate |
| TKG-06-03 | IC SN74LS20 | 2 | Dual 4-Input Positive NAND Gate |
| TKG-06-04 | IC SN74LS74 | 1 | Dual D-Type Edge-Triggered Flip-Flop |
W/Set and Reset
| TKG-06-05 | IC SN74LS86 | 2 |* Quadruple 2-Input Executive OR Gate | |
| TKG-06-06 | IC SN74LS139 | 1 | Dual 2-to 4-line Decoder/Demultiplexer |
| TKG-06-07 | IC SN74LS157 | 9 | Quadruple 2-line to 1-line Data Selector/ |
Multiplexer TKG-06-08 | IC SN74LS174 1 | Hex D-Type Flip-Flop W/Reset
| TKG-06-09 | IC SN74LS194 | 4 | 4-Bit Shift Register |
| TKG-06-10 | IC SN74LS245 | 2 | Octal 3 State Bus Transceivers | |
| TKG-06-11 | IC SN74LS273 | 2 | Octal D-FFS |
TKG-06-12 | IC SN74LS283 4 | 4 Bit Binary Full Adder
| TKG-06-13 | IC SN74LS367 | 2 | Hex Bus Driver W/3 State Output |
| TKG-06-14 | IC SN74LS373 | 1 | Octal 3-State D-latches |
| TKG-06-15 | IC SN74S02 | 1 | Quad 2 Input NOR Gate |
TKG-06-16 | IC SN74S86 1 | Quad 2 Input EX-OR Gate
| TKG-06-17 | IC SN74S157 | 1 | 2 to 1 Data Selectors |
| TKG-06-18 | IC SN748194 | 8 | 4-Bit Shift Register |
TKG-06-20 | IC 2114 2 | 1024X 4-Bit Static MOS RAM
| TKG-06-2! | IC 2148-6 | 2 | 1024X 4-Bit Static MOS RAM |
TKG-06-22 | IC 2716 (390ns) 4 | 2048X 8 Bit EP ROM
| TKG-06-23 | IC 2716 (450ns) | 2 | 2048X 8 Bit EP ROM |
| TKG-06-24B} | IC MB 7052 | 1 | 256X4 Bit Bipolar P-ROM |
| TKG-06-25 | Resistor | 7 | 1KQ. %W + 5% |
| TKG-06-26 | Electrolytic Capacitor | t | 100uF 16V |
| TKG-06-27 L Ceramic Capacitor | 33 | 0.1uF SOV | |
| TKG-06-28 | IC SN74LS10 | 1 | Tri 3 Input NAND Gate |
| TKG-06-29 | IC SN74LS85 | 2 | 4-Bit Magnitude Comparator |
| TKG-06-30 | IC SN74LS175 | 1 | Quadruple D-FFs |
| TKG-06-31 | IC SN74LS293 | 1 | Binary Counter |
| TKG-06-32 | IC SN74LS393 | 1 | Dual 4-Bit Binary Counters Gate |
| TKG-06-33 | IC SN74S 32 | 1 | Quadruple 2 Input OR |
| TKG-06-34 | IC SN74S 175 | 2 | Quadruple D-FFs |
- CPU P.C. Board [ FOB Japan
| No. | Name of Parts | Q'ty | Remarks | . | per pc. | | |
TKG-07-00B| CPU P.C. Board Complete Set 1024X4 Bit Static MOS RAM alo TKG-07-01 IC 2114
| TKG.07-04 | IC SN74LS00 | 1 | Quadruple 2-Input Positive NAND Gate |
| TKG-07-05 | IC SN74LS02 | 3 | Quadruple 2-Input Positive NOR Gate |
TKG-07-06 | IC SN74LS04 7 | Hex Inverter
| TKG-07-07 | IC SN74LS08 | 2 | Quadruple 2-Input Positive AND Gate | |
| TKG-07-08 | IC SN74LS32 | _| | 1 | Quadruple 2-Input Positive OR Gate |
| [xcoran | | IC SN74LS74 | 2 | Dual D-Type Edge-Triggered Flip-Flop | | |
. W/Set and Reset
| TKG-07-10 | IC SN74L8 123 | | | Dual Retriggerable Single Shot |
Quadruple 3 State Bus Buffers Quadruple 2 Input NAND Schmit Triggers, TKG-07-11 IC SN74LS125 TKG-07-12 IC SN74LS 132 TKG.07-13 IC SN74LS138 6 3-to 8-Line Decoder/Demultiplexer
| TKG-07-14 | IC SN74LS139 | 1 | Dual 2-to 4-Line Decoder/Demultiplexer |
| TKG-07-15 | IC SN74LS174 | 2 | Hex D-Type Flip-Flop W/Reset RAM |
| TKG.07-16 | IC SN74LS175 | 2 | Quadruple D-Type Flip-Flop W/Reset |
| TKG-07-17 | IC SN74LS240 | Octal Buffer/Line Driver/Line Receiver |
W/3-State Output TKG.07-18 | IC SN74LS245 Octal 3-State Bus Transceivers
| TKG0719 | | IC SN74LS259 | r | 2 | 8-Bit Addressable Latches | T |
| TKG-07-20 | IC SN74LS367 | 5 | Hex Bus Driver W/3 State Output | ||
| TKG.07-21 | IC MB7052 | 2 | Bipolar ROM 256X 4-Bit | ||
| TKG-07-22 | IC Z80A | 1 | 8-Bit Microprocessor | ||
| TKG-07-23 | IC 1 8257-5 | 1 | DMA Controller | ||
| | TKG-07-24 | IC 2532 | 4 | 4096X 8-Bit EP ROM | ||
| TKG-07-25 | Electrolytic Capacitor | 1 | luF | SOV | |
| TKG-07-26 | Electrolytic Capacitor | 1 | 47uF | 16V |
TKG-07-27 Electrolytic Capacitor __ 3 | 100uF 16V | TKG-07-28 | Ceramic Capacitor 3 | 0.01uF 50V
| TKG-07-29 | Ceramic Capacitor | 41 | O.1luF 50V | ||
| TKG-07-30 | Tantalum Capacitor | 15 | 10uF | 16V | |
| TKG-07-318] Resistor Array | 6 | 68 | YW2 5% | | | | | |
| TKG-07-32B] | Resistor Array | 3 | IKQ | YW | 5% |
| TKG-07-33B) | Resistor Array | 1 | 4.7KQ “Wt 5% |
FOB Japan
| No. | Name of Parts | Q’ty | Remarks | - | per pe. |
| TKG-07-355| | Resistor | 2 | 6802 | YW + 5% |
| TKG-07-36B] | Resistor | 1 | 3602 | YW + 5% |
| TKG-07-37B] | Resistor | 1 | 18K2 | YW + 5% |
| TKG-07-38B| | Resistor | 1 | 30KQ | YW + 5% |
| TKG-07-39 | Resistor | 6 | 682 | Y*W + 5% |
| TKG-07-40 | Resistor | 3 | 1002 | YW + 5% |
| TKG-07-41 | Resistor | 1 | 2002 | YW + 5% |
| TKG-07-42 | Resistor | 4 | 2202 | YW + 5% |
| TKG-07-43 | Resistor | 7 | 3302 | YW + 5% |
| TKG-07-44B| | Resistor | 8 | 4702 | YW + 5% |
| TKG-07-45 | Resistor | 8 | 1K | YAW + 5% |
| TKG-07-468) | Resistor | 1 | 2.2KQ | YW + 5% |
| TKG-07-47 | Resistor | 1 | 2KQ | YW + S% |
| TKG-07-48 | Resistor | 8 | 4.7KQ | YW t 5% |
| TKG-07-49 | Resistor | 1 | 75KQ2 | YW + 5% |
| TKG-07-50 | Resistor | 4 | 10KQ | YW +t 5% | |
| TKG-07-518] | Resistor | 1 | 68KQ | YW £ 5% |
| TKG-07-52 | Resistor | 2 | 33KQ | YW + 5% |
| TKG-07-53B| | Resistor | i | 75KQ. | UW t 5% |
| TKG-07-54 | Transistor | 1 | 2801384-R | |
| TKG-07-55 | Transistor | 2 | 28A564-Q/R | |
| TKG-07-56 | Transistor | 5 | 28C828-P/Q/R | ||
| TKG-07-57 | Diode | 1 | 181885 | ||
| TKG-07-58B3] | Diode | 5 | 181953 | |
| TKG-07-598| | Dip Switch | 1 | DCC-8P | |
| TKG-07-60 | Resistor (Carbon) | 1 | T5KQ | “Wt 5% |
| TKG-07-61 | Resistor (Carbon) | 1 | 9IKQ | YW 5% |
| TKG-07-62 | Resistor (Carbon) | 1 | 390K2 | YW 5% |
| TKG-07-63 | Resistor (Carbon) | 2 | S60KQ | “Wt 5% |
TKG-07-64 | IC SN74LS86 2 | Quadruple 2-Input EX-OR Gate
| TKG-07-65 | IC SN74LS164 | 1 | 8-Bit Shift Register | |
| TKG-07-66 | IC SN74LS373 | 2 | Octal 3-State D-Latches | |
| TKG-07-67 | IC CD4049 UB | 1 | Hex Buffer/Converter | |
| TKG-07-68 | IC CD4066B | 3 | Quadruple Bilateral Switch | |
| TKG-07-69 | Electrolytic Capacitor | 1 | 22uF 16V | |
| TKG-07-70 | Electrolytic Capacitor | 1 | 33uF 16V | |
| TKG-07-71 | Electrolytic Capacitor | 2 | 3.3uF 16V_ | No Polarity-Type |
| TKG-07-72 | Electrolytic Capacitor | I | 0.474F SOV No Polarity-Type |
5. Power P.C. Board Unit FOB Japan
| No. | Name of Parts | Q'ty |. Remarks | per pe. |
+—
| TKG-08-00 | Power P.C. Board | 1 | Complete Set |
| TKG-08-01t | Transistor | 4 | 28C2535 OR 28C2335 |
| TKG-08-02 | Transistor | 4 | 2S8A817 |
| TKG-08-03 | Transistor | 1 | 28A1015 |
| TKG-08-04 | Fast Recovery Center | 1 | 5GG2C41 |
Tap Diode
| TKG-08-05 | Shot Key Diode | 2 | 15FWJ2CL OR 30FWJ2C1 |
| TKG-08-06 | Silicon Rectifier Diode | 1 | 1B4B41 | |
| TKG-08-07 | Silicon Rectifier Diode | 1 | S4VB40 4A 400VW |
TKG-08-08 | Hybrid IC 2 | 3D-1000
| TKG -08-09 | 3 Terminals Regulators | 1 | 78M24 0.5A 24VW |
| TKG -08-10 | 3 Terminals Regulators | 1 | 7812 1A 12VW |
| TKG -08-11 | Thyristors | 1 | 5P4M |
| TKG-08-12 | Thyristors | 1 | 03P05M |
| TKG-08-13 | Diode | 4 | 181835 |
TKG-08-14 | Diode 9 | IS954
| TKG-08-15 | Diode | i | 181588 |
TKG-08-16 | Photo Coupler 1 | PS2002
| TKG-08-17 | Zener Diode | 4 | 1Z27 OR RD27FB |
| TKG-08-18 | Zener Diode | 2 | 05Z5.6V (05Z5.6L, RDS.6EB) |
| TKG-08-19 | Zener Diode | 1 | O5Z13V (O5Z15L) |
TKG-08-20 | Zener Diode 1 | 05Z27V (RD27EC OR RD30EB) TKG-08-21 | Ceramic Capacitor 3 | DEOQ707B471K2K 470pF 2KV
| TKG-08-22 | Ceramic Capacitor | 2 | DE0707B221K2K 220pF 2KV |
| TKG-08-23 | Film Capacitor | 7 | MDD2J473M 0.047uF 630VW |
| TKG-08-24 | Aluminium Electrolytic | 2 | 330nF 200VW 105°C |
Capacitor
| TKG-08-25 | Aluminium Electrolytic | 8 | 2200uF 10V |
Capacitor
| TKG-08-26 | Aluminium Electrolytic | 1 | 470uF 50V |
Capacitor
| TKG-08-27 | Aluminium Electrolytic | 1 | 470pF 25V |
Capacitor
| TKG-08-28 | Aluminium Electrolytic | 1 | 10u.F | 16V |
Capacitor
| TKG-08-29 | Aluminium Electrolytic | 13 | 47uF | 16V |
Capacitor
| TKG-08-30 | Aluminium Electrolytic | 1 | 47uF | 35V |
Capacitor
| TKG-08-31 | Aluminium Electrolytic | 5 | 10uF | 50V |
[_ Capacitor
FOB Japan
| No. | Name of Parts | Q’ty | Remarks | per pe. | |
| TKG-08-32 | Film Capacitor | 1 | 0.01uF | 50V |
| | TKG -08-33 | Film Capacitor | 2 | 1000pF | 50V |
| TKG -08-34 | Resistor (Coil Winding) | 1 | 222 | 5W + 10% |
| TKG-08-35 | Resistor (Carbon) | 3 | 1002 | YW 5% |
| TKG -08-36 | Resistor (Carbon) | 5 | 1KQ | YW t 5% |
| TKG -08-37 | Resistor (Carbon) | 10 | 512 | YW 5% |
| TKG-08-38 | Resistor (Metal Oxide) | 2 | 1KQ | 2W + 10% |
| TKG-08-39 | Resistor (Carbon) | 6 | 12a | WwWt 5% |
| TKG-08-40 | Resistor (Carbon) | 1 | 24KQ2 | %YWt5% |
| TKG-08-41 | Resistor (Cement) | 1 | 220 | 5W + 10% |
| TKG-08-42 | Resistor (Cement) | 1 | 2202 | 5W t 10% |
| TKG-08-43 | Variable Resistor | 2 | 100K2 | GFO6P |
| TKG-08-44 | Variable Resistor | 2 | 2kKa | GFO06P |
| TKG -08-45 | Shunt Resistor | 2 | S5MQ +£20% | ||
| TKG-08-46 | SC Coil | 1 | SC-02 | ||
| TKG'-08-47 | SF Coil | 2 | 100zH | 8A | |
| TKG-08-48 | SF Coil | 1 | 800zH | 2A | |
| TKG-08-49 | Auxiliary Power Transformer | 1 | E]-28 Type 3D-1000 | |
| TKG -08-50 | Oscillator Transformer | 4 | EE-16 Type 3D-1000 | |
| TKG -08-51 | Oscillator Transformer | 1 | EI-40 Type 3D-0077 | |
| TKG -08-52 | Oscillator Transformer | 1 | EC-35 Type 3D-0077 | |
| TKG -08-53 | Fuse Element | i | NR Type 4A |
- SOU P.C. Board [~ | FOB Japan
| No. | Name of Parts | Q'ty | Remarks | per pe. |
| TKG-15-00B] | SOU P.C. Board | 1 | Complete Set | - |
(TKG-15-00C)}
| TKG-15-01 | IC SN74LS04 | 1 | Hex Inverter |
| TKG-15-02 | IC SN74LS05 | 1 | Hex Inverter with Open Collector |
| TKG-15-03 | IC SN74LS164 | 3 | 8 Bit Serial-In Parallel-Out Shift Register |
| TKG-15-04 | IC MB3614 | 1 | Low Power Quadruple Operational |
Amplifiers
| TKG-15-05 | IC LM556 | 1 | Dual Timer |
| TKG-15-07 | IC SN74LS86 | 1 | Quadruple 2-Input Exclusive OR Gate |
| TKG-15-08 | IC SN74LS75 | 2 | Quadruple Bistable Latch |
| TKG-15-09 | IC SN74LS161 | 1 | Synchronous Presettable 4-Bit Binary |
Counter W/Direct Reset
| TKG-15-10 | IC SN74LS367 | 1 | Hex Bus Driver W/3 State Output | |
| TKG-15-12 | IC CD4049UB | 2 | Hex Buffer/Converter (Inverting) | |
| TKG-15-13 | IC DACO8CQ | 1 | 8-Bit Digital-to-Analog Converter | |
| TKG-15-15 | IC 2716 | 2 | EP-ROM | |
| TKG-15-16 | 1C MB8884 | 1 | 8-Bit Microprocessor | |
| TKG-15-18 | Crystal Oscillator | 1 | HC-18U-182 6.00MHz | ||
| TKG-15-26 | Transistor | 9 | 28C1815 | ||
| TKG-15-27 | Diode | 10 | ISS53 | |
| TKG-15-2983) | Ceramic Capacitor | 2 | 22pF | 50V |
| TKG-15-30 | Ceramic Capacitor | 2 | O.0luF | 25V | |
| TKG-15-31 | Ceramic Capacitor | 1 | 0.00lpF 25V | |
| TKG-15-32 | Ceramic Capacitor | 15 | 0.068uF 25V | |
| TKG-15-33 | Ceramic Capacitor | 1 | 0.022nF 25V | |
| TKG-15-34 | Electrolytic Capacitor | 2 | 220uF | 16V |
| TKG-15-35 | Electrolytic Capacitor | 7 | 1pF | 50V |
| TKG-15-36 | Electrolytic Capacitor | 1 | 3.3uF | 16V |
| TKG-15-37 | Electrolytic Capacitor | 1 | 4.74F | 16V |
| TKG-15-38 | Electrolytic Capacitor | 3 | 10nF | 16V |
| TKG-15-39 | Electrolytic Capacitor | 1 | 22nF | 16V |
| TKG-15-40 | Electrolytic Capacitor | 3 | 3.3nF | SOV | ||
| TKG-15-41 | Electrolytic Capacitor | 1 | 4.7uF | 50V |
| TKG-15-42 | Electrolytic Capacitor | 2 | 33uF | 16V | |
| TKG-15-43 | Polyester Film Capacitor | 1 | 0.033uF SOV | |
| TKG-15-44 | Polyester Film Capacitor | 2 | 0.047uF 50V |
FOB Japan
| | No. | Name of Parts | | oy Remarks | . per pe. |
TKG-15-47 | 24 Pin IC Socket 1
| TKG-15-48 | Resistor (Carbon) | 1 | 1202 | =%4Wt 5% | |
| TKG-15-49 | Resistor (Carbon) | 2 | 1508 | YW + 5% |
| TKG-15-50 | Resistor (Carbon) | 1 | 7502 | YW +t 5% |
| TKG-15-51 | Resistor (Carbon) | 12 | 1KQ | YW + 5% |
| TKG-15-52 | Resistor (Carbon) | 2 | 12KQ | 4Ws 5% | | | |
| TKG-15-53 | Resistor (Carbon) | 1 | 39KQ2 | “Ws 5% | ||
| TKG-15-55 | Resistor (Carbon) | 3 | 47KQ | “’Wt 5% |
| TKG-15-56 | Resistor (Carbon) | 2 | 5.1KQ | “Wt 5% |
| TKG-15-57 | Resistor (Carbon) | 5 | 5.6K2 | YW 5% |
| TKG-15-59 | Resistor (Carbon) | 16 | 10K2 | YW + 5% |
| TKG-15-60 | Resistor (Carbon) | 1 | 12KQ | “Wt 5% |
| TKG-15-62 | Resistor (Carbon) | 1 | 18kQ | YW + 5% |
| TKG-15-63 | Resistor (Carbon) | 1 | 20KQ | YW 5% |
| TKG-15-64 | Resistor (Carbon) | 2 | 27KQ. | YW + 5% |
| TKG-15-65 | Resistor (Carbon) | 2 | 43K, | YW + 5% |
| TKG-15-66 | Resistor (Carbon) | 8 | 47KQ. | YW + 5% |
| TKG-15-67 | Resistor (Carbon) | 3 | 100K2 “Wt 5% | |
| TKG-15-69 | Resistor (Carbon) | 2 | 2.0K2 | YW 5% |
| TKG-15-70 | Resistor (Carbon) | 3 | 3.3M2 YWt 5% | ||
| TKG-15-71 | IC SN74LS00 | 1 | Quadruple 2 Input NAND Gate |
TKG-15-72 | Transistor 1 | 28C2320 Rank F
| TKG-15-73 | Polyester Film Capacitor | 1 | 0.068nF SOV + 20% | |
| TKG-15-74 | Semi Fixed Resistor | _| | 1 | 10K2Q 1/5W |
| TKG-15-75 | Tantalum Capacitor | 1 | 22uF 16V | L_ |