CATHODE RAY TOMES

Soul Edge

Soul Edge Ver. II (Asia, SO4/VER.C) (Namco, 1996) · Document · 15 pages · 5 sections · original scan

Page 1

Operators Manual

IT IS THE RESPONSIBILITY OF THE OPERATOR TO MAINTAIN CUSTOMER SAFETY

AT ALL TIMES, AND IT IS IMPERATIVE THAT THE DETAILS SET OUT IN THIS MANUAL ARE FOLLOWED PRECISELY.

Part No. 90500084

Page 2

© 1995 all rights reserved.

Namco

No part of this publication may be reproduced by any mechanical, photographic or electronic process, or in the form of phonographic recording, nor may it be stored ina retrieval system, transmitted or otherwise copied for public or private use, without permission from NAMCO EUROPE LTD.

While the information contained in this manual is given in good faith and was accurate at the time of publication, NAMCO EUROPE LTD. reserve the right to make changes and alterations without notice.

This machine has been manufactured in accordance with European Community directives (1st. January 1996), and as such bears the marking. Any changes or modifications to this machine must be in accordance with European Community directives (1st. January 1996).

If you make any unauthorised changes to this product, you may contravene European Community directives (1st. January 1996)

Published by: NAMCO EUROPE LTD. Namco House, 8 Acton Park Estate, The Vale, London. W3 7QE

Phone:- 0208-324-6000 Fax:- 0208-324-6010

Page 3

SAFETY WARNING

In order to use this machine safely, be sure to read this Operators Manual carefully before installation, adjustment or use of this machine. Whenever the owner of this machine entrusts disassembly, installation, adjustment, routine maintenance or trouble shooting to another person, the owner should ensure that that person read the appropriate precautions and relevant sections of this manual before starting work. In order that no accidents occur when the machine is in operation, strictly follow the notes on safety described below. Also, carefully read section 2, “Precautions”

Warnings for Operation (C € Requirements)

NOTE: Only operate this machine after checking that it has been installed correctly and in accordance with the installation and commisioning manual.
NOTE: lf there is an error or problem with this machine, operation must be stopped immediately and the problem rectified before further use.

Warnings for Disassembly, Installation, Routine Maintenance, and Troubleshooting.

DANGER: Namco Ltd. bears absolutely no responsibility for accidents or injuries resulting from unauthorized changes to this machine.
DANGER: Ensure that the machine has been turned OFF before making adjustments or carrying out maintenance. Also ensure only qualified personnel carry out maintenance or turn the power ON to this machine.
DANGER: | The power supply and inside the monitor will remain hot and have areas of high voltage even though the machine has been turned OFF, and there is a possibility of burns or electric shock. Be careful not to touch these areas.
DANGER: In order to avoid injuries due to mis-operation, be sure that the voltage of the main power supply is within the prescribed limits. Also to prevent possible electric shocks due to failure, this machine MUST be fitted with a securely connected earthed plug.
NOTE: Do not turn the power switch ON until the machine has been installed correctly.
Page 4

Contents

Operators Manual 0.0.0... cece eeceseesenececeeceesseeeseesaeeeseesnesaeeeseevaeeeseeeatees 1

SAFETY WARNING. ccvsssssscisicecccsstsstiseeivesssceatsasicsavievensensinsetacetiesssecsveass 3

  • SPECIFICATIONS 0.00... cceeeeeeceee eee seeeseeeeteseeseeseseeseesaeeesnesaneaes 5
  • PRECAUTIONS 0000... cecceceeeeeeseeeeeeceeeceeeeesaeeesesaeeeseesaeseseeseeeaees 6

2-1 Cautions When Installing. «0.0.0... cece ese eeeecreneeeeecteneeeceeneeeeees 6 2-2 Cautions when Handling. ....... 2-3 Cautions when Transporting. .. we 2-4 Cautions when handling the PCB. ........ccccccscseseseeseesetstssseseseseseteeteteeseses 6

  • ADJUSTMENTS... eee cceceecceeceeeeeeseeseeeseeeesaseeseesaeeeseeseeeeeeee 7

3-1 Turning on the Power 3-2 Switches for Adjustment.. 3-4 Test Mode 3-4-1 Switch Test .. 3-4-2 Sound Test 3-4-3. Coin Options... 3-4-4 Game Options .... 3-4-5 Factory Settings.. 3-5 PC Board Connectors ixc.cececcevis cevceveasteesessecatvenvecacn se cureense vevanetesneeeesawnaneenss

  • PARTS oo. et ete eee ee tees ee teens se seee tases seseeeseteeeeaeee 13
  • SCHEMATIC j....cccccssssssrcevieesscrsseusstess sosnsersnsssssanviseesceabionstvaesi cesses 14
Page 5

1. SPECIFICATIONS

POWER SUPPLY :- 220/240volts AC

COIN ACCEPTOR:- Mars CashFlow - 1 Channel

MONITOR :- Hantarex 28" Polo Colour Monitor with auto degauss.

DIMENSIONS :- 790(w) x 1200(d) x 2080(h)

WEIGHT :- 175kg.

ACCESSORIES :- Keys: (Cash Door).. (Coin Door) (Back Door) ..

IEC Mains Lead ...........cccceceseseeteseeseees 1

Operators Manual .........:.ccccscesesesseeeee 1

Monitor Manual ............cccceseseesceeeseseeees 1

2P Attack Horizontal

1P Attack Vertical iP Start 2P Start 1P Attack Horizontal \ / \ 2P Attack Vertical )

Oo , QO 1P 8way Joystick

1P Kick Button \ 1P Guard Button ue a 2P Guard Button LO 2P Kick Button

2P 8way Joystick

Page 6
  • PRECAUTIONS

2-1 Cautions When Installing.

This game is designed for indoor use only. The game must not be installed outdoors or under the following conditions:-

a. In areas directly exposed to sunlight, high humidity, direct water contact, dust, high heat or extreme cold.

b. In locations that would present an obstacle in the case of an emergency, i.e. near fire equipment or emergency exits.

c. Onan unstable surface or subject to floor vibration.

2-2 Cautions when Handling.

a. AC power must always be turned OFF, and the game disconnected, before replacing any parts or connecting/disconnecting connectors.

b. When unplugging the game from an electrical outlet, always grasp the plug, not the mains lead.

c. The machine must be earthed with a securely connected earthed plug.

d. Care must be taken at all times to avoid electric shock when inspecting or adjusting the game.

2-3 Cautions when Transporting.

a. Do not subject the game to physical shock when transporting or moving it.

b. Always return the levellers to the UP position before moving the machine.

c. Take care not to rope any moulded (plastic) parts when transporting.

2-4 Cautions when handling the PCB.

a. Never test the PCB for continuity with a multimeter or similar device. The PCB contains sensitive devices which could be damaged or even destroyed by the internal voltage of such test equipment.

b. Foreign matter or dust on the PCB may cause failure. Turn off the power and clean the PCB with a dry soft brush.

c. When transporting the PCB ensure adequate packing protection to prevent damage.

Page 7
  • ADJUSTMENTS

3-1 Turning on the Power

After installing the machine, turn on the power. The power switch is located above the mains inlet on the rear of the cabinet.

3-2 Switches for Adjustment

Open the coin door to find the switches for adjustments, located on the service bracket.

  • Service Switch Press this switch to obtain game credits without incrementing the coin counter.
  • Test Switch Slide this switch "ON" to enter test mode. Test mode allows game testing and the changing of game settings. (See "3-4 Test Mode" on page 8)

There are two DIP switches located on the PCB. Switch 1 when set ON will enter the game into test mode. Always ensure this switch is set to OFF and use the test switch on the service bracket for testing the machine. Switch 2 when set ON will freeze the screen.

3-3 Volume Adjust

The volume control is located on the PCB. Turn the control to increase or decrease the volume.

SERVICE BRACKET PCB

COIN COUNTER

48W extended 56W edge connector edge connector (AMMA)

Volume /

Option Switeh

TEST SWITCH SERVICE SWITCH

Page 8

3-4 Test Mode

1.

3-4-1 Open the coin door for access to the service bracket, then slide the test switch "ON". The "Test Menu Screen" will appear on the monitor display.

Operating the 1 Player joystick up or down will step through the items.

Pressing the 1 Player Attack (H) Button will select an item.

Operating the 1 Player joystick up or down will change the settings.

Pressing the 1 Player Attack (H) Button will store the change.

Pressing the 1 Player Attack (V) Button will return the display to the Test Menu Screen.

The test switch must always be "OFF" during normal game mode.

SWITCH TEST SOUND TEST . COIN OPTIONS . GAME OPTIONS UARTS TEST... POLYGON TEST

RS-232C TEST .. CONVERGENCE TEST

Test Menu Screen

Switch Test . For testing switches For testing the sound For setting game pricing For setting of difficulty etc. Not Used For testing graphics Not Used For monitor set-up For monitor set-up . Not Used

On entering the switch Test, the following screen appears on the monitor.

Operating the joysticks wil positions.

When testing: 1P Attack (H) 1P 0000 wil 1P Attack (V) 1P 0000 wil 1P Kick 3P 0000 wil 1P Guard 3P 0000 wil 2P Attack (H) 2P 0000 wil 2P Attack (V) 2P 0000 wil 2P Kick 4P 0000 wil 2P Guard 4P 0000 wil change to 1P 1000 change to 1P 2000 change to 3P 1000 change to 3P 2000 change to 2P 1000 change to 2P 2000 change to 4P 1000 change to 4P 2000 cause the + to change to X for each of the eight

Pressing 1P Attack (V) will return to the Test Menu Screen

Page 9

(— 1P 0000 2P 0000 >

++ + ++ + +X + +X + ++ + +++

3P 0000 4P 0000

+ + + ++ + +X + +X + ++ + +++

SERVICE SWITCH + TEST SWITCH x DIP 1 + DIP 2 + COIN 1 + COIN 2 + COIN 3 + COIN 4 +

PRESS ATTACK (V) TO EXIT Ne m y,

3-4-2 Sound Test

On entering the Sound Test, the following display will appear on the monitor.

Pushing the 1 player joystick to the right will make the number step up and pushing the joystick to the left will make the number SONG 000 step down.

Each number will produce a different sound when the 1 player Punch 1 button is pressed.

Song 001 will produce a tone first on the left speaker, then on the right speaker and then on both speakers together.

Page 10

3-4-3. Coin Options

Note:- The price of play on this machine is set within the CashFlow coin mech. Ensure that the coin options on the screen are set as shown in the following table.

GAME OPTIONS

GAME COST ---------------------222--cennnneccnnfenneccennnnee (1) 1 COIN 1 CREDIT DISCOUNT TO CONTINUE NO COIN 1 MECH VALUE -~----------2--2--22-22-0-fonenneecnoe= (3) 1 COIN COUNT AS 1 COIN COIN 2 MECH VALUE -~-------------2--22-02-0-f-nennenoeeoe= (4) 1 COIN COUNT AS 1 COIN COIN 3 MECH VALUE -~----------2--2--22-22-0-f-neneeecneoe= (5) 1 COIN COUNT AS 1 COIN COIN 4 MECH VALUE -~-------------2--22-22-0-f-nenneocoeoe= (6) 1 COIN COUNT AS 1 COIN BONUS FOR QUANTITY BUY-IN ----------fp-----=----== (7) NONE CREDIT MODE ------------------22----2-222-00o-foreeceenneee (8) COMMON COIN COUNTER -----------------2----222222confonsccccnnneee (9) TYPE A: 1 COUNTER FREE PLAY NO

Coin Option Screen

3-4-4 Game Options

GAME OPTIONS

DIFFICULTY LEVEL : HARD ---------2------=---=---4 ---- (11) STAGE WIDTH : 18 M ---- (12) FIGHT COUNT(1P GAME) : 2- (13) FIGHT COUNT (2P GAME) : 2 (14) LIFE BAR (IP GAME) : 110% (15) LIFE BAR (2P GAME) : 125% - (16) GUARD DAMAGE : OFF (17) ROUND TIME : 40sec (18)

CHARACTER CHANGE AT CONTINUE : YES - CHARACTER CHANGE AT 2P GAME : YES- (19) (20)

MUSIC IN ATTRACT : YES - SPEAKER OUT : STEREO-- EVENT MODE : OFF-- HIT COLOUR : GREEN - (21) (22) (23) (24)

Game Option Screen

Page 11

3-4-5 Factory Settings

ITEM CONTENTS FACTORY SET

1|GAME COSTCOIN PULSES REQUIRED FOR CREDIT ----- settable 1 - 91
2|DISCOUNT50% DISCOUNT FOR CONTINUE ----- YES / NONO.
3|COIN 1 MECH VALUENUMBER OF PULSES ON METER ----- settable 1 - 91
4|COIN 2 MECH VALUENUMBER OF PULSES ON METER ----- settable 1 - 91

5&6 NOT USED

7|BONUS COINEXTRA COIN PULSE AT SPECIFIED COINS INNONE
8|CREDIT MODECOMMON (Credit common to player 1 & 2) / EACH ONE (Player | & 2 seperate)COMMON
9|COIN COUNTERTYPE A (1 Coin Counter) / TYPE B (2 Coin Counters)TYPE A
10|FREE PLAYYES / NONO.
11|DIFFICULTY LEVELEASY / MEDIUM / HARD / VERY HARD / ULTRA HARDHARD
12|STAGE WIDTHSETS THE SIZE OF COMBAT AREA18M
13|FIGHT COUNT (IP GAME)|Settable 1 - 42
14|FIGHT COUNT (2P GAME)|Settable 1 - 42
15_|LIFE BAR (1P GAME)95/110 / 125 / 140 / 160110
16|LIFE BAR (2P GAME)95/110 / 125/140 / 160125
17|GUARD DAMAGEOFF / ON (ON : A Character is damaged a little even when blocking)OFF
18|ROUND TIME20sec / 30sec / 40sec / 50sec / 60sec40sec
-CHARACTER CHANGE AT |v egYES
20CHARACTER CHANGE AT 2P vegNoYES
21|MUSIC IN ATTRACTYES / NOYES
22|SPEAKER OUTSTEREO / MONO.STEREO
23|EVENT MODEOFF / ON (Game is over per each 2P game)OFF
24|HIT COLOURGREEN / REDGREEN
Page 12

3-5 PC Board Connectors

JAMMA 56way Edge Connector 48w Extended Edge Connector

  • Do not make connections to blank positions.
  • Lockout / Coin Counter both operate on +12v.
  • The supply voltage must be within 5%. + +5V/2.5A minimum + +12v/2A minimum
Solder SideTerminal NoPart SideSolder SideTerminal NoPart Side
GNDA1GNDSpeaker R (-)AlB1Speaker R (+)
GNDB2GNDA2B2
+5vc3+5VA3B3
+5vD4+5vA4B4
E5Polarizing KeyASBSPolarizing Key
+12vF6+12vAGB6
Polarizing KeyH7{Polarizing KeyAZB7
Coin Counter 2j8|Coin Counter 12PGuard ButtonA8&Bs
K9|Coin LockoutAQBgGND
Speaker (-)L10 | Speaker (+)A10 | B10GND
Audio (GND)M11 | Audio (+)Ai1 | B11
Video GREENN12|Video REDAi2 | B12
Video SYNCP13|Video BLUEA13 | B13
Service SwitchR14|Video GNDA14 | B14
iS}15 | Test SwitchA15 | B15
Coin Switch 2T16 | Coin Switch 1A16 | B16
2P Start SwitchU17 | 1P Start SwitchA17 | B17
2P Lever UPVv18|1P Lever UPA18 | B18
2P Lever DOWNw1P Lever DOWNA19 | B19
2P Lever LEFTx1P Lever LEFT1P Guard ButtonA20 | B20
2P Lever RIGHTY1P Lever RIGHTA21 | B21
2P Attack - HZ22|1P Attack - HA22 | B22
2P Attack - Va23 | 1P Attack - VA23 | B23
2P Kickb24|1P KickA24 | B24

c 25 q oe Speaker Connections

GNDe27GND+Connect the (L) speaker to the speaker
GND728GNDoutput of the 56w JAMMA connector

Connect the (R) speaker to the Speaker R (+) & (-) of the 48w Extended connector

Page 13
  • PARTS

Decals & Plastics

DESCRIPTION PART No.

Cabinet Decal LHS - Upper 40000290

Cabinet Decal LHS - Lower 40000291

Cabinet Decal RHS - Upper 40000292

Cabinet Decal RHS - Lower 40000293

Cabinet Decal Front - LHS 40000294

Cabinet Decal Front - RHS 40000295

Cabinet Decal "NAMCO" LHS/RHS/Front 40000061

Character Plexi 30000225

Play Panel Overlay 33000120

Header Box Vac-Form 45000728

Top Flash Acrylic 30000226

Cabinet

DESCRIPTION PART No.

Monitor 28" Hantarex 84000026

Front Glass - Bronze 31000022

Interlock Switch 60000006

Interlock Switch Cover 39000028

M16 Adjustable Foot 88300079

Switch Mode Power Supply 83000002

Mains Filter 67000303

Speaker 445" 20w (with shield can) 62000006

Schaffner Mains In Assy 66000016

Schaffner Boot 66000017

Fuse Samp 20mm Slo-Blo 63500600

18" 15w Fluorescent Tube 64500009

Choke 240v 15w 63300000

Starter 63000000

Service Switch - SPNO 60000059

Test Switch - DPCO 60000023

3.5 - 6v Panel Meter 65000002

Joystick Sway Brent Fast Action Type 61000017

Push Button - Yellow 60200266

Push Button - Green 60200267

Push Button - Red 60200264

Push Button - Blue 60200263

Push Button - White 60200262

Page 14
  • SCHEMATIC

nai Als LAO

2h] VOLT HARE JH

Page 15

PiT Sy PLAYER 1 me 2

Dori

rH PigtH | ih!

ue omy

PP OHART i

PLAYER 2

mri iy

Eka