CATHODE RAY TOMES

Thief (GDI)

Thief (Pacific Novelty, 1981) · Manual · 42 pages · 4 sections · original scan

Page 1

OWNER'S MANUAL

Thief is manufactured and sold by GDI, Inc. under license of PNM, Inc. All rights reserved

©GDI, Inc. 5945 N. Rogers, Chicago, I11. 60646

Page 2
WARNING

This equipment :snerates, uses, and can radiate radio frequency energy and if not instelled and used in accordance with the instructions manual, may cause interference to radio communicat.ons. As temporarily permitted by regulation it has not been tested for compliance with the limits for Class A computing devices pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to correct the interference.

Page 3

CONTENTS

GENERAL

Hardware concepts Care of tape unit Care of player controls Coin mechanism

INSTALLATION

Cabinet levelers Sound adjustments Degaussing

OPERATING INSTRUCTIONS

Controls The characters Scoring

DIAGNOSTICS

Top left DIP switch Top right DIP switch Diagnostic tests General Burn-in test instructions Colbar (color bar display) Vidsel (video RAM select writes) Vidbit (video bit move) PSGTST (1/0 board driver test)

PARTS LIST

Control panel, lst player Control panel, 2nd player Service panel assembly Cabinet assembly CPU board 1/0 board Coprocessor board

Page 4

TABLE TOP ——________.

TV MONITOR

COIN DOOR COIN

INTERLOCK

AUDIO TAPE UNIT

POWER SUPPLY

FAN

I/O BOARD SPEAKERS

PROCESSOR

COPROCESSOR SERVICE

PANEL

COMPONENT LOCATIONS

Page 5

GENERAL

HARDWARE CONCEPTS

Thief is composed of three printed circuit boards:

  • Processor board » whose circuits include; a. Microprocessor b. Memories (RAM and ROM) ce. Control logic
  • Interface (1/0) board - whose circuits include; a. Sound synthesizers b. Switch input decoding c. Option DIP switches
  • Coprocessor board ~ which performs proprietary logic to increase performance of Z80 for graphics functions.

The processor board incorporates a Z80 central processor unit, the ROM for programming the game, and the game's display unit. Included is the hardware for generating the color display on the TV monitor. It's control logic permits the interface board to communicate with the microprocessor.

The interface board scans coin, start, joystick and other switch related inputs, and reports their status to the computer. The board also serves as the generator of synthesized sounds via it's two programmable sound generators (PSG) and amplifiers. This game uses a tape unit to supply it's special sound effects. It also controls the following functions:

  • Power to the tape unit (transistor switch)
  • Connect the left channel to speaker (relay contacts)
  • Connect right channel to speaker (relay contacts)

The tape unit is an automotive stereo type which contains an audio tape cassette. The interface unit controls the recorder, turning it on and off and "cueing" the individual tracks, as required.

CARE OF TAPE UNIT

A leaderless autoreverse cassette in the tape unit produces the audible chatter between cars as well as the sounds when they crash. When sound fails it may be due to a worn or bad cassette. Check by removing the game cassette from the tape unit and then inserting and playing a regular tape in it. If it plays, the game cassette is bad. If tape cassette replacement is all too frequent, be sure to check that the audio tape player is off during "game over". A replacement cassette may be ordered from GDI, Inc.

CARE OF PLAYER CONTROLS

The pushbutton parts used on the control panel of the game can be directly cross referenced to WICO replacements. The leaf switches are gold plated and may be cleaned by rubbing an ordinary piece of paper between the two surfaces. A point adjusting tool may be used to set the spacing. The joystick should be aligned so

-1l-

Page 6

that it is sensitive for deflection in all directions.

COIN MECHANISM

If the coin mechanism fails to accept coins after months of service, it generally requires cleaning.

Page 7

INSTALLATION

CABINET LEVELERS

The cabinet is shipped with levelers. Install and adjust them to;

A. Protect floors from scratches B. Keep the game steady

SOUND ADJUSTMENTS

The game incorporates four sound channels; Channels A, B, C and D, To make sound adjustments, start the game in the two player mode and then adjust channels A, B and C. To adjust channel D, it is easier to have a second party play the game while trimming the control on the tape unit. Adjust sound, as follows:

Channel A. Siren tone. Adjust trimmer pot at location 7D on the interface board (see figure on page 10). Channel B. Dollar pick-up sound. Adjust trimmer pot at location 7C on interface beard (see figure on page 10).

CHANNEL C, Police chatter. On tapé unit, Adjust volume of both channels C and D using the volume control. Balance channels C and D with the balance control. CHANNEL D. Car crash sounds. On tape unit. Adjust volume of both channels using volume control. Balance channels C and D with the balance control.

DEGAUSSING

This machine may require degaussing when installed in it’s proposed location, or moved to a new location. Degaussing is evident when color changes occur on the TV monitor as the cabinet is rotated from say, a north/south direction to an east/west orientation. The degaussing procedure is as follows:

  • Start degaussing on front (coin door) side of cabinet.
  • Next, do back side of cabinet.
  • Now, degauss TV monitor from a position above TV monitor.

4, Finally, continue degaussing from ir front of TV monitor while slowly moving degausser away from screen as far as possible.

  • Then, rotate degausser until it's field is perpendicular to TV monitor before turning it "off".

=3=

Page 8

CONTROLS OPERATING INSTRUCTIONS

The functions of the control panel, and associated operating controls, are as follows:

JOYSTICK

(e)

Coin door

Power Switch JOYSTICK - O C-» e) O De Ko b

Control Panel

Controls direction of Thief's car. Left directs Thief left, right directs Thief right, up - Thief moves up, and down, Thief moves down. Thief's car can move in only one direction at a time - and straight. Thief's car will stop if he bumps into anything - until his direction is changed by the joystick.

When pressed, game round is initialized for one player only. Game round continues until Thief's car is eliminated by crashing into a blue police car. Game then is initialized for another round with another allotted Thief car, etc. When all allotted Thief cars are eliminated, game ends. Player and score is displayed on the upper left side of TV monitor screen.

When pressed, game is initialized for two players. Game round is ended for first player when his Thief's car is eliminated, and then initialized for the second player. When second players Thief's car is eliminated, game round is initialized to point of interruption of first player, etc. Game rounds and levels continue until both players lose all their allotted Thief cars. Score of each player is separately displayed on top of TV monitor screen.

Accepts coins in either slot, and all coins accepted are displayed as credits on lower right-hand side of TV monitor screen to a total of 99 credits, Pressing 1 player button on control panel subtracts one eredit from total. Pressing 2 players button subtracts two credits from total. Additional coins must be inserted to play game when credits displayed total 00.

Facing coin door side of cabinet, switch is located underneath left side of cabinet. Conteols power to machine.

Page 9

THE CHARACTERS

THIEF

Se

Police cars

CRIME LEVELS

SCORING Thief's car is the main character, and the only car controlled by the phayer.! It's direction is under control of the joystick. The Thief's primary point scoring job during a round is to pick up all the green bills in the freme - although he can earnmany bonus points by picking up a dollar sign and then crashing into red police cars. The more red cars he gets, the higher the bonus points earned - to a maximum of four red cars.

The round starts with blue colored police cars chasing the Thief's car around the maze. They end the round by crashing into the Thief's car. Police cars become yulnerable when they are red (Thief has picked up a dollar sign) and are bonus point scoring opportunities for Thief until they turn blue again.

There are 16 crime levels. A player advances into the next crime level when he has successfully picked up all the green bills in a maze. Each level presents a new challenge as game difficulty increases.

Each gveen bill picked up 10 points

Red police cars lst car - 100 points 2nd car - 500 points 3rd car - 1000 points 4th car - 2000 points

Page 10

DIAGNOSTICS

TOP LEFT DIP SWITCH (See page 10)

SWITCH NUMBER GAME FUNCTION CONTROLLED 1} 2;,3[4] 5) 6 | 7| 8 OFF| OFF | 10,000 points per bonus car award ON | OFF 20,000 points per bonus car award OF F| ON 30,000 points per bonus car award ON [ON 40,000 points per bonus car award One bonus car award perspame Bonus car award at points intervals set by switches 1 & i Bonus car(s) awards implemented in game Bonus car(s) awards not implemented in game

  • OFF/OFF/OFF[ON [Burn-in test (lst 2 digits in checksum = socket #) ‘* ON [OFFJOFFION | Color bar display
  • OFF[ON |OFF|ON | Cross hatch grid ON [ON |OFF[ON | Continuous color map writes
  • OFF[OFF|ON [ON | Video RAM address select writes
  • ON [OFFJON [ON [1/0 board driver test
  • ON [ON JON [OFF | Display current options in effect *Close SLAM switch or interrupt power to machine for each test xSwitches 5, 6, 7 and 8 must be OFF in normal game mode

TOP RIGHT DIP SWITCH (See page 10)

SWITCH NUMBER | GAME FUNCTION CONTROLLED

25¢ per game 50¢ per game 25¢ plays two games 25¢ plays one game and 50¢ plays three games 3 cars per game 4 cars per game 2 = 5_cars per game 7 cars per game focktail table version of game Upright cabinet version of game

  • Either ON or OFF
Page 11

wee” DIAGNOSTIC TESTS

GENERAL

The ROM test set supplied allows for testing the electronics game package (processor, interface and coprocessor boards).

Game diagnostics are enabled when switch 8 of the top left DIP switch is ON.

Game DIP switches are generally read by the processor only at power-on. So, turn the game off and then on to signal a new switch setting.

Top Left DIP Switch (Page 10) SWITCH NUMBER DESCRIPTION OF TEST

Burn-in test (lst digits in checksum = socket # Color bar display Cross hatch grid Continuous color map writes Video RAM address select writes Video bit move I/O board driver test Reserved for future use

BURN-IN TEST INSTRUCTIONS

SCOPE. The burn-in test consists of the following (see Typical Display - next page):

  • A checksum to determine the condition of all ROMs in the system
  • A harness/control/IO board test sequence which displays the position of all switches in the system
  • A display of the individual switch positions of the two DIP switches on the I/O board
  • A 2114 RAM test - which tests the condition of the on-board RAM
  • A 4116 RAM test - which tests the display RAM
  • A coprocessor test - which tests sections of the coprocessor
Note that from time to time there may be a 4116 error message. Since the 4116 ICs are used in the video section, the game may still be very playable with a small fraction of errors.

Any error messages in the lower left side of the screen are caused by Coprocessor board problems. Errors such as "CNTXT ERR" or “ADDR XLAT ERR" are Coprocessor generated. If a large number of messages are received in the lower left hand side, either power is missing from the coprocessor or else the 50-pin flat cable is loose.

All errors other than 4116 are very serious and should be corrected immediately as they impair the earnings of the game.

Page 12

Typical Display

(Checksums ) (Controls)

00(ok)(Player 1)

02 (ok)

04(ok)eee ee~« This is Player 1 control panel

06 (ok) 08 (ok)

10(ok)(Player 2)

12 (ok) .

14(ok)eee et« This is Player 2 control panel

a (cocktail version)

: : : : « These are the DIP switches mh oo » 3 +. . Open circuit - - Closed circuit : : : : 2114 ERR ¢ Bad 2114 D4= (ok) see 4116 ERR © Bad 4116 F4= (ok) Sa 6

CAUTIONS

There are a number of dependences and limitations of this particular test ROM;

  • All tests depend on the existence of good RAM in the lowest 1K segment of memory
  • The tests used for the detection of errors and the 2114 and 4116 tests are very limited in their scope and ebtlity to trace down subtle problems in these areas

CHECKSUMS. The checksum test adds the number contents in ROM and generates a clrecksum number. The test ROM has a table of correct values and upon finding the correct value displays (ok). If the number is incorrect, it will display a four digit number (16 bit hexadecimal checksum found). Anything other than the (ok), check the manual for any changes which may have been made to that ROM since the production of the test ROM.

DIP SWITCHES. This diaplay is a visual presentation of each switch position on the DIP switches located on the 1/0 (small) board. This test is useful in determining the lowest level operation of the I/O panel.

PLAYER CONTROL DISPLAY. For problems in the harness and the adjustment of switches. This test indicates the opening and closing of switches on the;

  • Player 1 control panel
  • Player 2 control panel
  • Coin door
Page 13

The dots (+) represent the identical switches and their correct relative positions on the panel of the game. An exception to this rule is on the player 2 panel. There the positions used for the one and two player start have been replaced with the COIN door switches. The symbols (.) and (*) represent the OPEN and CLOSED positions of the switches on the front panel.

THEORY OF OPERATION. Imbedded in the base of the ROMO ROM is code which detects the existence of a ROMI14. If a ROM is found in this position, it checks for the proper contents at the beginning of the ROMI4. If they are correct, the system begins execution at beginning of ROM 14 + 6. «

COLBAR (Color Bar Display)

This routine generates a color bar pattern to test the operation of the video section, The test itself erases a byte to zero then writes to the selected plane of display memory.

This routine is especially useful for testing the wait line beck to the CPU as well as the timing of writes.

The following must be running for this test to operate:

  • CPU and select logic to RAM/ROM
  • CPU RAM

VIDSEL (Video RAM select writes)

In this test, each of the video RAM select lines are selected. Each video RAM is read and written to in sequence. This test is designed to check that the video section is actually connected to the CPU section.

This test is used to check for the existence of /MRD + /MWR + /WAIT, as well as the address lines leading to the video RAMs and the signals internal to the video circuit. Elch address line going to the video RAMs is exercised as well. In addition, the data written is incremented after each pass through the test.

The test will try to reset the video controller chip and then begin to read and write data to each of the address boundry location points 1, 2, 4,:!: last significant address. These are the only locations which will be written to.

Sync oscilloscope to the /OUT 0 select as this signals the start of a select sequence,

VIDBIT (Video bit move)

This routine generates a single bit write in each and every cell (byte) in the display memory. It is intended to detect bits stuck in individual planes.

In the normal operation of this routine, there are thirty two lines across the screen. On each pass the entire group moves to the side one single cell, Note that the test repeats after every eight writes because there are only eight bits to test per cell.

Page 14

Since the memory is arranged as eight bit bytes to the processor and the internal representation is as 4 bit pixels, problems may be isolated as to whether they are of a 4 or 8 bit error pattern, internal to video, or in the interface between the two.

This test requires that the CPU and 2114 RAM section be functioning, as well as selects to these sections.

PSGTST (1/0 board driver test)

This is a test of the programmable sound generator and output driver.

In the PSG test, each channel of the PSG is, in sequence, frequency modulated at full volume.

After all the PSGs have been tested, the relays and transistor drivers are sequenced in order:

1, All units off

  • Tape power on, talk track on and coin meter on
  • Explosion track relay on
  • Explosion track relay off, coin meter off and talking track relay off
  • Repeat

During the testing, the 6 PSG channels (3 channels per PSG) are being frequency modulated, This causes an audible "whoop, whoop, whoop" sound and a pause.

Ter RIGHT

J Tor AEPT DIP swiTeH

1/0 Panel, Control Locations

= ais

Page 15

PARTS LIST

Control Panel, 1gt Player, Parts List

DESCRIPTION

1D-20648 1 Control Panel

30D-20732 1 Control panel overlay

5 ~20667 Joy stick, four way Pps Sg

assembly connector, 03-06-1062

connector, 03-06-2152

5A~20552 Molex terminal, 02-06-2101

5A-20551 terminal, 02-06-1101

Page 16

Control Panel, 2nd Player, Parts List

PART NO. DESCRIPTION

1D-20648 Control panel

30D-20733 ®anel overlay

Joy stick, four way ee | | 1 Cable assembly a 5A-20552 6 Molex terminal, 02-06-2101

Page 17

’ Service Panel Assembly,’ Parts List

gry {| "DESCRIPTION PART NO, -

Service panel

20B-20658 Panel hinge 1B-20661 Speaker grill Speaker

Logic board assembly SRE SEE

24-20714 Spacer, PCB

1A-20715 PCB mounting bracket

14-20716 PCB mounting bracket 1A-20717 | PCB mounting bracket Rd_Hd Wood screw, #8 X 5/8

Rd Hd Wood screw, #6 X 1/2 NIPIN TS at

Rd Hd Machine screw, 6 - 32 X 5/16

20A-20729 2 Hex nut, nylon

20A-20730 8x} Circuit board support, Richo LCB53N 20A-20728 2 Studded support, SCB3-18N

Page 18

Cabinet Assembly, Parts-List

PART NO. Qty DESCRIPTION

11D- 20647 1 Cabinet

30D- 20654 1 Glass ~ Top

Filter - Monitor

n Bezel - 13" monitor 3D- 20642 1 | Cash box

D- 206651Control panel assembly
D-206661Control panel assembly, 1 - 2 play
20B-206501Hinge - Top

1B-20656 2 ] Glass retaining bracket

SA-20643113" monitor

11A-20653 4 «] Control panel mounting block

11C-206512Monitor mounting board
20- 20652,1Coin door.
1A- 20279| 1Interlock switch bracket©

5-20510 Interlock switch

14-20675 Vent grill S5A-6329 Toggle switch

14-20710 On/off switch plate

20-20673 Latch & retainer 20-20674 Hinge lock .

14-20711 Hinge lock bracket s (= fe] =]-[-[ le] [s|-

1A-20684 Courtesy outlet bracket 18 20661 Speaker grill 12V meter mounting bracket

14-20708 Top lock bracket

20A-20507 Toggle latch Carriage bolt, 8 - 32° X 1+1/4 Flat washer, #8

Hex nut, 8 - 32

Power supply SA-20264

5A- 20363

5A-20476

S5A-20731 ql Line filter

Varistor

Insulating tubing, 2" Line cord

Meter, 12V w/ bracket Tape player = 44.7

Page 19

Cabinet Assembly, Parts List (con't) PART NO, - [en DESCRIPTION

Carriage bolt, 1/2 - 20 X 1-1/2

Hex nut, 1/2 - 20

Split lock washer, 1/4"

Flat washer, 1/4"

Carriage bolt, 10-32 X 1-1/2

Split lockwasher, #10

Hex nut, 10 - 32

Rd Hd Wood screw, #8 X 5/8

Rd Hd Mach. screw, 8 - 32 X 1/2

Split lockwasher, #8

Wood screw, black oxide, Torx, #8 X 3/8 17 -20735 1

3B-20467 2

  • 4 | Rd Hd Mach, screw, 1/4 ¥ 20 X 3
3A-20690-18Twist loc - TL-250

5 Twist loc - TL-350 3A-2-690-2

3A-20690-32Twist lock - TL-450

1} Braided wire

Handle pull cover

16A-20719 Serial # tag pe Black PVC vinyl, 1/32" X 1/2", 8! SA-20262

20-20737 Service outlet

terminal

connector, 19-09-1099

connector, 19-09-1069

connector, 03-09-1033

5 -20355 connector, 03-09-2032

5 -20361 connector, 03-09-2062

connector, 03-09-1063

connector, 03-09-1023

5 -20353 connector, 03-09-2022

5A 204961Molex connector, 09-50-7101

5 ~20482 connector, 03-06-2092 = 157>

Page 20

Cabinet Assembly, Parts List (con't)

DESCRIPTION

connector, 03-06-1092

connector, 19-09-1029

connector, 03-06-1152

connector, 09-50-3091

connector, 09-50-3081

5 -20346 Molex connector, 09-50-3061

Molex connector, 09-50-3021

Molex connector, 03-09-1093

terminal, 02-09-1116 5A-20556

5A-2055711terminal, 02-09-2116
5A-2055364.terminal, 08-50-0115

5A-20552 9 Molex terminal, 02-06-2101

5A-20551,24terminal, 02-06-1101

Speaker

Page 21

CPU Board, Parts List .-. -

DESCRIPTION =

ICs

74SL00

7400

741.802 [741803 74LS0%

741806

74LS08

74LS10 nlelolole de fete

74LS32 T4LS42

74874 74LS86

74LS90

74109

74L8153

74LS157

74LS173

74L8174

74LS175

74LS189

74LS194 T4LS240

T4LS244

74LS275

211412 200ns access time or AM9114EPC

200ns_ access time, Intel type 4116-2 200ns cycle time or Mk4116, AM9016, MM5290

LM555 with 90 degree fold on leads

TMS-9927 or SMC 5037

Z80A_4mhz min or D780-1, Z80acpubl

Page 22

CPU Board, Parts List (con't)

Qiy DESCRIPTION

TRANSISTORS

4 2N3904 or 2N2222, ITT2222

CRYSTALS 8.00 Mhz, small case

20.0 Mhz, small case HIP mle

CAPACITORS 2 001 uf, monolythic ceramic 1 -01 uf, monolythic ceramic 102 +22 uf, monolythic ceramic 3 1 uf, axial lead electrolytic

3 100 uf, axial lead electrolytic

RESISTORS

100 ohm, 1/4 W, 5%

150 ohm, 1/4 W, 5% 330 ohm, 1/4 W, 5% 1k eh, 1/4 W, 5%

2.2K ohm, 1/4 W, 5% 100K ohm, 1/4 W, 5%

SOCKETS

16 pin, solder tail, low profile 18 pin, solder tail, low profile 24 pin, solder tail, low profile

40 pin, solder tail, low profile N we

CONNECTORS

6 pin post wafer, Molex 2391 series 09-65-1061

FLAT CABLE HEADERS

CPU Board, revision 2A or later

~ 18 - 50 pin male, straight header, Molex 10-56-3504.

PRINTED CIRCUIT BOARDS :

Page 23

I/O Board, Parts List - ~

\PART NO y “ DESCRIFTION

74Ls00

74LS04

74LS32

TALS42

1 74LS148 + TALS244 1 74LS245

1 8255-5 4Mhz version or AM8255A-5PC

AY3-8910 G.I.

LM380 linear

LM383T with 90 degree fold on leads

DIODES ,

1N4148 or 1N914

1N4004 it TRANSISTORS

2N3904 or 2N2222, 1172222 . +

CAPACI TORS

.001 uf, monolythic ceramic

el uf, monolythic ceramic

.22 uf, monolythic ceramic

1 uf, axial lead electrolytic

1 uf, tantalum dipped

4.7 uf, axial lead electrolytic

10 uf, axial lead electrolytic

100 uf, axial lead electrolytic

470 uf, axial lead electrolytic = 1000 uf, axial lead electrolytic BS Nintatr nl le|elalr alu

RESISTORS

2.7 ohm, 1/4 W, 5% 100 ohm, 1/4 W, 5% . 120 ohm, 1/4 W,. 5%

Page 24

1/0 Board, Parts List (con't)

DESCRIPTION

RESISTORS (con't) 150 ohm, 1/4 W, 5%

220 ohm, 1/4 W, 5%

1K ohm, 1/4 W, 5%

1.2K ohm, 1/4 W, 5%

2.2K ohm, 1/4 W, 5%

10K ohm, 1/4 W, 5% 47K ohm, 1/4 W, 5%

100K ohm, 1/4 W, 5%

1K resiator array of 15 resistors, pin 16 Conmon,

47K resistor array of 15 resistors, pin 16 common, Bourns 4110R-002-473,or 16-2-473, 916C473K2PE

10K trimpot, p.c. mount vertical, CTS X201R103-R1378115

SOCKETS

40-pin, solder tail, low profile

CONNECTORS

6 pin post wafer, Molex 2391 Series 09-65-1061

FLAT CABLE HEADERS

50 pin male, straight header, Molex 10-56-3504

8 a position dipswitch, single-pole-single throw

RELAYS

Single-pole, single-throw, 5 volt coil 1.1.T. MZ-SHG

Page 25

Coprocessor Board, Parts- List

DESCRIPTION

74LS00

74LS02

74LS08

74LS10

T4LS32

74L842

74LS139

74LS169A

74LS240

T4LS244

74L8245

74LS257A

74LS8283

74L8373

74LS374

748472

25810 or 748350

25LS2569 or 74LS569

2114L2 200ns access time or AM9114EPC

450ns access time, Intel type

CAPACITORS

22 uf, monolythic ceramic

470 uf, axial lead electrolytic

SOCKETS

18 pin, solder tail, low profile

20 pin, solder tail, low profile

solder tail, low ppofile

EONNECTORS

6 pin post wafer, Molex 2391 series 09-65-1061

Page 26

Coprocessor Board, Parts List (con't)

DESCRIPTION

FLAT CABLE HEADERS

50 pin male, straight header, Molex 10-56-3504

RINTED CIRCUIT BOARD 1 | Coprocessor Board

~22 -

Page 27

DIAGRAMS SECTION

Page 28

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 29

CPUI VIDEO PiPCLENS Ree maLSy

pws mse

ry

roe

fm

o7 lr van oe 7H: watt os vate os oe va joy eu waif 29 va, ot ae vay Bs ert) my VEbLOL CPULMEMORY Arnie Reed MUX be nie a

rue

FUP CIRCUIT DrNAMiC ADDRESS MUX

COLOR PLANE Secter ecarsr

GDliInc. 5945 WN. ROGERS AVE. CHICAGO, II 60646, 1392) 28 NAME Processor, Schematic Diagram (Sheet 1 of 4)

Page 30

ass

aman.

vast

WRITE ENABLE PER aad bad cru para READ

GDlInc. 5945 N. ROGERS AVE. CHICAGO, IL.60646/ 13121 286-6722 NAME Processor, Schematic Diagram (Sheet 2 of 4) |$__ reps.

wane

sl BACK 4aTew o rye 603 ea or nm > we sft+— ~ > [ts m4, alt cy

Vee. Verse. we aol ae 3] mvs}, “he os ms], Ai —[¢ or pulp 4, off weg__io al S—— ov

lisncae | [5 Hcas | ea ee tenia De ries ker up For Nerenowce wis Cea Power CABLE To REAL.) Vipto RAM

Page 31

a8 sion an

(G DI GDI Inc. 5945 N. ROGERS AVE. CHICAGO, IL.60646/ (312] 286-6722 NAME Processor, Schematic Diagram (Sheet °3 of 4)

Page 32

FROM Ps aug 108 2 » ne

Pes. ftom B3 (ees5)

ee

ee

GDI Inc 5945 N. ROGERS AVE, CHICAGO iG] NAME, 7 . ; rocessor, Schematic Diagram pretty

poretts

60646/ 13121 286-6722

(Sheet 4 of 4) a tee

“Vv

sv any Oita.

“A Prefs Guo { ApS eek ia Pre/E Pum 11h j aA been, erty sreaxce

mses

Pre/a ad eth | mK

sth srcanee met MreHT cue

ata

eH

oon

ow ow

pt ON ‘aNarar FRon e3 Cerys)

sity

Maar Sinn,

Page 33

PB0 WEB ARE apn TORND ONE PULL DOWN SITE OnLy

DIP SWITCH DIP SwiTeH 23 Pas mp res —

per _—

———— P83 —_—"

Pema —

Pas __ms cs pte a Pe pe? rey Wed B6 85. Surrey panied TCH an of

ow Sle pow Pct ; BA

7 re

? Avon Gann

PRPCONN

Acces ot

Way unecs

See Toye bans “Win eone Poe rorint ty

GDliInc. 5945 N. ROGERS AVE. CHICAGO, IL .60646/ (3121 286-6722 NAME I/O Schematic (Sheet 1 of 2)

Page 34

FALL ROMS ARE Thbabie O8 2710 bia 2.ciP S6LECt AME PAG Awe Tite

we GND

o o| a D oy o APROC 280A

zh A2 errr22

SPARC

cy

YY¥¥ RAM SELECT a TEL L____ nea ae pore av tt meee an hess

GDI Inc 5945 N. ROGERS AVE. CHICAGO, IL.60646/ [312] 286-6722

I/O Schematic (Sheet 2 of 2) NAME

3c

Page 35

ce

wees wa ccaark® C1 Twau C9 ae cae Daas my

(gil) mewn READ/wrire hoe <1

(6 BIT VIDEO MAP, SCREEN)

yp count eenaend

GDlInc. 5945 N. ROGERS AVE. CHICAGO, IL.60646/ 13121 266-6722 ME Coprocessor Schematic (Sheet 1 of 2) ‘Te tue

Page 36

muy

Bwreamenare Srenee ono dete 200 eee i. gnnee gon

Tener Rom fven

WI

  • Tht IT) ESET ERTS SETS

Ae

a ii Ses oniys gniannves 200 / Even Sececr

. ane HTH t4 4 lie

« s BS ° S s Py Ps < Q = ui z Pi = o ° z = 2; a o

Coprocessor Schematic (Sheet 2 of 2) NAME

Page 37

VE monan oreo Ou Wt OEE OD-pT-1P OR Recurr.E cP OE MOLD gh 0-11 De PemaLt ot Care cen aurea

  • Ack neue AC ame (ose 4 bramneton), pre twnmsarion, soe eyar%,

—— a = ee wer TI pu iia wae, Se aS Yd acme wt i Atm -—— tome loans

d ger fo o § Fur RLY CUY Qaus [tye peteteteted j RASH Gate east aren J I

roor a10|

ott ane SS

;' tet: suggeal [ --Feo never |
I|\|;il
\Tiiimal|!|i)
I1oot!‘uw
\14!til
ileet11;L----4]
Fo---J|ceiiaeLo setnmaranann (AV |

L-------4 L------J4

GDlInc. 5945 N. ROGERS AVE. CHICAGO. IL .60646 / [312] 286-6722

Coin Door Harness, Schematic Diagram NAME

Page 38

Re MASTER PANEL SOVSTICN AIASTER PANEL

r-74

& 7? 2>>—————._ up a Pai 3>————_ Leer Etsy 4 >. RIGHT 35> PLAYER 2 START é>———_ PLAYER ! START 7 -— SPARE g I--_—. sPare Maint war. a. HARNESS bee 9y——__ G20und 0 BLACK AUX, PAWEL JOYSTICK

en | coww |

GDlinc. 5945 N. ROGERS AVE. CHICAGO, IL .60646/ [312] 286-6722 NAME 7 Control Panels, Schematic Diagram

Page 39

Comm taney (Vy u

£m 200R reno —> 9

coud waren 9 Hy totum may 1 4 aay ~b fp ewe Wels epee pene anna acer Dearetertnad bh

\oS:© ste 10 are Corman aea ae)

To wa wine woe Bd awe (orAAMeY Wot owe CoS A Aidt pve ImpucatTiow, semvy 1eeee in ro a COLORS AS INDICAT OD,

sou9d@ wre waecen009 WA. remand Tene, sons Or etae
EYL oarfare7
(Wve@ oswa wae ra

1 ew tren emer 0 1 @ use reres came rosie @ eletvfjauys = | Gan enpet ents trace omer 8 1 © vow mores come rusmina Soe-se-oisslerysaseve =

aenr—>ewee© vin memes ota ok Meme TEAM. @ soeetosite
ttt one(save5)

were iT ®

REDet Meee orn4d auCerT. OHS-8

PS a | Sitar th) terse)

useVp843, acer, w 8t- 07-10

ic} rai oo 2 Tt Team ony) i ‘S Qua ic @ woe reves a eis ine cenree nontI® @ us oun re Lone CensTEe nomee Be KeTVA Houtine BOF: <— Aso ico fot

rotten noneSr maitalOusefed LOCKING 108 COVER Rewaine 6 Of + 19-300
imacnoan aT£.it) weeRO
WL snoune#3 Lo ye eedoue

Nr irl a Oe a)

GDI Inc. 5945 N. ROGERS AVE. CHICAGO, iL .60646/ 1312] 286-6722 NAME Harness Schematic (rgat door & panel, DC pwr &

Page 40

FSisitt bch denver

aecuarebart aTO\

a oo i

reer!

’ 1 endian “if

—_)’1
1 H 1Lok'
share amdous.1
iweurIwer1

w earn Asti Ti i ~@ \

‘wee (= i [72I0) AS INDICATED R SUPPL nena wo wi ON Pw Y teats 1¢ 9 fy tee pws puted une et ! a) od CHASES 4! ‘> Set ee |

BOARD AUTO*ASVORSING m CASBETTC BOCK +i unase amy T h —- wthv awirenes snow 1 ao sa ia ehoune ur oe cz oi Sot) ste ! warn ote aay | Center T Woo tee

Mreasch 4 (Quenr)

Cuan, "8” maa > i >

i weer teases t quer)

GDlIInc. 5945 N. ROGERS AVE. CHICAGO, IL.60646/ (312) 286-6722 Main Harness Schematic NAME © tna OUCTOR PONTE BUPMY Cond, He dwe Cormeutinw 10998), WTR, Beem CFT viwve JAcuer @ ure noves er AD STOR NATIONS aELePT. m1 @ wen br OOD SwreAwationa, ABcErT, o @ vse mores 2 pw ota accor, @ 1008 (acrenueres # @ use tee” av os Perey mousaree © use vor Q we 8 oY p90" peereN nec, ® PuLRy Wmewearen

Page 41

Commectun nomena: Porter teers apae 14+04-1064 SRS 087 PERN, (ewe chine prs

ens W182 04 WARS 09) Pena, Gouna chive pier OR

Rovay carne PENS BL FAN

1 [eno 2]r5v 2] Jove

  • eno HH s| +sv te a 3 +RVUNREE Heparin gia WW 6] Havanese DEIAG Tashated, Lape 7Lano Foe foe 1A Me Be so 5 OC £63, 6 Amys wn 3 [6nd Po Weed 4|Gno -5 voc £5%, 108. a|98V Sve i ers. 2|+5v frit me uvete, bid Dobe be we sano » Fam AC VEE Kime OS Ange ee Fate for V dngs B{-s¥ alrsv
  • +8v 4] ano éleny Le Jreu POWER SUFPLY

GDIInc. 5945 N. ROGERS AVE. CHICAGO, IL.60646/ [312] 286-6722 WAME Power Supply, Schematic Diagram

Page 42

WARRANTY

GDI warrants to the buyer that the following products will be free from defects in material and workmanship, under normal use and service, for a period of ninety (90) days from the date of shipment: (i) printed circuit boards (logic, audio, video, speech and power supply board) and parts thereon; (ii) television monitors.

The extent of this warranty applies and covers only electronic assemblies and does not include electro-mechanical components such as lamps, fuses, bulbs, switches, etc.

The sole liability of GDI under this warranty shali be, at its option, to repair, replace or credit buyer's account for such products returned to GDI during said warranty period, provided:

  • GDI is promptly notified upon discovery by buyer that said products are defective;
  • Said products are returned prepaid to GDI’s plant; and
  • GDI's examination of said products discloses to its satisfaction that such alleged defects existed and were not caused by accident, common misuse, common neglect, alteration, improper repair, installation or improper testing.

In no event shall GDI be liable for loss of profits, loss of use, incidental or consequential damage.

This warranty is in lieu of all other warranties, express or implied, including the implied warranty of merchantability and fitness for a particular purpose, and of all other obligations or liabilities on the part of GDI.