CATHODE RAY TOMES

Power-Drive UR 3 Player (0E86-00300-0000)

Power-Drive U.R. (Bally Midway MFG. CO.) · Manual · 68 pages · 29 sections · original scan

Page 1

POWER-DRIVE U.R.

3 PLAYER

Cally MIDWAY MFG. CO.

10601 W. Belmont it Avenue Franklin Park. finols 60131 y U.S.A.

Phone: (312) 451-9200 Cable Address: MIDCO Telex No.: 72-1596

OE68-00300-0000

Page 2

"WARNING

THIS GAME MUST BE GROUNDED. FAILURE TO DO SO MAY RESULT IN DESTRUCTION TO ELECTRONIC COMPONENTS.

WARNING: This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a CLASS A computing device pursuant to SUBPART J of PART 15 of FCCRULES, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the userat his own expense will be required to take whatever measures may be required to correct the interference.

ELECTRICAL BULLETIN: FOR ALL APPARATUS COVERED BY THE CANADIAN STANDARDS ASSOCIATION (CSA) STANDARD C22.2 NO. 1, WHICH EMPLOYS A SUPPLY CORD TERMINATED WITH A POLARIZED 2-PRONG ATTACHMENT PLUG.

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED)

PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

ATTENTION: POUR PREVENIR CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR. UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.

Cilly|MIDWAY

ouR TOLL FREE NUMBER FOR SERVICE INFORMATION CONCERNING THIS GAME, OR ANY OTHER BALLY/MIDWAY™ GAME YOU NOW HAVE ON LOCATION.

CALL US FOR PROMPT, COURTEOUS

ANSWERS TO YOUR PROBLEMS.

Video or Pinball - Continental U.S. 800-323-7182

C5idlly MIDWAY 10601 West Beimont Avenue Franklin Park, Illinois, 60131 phone (312) 451-9200

©COPYRIGHT MCMLXXXVI BY BALLY MIDWAY MFG. CO. ALL RIGHTS RESERVED.

NO PART OF THIS PUBLICATION MAY BE REPRODUCED BY ANY MECHANICAL, PHOTOGRAPHIC, OR ELECTRONIC PROCESS, OR IN THE FORM OF A PHONOGRAPHIC RECORDING, NOR MAY IT BE TRANSMITTED, OR OTHERWISECOPIED FOR PUBLIC OR PRIVATE USE, WITHOUT PERMISSION FROM THE PUBLISHER. THIS MANUAL IS FOR SERVICE USE ONLY, AND NOT FOR GENERAL DISTRIBUTION. FOR PERMISSION REQUESTS, WRITE: BALLY MIDWAY MFG. CO., 10601 W. BELMONT AVE., FRANKLIN PARK, IL 60131.

Printed in U.S.A.

Page 3

“GAME DESCRIPTION” IS NOT AVAILABLE AT THIS TIME.

Page 4

“GAME DESCRIPTION” IS NOT AVAILABLE AT THIS TIME.

Page 5

ute GENERAL INSTRUCTIONS we

FOR

POWER DRIVE - 3 PLAYER - UR.

INSTALLATION

1. 2. Remove keys from the taped coin return slot and unlock to open the coin box door, Remove four (4) “CABINET LEVELING LEGS" from inside the coin box. Tip the cabinet to the side and remove the shipping cleats from its bottom. Locate the threaded holes - one in each corner - and instali the “CABINET LEVELING LEGS" in them. Level the cabinet. When finished, the cabinet should be stable in the upright position. ° Unlock and remove the rear access door to gain access to the 3-pronged line cord. Reinstall the rear access door. Connect the 3-pronged line cord to a 3-slot A.C. wall outlet to insure proper ground- ‘ing. The power ON/OFF switch is located: UPRIGHT MODEL: On top to the right rear of the cabinet as you face the cabinet.

TO SERVICE THE CONTROL PANEL

Ll. UPRIGHT MODEL:

° Turn power to the game off. The control panel is held in place by two (2) latch clamps which provide constant pressure on the strikes. They can be reached through the coin door. To release the clamps, lift up and toward the center of the control panel. Once they are released, unhook them from their strikes. Swing out the control panel on it's hinge against the cabinet front for servicing. To resecure the control panel, reverse this procedure. ose bo

NOTE: To remove the control panel for bench-servicing only:

With the control panel in it's open position, disconnect it from it's cabling. Remove the screws which secure the continuous hinge to the cabinet. The control panel is now loose and may be bench serviced. To reinstall the control panel, reverse this procedure.

REMOVAL OF THE VIEWING GLASS

1. UPRIGHT MODEL:

NOTE: To accomplish this, the hinged control panel MUST swing open to rest” against the cabinet front. See the “TO SERVICE THE CONTROL PANEL-UPRIGHT MODEL" procedure.

° Turn power to the game off and swing open the hinged control panel. This frees the viewing glass so it can be removed.

1-3

Page 6

° By putting your fingers in the slot in the middle of the main-display- ~glass*® “oe support, the viewing glass can be removed as follows: , ”

  • Lift the glass up.
  • Swing the bottom edge of the glass out slightly forward.
  • Drop the glass down so that its' top edge is slightly below the bottom edge of the speaker grille.
  • Now, holding the glass by its’ top edge and bottom edge, lift up and out. ° To reinstall the viewing glass, reverse this procedure.

SPeRER(S) THE HEADER (ATTRACT) GLASS AND/OR THE FLUORESCENT LIGHT ASSEMBLY AND/OR THE SPEAKER(S

  • UPRIGHT MODEL:

° Turn the power to the game off.

Removal of the header (attract) glass: The glass is held in place by the speaker grille at the bottom and a retaining bracket at the top. The retaining bracket is secured to the cabinet top by five tamper-resistant screws. Remove these screws by using a special wrench provided in the Hardware and Bag Assembly. Remove the retaining bracket and slide up the header glass. This exposes the fluorescent light assembly. The fluorescent light tube may be replaced at this time.

  • WARNING: If you drop a fluorescent tube and it breaks, IT WILL IMPLODE! Use care in handling. To reinstall the header glass, reverse this procedure.

° Removal of the fluorescent light assembly (see picture on page 2-9): Be sure the power to the game has been turned off. Disconnect it from it's power cable. Remove the fluorescent light assembly's three mounting screws and then remove the assembly from the cabinet. To reinstall the fluorescent light assembly, reverse this procedure.

  • Removal of the speaker(s): Be sure the power to the game has been turned off. Remove the header glass and disconnect cabling from the speaker(s).

NOTE: To remove one or both speakers, it is NOT required to remove the speaker

grille. The grille is held to the cabinet with tamper-resistant screws. Each speaker is secured to the wooden speaker panel by two carriage bolts and two nuts. Remove the speaker(s) by removing the nuts and sliding the bolts out of the grille. To reinstall the speaker(s), reverse this procedure.

VOLUME CONTROL POT / OPTION SWITCH LOCATIONS

The volume control pot is located, along with the credit switch and the self-test switch, just inside the cabinet on the right side of the coin door frame. The option switch is located as shown in the attached Monoboard reference drawing. For adjustment, it can be reached through the game's rear access door.

To make the sounds louder, turn the volume pot clockwise as you face it.

To make the sounds less loud, turn the volume pot counterclockwise as you face it.

1-4

Page 7
  • SELF-TEST MODE The Self-Test mode is a special mode for checking the game switches and computer functions. It is the most complete way of checking for proper game operation and is quite easy to use.

The Self-Test mode may be entered at any time and from any mode of operation. Simply locate the black slide switch inside the Coin Box compartment and slide it to the Self-Test position. With this switch in the Self-Test postion, activate the slam switch located on the Coin Door. The game will enter the Self-Test mode immediately and display the following test menu. ...

  • INPUT TEST
  • OUTPUT TEST
  • DIPSWITCH OPTIONS
  • SELF-DIAGNOSTICS
  • GRID TEST

TO MOVE CURSOR UP, PRESS LEFT WHEEL BUTTON OF LEFT, MIDOLE, OR RIGHT SET. TO MOVE CURSOR DOWN, PRESS RIGHT WHEEL BUTTON OF LEFT, MIODLE, OR RIGHT SET. To EXECUTE TEST, PRESS ANY “WHEELIE” BUTTON.

This test is designed to confirm the operation of player input switches

  • INPUT TEST: When you enter the test, the screen displays the foland device switches in the game. lowing:

WHEELIE - OPEN WHEELIE SHIFT - OPEN = 2WD SHIFT = 2WD LEFT WHEEL - OPEN LEFT WHEEL RIGHT WHEEL ste eieee OPEN RIGHT WHEEL

WHEELIE « OPEN COIN CHUTE 1 . SHIFT . OPEN = 2WD COIN CHUTE 2 . LEFT WHEEL « OPEN COIN CHUTE 3 RIGHT WHEEL OPEN CREDIT BUTTON

When you activate any one of the above switches, its’ respective message “OPEN” changes to “CLOSED" except for SHIFT 1, SHIFT 2, or SHIFT 3. For any one of these three, when the shift lever is down, “OPEN = 2HD" appears on the screen (switch de-activated). The shift lever is now in 2 wheel drive. When the shift lever is up, "CLOSED = 4WD“ appears on the screen (switch activated). The shift lever is now in 4 wheel drive. To exit this test, activate the coin door slam switch.

  • OUTPUT TEST: This test is designed to confirm the operation of all 3 players‘ Wheel button lights will flash in sequence with the following messages displayed on the screen:

PLAYER 1... «++. LIGHT ON PLAYER 1... «+. LIGHT OFF

PLAYER 2 . LIGHT ON PLAYER 2 ... « LIGHT OFF

PLAYER 3 ..........-- LIGHT ON PLAYER 3 . +--+. LIGHT OFF

1-5

Page 8

SELr-tc>I muur, Lune U.

This cycle continues unless: A. You press any one of the ‘Wheel buttons to hold a light ON. B. You exit the test by activating the coin door slam switch.

  • DIPSWITCH OPTIONS: This test displays, on the screen, the current status of dip switch settings. To exit this test, activate the coin door slam switch.
  • SELF-DIAGNOSTIC TEST: For this test only, press any Wheel button to run diagnostics. If at the end of the run, the message “ALL TEST OK“ is displayed on the screen then the test is successful. If this message is not displayed, there exists a diagnostics problem. A test of the Sound Board interface is included in the run. To exit the test, activate the coin door slam switch.
  • GRID DISPLAY: This test was designed to display a crosshatch pattern used in adjusting the color monitor. This pattern may be used to adjust convergence, color balance, vertical linearity, and vertical/horizontal size. To exit this test, activate the coin door slam switch.
NOTE: One Sound Test available with this game is when activating any of the Wheel buttons (e.g. when moving the cursor along the test menu) and when activating the coin door slam switch.
IMPORTANT NOTE: There is NO-battery back up provided for this game. All logic & memory functions will be retained thru dip switch settings.

1-6

Page 9

POWER DRIVE U.R.

OPTION SWITCH SETTINGS

LITITTITTT TTT TATA T SMLTCH NO. 2 - AT AL3 - LOCATED ON MONOBOARD ///////////// 1/1/11 111

SWH1 SW#2 SW#3 SW#4 SWHS SWH6 SW#7 SW#8 SW#9 SW#10 NOT) = (NOT NOT USED USED USED

COIN SETTINGS: IT OFF OFF 2 COINS / 1 CREDIT OX OFF 1 COIN / 2 CREDITS OFF ON 1 COIN / 1 CREDIT ON ON

DIFFICULTY LEVEL SETTINGS:

EASY LEVEL 1 ON OFF HARD LEVEL 3 OFF ON HARDEST LEVEL 4 ON ON

ATTRACT SEQUENCE SOUNDS: -

NO SOUNDS ON

NEW GAME RACK NUMBER: 1ST RACK ALWAYS RESETS TO RACK 1 IST RACK STARTS WHERE LAST ON GAME ENDED

NIDEO FREEZE MOD: NORMAL VIDEC OFF FREEZE VIDEO ON

FACTORY SETTING - ALL LOGIC SWITCHES SET IN THE “OFF“ POSITION | PART NO. MO51-00£36-A007

1-7

Page 10

PC. BOARD REFERENCE ORAWING

FOR MONOROARD SYSTEM

{Jos

[

I MONOROARD A084-91787-AE6R

OPTION SWITCH "2" (10-PASI TION) J2

ON

OFF

Page 11

INTRODUCTION

This manual offers generalized troubleshooting procedures for common types of malfunctions which can be applied to most video games. We will not attempt to give you specific instructions for troubleshooting particular games because this would involve hundreds of pages of more repetitive instructions, differing only in the specific details of each game.

The most common problems occur in harness components such as the coin acceptor, player controls, interconnecting wiring, etc. These areas are covered in moderate detail.

The TV Monitor and Game Logic Printed Circuit Boards (PCB's) provide their fair share of problems too, but not to the extent of the harness and its component parts.

As you already know, the Game Logic PC Boards are complex devices. fach contains a great number of different interrelated circuits. The major changes which give each game its own particular individuality are accomplished in the EPROMS and other Integrated Circuit devices that are installed on each of these PC Boards.

GENERAL TROUBLE SHOOTING SUGGESTIONS

The first step in troubleshooting is to correctly identify the malfunctions symptoms. This includes not only the circuits or features malfunctioning, but also those still operational. A carefully trained eye will pick up other clues to what's wrong as well. For instance, a game in which the computer functions fail completely just after money was collected may have a quarter shorting the PCB traces. Often an experienced troubleshooter will be able to spot the cause of a problem even before opening the cabinet.

After all the clues are carefully considered, the possible malfunctioning areas can be narrowed down to one or two good suspects. Those areas can be examined by a process of elimination until the cause of the malfunction is discovered.

HARNESS COMPONENT TROUBLESHOOTING - 4

Typical problems falling in this category are coin and credit problems, power problems, and failure of individual features.

NO GAME CREDIT - - For example, a prospective game player inserts a quarter or token and is not awarded a game. The first thing to check is whether or not the quarter or token is returned. If it was returned, the malfunction most certainly lies in the coin acceptor itself. First, use a set of test coins (both old and new) to ascertain that the player's coin is not undersize or underweight. If your test coins are also returned, coin acceptor servicing is indicated. Generally, the cause of this particular problem is a maladjusted magnet gate. Normally, this will mean slightly closing the magnet gate by turning the adjusting screw out a bit.

1-9

Page 12

If the quarter or token is not returned and there is no game credit, the cause of the fal- .” function may be in one of several areas. First, try operating the coin return button; if the coin is returned, the problem is most likely in the magnet gate. Enlarge the gap according the coin acceptor manufacturers service procedures. If this does not cure the problem, remove the coin acceptor, clean it, and perform the manufacturers suggested major adjustment procedure.

If the trapped coin is not returned when the wiper lever is actuated, you may have an acceptor jammed by a slug, gummed up with beer, a jammed coin chute, or mechanical failure of the acceptor mechanism. In this case, first check for the slug that will generally be trapped against the magnet. If a slug is found, simply remove it and test the acceptor. If the chute is blocked, remove the acceptor and remove the jammed coins. If there is actual failure of the acceptor, remove the unit and repair as indicated by the acceptor manufacturers service procedures.

If the coin is making its way through the acceptor (that is, falling into the coin box), yet there is still no game credit, you either have a mechanical failure of the coin switch or electrical failure of the coin and credit circuits. The first place to begin is by checking the coin switch. Most of these switches are the make/break variety of micro switch. They are checked for continuity between the “NO", “NC, and “C" terminals. When not actuated, the “NC“ and “C" terminals should be continuous and the "NO" terminal open. When actuated, the “NO" and “C" terminals should be continuous and the “NC“ terminal open. If the coin switch checks good, inspect the solder connections to the coin switch terminals to be sure there is good contact at this point. If necessary, use a continuity tester and check from the terminal lug on the switch to the associated PCB trace. This will tell you if there is a continuous line all the way to the credit circuit.

If the coin switch wires do check good, the problem is in one of the game logic boards - most likely in the coin and credit circuitry.

Tf you do get a game credit when a coin is deposited, but the game will not start when the one or two player start button is pressed, there may be a problem in the start switch, the interconnecting wiring, or the game logic boards. First, check the switch. If the switch is OK, proceed to check the wiring. Again, make sure you go from the terminal lug on the switch to the PCB trace. This way, you will check the terminal contact as well as the PCB edge connecter contact. If the wiring is continuous, preceed to check the PCB credit circuit. If not, check each section of the wiring, until the discontinuity is located. If the wiring is OK, the problem must lie in the games logic boards.

TRANSFORMER AND LINE VOLTAGE PROBLEMS

Your game MUST have the correct line voltage to operate properly. If the line voltage drops too low, one of the games logic circuits will disable the credit acceptance circuit. The point at which the games logic circuits will fail to function is approximately 105 volts AC.

Low line voltage may have many causes. Line voltage normally fluctuates a Certain amount during the day as the total usage varies. Peak usage times occur mainly at dawn and/or dusk. So if your games problem seems to be related to the time of day, this may be a factor. A large load connected to the same line as the game (such as a large air conditioner or other device with an exceptionally large electric motor) may drop the line voltage significantly when starting up. This drop can result in an intermittent credit problem. In addition, poor connections in the location wiring, plug, or line cord may also cause a significant drop in power. Cold solder joints in the games harness, especially in areas like the transformer connections, interlock switch, or fuse block, may also produce the same results, although probably on a more permanent basis.

1-10

Page 13

Sométimes location owners (especially in bars) replace light switches with dimmer rheostats, and the game is sometimes on the same line. Obviously, the voltage available to the game is going to drop dramatically when the dimmer is turned down.

In any case, the way to check for proper line voltage is with your VOM. Set the VOM to the 250 VAC scale and stick the probes into the wall outlet the game was connected to. If it's OK here, check the transformer primary connections. If you do not get 117 VAC, examine the solder joints on the transformer, fuse block, and interlock switch. If you do get 117 VAC, the problem must be either in the transformer, harness connections, or in the PCB power supply-

If you suspect the transformer, check its secondaries with the VOM set to the 50 VAC scale and correlate the readings with the legend on the side of the transformer. The transformer must also be correctly grounded, so check the ground potential as well, especially if there is a hum bar rolling up or down the Monitor screen. _——

NO POWER, NO PICTURE - - If the Monitor screen is completely dark, first look in back of the Monitor to see if the CRT filament is glowing. If it is, try adjusting the brightness control. If no luck here, put your ear near the Monitor and listen for the high-pitched B+ hum produced by the flyback transformer. If you get the hum but no picture, and you have tried adjusting the brightness, major Monitor servicing is indicated.

If the monitor seems completely dead, check the rest of the game to see if it has power. If it doesn't, go directly to the wall outlet and check there. If OK there, check the game fuse(s), interlock switch, and interconnecting wire lengths.

Sometimes it is difficult to tell if a slow-blow fuse has blown. If in doubt, check it using any of the VOM “R" scales.

HARNESS PROBLEMS - - Other harness problems include blowing fuses and malfunctioning controls. The repeating blown-fuse problem can sometimes be quite exasperating to solve. Short circuits have the tendency to occur in areas almost impossible to find. First, try inserting a new fuse as old fuses age and sometimes blow without cause. If the new fuse also blows, you definitely have a short.

The best way to approach this problem is by disconnecting devices that may be causing the problem, such as the TV Monitor, the various PCB's one at a time, and the isolation transformer. Disconnect the devices by FIRST turning the game off, disconnecting it from its wall outlet. Remove the blown fuse and connect your VOM across the terminals of the fuse block (this will save blowing a fuse each time you want to check the circuit). Set your VOM to one of its resistance scales. You should be reading a short. If not you probubly have a part that only shorts out after it is heated up - we'll cover this in a minute. So, assuming you are reading a short on your VOM, disconnect the components from their cabling one at a time, checking the VOM after each one is disconnected. When the short disappears, you have just disconnected the bad component. If all components are disconnected and the short still remains, the problem is in the harness and only patient exploration will reveal its location. Carefully examine all the wiring, looking for terminals that may be touching, metal objects such as coins shorting the connections, or burned insulation. If necessary, use the VOM to check each suspected wire.

Page 14

OK, now lets assume that you connected your VOM across the fuse block terminals as stated above and you did not read a short. This most likely means that you have a component somewhere in that game that ONLY goes bad AFTER it heats up. It checks good when its cold. In this case, turn the game off and disconnect ALL of its components. Install a known good fuse in the fuse block. And turn the game on. If the fuse does not blow after a few minutes, you know that it is not anything to do with the wire harness. (In this instance, it shouldn't be, actually. But it never hurts to check.) Next, turn the game off again and reconnect ONE component. Turn the game back on and wait a few minutes to see if the fuse blows. If it does not, turn the game off again and reconnect another single component.

Turn the game back on and wait a few minutes to see if the fuse blows. Repeat this procedure until the fuse blows. When it does blow, the last component you connected has the part on it that is going bad after it warms up and is shorting out.

MALFUNCTIONING CONTROLS - - The most common problem here is the bad potentiometer (pot). Typically, a bad pot will cause the image on the screen to jump when it reaches a certain point. The only cure for this one is to install a new pot.

If a feature that is operated by a switch (for example, joysticks, foot pedals, control panel buttons) does not operate at all, check the switch with a VOM or continuity tester to verify its operation. If the switch does not check good, replace it. If the switch is OK, you should suspect the input to the switch from the PCB. In this case, get out the harness and logic schematics and check to see what kind of input is supposed to be at this switch. In many cases, the input will be +5 volts DC. If so, use the VOM to check its presence with the game turned on. Normally, the switch is used to pull a +5 volt DC line LOW to GROUND or to pull a LOM line HIGH. If the PCB output is missing, check the wire length from the PCB. If you find the signal at the PCB trace, the wire length or connection is at fault. If there is no signal at the PCB trace, begin exploring the PCB using the logic schematics and game manual.

Page 15

SECTION 2

{LLUSTRATED PARTS BREAKDOWN

Page 16

POWER-DRIVE U.R. — 3 PLAYER — FRONT

Page 17

POWER-DRIVE U.R. - 3 PLAYER - FRONT PARTS LIST

ORDER BY PART NUMBER ONLY

ITEM PART NO. DESCRIPTION

0£68-00900-00XF HEADER GLASS: SCREENED

A595-00011-0000 HEADER FLUORESCENT LIGHT ASSY. (NOT SHOWN)

0574 -00903-0700 HEADER RETAINING BRKT. (2 REQ'D.)

0017 -00101-0138 #8 X 10 TORX TAMPER PROOF SCREW (11 REQ'D.)

(FOR ABOVE SCREW) TAMPER RESISTANT 0017-00009-0522 | LONG ARM KEY:

0E36-00102-O0XF {BLACK SPEAKER GRILLE

0017 -00003-0570 5-1/4" SPEAKER - 4 OHM, 15W (2 REQ'D.) (NOT SHOWN)

0017 -00042-0314 BEZEL: 19" INJECTION MOLDED

0£68-00901-00XF MAIN VIEWING GLASS

0017-00003-0465 WELLS-GARDNER - 19" COLOR DUAL SYNCH HORIZONTAL MTG. MONITOR

AE68-00004-0000 CONTROL SHELF ASSY.: (INCLUDES ITEMS 8 THRU 18)

0£ 68-00501-0000 CONTROL SHELF: WOOD

AB96-00012-0000 BALL KNOB & HANDLE ASSY. (3 REQ'D.)

0896-00901-0000 BALL KNOB: BLACK, ROUND (3 REQ'D.)

AB96-000 16-0000 2-WAY SPEED SHIFT (3 REQ'D.)

AE36-00010-00XF CONTROL - APRON WELD ASSY.

0£68-00902-00XF OVERLAY

0017-00032-0093 PUSHBUTTON SWITCH W/HOLDER, WHITE (3 REQ'D.) (NOT SHOWN)

14 0017-00042-0300 BUTTON: PUSH: ROUND: WHITE (3 REQ‘'D.) (NOT SHOWN)

0017-00032-0108 PUSHBUTTON: ILLUMINATED, WHITE (6 REQ'D)

BUTTON: PUSH, ROUND, YELLOW 6 0017-00042-0301

17 0017-00042-0302 BUTTON: PUSH, ROUND, BLUE

18 0017-00042-0304 BUTTON: PUSH, ROUND, RED

NOT PART OF ABOVE ASSEMBLY & MUST BE ORDERED SEPARATELY Lt

2-3

Page 18

POHER-DRIVE U.R. - 3 PLAYER - FRONT PARTS LIST (CONT'D.)

ORDER BY PART NUMBER ONLY

ITEM PART NO. DESCRIPTION

19 0017-00103-0054 5/8 X 11 PAL NUT (3 REQ'D.) (NOT SHOWN)

  • 0G17-00009-0534 |BASSICK CLAMP (2 REQ'D.) (NOT SHOWN)
  • 0555-00901-0000 |PIN: LOCATING (MOLDED) (8 REQ'D.) (NOT SHOWN) Ltt

20 0090-00002-04BK |COIN DOOR FRAME: LARGE BLACK DOUBLE

2i A982-00015-0000 |U.S.A. 25¢ COIN DOOR & CABLE ASSY.

22 0017-00009-0477 }CASH BOX: MOLDED (NOT SHOWN)

23 0950-00009-0477 |COVER: COIN BOX: {NOT SHOWN)

24 0950-00112-0000 |BASKET: COIN BOX - WIRE (NOT SHOWN) am

25 0017-00102-0048 |LEG LEVELERS (4 REQ'D.)

26 | 0017-00103-0026 |NUT 3/8 -16 HEX (FOR LEG LEVELERS) (4 REQ'D.)

  • | NOT PART OF ABOVE ASSEMBLY & MUST BE ORDERED SEPARATELY
Page 19

POWER-DRIVE U.R.- 3 PLAYER - REAR ACCESS.

Page 20

POWER-DRIVE UR. -3 PLAYER -REAR ACCESS

Page 21

POWER-DRIVE U.R. - 3 PLAYER ~ REAR ACCESS PARTS LIST

ORDER BY PART NUMBER ONLY

PART NO. DESCRIPTION

A945-00062-0000 ON-OFF SWITCH & PLATE ASSY.

0017-00032-0105 SWITCH: 2PST 6 AMP

0567-00106-0500 | PLATE: MTG. - SWITCH

PLASTIC PULL & VENT (2 REQ'D.) 0894-00916-0100

0017-00003-0465 |WELLS~GARONER - 19" COLOR DUAL SYNCH HORIZONTAL MTG. MONITOR

AE68-00013-0000 |DUAL POWER AMP P.C.B. W/SPACERS

B084-90910-G000 DUAL POWER AMP P.C.B. ASSY.

0017-00042-0320 | SPACER: SELF RETAINING FOR #8 SCREW (4 REQ‘'D.) AE68-00011-0000 | CARDRACK W/SOUNDS P.C.B. ASSY.

B084-91863-AE68 PROGRAMMED SOUNDS GOOD P.C.B.

SPACER: SELF RETAINING FOR #8 SCREW (4 REQ‘D.) 0017-00042-0320

AE68-00012-0000 |CARDRACK W/MONOBOARD ASSY.

B084-91787-AE68 |PROGRAMMED MONOBOARD ASSY.

0017-00042-0320 | SPACER: SELF RETAINING FOR #8 SCREW (6 REQ'O.)

7 AE68-00006-0000 [MASTER CABLE W/BRKT. ASSY. (INCLUDES FOLLOWING 4 ITEMS)

0017 -00032-0007 |SWITCH: SPDT SLIDE 4 AMP

0515-00107-0000 |BRKT: CREDIT: TEST-SWITCH: VOLUME

0017-00032-0051 |BUTTON: SWITCH, RED

105£-00001-0017 |POT.: 0-1K CBN 1/2W

AE36-00008-0000 |HIGH VOLTAGE CABLE ASSY.

AE36-00002-0000 | VIDEO CABLE ASSY.

AE36-00003-0000 |AUDIO CABLE ASSY.

A945-00059-0200 |POWER CHASSIS: 130VA - SWITCHING W/O SWITCH

AE68-00500-0000 | CABINET ASSY. (INCLUDES ITEMS 12 & 13)

2-7

Page 22

POWER-DRIVE U.R. - 3 PLAYER - REAR ACCESS PARTS LIST (CONT'D.)

ORDER BY PART NUMBER ONLY

ITEM PART NO. DESCRIPTION

12 O£68-00500-0000 {CABINET

13 A961-00007-0000 |CASTER-WHEEL ASSY. (2 REQ'D.)

14 B084-91877-AE68 |LAMP CONTROL P.C. BOARD ASSY.

ADDITIONAL PARTS LIST

0E68-00300-0000 CATALOG: POWER DRIVE U.R. - 3 PLAYER

™051-00E68-A007 TAG: OPTION SWITCH SETTINGS

AE68-00009-0000 REAR DOOR ASSY. (INCLUDES FOLLOWING 5 ITEMS)

0E68-00502-0000 REAR DOOR (WOOD)

0017-00005-0050 DOOR LOCK W/2 INDIVIDUAL KEYS

0017-00005-0209 LOCK PLATE

0017-00009-0490 VENT GRILLE - 5-5/8 SQ. IN. (4 REQ'D.)

0639-00116-00XF CAM: OFFSET 30 DEGREES

2-8

Page 23

HEADER FLUORESCENT LIGHT ASSY--PARTS LIST . PART NO. AS595-00011-0000

ORDER BY PART NUMBER ONLY

DESCRIPTION

0017-00003-0412 {FLUORESCENT STARTER HOLOER W/LEADS

0017-00101-0347 |#6-32 X 172 PHIL. RND. HD. M.S. (4 REQ'D.)

0017-00003-0019 {FLUORESCENT STARTER .

0017-00003-0026 | BALLAST 0017-00101-0598 | #8-32 X 5/16 SLT. HEX HD. SCR. (4 REQ'D.)

2-9

Page 24

CONTROL SHELF ASSEMBLY

PART NO. AE68-00004-0000

Page 25

CONTROL SHELF ASSEMBLY - PARTS LIST PART NO. AE68-00004-0000

ORDER BY PART NUMBER ONLY

ITEM PART NO. DESCRIPTION

1 AE36-00010-00XF |CONTROL ~ APRON WELD ASSY.

2 AE68-00005-0000 {CONTROL SHELF CABLE ASSY.

AE68-00014-0000 {CONTROL PLATE ASSY. (INCLUDES ITEMS 3 THRU 19)

3 AB96-00012-0000 |BALL KNOB & HANDLE ASSY. (3 REQ'D.)

0B 96 -00703-00XF

0B 96-00901 -0000 HANDLE (3 REQ'D.)

BALL-KNOB: BLACK/ROUND (3 REQ'D.)

AB96-00016-0000

AB96~00010-0000 2-WAY SPEED SHIFT (3 REQ'D.) (INCLUDES ITEMS 4 THRU 10)

YOKE MTG. & PLATE ASSY. (3 REQ'D.)

AB96-00013-0000 —L BRKT. & SWITCH ASSY. (3 REQ'D.)

AB96 -00014-0000 SWITCH ASSY. (3 REQ‘'D.)

0B96 -00108-0000 BRKT.: SWITCH (3 REQ'.D)

0017-00101-0528 5-40 X 12 PHILLIPS RND MACHINE SCREW (6 REQ‘'D.) | AB96-00018-0000 YOKE ASSY, & BEARINGS (3 REQ'D.)

0B96-00704-00XF PIVOT: SPRING (3 REQ'D.)

0010-00227-0000 SPRING: TORSION (6 REQ‘'D.)

0017-00041-0616 BUMPER: RUBBER, NEOPRENE (6 REQ'D.) 0852 -00701-00xF [Pr PIVOT (3 REQ'D.) 0896-00106 -0000 [ster (3 REQ'D.) 0£68-00100-00XF PLATE: CONTROL SHELF

0£68-00902-O0XF —_—+___ OVERLAY: CONTROL~SHELF

Page 26

CONTROL SHELF ASSEMBLY - PARTS LIST, CONT'D. PART NO. AE68-00004-0000

ORDER BY PART NUMBER ONLY

ITEM ] PART NO. DESCRIPTION

0017-00032-0093 SWITCH: W/HOLDER, WHITE (3 REQ'D.)

0017-00032-0108 SWITCH: ILLUMINATED, PUSHBUTTON, WHITE-A (6 REQ'D.) re

0017-00042-0301 BUTTON: PUSH, ROUND, YELLOW

0017-00042 -0302 BUTTON: PUSH, ROUND, BLUE

0017-00042-0304 BUTTOH: PUSH, ROUND, RED

0017-001 00-0031 E-RING: +312 $133-31, STEEL (3 REQ‘'D.)

0£36-00106-0000 STRIKE: CONTROL-SHELF (2 REQ‘D.)

al 0£68-00501-0000 CONTROL SHELF: WOOD

Page 27

COIN DOOR W/CABLE: BLACK 3-CHUTE PART NO. A982-00014-0021

FRONT VIEW

3% NOT SHOWN

Page 28

COIN DOOR W/CABLE: BLACK 3~CHUTE PART NO, A982-000 14-0021

BOTTOM VIEW *% NOT SHOWN

Page 29

COIN DOOR W/CABLE: BLACK 3-CHUTE - PARTS LIST PART NO. A982-00014-0021

ORDER FROM COIN-CO BY PART NUMBER ONLY

DESCRIPTION PART NO.

BS-X573-1 LARGE DOOR: 3 SLOT

BS-8000-12 COIN RETURN CUP DOOR (3 REQ'D.)

BS-8000-7 COIN RETURN CUP BEZEL (3 REQ‘D.)

BS-8000-6 COIN ENTRY CASTING (3 REQ'D.)

8000-8 COIN INSERT PLATE (3 REQ'D.)

DENOMINATION INSERT (3 REQ'D.)

REJECT BUTTON RETURN SPRING (3 REQ'D.) 7800-37

7300-105 “C" WASHER (3 REQ‘D.)

7800-11-RED REJECT BUTTON - RED

REJECT BUTTON HOUSING (RED) A780-12-RED

7800-11-AMBER REJECT BUTTON - AMBER

A780-12-AMBER REJECT BUTTON HOUSING (AMBER)

7800-11-BLUE REJECT BUTTON - BLUE

A780-12-BLUE REJECT BUTTON HOUSING (BLUE)

8000-22 WASHER 3/8 0.D. (3 REQ'D.) 8000-24-12 hav WEDGE LAMP (3 REQ'D.)

v78000-23WEDGE LAMP SOCKET (3 REQ'D.)
188000-14HOUSING RETAINING BRKT. (3 REQ‘D.)
198000-9COIN ENTRY CHUTE (3 REQ'D.)

3300-34 “C" WASHER (3 REQ'D.)

REJECT LEVER ASSY. (3 REQ‘D.) 8000-21

TORSION SPRING (3 REQ‘D.)

7600-141-1 MECH. RETAINING BRKT. (3 REQ'D.)

6-32 X 1/4 PHILLIPS PAN HEAD SCREW (27 REQ‘D.) 216-6-4

NYLON WASHER (3 REQ'D.) 606-110-N

Page 30

COIN DOOR W/CABLE: BLACK 3-CHUTE - PARTS LIST, CONT'D. PART NO. A982-00014-0021

ORDER FROM COIN-CO BY PART NUMBER ONLY

PART NO. DESCRIPTION

0017-00005-0003 COIN ACCEPTOR W/STRING CUTTER (3 REQ'D.) OR

0017-00005-0214 COIN ACCEPTOR W/STRING CUTTER

404-4 4-40 HEX NUT (6 REQ'D.)

8000-10 MECH. MTG. BRACKET “STAKED" (3 REQ'D.)

8000-18 SW. CHUTE (SMALL) (3 REQ‘D.)

7300-134 SWITCH INSULATOR (3 REQ‘D.)

7300-100-1 BLUE, SWITCH (3 REQ'D.)

8000-19 5¢ / 25¢ / SW. WIRE (3 REQ'D.)

101-4-16 4-4 X 1" ROUND HEAD MACHINE SCREW (6 REQ'D.)

8000-28 SWITCH COVER (3 REQ‘D.)

8000-13 COIN RETURN CUP (3 REQ'D.)

8800-9-1-R SLAM SWITCH BRACKET

7800-42 SLAM SWITCH

100-4-6 4-36 X 3/8 ROUND HEAD MACHINE SCREW (3 REQ'D.)

8800-24 DBL. BTD. LOCK & KEY W/HUTS

X615 LOCKING CAM

7800-7 KEY HOOK

0017-00007-0019 |KEY HOOK

A090-00089-0000 COIN METER ASSY. W/DIODE

A982-00015-0011 COIN DOOR CABLE ASSY.

0017-00009-0609 GROUND STRAP: L = 7" W/BLACK COVER

0017-00103-0061 NUT: 8-32 HEX W/SEMS ST. (2 REQ'D.)

0017-00103-0084 NUT: 6-32 HEX W/SEMS ST. (2 REQ‘D.)

0017-00104-0019 WASHER: 6 145 - .375 - 032 FLAT ST.

NOT PART OF ABOVE ASSEMBLY & MUST BE

ORDERED SEPARATELY, THROUGH BALLY MIDWAY MFG. CO.

2-16

Page 31

POWER CHASSIS: 130VA (SWITCHING)

PART NO. A945~00058-0200 |”

247!

Page 32

POWER CHASSIS: _130VA (SWITCHING) PARTS LIST PART NO. A945-00059-0200

ORDER BY PART NUMBER ONLY

PART NO. DESCRIPTION

A945-00057-01XF |CHASSIS SUB-ASSEMBLY

0945-00117-O1XF |POWER SUPPLY COVER E

0017-00101-0123 {8 X 4 UNSLOT HEX HD. SCREW (8 REQ'D.)

4 0017-00003-0543 |SWITCHING POWER SUPPLY - 125VA 5 0017-00042-0663 LOCKING P.C. BRD. SPACER (4 REQ'D) 7

6 0540-00138-2100 |CABLE PROTECTOR - 5"

7 0017-00101-0134 |6-32 X 4 PHIL. ROUND HD. SCREW

8 MTOO-00136-A000 [ISOLATION TRANSFORMER W/O SHIELD ASSY.-115V., 50/60 HZ.

9 0017-00103-0061 |8-32 HEX NUT W/SEMS (4 REQ'D) (NOT SHOWN)

10° |0017-00003-0114 {LINE FILTER - 5 AMP, 115VAC (NOT SHOWN)

ll 0017-00101-0067 {6 X 6 PHL. PAN HD. (2 REQ'D)

12 0017-00003-0433 |FUSE HOLDER

0017-00003-0263 {FUSE MDA, 3AG, 4 AMP, 115 VAC

A945-00030-0600 |CONNECTOR & CABLE ASSEMBLY

0017-00021-0370 |TERMINAL STRIP

0017-00101-0140 |4-40 X 5 PHL. PAN HD. SCREW (2 REQ'D)

0017-00009-0580 |CAPACITOR ALIGNMENT TOOL

0945-00912-0000 |ADJ. TOOL HANDLE

ADDITIONAL PARTS LIST

115£-00001-0004 {VARISTOR-METAL OXIDE (UNDER CHASSIS)

0017-00021-1110 |2 POSITION TERMINAL BARRIER STRIP (UNDER CHASSIS)

0017-00101-0780 |6 X 8 PHIL. PAN HD. SCREW (UNDER CHASSIS)

0017-00103-0084 {6-32 HEX NUT W/SEMS (UNDER CHASSIS)

2-18

Page 33

SECTION 3

COMPONENT LAYOUTS, SCHEMATICS & WIRING DIAGRAM

Page 34

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 35

WELLS GARONER ELECTRONICS CORPORATION concneo. auproe couse

19" COLOR MONITOR SCHEMATIC DIAGRAM

Page 36

Aug sect RED XIOL.KIOS and X10 VIDEO AMP. 25C454C X102.X104 end_XIO6 VIDEO AMP. 2SA673C Soa

  • 2sCzein ee eseislae

[x301,x302,x308,x306 SYNC AMP fescasac secises,

F504 BLANKING 25C434C or dtcwcer

X40 POWER DRIVE 2502688 % 902 ERROR AMP 2SC1890 |

Bhivca aeciase ER REGUL She heal 8 | eos pea wow >|

x02 t a = Ee [eens = z 7 asoshe it ai [= ft t- G2 Ge) ‘

L Schematic Notes Unless otherwise specified Resistance: (Q) (K+KQ, M~MQ), 1/4 (W) carbon resistor Capacitance: 1 or higher (pF), less than 1 (yF) working voltage -~ 50 (V) ceramic capacitor Inductance: (HH)

SU -1133A MAIN PCB ASSY 2501 4D oxy our XTO1 X-RAY PROTECTOR sor ©O, 2sces7v 230898 of 28C454C o 2SC1685 BEEP ES zece Electrolytic Cap: Capacitance Value (F)/working voltage (V) NP — non-polar (or bipolar) electrolytic cap. Refer to the parts list for additional component information 2 indicates test point connection BSEREI or BezswEK 250808 7h indicates chassis ground unless otherwise specified 250820 ACI2OV GoHusSoH | Hz sox indicates cycles per second For safety purposes (and continuing reliability) 4 teplace all components marked with safety syrnbol with identical type

NOTE. FR — fusible resistor 22+

00-4147-04 Parts identification on circuit boards: Go7-CB0 e.g. SU1126A (R107 = R1107) SU3030A (R113 = 93113)

3-4 debe

Ce Le

Page 37

CRT Socket P.C.B. Ass y (SU-3032A) Parts List (uit, Main PCB Ass’y (SU-1133A) Parts List (Cont.) Coils Colts

SymbolDescriptionPart NumberSymbolDescriptionPart Number
13101Peaking CoilQQL043K-101L1502Linarity Coil39835
Components identified by the A symbol in the PARTS LIST and on the Schematic have special characteristicsSemi-(1503Width Coil€30380-A
important to safety.Sinductors11504Heater Choke—C30445-A.
._.SymbolDescriptionPart Number
DO NOT degrade the safety of the set through improper servicing.X3101Si. Transistor28C1514VCaepen otionPare-
X3102Si. Transistor28C1514VCT1501Hor. Drive Transf. A46022-BM
X3103Si. Transistor28C1514VC11503Side Pin Transt.C39050-A
Abbreviations for Resistors and CapacitorsMiscellaneousSemt.
SymbolDescriptionPart NumberSondhictots
ResistorCapacitor4ACRT SocketAT606SSymbolDescriptionPart Number
75;501
CR:Carbon ResistorC Cap.:Ceramic CapacitorMain PCB Ass’'y (SU-1133A) Parts Listxaiot& Transistorteen eesirl
Comp. R:Composition ResistorM Cap.:Mylar CapacitorResistorsX1102Si. Transistor2SA673(C)
OM ROxide Metal Film ResistorE Cap.:Electrolytic CapacitorSymbolDescriptionPart NumberX1103Si. Transistor2SC1685(R)
vRVariable ResistorBP E Cap.:Bi-Polar (or Non-Polar)R1406VvR 2002QVZ3230-002xtiee= qanectgoeread
MFR:Metal Film ResistorElectrolytic CapacitorF1408veeeqv29280-002adieSR)
CMF R:Coating Metal Film ResistorMM Cap.:Metalized Mylar CapacitorRaeoa f be Ww 7Saattorene" seeS qanatineosciesanl
UNF RNonflammable ResistorPP Cap.:Polypropylene CapacitorR1415OmR piratepaieabeersX1302Si. Transistor2SC1685(R)
FR:Fusible ResistorMPP Cap.:Metalized PP CapacitorR1421OMR 12Ka2WJQRGO26J-123ZX1303Si. Transistor2SA673(C)
PS Cap.:Polystyrol CapacitorR1422VR 10KQVZ3230-014X1304Si. Transistor = 28 1685(R)
Tan. Cap.:Tantal CapacitorAFR1401AFR 6822WKarHo2sK-680m—-X1305Si Transistor=» 28 1685(R)
..,eeae.A\R1503ACMF R 11.8KQ%W+1%— QRV142F-1182HeelSt Transistor280478
NOTE: When ordering replacement parts please specify the part number as shown in this list including part name, andR1504VR 5KaQVZ3230-053x1402Si. Transistor280478
model number. Complete information will help expedite the order.R1509OMR 10KQ2WJQRGO26J-103ZxeP eeepanei LM)
Use of substitute replacement parts which do not have the same safety characteristics as specified, may create shock,ae :on5 soonewi iOncocereeee1902Si. Transistor2SC1890A (E.F)
fire or other hazards. For maximum reliability and performance, all parts should be replaced by those having identical:R1515cme A BROWSGaxoiaseRaoneerieWee
specifications.R1522CMF R 4.701WSQRX019J-4R701103Si. DiodeWo6A
R1523OMR 6822WJQRGO26J-680Z01301Si. Diode18Z473H
7..R1528OMR 39001WJQRGO19J-39101401Si. Diode1SZ473H
SERVICE REPLACEMENT PARTS LISTPurity Shield Ass’y. Parts ListR1534ZNoRERZ-COSZK4711402Zonee DiodeRDIOF(C)
SymbolDescriptionPart NumberSymbol_DescriptionPart NumberVASOaNERZ-COSZK271DissSi. DiodeHF-1
Main P-C.B. Ass'ySU-1133ADegaussing Coil21-1007-30AR1703ACMF R 390%W+1%QAV122F-390201504Si. DiodeVvose
CRT Socket PC.B. AssySU-3032A0911,AR1704ACMF R 7.68KQY%W+1%QRV142F-768101505Zener DiodeRD11€(B)
Purity Shield Ass'y07-220083-03D912Rectifier 1 Amp 600V (2)28-22-27AR1901APosistorereals1506Si. DiodeWOGA:
;.Pin Terminal (2)34-708-01R1902UNF R 2Q7WKQRFO76K-2RO01507Si. Diode18881
Outside of the P.C.B. Ass'yPin Termina\ Housing34-709-01R1903CMF R 4.723WJQRX039J-4R7D1508Si. Diode1SZ473H.
SymbolDescriptionPart NumberPurity Shield (2 pes.)35-3847-01R1904OMR 10KQ2WJQRGO26J-1032AD1701AZener DiodeRO20Ev2
Picture Tube 19"17-7198-03Purity Shield (2 pcs.)35-3847-02R1905,OMR 18KQIWJQRGo19-18301901ASi, Diode181887A
AADetiection YokeA29779-DceiCapacitor 100nF 10% 400V48-171544-62Aars08ACMF R 4704W+1%arviz2F-470z1902ASi. Diode1$1887A
PC MagnetA75034-BR921Resistor, Wirewound 330,4W42-119301-03AR1909v_R 2koQvPsa0B-023E © AD1903ASi. Diode1818874
AAsFlyback Transf.A29951-BFire Retardant Term. Strip 4 Lug34-492-09R1910ACMF R 2.74KQxW+1% — QRV142F-2741401904ASi. Diode1818878
AAHVR‘A46600-AAFR1901AF — -R 2200%WKQRH124K-221m401905AZener DiodeRD6.8EV3
ROSUNF Resistor 2202,25W KQRF258K-221.zi.
coaC Capacitor 150pF, AC1SKV—QCZ0101-005CRT Socket. P.C.B. Ass'y (SU-3092A) Paris ListCapacitorsMiscellaneousa
x01Si. Transistor2SD870ResistorsSymbolDescriptionPart NumberSymbolDescriptionPart Number
X02Si TransistorBECLOGA.SymbotDescriptionPart NumberC1301BPE Cap. 3.3uF SOVAQEN61HA-335zAF 1901AFuse 1.254QMF53U1-1R25S
scScrew #8-%31-610818-06R310VSR 200QVz3234-022C1402Tan Cap. 2.2uF 16V KQeEsicK-2258AF 1902AUL Fuse 3Quee6U1-3ROS
scScrew % x % Pix Tube Mtg. (4).31-601418-12R3106VvR 200QVZ3234-022c1407ECap. 4.7uF 6.3VAQEWS1JA-475,
WAPyramidal Lock Washer (4)33-255-01R3113VvR 5KQVZ3234-053c14ttECap. 100uF 160V AQEWS2CA-107|
Nut Retainer, Pix Tube Mtg. (4)33-494-01R3114vR 5KQVZ3234-053C1412ECap. 3.3uF 160V AQEWS2CA-335i
Clip—P-C.B. Support33-629-02R3115voOR 5KQVZ3234-0531508PP Cap. 5600uF SOV JQFP31HJ-562
Standoti33-670-010R-02R3116OMR10K22WJQRGO29J-103Ac1512APP Cap. 2000pF DC1500V J. QFZ0082-202
Wire Terminal (Gnd. Strap)34-228-03R3117OMR10Ka2wJQRG029J-103AC1513APP Cap. 2000pF DC1500V 5. QFZ0082-202
Terminal Lug (Gnd.)34-33-04R3118OMR10K22WJQRGO29J-103Acisi4APP Cap. 2000pF DC1500VJQFZ0082-202
Groundstrap Assy.34-574-02R3119Comp.R 3.3K2%W KQRZ0039-332C1515PP Cap.0.53uF DC1200VJ—QFZ0067-534
Grounding Spring35-212-03R3120Comp.R 3.3Ko%w KQRZ0039-332C1520BPE Cap. 3.3uF SOV AQEN61HA-335Z
Wire Hook (Gnd. Strap)35-3053-02R3121Comp.R 3.3K24W KQRZO039-332C1523€Cap. 1uF 160VAQEW62CA-105Z|
Purity Shield Holddown Clamp35-2348-01Capacitors:C1524M_Cap 0.1uF 200V KQFM720K-104M!
Support Brkt, RH38-3890-01SymbolDescriptionPart NomiberAc1531APP Cap. 2000pF DC1500V JQFZ0082-202:
Support Brkt. LH35-3890-02C3107—Cap.10uF 250VAQEWS3EA-106Acis32APP Cap. 1S00pF DC1S00V J QFZ0082-152
Chassis Base38-49-02C3108CCap. 1000pF DC1400VP—QCZ9001-102MC1904ECap.QEY0034-001
Yoke Wedge (3)39-1233-01C1905ECap. 10uF 250V AQEWS2EA-106

3-5

Page 38

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 39

MONOBOARD A084-91787-F000 051-00114-F156

(CROSS REFERENCE LIST: Page 1 of 9

DESCRIPTIONgryDESIGNATION NO.PART NO.
18 PF AX. CER.460,C62,C67,C680A15-00800-0011
33 PF AX. CER.2S,C650986-00800-0300
47 PE AX. CER647-0520986-00800-2800
68 PF AX. CER.3C57,C63,0640360-00800-0028
270 PF AX. CER.2©69,C700A15-00800-0013
390 PF AX. CER.5C1,C2,C41,C42,0550986-00800-3000
820 PF AX. CER.4C43-C460945-00816-0400
-O1 UF AX. CER.146P1-CP65 ,C67-C1420386-00800-2000

C40 ,C58,059,C61,C66

-1 UF AX. CER.33C6-C380986-00800-1100
10 UF 25V AX. TANT.2.4,0390986-00800-0700
47 UF 25V RD TANT1fost.)0A59--00800-0001
100 UF 16V RD TANT1(660945-00811-0500
470 UF 16V AX. ELEC.3€3,C53,C540986-00800-2700
10 OM 1/4W 5% CRBN.6R58,R59,R61,R62,R64,100E-00005-0011

R6S

22 OHM 1/40 5% CRBN.1R48100E-00005-0016
47 OHM 1/4W 5% CRBN.4 — R88-R90,R93100E-00005-0025
68 OM 1/4W 5% CRBN.4 ~— R50,R51,R91,R92100E-00005-0629
82 OHM 1/4W 5% CRBN.7-R9,R80,R87,R96 ,R97,100E-00005-0031

RLOO,R1O1

220 OHM 1/4W 5% CRBN.32 = R14-R45100E-00005-0041
470 O8M 1/4W 5% CRBN.3R60,R63,R66100E-00005-0051
510 O&M 1/4W 5% CRBN.3R69,R72,R76100E-00005-0053
560 Ob 1/4W 5% CRBN.3.-RS7,R77,R78100E-00005-0054
680 OHM 1/4W 5% CRBN.4 — R94,R95,R98,R99100E-00005-0056
1K OM 1/4W 5% CRBN.5R68,R71,R73,R75,R86100E-00005-0061
2K OHM 1/4W 5% CRBN.3.-R67,R70,R74100E-00005-0068
2.7K OHM 1/4W 5% CRBN.2R46,R47100E-00005-0071

4.7K OHM 1/4W 5% CRBN. 20 = R1,R2,RS-R7,R1O0-R13, — 100E-00005-0079 R49,R52-R56 R79, R81-84

10K OHM 1/4W 5% CRBN.2R3,R4100E-00005-0088
82K OHM 1/4W 5% CRBN.1RB100E-00005-0112
1K OHM 9 PIN SIP4RM6-RM9102E-00004-0011
2.7K OHM 10 PIN SIP4RMI-RM4102E-00004-0020
4.7K OFM 10 PIN SIP1RMS102E-00004-0026
1N4148 DIODE2Di1,b2103E-00002-0005
2N4123 NPN XSTR.2Q1,04104E-00001-0007
2N4403 PNP XSTR.1QQ104E-00002-0006
MPSA70 PNP XSTR6-Q10104E-00002-0012
TIP110 NPN XSTR.1@104E-00009-0001
20 MHZ COSC.1Ic 1E0304-00804-0007
74061Ic 2K0986-00803-7600
74ALS201IC 6D0A59-00803-0015

REL FO! MONOBOARD A084-91787-F000 051-00114-F156

CROSS REFERENCE LIST: Page 2 of 9

DESCRIPTION QIY —_— DESIGNATION NO. PART NO.

74F001Iclr0A59-00803-0001
748041oiK0A59-00803-0034
74F081Ic 14K0A59-00803-0030
74F101IC 9%0A59-00803-0002
74742.Ic 2E,10H0A59-00803-0003
74862.IC 10F,7H0A59-00803-0031
741574IC SC,6C,8C,660A59-00803-0004
741742IC 8D, 2H0A59-00803-0005
74LS002IC 14A,6F0304-00803-0010
7ALsO2loicw0986-00803-7400
74LS082Ic 1G,4H0986-00803-7300
74LS203IC 2F,3F,12H0986-00803-1004
74LS324IC SP,1H,4K,1A0986-00803-6100
7ALS55,lIcw0A59-00803-0026
74LS746IC 12E,15F,3K,5K,6K,0986-00803-1005

15K

TALS862Ic 13¢,8H0986-00803-9900
74181382IC 10E,260986-00803-6500
74LS1532.Ic 1M4c,15D0A59-00803-0006
74LS1576IC 5A,3C,7C,7D,11D,3G 0304-00803-0021
7418161loci0986-00803-1003
7aisi63.ON3.Ic 3D-SD0A59-00803-0008
74LS1694IC %,10G,7K,9K0304-00803-0023
T4LS173lc 8%0A59-00803-0009
74LS1743Ic 12p,14H,13K0304-00803-0024
TALSLISloic40304-00803-0025
74LS1948IC 13D,11E,13E,14E,0304-00803~0026

12R-14F,14G

74LS2448IC BA-12A,4C,11C,2D0986-00803-4800
74LS2453IC 18,988,1080986-00803-6400
74LS2582Ic 136,1380304-00803-0028
74LS2736IC 6A,7A,15B,15C,10D, 0986-00803-4700

3H

74LS2832IC 76,650304-00803-0030
74182982IC 15E,12k0AS9-00803-0010
7418367lIci0986-00803-7000
74LS3681IC3E0a59-00803-0011
74LS3748IC 12G,9H,11H,8J,10J, 0986-00803-4600

125, 8K, 11K

74LS3773IC 8,128,1380A59-00803-0012
74LS3782IC 78,9F0A59-00803-0013
748042Ic 1D,4F0986-00803-6600
COLARB RI PAL1Ic”066 1-00803-0001
MMCOLA HALl=ic4¢0986-00803-8900
§4002B HALlIc 6H0986-00803-9000
40038 HAL1Ics0986-00803-9100
Mic06 HAL1Ic SH0986-00803-9200
PACNS REV 1.0 PLA1Ic2AS9A-26AAJ-BXED

MONOBOARD: A084-91787-F000 051-00114-F156

CROSS REFERENCE LIST: Page 3 of 9

DESCRIPTION ay DESIGNATION NO. PART NO.

PACOUT REV 1.0 PLA ROMCTRI. REV 1.0 PLA

2018 2Kx8 RAM 45NS 2018 2Kx8 RAM SSNS 6116 2Kx8 RAM 120NS 6116 2Kx8 RAM 150NS 93419 64x9 RAM

280B z80B CIC BGO 64K ROM/EPROM BGl 64K ROM/EPROM FGO 256K ROM/EPROM FG] 256K ROM/EPROM FG2 256K ROM/EPROM FG3 256K ROM/EPROM PROGO 256K ROM/EPROM PROG]. 256K ROM/EPROM

16 PIN IC SOCKET(.300) 20 PIN IC SOCKET(.300) 24 PIN IC SOCKET(.300)

24 PIN IC SOCKET(.600) 28 PIN IC SOCKET(.600)

40 PIN IC SOCKET(.600)

AUTO INSERT PIN TIN .025 SQ

AUTO INSERT PIN TIN .025 SO

AUTO INSERT PIN TIN .025 SQ

AUTO INSERT PIN TIN .025 SQ

AUTO INSERT PIN TIN .025 SQ

AUTO INSERT PIN TIN .045 SQ

FERRITE BEAD

ZERO OkM RESISTOR 6 (JUMPER) a

ll el

bw

sa

B Ic 30 Ic 130

IC 11G,10K,9J, 11d Ic loc Ic 1B IC 6B,9B IC 4A

Ic lc Ic 2c IC 15A IC 14B IC 8E IC 6E Ic SE IC 4E IC 3B Ic SB

ICS 3E ICS 5G,5H,2J3,3J,13J ICS 10C,4G,9D,11G,6H, 93,113, 10K ICS 6B,9B,11B ICS 4A,15A,3B,5B,14B, 2C, 4E-6E, 8E Ics 1c

J2

JB

J4

J6

Jl

FB1-FB13

‘JW1-IW6 AS9A-26AAJ-AXHD AS9A-26AAJ-CXHD

0A59-00803-0028 0A59-00803-0029 0A59-00803-0027 OA59-00803-0014 0986-00803-9600

0304-00803-0041 0304-00803-0040 SEE ROM/EPROM CHART SEE ROM/EPROM CHART SEE ROM/EPROM CHART SEE ROM/EPROM CHART SEE ROM/EPROM CHART SEE ROM/EPROM CHART SEE ROM/EPROM CHART SEE ROM/EPROM CHART

110E-00001-0003 110E-00001-0005 110E-00001-0009

110£-00001-0007 110E-00001-0010

110£-00001-0011

0304-00804-0009

0304-00804-0009

0304-00804-0009

0304-00804-0009

0304-00804-0009

0304-00804-0010

0316-00804-0002

117E-00001-0003 3-7

Page 40

MONOBOARD AN84-91787-F000 M051-00114-F156

CROSS REFERFNCE LIST: Page 4 of 9

DESCRIPTIONaryDESI@SATION NO.PART NO.
SWITCH PC. MIG-1Sal0986-00804-3100
10 POS. DIP SWITCH1Sw,113E-00001-0004
SNAP1MHQ3Q017-00007-0134
PC BOARD1A080-91787-F000

MONOBOARD A084-91787-F000 051-00114-F156

DESIGNATION LIST: Page 5 of 9

DESCRIPTION DESIGNATION NO.

clr -O1 UF AX. CER. P66 100 UF 16V RD. TANT P67-CP 142 -Ol1UF AX. CER. c1,c2 390 PF AX. CER. or} 470 UF 16V AX. ELEC. ca 10 UF 25V AX. TANT. Oo 33 PF AX. CER. C6-C38 ~1 UF AX. CER. 039 10 UF 25V AX. TANT. can, +01 UF AX. CER C41,C42 390 PF AX. CER. C43-C46 820 PF AX. CER. 47-C8? 37 PF AX. CER. 53,054 470 UF 16V AX. ELEC. os 390 PF AX. CER. ce 47 UF 25V RD. TANT. co? 68 PF AX. CER. 58,59 01 UF AX. CER. 60 18 PF AX. CER. Col -01 UF AX. CER- 62 18 PF AX. CER. 63 68 PF AX. CER. C64 68 PF AX. CER. 65 33 PF AX. CER. C66 .O1 UF AX. CER. 67 18 PF AX. CER. C68 18 PF AX. CER. 69 270 PF AX. CER c70 270 PF AX. CER RL,R2 4.7K OBM 1/4W 5% CRBN. R3,R4 10K OHM 1/4W 5% CREN. R5-R7 4.7K OFM 1/40 5% CRBN. RS 82K OHM 1/4W 5% CRBN. Ro 82 OHM 1/4W 5% CRBN. RLO-R13 4.7K OHM 1/4W 5% CRBN. R14-R45 220 OHM 1/4W 5% CRBN. R46,R47 2.7K OBM 1/4W 5% CRBN. R48 22 OHM 1/4W 5% CRBN. R49, R52-R56 4.7K 1/4W 5% CRBN. R50,R51 68 OHM 1/4W 5% CRBN. R57 560 OHM 1/4W 5% CREN. R58,R59 10 OHM 1/4W 5% CRBN. R60 470 OBM 1/4W 5% CRBN. R61,R62 10 OEM 1/4W 5% CRBN. R63 470 OHM 1/4W 5% CRBN. RO4,R65 10 O#M 1/40 5% CRBN. R66 470 O8M 1/4W 5% CRBN- R67 2K OBM 1/4W 5% CRBN. R68 1K OHM 1/4W 5% CRBN. R69 510 OHM 1/4W 5% CRBN. R70 2K OHM 1/4W 5% CRBN. MONOBOARD 4084-91787-F000 M051-00114-F156

DESIGNATION LIST: Page 6 of 9

DESCRIPTION DESIGNATION NO.

R71 1K OM 1/4W 5% CRBN. R72 510 OHM 1/4W 5% CRBN. RIB 1K OHM 1/40 5% CRBN. RI4 2K OHM 1/4W 5% CRBN. RIS 1K OFM 1/4W 5% CRBN. R76 510 OHM 1/4W 5% CRBN. R77,R78 560 OHM 1/4W 5% CRBN. RIS 4.7K OFM 1/4W 5% CRBN. R80 82 OHM 1/4W 5% CRBN. R81-R84 4.7K OEM 1/4 5% CRBN. R86 \K OHM 1/4W 5% CRBN. R87 82 CEM 1/4W SB CRBN. R88 47 OHM 1/4W 5% CRBN. R89 47 OHM 1/4W 5% CRBN. R90 47 OHM 1/40 5% CRBN. ROL 68 OHM 1/4W 5% CRBN. P92 68 OHM 1/4 5% CRBN. R93 47 OHM 1/4W 5% CRBN. R94 680 OHM 1/4W 5% CRBN. RIS, 680 OHM 1/4W 5% CRBN. R96 82 OHM 1/4W 52 CRBN. R97 82 OEM 1/4W 5% CRBN. RIB 680 CH 1/4W 5% CRBN. R99 680 OHM 1/4W 5% CRBN. R1OO 82 OHM 1/4W 5% CRBN. ROL 82 OFM 1/40 5% CRBN. RMI-RM4 2.7K OM 10 PIN SIP PMS, 4.7K OHM 10 PIN SIP

RM6-PM9 1K OR 9 PIN SIP

Dl,D2 1N4148 DIODE Ql 2N4123 XSTR. a 2N4403 XSTR. B TIPO XSTR. fon] 2N4123 XSTR- -O10 MPSA70 XSTR. IC 1A 74LS32 Ic 4A 93419 64x9 RAM IC 5A 7ALS157 IC 6A,7A 74LS273 IC 8A-12A 74LS244 IC 144 74Ls00 IC 15A BGO 64K ROM/EPROM Ic 1B 748245 1c 28 No? USED IC 38,5B PROGO,PROGL] 256K ROM/EPROM IC 6B 6116 2Kx8 RAM 150 NS. IC 88 TALS245 IC 9B 6116 2Kx8 RAM 150 NS. IC 108 74LS245

Page 41

MONOBOARD A084-91787-F000 M0S1-00114-F156

DESIGNATION LIST: Page 8 of 9

DESCRIPTION DESIGNATION NO.

Ic 1G 74LS08 Ic 2G 74LS138 IC 3G 74LS157 Ic 4G MMCOLA HAL IC 5G MMCO3B HAL Ic 66 74F157 Ic 7G 74LS283 IC 86 74LS173 IC 9G,10G 74LS169 Ic 11G 2018 2Kx8 RAM 45NS Ic 126 T4Ls374 Ic 136 74LS258 Ic 14G 74LS194 Ic lu 74LS32 IC 2H 74F174 IC 3H 74LS273 Ic 4H 74LS08 IC SH MMcO6 «HAL IC 6H MMCO2B HAL IC 7H 74F86 IC 8H T4LS86 IC 9H 74LS374 IC 10H T4E74 Ic 11H 74LS374 IC 12H 74LS20 Ic 13H 74LS258 Ic 14H T4LS174 Ic lu 74LS55 Ic 2 PACNS REV 1.0 PLA Ic 3 PAQOUT REV 1.0 PLA Ic 43 74LS175 IC 63 74LS283 Ic 7 74LS02 Ic 8J T4LS374 Ic 93 2018 2Kx8 RAM 45NS Ic 10g 74LS374 Ic lly 2018 2Kx8 RAM 45NS Ic 129 74LS374 Ic 130 ROMCNIRE REV 1.0 PLA Ic 140 74Lsi61 Ic 1K 74504 IC 2K 7406 IC 3K 74LS74 Ic 4K 7ALS32 IC 5SK,6K 74LS74 Ic 71K 74LS169 IC 8k TALS374 IC 9K 74LS169 Ic 10K 2018 2Kx8 RAM 45NS Ic 11K 74LS374 MONOBOARD A084-91787-F000 051-00114-F156

DESIGNATION LIST: Page 7 of 9

DESCRIPTION DESIGNATION NO.

Ic 118 6116 2Kx8 RAM 120 NS. IC 128,138 748377 Ic 148 BG] 64K ROM/EPROM Ic 158 74LS273 Ic 1c 280B CPU Ic 2c 280B CIC IC 3c 74LS157 Ic 4c 74LS244 IC 5C,6C 748157 Ic 7¢ 74LS157 Ic 8c 748157 Ic loc 2018 2Kx8 RAM SSNS Ic lic 74LS244 Ic 13¢ 74LS86 Ic lac 7ALS153 Ic 15¢ 74LS273 Ic 1p 74804 IC 2D 7418244 IC 3D-5p 74LS163 Ic 6D T4ALS20 IC 7D 74LS157 Ic 8D 7aP174 Ic 9D Colarb RL Pal Ic 10D 7ALS273 Ic 11D 7418157 Ic 12> 74Ls174 Ic 13D 74LS194 Ic 15D 74LS153 IC 1E 20 MHZ COSC. IC 2E TAE14 IC 3E 74LS368 IC 4E-6E,8E FG3,FG2,FG1,FGO 256K ROM/EPROM IC 9E 74F10 IC 10E 74LS138 Ic l1lE 74LS194 Ic 12E 74LS74 IC 138,14E 7418194 IC 15E 74LS298 Ic 1F 74LS367 IC 2F,3F 74LS20 IC 4F 74804 IC 5F 74Ls32 IC 6F T4LS00 Ic 7F 74LS378 Ic 8F 74L8377 IC 9F 74LS378 Ic 10F 74686 Ic llr 74500 IC 12F-14F 74Ls194

Ic 15F T4LsT4 MONOBOARD A084-91787-F000 M0S1-00114-F156

DESIGNATION LIST: Page 9 of 9

DESCRIPTION DESIGNATION NO.

Ic 12K 74LS298 Ic 13K 74LS174 Ic 14K 74608 Ic 15K 74LS74 ICS 4A,15A,3B,5B 28 PIN ICS 6B,98,11B 24 PIN ICS 148 28 PIN IC SOCKET (.600) Ics 1c 40 PIN IC SOCKET (.600) ICS 2C 28 PIN IC SOCKET (.600) IcS 10C 24 PIN IC SOCKET (.300) IcS 9D 24 PIN IC SOCKET (.300) ICS 3E 16 PIN IC SOCKET (.300) ICS 4E-6E,8E 28 PIN IC SOCKET (.600) Ics 4G 24 PIN IC SOCKET (.300) ICS 5G 20 PIN IC SOCKET (.300) Ics 11G 24 PIN IC SOCKET (.300) Ics 5H 20 PIN IC SOCKET (.300) ICS 68 24 PIN IC SOCKET (.300) ICS 25,33 20 PIN IC SOCKET (.300) ICS 9J,lld 24 PIN IC SOCKET (.309} Ics 133 20 PIN IC SOCKET {.300) Ics 10K 24 PIN IC SOCKET (.300)

FB1-FB13 FERRITE BEAD

WL SATTCH PC. MIG. SWZ 10 POS. DIP SWITCH JW1-JW6 JUMPER J AUTO INSERT PINS TIN .045 SQ. PIN J2-J6 AUTO INSERT PINS TIN .025 SQ. PIN MEQ3 ‘SNAP PC BOARD A080-91787-F000 IC SOCKET (.600) IC SOCKET (.600)

Released 12 Sept. 86 QM

3-9

Page 42

3-10 INPUT2US:

SHEETS 2-9

ourput_aus SHEET 2 2pcor7> FReeze~

sycose C> SHEET e EXTRESETS <<} SHEET 2 pew FEN, nreser~ fet Bacoor is) CREWS Pisce |

  • Pixs | seckcrouns — FL acres _| Poco | fore

Coco fare Devaux Vass ~xau9 wana

puns. SHeeTS 22-23 nOnTTOR_aUs Smee 4

WALNK ‘vB CRPBLHK

weuKe. weuxe

wou coLor_our

2acoorisy

WELK PURS neeseT~ purss.

SCRNFLP

Tine ase ForecRouna SHEETS 19-21

JL = 12 PIN KKIS6 RAIN POUER CONNECTOR

a a a a an a a a an Sn1e? ei

exteeseT= a ee ee Fauo znoM oH Pyne | Uvine Purse. fF Freon | [rcom | re | Bidder 199709466 192014 com omen BALLY NIDHAY RFE. CO. HOMOBOARD PC.

Tor LeveL sHeeTs 1-4

ijput-sus. J2 = 19 PIN Ket08 ve 1[> we we ve we we we se ALLY NIDUAY RFE. awtcx ALLY MIDUAY MF. cO. TL PER HONOBOARD PC.

9 scr at

Page 43

183104]

j=aaxen a 4 eos rz een ee

Peers) ems fF

aimee

¥01934N09 ¥OL1HOM

‘sne"WOL THOM ecsied s31v9 2aves

Page 44

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 45

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 46

3-14

Page 47

48 EIFS 24pt2 1

Page 48

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 49

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 50

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 51

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 52

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 53

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 54

3-22 > > > >

1 pp? vSYNe~

7406 %

cRURW nauk [> svn [> enesuxk [>> oD

Page 55

ee tetennetanrnvanrenn ale Ta ¢ ° > o Q z roy a

e

j <

zordo

to ier) al wo Es a i ae = the a = 32 Jaa. + oo a tf ow + SS ES OF eg (DO NOT SCALE ows. fo} . vo ° = ° a oO 1 wil ¢ =: = 3 FS oO 3 fl 0 4 g: ° Sl Sel, 4 z] 4 ees . &

Ld | 9 fo} iz Z 9 S| zac = zZ0a cor aon o o s|/g | 02 o| @ az #) 5 ja Som Slelsz% wot fo} Ge sajna" o sit < iy

x

Zz fay w = rs) SOUNDS GOOD A084-91863-8000 M051-00114-B151 (Page 1 of 5)

DESIGNATION LIST

DESIGNATION DESCRIPTION CP1-CP7 ,CP9-CP13 -O1MF AX CER. cp14,CP15 10MF AX TANT. CP16 100MF AX ELECT. CP101,CP102 O.1UF AX CER. C1,C2 390PF AX CER. C3-C5 1OOPF AX CER. C6,C7 820PF AX CER. c8-C11 1OOPF AX CER. C€101,C102 390PF AX CER. C103 1MF RD TANT. C104 .O1MF AX CER. C105 47MF AX ELECT. C106 680PF AX CER. C107 .O1MF AX CER. C108 IMF RD TANT. C109 68PF AX CER 10% C110 .O1 MF AX CER. Clll 150PF AX CER 10% C112 470 PF AX CER 10% C113 270 PF AX CER 10% c1l4 1MF RD TANT. C115 5600PF AX CER 10% C116 .O1MF AX CER. C117 1MF RD TANT. C118 270PF AX CER 10% C119 10MF RD TANT. C120 .O1MF AX CER. C121 1OMF RD TANT. C122 47MF AX ELECT. C123 100MF AX ELECT. C301 330PF AX CER. C302, C303 470PF AX CER 10% C304 ,C307 O.1UF AX CER.

R1-R3 4.7K OHM 1/4W CRRN. R4 10K OHM 1/4W CRBN. RS 100K OHM 1/4W CRBN. R6-R7,RO 4.7K OHM 1/4W CRBN. R10 1K OHM 1/4W CRBN. R12-R14 4.7K OHM 1/4W CRBN. R15,R16 10K OHM 1/4W CRBN. R17, R18 100 OHM 1/4W CRBN. R19-R21 10K OHM 1/4W CRBN.

=18-23

Page 56

SOUNDS GOOD A084-91863-B600 M051-00114-R151 (Page 2 of 5

DESIGNATION LIST

DESIGNATIGH DESCRIPTION

R22 100K OHM 1/4W CRBN. R23 10K OHM 1/4W CRBN. R24 100K “OHM 1/4W CREN. R25 100 OHM 1/4W CRBN. R26 47K OHM 1/4W CRBN. R101 12K OHM 1/4W CRBN. R102 160K OHM 1/4W CRBN. R103 100 OHM 1/44 CRBN. R104 330K OHM 1/4W CRBN. R105 24K GHM 1/4 CREN. R106 3.3K OHM 1/4W CRRN. RLO7 24K OHM 1/4W CRBN. R1nR 150K OHM 1/4W CRBN. R109 82K OHM 1/4W CRBN. R110 510K OHM 1/4W CRRN. R111,R112 120K CHM 1/4W CRBN. R113 33K OHM 1/4 CRBN. R114 330K OHM 1/4W CRBN. R115 150K OHM 1/4H CRBN. R116 33K OHM 1/4W CRBN. R117 18K OHM 1/4M CREN. R118 100K OHM 1/4W CRBN. R119 510K OHM 1/4W CRRN. R120 47K OHM 1/4W CRBN. R121 1K_OHM 1/4W CREN. R122 2.7K OHM 1/4 CRBN. R123,R124 360 OHM 1/4W CRBN. R125 180 OHM 1/4W CRBN. R126 2.7K OHM 1/4W CREN. R127 560K OHM 1/4W CRBN. R202 100 OHM 1/4W CRN.

D1,D3-D4 1N5817

01-03 2N5305

ul MC3340 U2, U3 LM359 us 68000G8 CPU U6 RAM 2K X 8 U7,U8 ROM/EPROM u9 6821 P.1.A. 10 AD7533JN DAC ULL 14584 /40106 ul2 74874 U13 74LS04

3-24 SOUNDS GoaD A084-91863-B000 M051-00114-B151 (Page 3 of 5)

DESIGNATION LIST

DESIGNATION DESCRIPTION

u14 T4F32 U15 SGOIRO PAL U16 PAM 2K X 8 U17 ,U18 ROM/EPROM

FB1,FB2 FERRITE BEAD FB101,FR102 FERRITE 8€AD FB301 FERRITE BEAD

ICS US 64 PIN IC SOCKET ICS U6 24 PIN IC SOCKET .AN0 ICS U7,U8 28 PIN IC SOCKET ICS U9 40 PIN IC SOCKET Ics U10 16 PIN IC SOCKET Ics U15 24 PIN IC SOCKET .390 IcS U16 24 PIN IC SOCKET .600 ICS U17,U18 2&8 PIN IC SOCKET

Ji AUTO INSERT PIN TIN .025 J2 AUTO INSERT PIN TIN .045 J3 AUTO INSERT PIN TIN .025

JW1-JW3 ZERO OHM RESISTOR

LED 1 GREEN LED

SWI SWITCH PC MTG.

Yl 16 MHZ XSTAL OSC. CROSS REFERENCE

DESCRIPTION

68 PF AX CER 10% 100 PF AX CER 150 PF AX CER 10% 270 PF AX CER 10% 330 PF AX CER 390 PF AX CER 470 PF AX CER 10% 680 PF AX CER 820 PF AX CER 5600 PF AX CER 10% .O1 MF AX CER

0.1 UF AX CER 1 MF RD TANT 10 MF AX TANT 10 MF RD TANT 47 MF AX ELECT 100 MF AX ELECT 100 OHM 1/4¥ CREM

180 OHM 1/4W CRBN 360 OHM 1/4W CRRN 1K OHM 1/4W CRBN 2.7K OHM 1/4W CRRN 3.3K OHM 1/4W CRBN 4.7K OHM 1/4W CRBN

10K OHM 1/4W CREAN

12K OHM 1/4W CRAN 18K OHM 1/4W CRBN 24K OHM 1/4W CRBN 33K OHM 1/4W CRBN 47K OHM 1/4W CRBN 82K OHM 1/4W CRBN 100K OHM 1/4W CRBN 120K OHM 1/4W CRRN 150K OHM 1/4W CRRN 160K OHM 1/4W CRBN 330K OHM 1/4W CRBN 510K OHM 1/4W CRBN 560K OHM 1/4 CRBN

1N5817

2N5305

Tae" SQUNDS GOND A084-91863-8000 051-00114-B151 (Page 4 of 5)

OTY.

= UE NEW Pe Nee

UNYNNNV AP

WRENN NH

~N

ENN ERMNEENNVE DESIGNATION

cing €3-C5,CA-C11 c1ll C113, C118 3a C1,C2,C101,C102 C112,C302,C303 C106 C6,C7 C115 104,C197,C110 C116,C120,CP1-CP7, cP9-CP13 (304 C307 ,CP101,cP102 €103,C108 ,C114,C117 cP14,cP1s €119,0121 105,122 CP16 C123 R17, P18, 225,R103, R2ne R125 R123, R124 R10,R121 R122 ,2126 R1N6 R1-P3,RA-R7 RO p12-R14 R4,P15,R1F,R19-R21, R23 R101 RL17 R105 ,R107 R113,R116 R25 R120 R109 RS ,R22,R24,R118 RILL,R112 R108 R115 R102 R104 ,R114 R110,R119 p127

D1,03-D4

Q1-03

U13 u14 PART NUMBER

0307-008N0-0011 0304-00800-0001 0307-00800-0010 307-0N8NN-0009 0300-00800- 1402 0986-00800-3000 0307-00800-0008 358-00800-0002 0304-00800-0002 0307-00800-0007 0986-00800-2200

986 -00809-0200 0307-09800-0004 0986-00800-0700 0307-00800-0005 0307-00800-0003 0307-00800-0006 10NE -90N05-0033

1QNE -0G0N5-0039 100£-00005-0048 10NE-09005~-0061 1N0E-00005-0071 190E-00N05-0074 100E-00005-0979

10NE -00005-0088

100E -00005-0090 100E -000NS-0093 100E -00005-0097 100€ -90005-0100 100£-99005-0104 100£ -00005-0112 100€ -00005-0115 100€ -00005-0118 100£ -00005-0120 1NOE -00005-012 10N£ -00005-0128 3 100€ -00005-0133 1NOF -00005-013!

103€ -00003-00094

036N-00802-0012g

0304-00803-0060, 0304-00803-005:

Page 57

CROSS REFERENCE SOUNDS GOOD A084-91863-B000 M051-00114-B151 (Page 5 of 5)

DESCRIPTIONQty.DESIGNATIONPART NUMBER
748741u120304-00803-0061
14584/401061U110304-00803-0056
6821 PIA1u90304-00803-0054
6800068 CPU1U50304-00803-0051
AD7533JN DAC1u100304-00803-0055
SGO1RO PAL1U1S0£36-00803-0009
LM3592U2,U30304-00803-0053
MC33401UL0358-00803-0002
RAM 2KX82U6 ,U160304-00803-0057
ROM/EPROM1U7
ROM/EPROM1usSEE ROM/EPROM
ROM/EPROM1U17CHART
ROM/EPROM1U18
FERRITE BEAD5FB1,FB2,F8101,FB102, 0316-00804-0002

FB301

16 PIN IC SOCKET1ICS U10110£-00001-0003
24 PIN IC SOCKET .3001ICS U15110£ -00001-0009
24 PIN IC SOCKET .6002ICS U6,U16110€ -00001-0007
28 PIN IC SOCKET4ICS U7,U8,U17,U18110E-00001-0010
40 PIN IC SOCKET1ICS U9110E-n0001-0011
64 PIN IC SOCKET1Tes U5110£-00001-0016
AUTO INSERT PIN8Jl0304-00804-0009

TIN .025 SQ

AUTO INSERT PINlL330304-00804-0009

TIN .025 SQ

AUTO INSERT PIN11J20304-00804-0010

TIN .045 SQ

ZERO OHM RES3JW1-JW3117E-00001-0003ayia

Hee

GREEN LED1LED 1119€-00001-0001See
SWITCH PC MTG1SW10986-00804-3100Lee,
16 MHZ XSTAL OSC1YL0304-00804-0008a8
PC BOARD1A080-91671-G000

6-13-86 Released for Production, CMM. 6-26-86 Rev. 1.0 CMM --Changed R101 from 24K to 12K.

Page 58

3-26

Page 59

‘SRDSELE ‘SHDSELL ae SRBSELE ‘SHDSELS Sect 4 oF 3 [nev

07599 voo veer ours oure wie J2 = 12 PIN KK108 ae as aoe Lipa ne na

ANALOG .0UT, {Pn 1 Key 39

«| AG BFR ay-ReTueN F]so 0

sale

30°88 ete | ie, Pat

z 826? ay SENSE Z 26-1 10 12K. cnt 1 2 RV_RETURN REV 1.8 6-26-86 R101 CHANGED TO 12K. CF

NOTES 7 BALLY RIDUAY AFG. CO.

6008 C. MEDNICK

a

ng pee 18 JUNE 66 sHEeT sof 5 [nev

3-27

Page 60

DESIGNATION LIST

"DESIGNATION NO.DESCRIPTION

c1,ce 4.7 MF 25V RD TANT

|€3,C422 MF 6V RD TANT

€5,C6 470 MF 6V AX ELEC c7-c10 <1 ME SOV AX CER

|crt220 MF 25V AX ELEC

cP2;,cP3 «1 MF SOV AX CER

|R1,R22.7K OHM 1/4 5%

CRBN RE, RG 27 OM 1/4W 5% | CRBN R5-R8 1 OHM 1/20 5% CRBN

iut ,u21837 50
\7]7 PIN
|Je5 PIN
byHSAT,2HEATSINK ASSY
:MH 1-THG1/4" SPACER

3-28 CROSS _REFERENCE LIST MCR/2

DUAL POWER AMP. PC.1ESIGNA.NUMBER
nosio ebro menDESCRIPTIONaryDESIGNATION NOPART_NUMBE
.1 ME SOV AX CER6C7-C10, cP2, CP30986-00809-1190
4.7 ME 25V RD TANT 2c1,¢20986-908U0- 3100
322 ME OV RD TANT2c3,C40986-00800-1690
220 MF 25V AX ELEC 1cet0986-00800-3200
2 ( )470 ME SV AX ELEC2€5,060986-008U9-1700

+

=é1 ont 1/20 5%4R5-RB0U62-02603-1Xxx
+8{27 OHM 1/4W 5%2R3,RG006 2-06883~1 XXX
2.7K OHM 1/4" 9%2R1,R20062-19983-1 XXX
11837502U1, 21066-188 XX-XX4x
TIN .045 Sa PINS12J1,s20017-90033-9489
HEATSINK ASSY2HSA1,2A986-90010-E090
1/4" SPACER4m1 ta9917-09042-0320
PC BOARDiAU80-909 19-7990

PROJECT ENG~>C.MEDNICK THIS DWG 1S CONFIDENTIAL & PROPERTY OF BALLY/MiOWAY MFG CO DIM. TOLERANCES sto ow TRON UNLESS OTHERWISE SPEC. Fan ae silly |miowa Y MFG. co.

CONCENTAICITY TLR. 002) 46/14/84 atFRANKLIN PARK. IL 60131
FRACTIONAL2 W64 craTaareREVISIONS
DECIMAL+ 005DUAL PWR AMPPART NO.

HOLE DIA. + .002— 000

ANGLEcoe. #2" feee tae TneASSEMBLY DRWNGMOS 1 -00986—FOI0

00 NOT SCALE DWG. A084 -90910-FO0O

Page 61

e

ONOBaRUD = N.C.

L. AUDIO L. SHIELD

key

VAUDIO RETURN

R. AUDIO

R. SHIELD V AUDIO

VAUOIO L. SHIELD

R

SHIELD

Vv AUDIO

Vv AUDIO RETURN

DIM. TOLERANCES Fest | TRON UNLESS OTHERWISE SPEC. faz CONCENTRICITY TLR. 002 | 97, 7 FRACTIONAL . a ie (000 vew (/2w =f clo ‘toe UF

’ > TO CHIPS cP2 ces So UF 25V lie ] UF PROJECT ENG: C.MEDNICK s= THIS OWG. IS CONFIDENTIAL & PROPERTY OF BALLY/MiDWaY MFG. CO. T silly /| MIDWAY mec.co. SRE 6/14/84 | Sti FRANKLIN PARK, tt 60131 REVISIONS +164 . 2.005 MECH Cre WaT DUAL POWER AMP SCHEMATIC PART NO. + U2* [ELEC Cow DO NOT SCALE OWG.

BRUNING: 40-107 iM. A080 — 90910— F000 MO5!1~00986-FOII

3-29

Page 62

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 63

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 64

3-32 PARTS LIST

Ji | at DESCRIPTION ary DESIGNATION PART NUMBER

_ 1OME 26 AX. TANT Co 2.7K OM 1/4W RESIS. 4 Pr TIP110 XSTR

Ra ce ¢1,02,03 098¢-00800-0700 R4,R2,R9,R4,R6,R6 100E-00006-0071 7 01,02,03 104€-00009-0001 c a2 AUTO INSERT PIN .026 8Q. a 0304-00804-0009

E 4 ‘SNAP RAW PCB 0017-00007-0134 A080-01877-AE68

a ecneon

b AG B c ca E + 4 Q3

PIN $ (© BALL row y J _ Rev. For Propuction jolie BP.

BALL MIDWAY MEG. CO 062" JS. LAMP CONTROL PC aaesery, oma. FR-400 | 10/01/86} Ad84-91877-AE68 | M051-00E68-A010

CONTROLS CONTROL2 CONTROL NOTES! C. MEDNICK 25 SEP 1986 POWER DRIVE LAMP PC 084-91877-AE6B meS1-00£68-Aa12 BALLY MIDWAY MFG. CO. SHEET 1 OF 1 [REV

Page 65

=

een Se ew nese FCC FILTER BOARD FOR MONOBOARD PART NO. A084-91870-A000 051-006 36-A161

DESIGNATION LIST

FCC FILTER 8D. FOR MONO @D oO O DESIGNATION NUMBER DESCRIPTION

_ ee EDCL - C3-O1 UF AX. CER.
,5FB1 - FB4FERRITE READ
|JlCONNECTOR 12 PIN KKI56 R/A
ib miCoaJ2HEADER 12 PIN KKI56 R/A OMIT PIN 5
Keyfrt—15JWL - JW2 -JUMPER WIRE

(Puss) ez} KEY 1 -KKI56 KEY FOR PIN 5 OF J1

  • BALLY MIDWAY vs i] A0Q80-91870-A000 CROSS REFERENCE LIST
DESCRIPTIONOoty.DESIGNATION NO.PART NOS.
01 UF AX. CER3Cl - €30360-00800-0005
FERRITE READ4FRL - FB40316-00804-0002
HEADER 12 PIN KK156 R/A1J2OF 36-00804-0002

OMIT PIN 5

CONNECTOR 12 PIN KK156 R/A 1JlOF 36-00804-0001
JUMPER WIRE2JW1 - JW2117£ -00001-0003
KK156 KEY1KEY 10017-90021-1353
P.C. BOARD1AQ80-91870-A000

8/13/86 - Released for Production - CHM 8/14/86 - Rev. 1 - corrected Jl, J2 designation reversed.

Silke | Releused Foe Motucti on REVISIONS PROJECT ENG: C. MEDNICK . useo on RAMPAGE

ASSEMBLY DRAWING FCC. FILTER FOR MONO BD. ( A084-91870-A000) DIM. TOLERANCES UNLESS SPECIFIED

SONcENTeCHTY Fem 005) FMRC TOM AL oo TE. wecimeac.... a wroteon | "¢ 002 00a ware B A2/BL o atts oo. 8 3G5 MOSI-OOE36-AIGO

3-33 eee

Page 66

to ee eee

ee ——_ = op

3-34 Je - 1a[

CABLE SIDE connon FBS FBI -— Ho u-u

{> m1 - 12

MTGH2 WTGH1 MONOBOARD SIDE

F/13

BALLY MIDWAY MFG. co.

FCC FILTER BOARD N@S1-88E36-A162 A884-9187D-Aeas

SHEET 1 OF 1 [REV A

Page 67

TO MONITOR TO CONTROL CONN. A

TO SOUND BOARD POWER CHASSIS a945-00859-8208 SDe. SDt spe $D3 TO TEST BRACKET

GROUND ED

CONDOR POWER SUPPLY

SHIFT 3)

RIGHT 3

TO COIN NOOR CONN. WHEELIE 3. STATUS. STROBE. -sv

  • v_RTN,
F12v_RTN! 2GRYFi12v_RT

H . Fievt ale neter TOGOIN DOOR CONN

St4nod
aBLU-oRN B24salajzlzela] |=]a]z|=|_zls
Tlac Hotg/slzleba Fe ed Pd FedFare
H6elaloloaia Gi} >] 91] >al
21N. U.SHiySRY-BLK___GROUNDmeleleTelalelalelels“a
3iac NEUT4GROUND=/E)|EClelel a alg ala|=
4tn.U.opedvetGROUND*E“Lmn_

SJE GROUND i

118Sle aoe2f2aag
GROUND! 11‘oaae:
GROUND! 12gaagZ
GROUND!13eet3
GROUND! 14wean GROUND-6 o

aJ6 \R

onetN TSH [aRED+5¥,igi TerounnFS5To now
‘@BLU-GRYA#REDife {srounnRED}GROUND,
@BRN-WHT AB OtREDtH3 145vGROUND ‘2
aunt N71We haeyGREENI3
p48!Ws lxeyGROUND! 4
a1BLUEIS

H 8 eev 7 KEV |? Hs hens HBLNK~!8

iB?iVBLNK~19

{pte GRounn tl Zz. Je

iSweMONO BOARDreac! 1g BRN-WHT

c - _ =

3GROUNDasiABB4-91787-CbABtpait 2 BRN-BLK
z1 1GROUNDpee! 38k BRN-YEL
foe2 (GROUND1pe3! aTILTJTQ COIN DOOR CONN.

3 +5¥ 1p84t s GRY t sper ___

4 (+5¥rpes! é 1TEST,
5 {KeyTroe} sHgORNCHATSERVICE]TO TEST BRacKE

& {RESET_OUT iport 6 z {ROUND GROUND! 9 @ t+i2y f ' IP1@118 etn IPittit 1er+sv IP12ii2

TO LAMP BOARD111GROUNDH

121GROUND ed ba

POURE BartowTo AUDIO AMP BOARD12}keviia

TO SOUND BOARD Cabot hee IPISH16 IP16117§a—tie . LINE VOLTAGE SELECTION CHART rei7it TO CONTROL CONN. A VOLTAGE , 105, 115 , 210; 220 ; 230 , 240 COLOR ROUNDS JUMPER 1| 5-6 | 5-11| 8-14]11-14| 11-14] 11-14] a0RN FILTER SuNPER 2[14-15|14-15| out | our | out | our avec To MONO BOARD JS sunper 3! 4-7 ' 4-10! 4-7 | 4-7 ' 4-10! 4-13!arep BALLAST —>

KONTTOR TO LAMP BOARD ORN-GRN ORN-BLU CONTROL, CONTROL CONTROL Trea 21GREEN 3 BLUE s J a a ySROUND TO POWER CHASSIS sivsviic onl REV. 1 - SUPERCEDES ALL EARLER DRAWINGS JS}HSYHC AC IN =O WOTES? E ac INt2 R. A. PLOUSSARD NOV 04 1986 BALLY MIDWAY MFG. CO.

POWER DRIVE CABINET WIRING © 18AHG 300 a = 1eAUs seov N51-80368-Aee3

SHEET 1 OF 2 [REV

3-35

Page 68

3-36 TO_POWER SUPPLY

TO CONTROL CONN. B

TO MONO BOARD J4

F12V_RTN

GROUND TO POWER SUPPLY LAMP BOARD A@84-91877-AE6S 1 tesy 2 GROUND

SOUNDS GOOD BOARD AG84-91863-B000 YEL-BRN @ GROUND VoL pot uipeRti GROUND AUDIO OUTI2 STRAND SY AUDIO OUTIS (r3¥ @ crounni¢ Pf GROUND *YEL te1ev A GROUNDS ft trey aupro ouTi6s fi TE GROUND AUDIO OUTI7 H #12V *ORN tKeY A GRoUNDie ft RESET kevis ft i VoL POT alte ' ELK“HHT @ GROUNDI11Bt vou ror Bitzi ORM-BLK

RED-YEL

RED-BLU

RED-ORN

RED-GRN

TO MONO BOARD

Pare TO MONO BOARD J3

3 terounp BLK-HHT 4 IKey 7

CONTROL 3: poorYEL-BRNE
LIGHT 2GRY_RED ap caeHa
CONTROL 2ORN=BLUHORN-BLK I>
LIGHT 4GRY-GRN{CONTROL2race} TO SOUND BOARDH
CONTROL 1ORN-GRNicoltMe

10{CONTROL1 ~ m

TO MONO BOARD J2 GRY-RED rq I ( TO CONTROL CONN. A

ORN-WHT YEL-RED Li

TO POWER SUPPLY

DUAL POWER ANP Ji ags4-99916-Fee8 Tine 2iu AUDIO Sil SHIELD 4tKEY stv AUDIO RETURN Leia GIR AUDIO SPEAKER

SPEAKER

TO TEST BRACKET rok TO MONOBOARD J2 HHEELIE sonpeon a BLU-RED HHEELTE £ 41k o

SHIFT 1it BLU-YELsuit 1
LEFT 1BLU-GRNtee 1
RIGHT 1BLU-WHTRIT 1
WHEELIE 2GRN-REDiia 2

SHIFT 2@

SHIFT 2GRN-YELae4
LEFT 2GRN-UHTHe i
RIGHT 2@GRN-BLKRIS :

TO MONOBOARD J3 WHEELIE 3 WHT-RED MHEERTE 3

SHIFT 3HHT-BLUne 8 4
LEFT 3UHT~-GRNtee 3
RIGHT 3UHT-ORNaU a

TO COIN DOOR CONN. GROUND VEL

TO TEST BRACKET GROUND

TO LAMP BOARDLIGHT 1 CONTROL Beey-GRNwt 1

‘

LigHT 2IoGRY-ReDeT

see O—O—-4 te LIGHT 3

LIGHT 343% GRY<C)0) 4

TO COIN DOOR CONN. tot +1eV tot ORN-BLK a4f COIN DOOR LIGHTS

TO CONTROL CONN. B+1evC

POW!

TO POWER SUPPLY+12VCOIN DOOR en-BLK| ©|

GROUND GRY-BLK

COIN METER

TO MONO BOARD J3METERWHT-YEL

<a} +R

+S¥ WHT

TO MONO BOARD JeCOIN 1BRN-HHTcow 1
COIN 2BRN-BLKoN i 4

COIN 3 BRN-YEL OM id

TILTGRYaN

GROUND YEL

TO CONTROL CONN. A GROUND

NOTES?

R.A. PLOUSSARD NOV @4 1986 Notes: *® = 18 ANG 360¥ BALLY MIDWAY MFG.

POWER DRIVE CABINET HIRING

N@51-2368-Aee3 co.

SHEET 2 OF 2 [REV