CATHODE RAY TOMES

Centipede DP-182-5th-02B

Centipede (revision 4) (Atari, 1980) · Drawing Package · 1 pages · original scan

Page 1
Scan of page 1

Joystick Circuitry

if

se sar O 221 com ©

Option Input Circuitry

aTeeeeaEREE!

Testing the Option Switches

  • Perform the CAT Box preliminary setup.
  • Set the CAT Box switches as follows:

‘. DBUS SOURCE to DATA

b. BYTES to1 ©. ROW to READ 4d. Key in address 0800 (N9) or 0801 (NB) ‘8. FIW MODE to STATIC

  • Activate the switch while monitoring the DATA DISPLAY. The DATA DISPLAY will change i the switch Is operating properly. ‘TolFrom MPU Data Bus Sheet 1, Side 8

Player Input Circuitry

Testing the Player Inputs

  • Perform the CAT Box Preliminary Set-up.
  • Set the CAT Box switches as follows:

b. BYTES to1 ©. RAW to READ

  • Key in address 0600 (self-test switch ‘nly oF 0001 all others) @. PAW MODE to STATIC
  • Activate the following player input switch. 5, one at a time, while monitoring the DATA DISPLAY: a. Coin Right ’. Coin Let ©. SLAM
  • FIRE @. START 1
  • START 2 4, The DATA DISPLAY will change it the ‘witches are operating propery.

From MPU Address Bus Sheet 1, Side B Coin Counter Output Circuitry <— Denotes lest point

‘The video output circuit receives motion object, playield,ad- ‘dress and data inputs and produces a video output to be displayed on the game monitor. In order to read out of the color

Coin Counter Output Circuit

This circuit consists of coin counter drivers 06, Q7, and Q8 and data latch M10. The circuit is addressed by the MPU on ABO-AB2 and written byt ‘on data line DB7. When the input to a driver is clocked high, its collector goes Tow grounding the return of the coin counter in the coin door.

Centipede”

Player Input Circ! Video Output Circuitry Audio Output Circuitry Coin Counter Output Circt

High Score Memory Circuitry

Section of 037241-01_ H y

wet Aa

aa pia St pining Centipede RAM, GRYO and GRY1 trom the motion object cicultry are mul: tiplexed with AREAO and AREA from the playfield circuit by EB. ‘The output, selected by GRYO or GRY1, is RAMAO-RAMAS (RAM ADDRESS),

RAMAO-RAMAS are applied to color RAM C8. The colors red, ‘green, blue and an alternate color bit are outputs. The three col fr bits are latched by AB as the game video in the three basic ‘colors (or shades of gray in a black and white moniton. When the altemate color bit (C8 pin 11) is active, an alternate shade of blue or green is available.

The following conditions, along with the various. combina: tions of COLOR 1 (red), COLOR 2 (green) and COLOR 3 (blu provide 6 extra colors fora total of 14,

  • 118 pin 11 is low, transistor Q5 conducts and draws current trom COLOR 3. The results a pale blue when COLOR and COLOR 2 are off.
  • IAB pin 10s low, transistor Q4 conducts and draws cur rent from COLOR 2. The result is a pale green when COL. ‘OR 1 and COLOR 3 are off MPU 7 Testing the Audio Outputs

Perform the CAT Box preliminary setup.

Set the CAT Box switches as follows: Audio Output Circuitry

  • DBUS SOURCE to DATA
  • BYTES tot ©: AW to WRITE
  • Rey n address or press ADDRESS INCR ©: Bross OATA SET t Koy in data 6: Set RAW MODE to PULSE, then to OFF. (= Staring at Step & @Q~0o ADDRESS DATA RESULTS TofFrom MPU ‘or sheet, Side 8 ior h woo 88 foo! ——AF_—_Pure tone is heard from channel 1 output 400100, Channelt output Is tumed of, jz 88
1000APPuro toneis heard from channel 2output
400300Channel 2 outputs tuned of,

1004 58 7 4005 AF_—_Pure tong is heard from channel 3 output I

400800Channel 3 output Is tuned of

fos 88

007APPure tone is heard from channel 4 output
$00700Channel 4 output Is tuned of,

Bt

cae fe we lem bu S ceons—@) coon (ise)

Mini-Trak Ball™ Circuitry High Score Memory Circuitry

The High Score Memory circuit stores the three best scores and other pertinent information. These scores are saved even if power is removed from the game. The High Score Mem: ory circuit consists of an erasable reprogram: mable ROM E5, latches E4, H4, J4, buffer HS and timer Att

; }

ro

fy Att produces a 0-15V square wave at a 1V rate. This signal, when + 15V, forward biases diode CRS and allows capacitor C86 to charge to ~29V. When the signal is OV, CRS is cutoff ‘and CRS is forward: biased which causes C84 to develop a charge. C84 charges to approxi ‘mately ~ 28V. This is the potential required for EAROM CO to operate.

‘The MPU addresses the EAROM (ABO:ABS) when a low EAADDR gates WRITE? at gato Ad, ‘The tralling edge of the gated pulse latches the ‘mer Bp

avenr ec(} address information to the EAROM E5 via J4. Data is latched by H4 at the same time. The EAROM mode (read, write or erase) is deter ‘mined by DB0-DB3 at latch E4. A low EACON- TROL gates WRITE? at gate Ad. The trailing ‘edge of this gated pulse latches the data into the EAROM ES via latch Ha Testing the Mini-Trak Ball™ Inputs

  • Perform the CAT Box Preliminary Setup. Data is read from the EAROM when ‘on pin 1 of butfer Hé goes iow.
  • Set the CAT Box switches as follows: a. DBUS SOURCE to DATA b. BYTES tot . RWW to READ 4d. Key in address 0600 (vertical) or 0002 (horizontal) . RIW MODE to PULSE
  • Spin the MiniTrak Ball™ while monitoring the DATA DIS- PLAY. The DATA DISPLAY will change if the MiniTrak Ball input is operating propery From MPU Address Bus Sheet 1, Sido B