CATHODE RAY TOMES

Lord of Gun

Lord of Gun (World) (IGS, 1994) · Manual · 29 pages · 10 sections · original scan

Page 1

Lora of Gun

USER’S MANUAL

igs INTERNATIONAL GAMES SYSTEM CO, LTD.

Page 2

Tabel of Contents

I.Parts List And Installation ............-....:0ee 1 LParts List «:::secseeseeeseeeceeeeeceeceneeeeee eee aeeteeereeseeee nee ened DAmstallation «++ +eeceeeeecee eee ceecee cesses cesses seeeeeseeeeeaeeeeseee ees 4 IL.Setup And Testing ........--.: cece 7 1.Setup 2.Testing - ste eee eee tte desea eeee ee ereaeeeenees see eer ter ere |G Hi. Introduction to Game pee eveyone eeedeauveses sueiies duane 6 LExplanation of Weapons s1+++sseses siete serteeeeee cee eee eee 16 2.Explanation of Roles se++essissessesseeceseteee cee cee cee eeeeeeees 6 3.Explanation of Scenes «1++++sersseeeeesee eee eeeenerenen tee cneens V7 A.Game Instructions -++ssesssesseeeeeesseeeceesee senses enseeeeeeaee 7 Appendix 1. Specification of Main Unit(1) -- 18 Appendix 2. Specification of Main Unit(2) -++-+++++sessreser ee 19 Appendix 3. Specification Of Gumiess+++ss+eersreser eee seeeeeeeenee 20 Appendix 4. Internal Wiring of Main Uint +++ +++ ++e+1es++eeeee 21 Appendix 5. Wiring Circuit Diagram +++++++++ ++ sereeeeee eee ee 22 Appendix 6. Cable Pin Assignments of Main Board ---------23 Appendix 7. Installation of Main Board -++++++++++esrereeeeees Appendix 8. Installation of adhensive paper ++++++++++++++ee+++

IGS is a trademark of International Games System CO., LTD. Lord of Gun is a trademark of IGS CO., LTD.

Page 3

LU UF WU SO SHRP TO

I.Parts List And Installation

1.Parts List (1)Parts List of Main Unit The parts on the front of the main unit are shown in FIG.1. The internal components of the main unit are shown in FIG.2.

Upper Panel >> [ Power Switch ve

Speak = Fluorescent Light Peaer = =. ~~~ Speaker

\ XQ N eno Glass ny | Gun Holster 1 \ > _ Gun Holster 2 o P

Gun of Player 1 ——~ / —_ Gun of Player 2

~ Start Button 2 Start Button 1

Coin Selector

~~ Coin Box

FIG-1 Front View of Main Unit

Page 4

LU UF UUIN

Mirror

a Back Cabinet “ Monitor NY

Power Safeguard Switch-—._

  • Main Board Connection Cables

Plug -

  • Main Board

Isolation Trans at oranon former Main Board Base

Voltage Selector Switch ~ :

Power

Supply FIG-2 Interior of Main Unit

NOTE:Before turning the unit on, check whether the power voltage used is HOV or 220V. And set the voltage selector switch on the power supply to the proper position, as indicated in FIG.3.
Page 5

LU Ui WU

(2)Parts List of Kits As indicated in FIG.4, one set of kits include one main board,two guns with cables connected to the butt, two gun positioner blocks and screws, two gun holsters and fastening screws, and eleven sheets of

adhesive paper.

Main Board (1)

11 PCS of Adhesive Paper

Positioner Block & Screws B & 7x8

Txs

FIG-4 Parts List of Kits

Page 6

LU Ur GUN

2.Installation (1)Exterior of Main Unit Position panels NO.4 and .5 onto the upper and lower portions, respectively, of the main unit, as indicated in FIG.S

FIG-5 Attaching The Adhesive Paper Sheets

Attach the adhesive paper sheets NO. 1, NO. 2, and NO.3 (two sheets per number) to the left and right sides of the main unit, exactly as indicated in FIG.5, The excess can be trimmed with a scissors or knife. as shown in FIG.6. Then attach the NO.6 over NO.1 as shown

in FIG 6.

FIG-6 Trimming Excess

Page 7

LUG Ul UUW

(2\Installation of Gun Holster And Gun Mount the gun holster onto the holster panel. as indicated in FIG.7. Insert the connection chain of the gun cable through the hole on the front panel of the main unit and fasten the connection chain to the main unit with the positioner block, as indicated in FIG.8.

FIG-7 Installation of Gun Holster

FIG-8 Installation of Gun

Page 8

Ll Ul WU

(3)Installation of Main Board Place the main board onto the main board base and connect the wiring cables (JAMMA wiring cables) to the sockets on the main board. Then, conncet the gun cable plugs for player | and player 2 into the respective sockets, as shown in FIG. 9.and FIG.10.Also refer to FIG.13. As an additional reminder, be sure to check power voltage you used is 110V or 220V before powering on the unit.

FIG-10 Position of Main Board

Page 9

Lui Ul UU

Il.Setup And Testing 1.Setup (1)Switching on The Power The power switch is located in the recess at the upper right side of the unit. Before power on the unit, verify whether power voltage is HOV or 220V.And be sure that the power safeguard switch is at the " ON" position,as indicated in FIG.11. If all procedures were conducted correctly and it is impossible to turn the unit on, there may be a problem with the internal wiring. Please contact your distributor for more information.

Power Switch

|. ~~ Power Safeguard Switch

FIG-11 Power on ON @ OFF ON

(2)Entering The Testing Mode After switching on the power, press the test button(see FIG.I3 )on the main board. The system will enter the testing mode. and the test menu wil! appear on the screen, as shown in FIG.12.

VOICE TEST MUSIC TEST GUN TEST SETUP WHITE SCREEN TEST GAME MODE

FIG-12 Test Menu

Page 10

LUT UF GUY

Test Button Gun Socket of player1 — Gun Socket of player 2

FIG-13 Top-View of The Main Board

(3)Screen Degaussing Select the "WHITE SCREEN TEST" option and the full screen becomes completely white. At this time. the degaussing device should be moved around over the screen and quickly left the display. This degaussing routine should be repeated until the screen is pure white, as indicated in FIG.14 . Press a gun trigger again and the system will return to the test menu display.

Lord of Gun

FIG-14 Screen Degaussing

Page 11

rN RES PR A

(4)System Setup Select the "SET UP" option to enter the system setup mode and the system setup menu will be displayed on the screen, as illustrated in

FIG.IS.

SYSTEM SETUP CREDIT OPTION COMMON

:COIN 12 COINS2 CREDITS
COIN 23 COINS4 CREDITS

CREDITS FOR PLAY.CONT 2.1 LIFE 1 CREDIT 10 LIVES

EXTRA LIFE1AT1500

2AT 3500

DIFFICULTY 3

VOLUME 8 CONTINUATION YES DEFAULT GUN NORMAL GUN DEMO VOICE ON SCORE PER HIT 8 MIRROR YES FACTORY SETTING DIP | SAVE AND EXIT | ABORT 0001

FIG-15 System Setup Menu

Move the cursor by pressing start key lor 2, and pressing a gun trigger to alter the parameter indicated. The parameters are described as

follows:

<1) COIN Used to set how many credits allowed for a certain number of

coins inserted. For example,"2 COINS 3 CREDITS" means that inserting 2 coins allows 3 credits. The "FREE PLAY" option enables game playing without inserting any coin.

  • LIFE Used to set up the number of lives per credit. The default value

is ten lives.

Page 12
  • EXTRA LIFE Used to set up whether additional lives are awarded to players and, if so, how many. When items | and 2 are set to "NO"s. That means "EXTRA LIFE" is disallowed. However, when the screen shows "1 AT 1500" and" 2 AT 3500" This means that one extra life is awarded if the player’s score is more than 1500. Should the player’s score later increase to more than 3500, then another extra life is awarded. <4) DIFFICULTY Used to set up the level of difficulty during games. The selectable range is 1 to 5, with 1 being the easiest level and 5 the most difficult. The default is 3. <5) VOLUME Used to increase or decrease voice volume. The selectable range is 5 to 8, with 5 being the softest and 8 the loudest. The default is 8. ¢ 6) CONTINUATION "ON" indicates that game continuation option is enabled and " OFF" indicates disabled. <7) DEFAULT GUN The following types of guns can be selected as the default gun:

NORMAL GUN : Standard Pistol MACHING GUN : Machine Gun

SHOTGUN : Shotgun BAZOOKA : Bazooka The factory setting of the system is a standard pistol("NOR- MAL GUN"), ¢ 8) DEMO VOICE When no coin is inserted. the system automatically goes into the demonstration mode. This item provides the option of turning the demonstration voice "ON" or "OFF." The factory setting for the system is "ON." LUAU Ur GUN

Page 13

Lun Ui WU a TTP PS cn

<9) SCORE PER HIT Players are awarded points each time an enemy, beast or weapon is hit. This item gives the number of points scored per hit. The selectable values range from 1 to 32 points. The factory setting for the system is 8. (10 ) MIRROR "YES" means you have a mirror in main unit to reflect the screen. And, "NO" means you use the screen directly to show images. Factory setting is "YES."

Note : If the mirror you use is too thick, because of the reflection, there may be a problem that the images will look foggy.

< 11) FACTORY SETTING Selecting this item, the values of the nine items mentioned above are set as present at the factory. «12 SAVE AND EXIT Selecting this item saves the settings you made in item <I> to <9> into the internal memory of the system. Next time it is turned on, the system will be configured by these parameters saved. ¢13 ) ABORT Selecting this item indicates that you want to disregard the current setup values and the system remains the previous paramaters.

W

Page 14

LUT UF WU Teel

(5)DIP Switch Setup The Dual In-Line Pin Switch (shown in FIG.13) has four discrete switches. The function of each switch is shown in FIG.16, and the

details are described as follows:

<1) Game Mode This game has two different selectable modes: "Archade Mode"

and "Street Mode."

In "Archade Mode." players could play this game by entering wach woiie iia pie-detined order. In "Street Mode", this game now presents 10 selectable scenes for players, not 4 any more. After all scenes are passed except training courses, players can enter the last scene, the head-

quarters.

<2) Selection of Guns You can choose whether to use guns of IGS or KONAMI. The

system is factory preset to guns of IGS.

«3 > Ranking Background Select the ranking background to be an exciting image or a tender one. The system is preset to show an exciting image at the factory. DIP SW SETTING

DIP SW 1 2 3 4 Archade Mode | OFF Game Mode Street Mode ON FF Selection of Guns cs ° KONAMI ON

Exciti FF Ranking Background xemng i

  • Tender ON S @ OFF Coin Selector —_ Common ON

KONAMI is a trademark of KONAMI CO., LTD. IGS is a trademark of International Games System CO., LTD.

FIG-16 DIP Sw. Setting

Page 15

LUD Ur WU A ASRS A TP IE a

< 4) Coin Selector

This game offers 3 different coin functions, I.E. 2 separate credit pools for 2 coin selectors, a common credit pool for 2 coin selectors, and a common credit pool for a single coin selector. These functions are depicted as following :

  • 2 SEPARATE CREDIT POOLS FOR 2 COIN SELE- CTORS

Coins inserted into each coin selector will be accumulated to in-

crease the respective credit pool. Pin 4 of dip SW. should be turned off to choose 2 coin selectors and "CREDIT OPTION" in system setup should be set as " SEPARATE," Please refer to FIG.IS system setup menu.

  • ACOMMON CREDIT POOL FOR 2 COIN SELECTORS

Coins inserted into both coin selectors will be accumulated to increase the common credit pool. This function supports you to allow a discount for players by assigning different credit/coin | values for these 2 coin selectors. For example, you can have "2 | COINS 1 CREDIT" for one coin selector and "3 COINS 2 | CREDITS" for the other. Pin 4 of dip SW. should be turned off ; to choose 2 coin selectors and "CREDIT OPTION" in system setup should be set as "COMMON"

  • A COMMON CREDIT POOL FOR A SINGLE COIN SELECTOR

Coins inserted into the coin selector will be accumulated to in-

crease the common credit pool. Pin 4 of dip SW should be turned on to choose | coin selector and "CREDIT OPTION" in system setup should be set as " COMMON"

You can also decide how many credits spent for playing this game one time and how many to continue by setting the values

Page 16

LUAU Ur GUN a

in the "CREDITS FOR PLAY. CONT" item. The selectable range is from 1/1 to 4/4. This function allows you to permit discount for continuation. For example, you can set up values as following: "COIN OPTION COMMON," "COIN1 2COINS 2 CREDITS," "COIN2 3COINS 4CREDITS," and "CREDITS FOR PLAY CONT 2.1." then you permit discounts for both coin and continuation.

(6)System Global Volume Control The global volume control knob on the main board (as indicated in FIG.13) is used for adjusting the overall sound level of the system.

2.Testing After powering on the unit. press the testing button on the main board to enable the system to enter the test mode and display the test menu. Then, use start key 1 or 2 to move the cursor among the items, and select an item by pressing a gun trigger.

(1)WOICE TEST Selecting "VOICE TEST" evokes the display of the voice test menu. Following this,start key 1 or 2 is used to change the voice number that determines the kind of sound to be produced by the system when a gun trigger is pulled. Pressing start key 1 and 2 simutaneously will exit the voice test mode.

(2)MUSIC TEST Selecting "MUSIC TEST" evokes the display of the music test menu. Following this, start key 1 or 2 is used to change the music number that determines the kind of music to be played by the system when a gun trigger is pulled. Pressing start key 1 and 2 simutaneously will exit the music test mode.

Page 17

LU Ul WU EET LTT STE PE TEL EP

(3)GUN TEST Selecting "GUN TEST" evokes the function of testing guns. Following this, the screen will be covered by 56 blocks, as illustrated in FIG.

  • First we could test the gun of player 1 by shooting these blocks. Once a block is detected to be shot. it disappear immediately. When all blocks disappear, or start key 1 or 2 (but not simutaneously) is pressed, the system will switch to the gun test of player 2. Similarly, we use the gun of player 2 to shoot blocks until all blocks are deleted. Or, press start key 1 and/or 2 to exit the gun test mode. If some of the blocks can not be deleted(especially the outer ones), this indicated incomplete degaussing. Repeat the degaussing routine and try the gun test again. After a number of screen degaussing procedures, if all or portions of the blocks remain on screen during the gun test despite attempts to delete them. There may be some problems with the gun triggers or the main board. You should contact your distributor for more infor-

mation.

i |

: FIG-17 Gun Test Screen

(4)WHITE SCREEN TEST After selecting "WHITE SCREEN TEST" the whole screen should be completely white. To pull a gun trigger again will return to the test

menu.

(5)GAME MODE Selecting "GAME MODE" will force the system to enter into playing mode of main game.

Page 18

Lun Ur GUiv

Ill. Introduction to Game 1.Explanation of Weapons In addition to the weapon type set by system(standart pistol, normally), players can choose special weapons in some stages of the game by shooting them. This game provides four different types of weapons, which are explained as follows: (1)Normal Gun: 10 bullets, single shot-point. (2)Machine Gun: 20 bullets, automatic firing and single shot-point. (3)Shotgun: 8 bullets, multiple shot-points. (4)Bazooka: 5 bullets, wide-area coverage and penetration power. Only the default weapon can be reloaded.

2.Explanation of Roles This game provides more than 1,000 different presons and beasts that play six unidentical roles which are explained as follows: (1)Beast: Points awarded after being hit. (2)Enemy: Points awarded affer being hit. (3)Hostage: When a hostage is shot, there will be a red "X" appearing on screen. That means the player loses one life point. (4)Cute Animal: When a cute animal is shot, there will be a red "X" appearing on screen. That means the player loses one life point. (5)Partner: When a parther is shot, there will be a red "X" appearing on screen. That means the player loses one life point.

Page 19

Lun UF UUIN

(6)Chief: Points are awarded after being hit. But each chief has a powerful weapon and strong life powers. He must be shot several times to be

killed.

3.Explanation of Scenes ; This game provides 11 scenes, including forests, swamps, snow-covered ground, cities, deserts, highways, beaches, air battles, indoor battles and training courses, etc. Besides the training courses, each stage ts sperated into three or four stages and there are one to four chiefs in each scene. Training courses are divided into five stages: human-figure targets, round targets, light bulb targets, aircraft targets, and flying saucer targets.

4.Game Instructions Beasts and enemies should be fired on during the game, but hostages and cute animals can not be shot to avoid the loss of life points. When out of bullets, an image will appear on the screen about reloading. At this time, the gun should be pointed at the middle of the front panel where shows the "Reload Shoot Here" message and press the gun trigger to complete reloading operation as indicated in FIG. 18. The player passes a scene by eliminating all of the beasts, enemies and chiefs in that scene. After all the scenes are passed, the screen will show the cast and the game will restart.

FIG-18 Reload

Page 20

LUD UF UUIN

APPENDIX-1 Specification of Main Unit (1)

+0 682-1 i R30 | eet 4 |

682-1

<= & < at | 2 8 _ ~ 682 s 1 X} A 8/2

gi

i 3 R30 | 80

Page 21

Lui Ui Ui’

APPENDIX-2 Specification of Main Unit(2)

R30 R50 684 R30

R40 R400_//

1600 1200 1820 F |

(969) R20

i 3 R30 | 80

Page 22

| lo \ f =f

is | R10 R16 >

+ =

8zh \/ Ri4 cai cap

158.3 185 7 (46.82)

RI

APPENDIX-3 Specification of Gun

LUA Ur UUil

Page 23

ne LUA Ur UU

APPENDIX-4 Internal Wiring of Main Unit

= s FLUORECENT. I LIGHT S.P. POWER SWITCH ——>

ACHOV

O

T 47 POWER SAFEGUARD SWITCH

\ START 2. / START I. ,

COIN 1, —}— TO COIN 2. ——ry MONITOR TT

g *_ acuov Pes ae POWER SUPPLY

ai

Page 24

LUAU UF

APPENDIX-5 Wiring Circuit Diagram

mas se

Note Sent Side

a

F co

E—Jor0

40.ooF‘sv

7 sy

ow oy row sur —— r

vwQww

40 Fr con cous G

lL>fgcom cover
.7sence

Tse

:

fr

mofy#0

veen Jerre

cotor owtorma:=oe

sinc Joc

Hor=\W0r0 G4

7 |

eenvessagconeascoee.
a.ryrst

¥ “4s

iz cont FJ] conz |

|7esa|

| eT] srs

i

re vesvt Fr

|rs Se=
moses awna&
'ssTE TRGGERLas
|Teez

iv

row

2PM kid

rc sin808Tee,F

1 PCC a mag sw fz

Rogfono
aqwiesono

z xo

oxo

‘rato R ‘Pimocee pve

raat Feo NS FD | are

Note : Speakers should be connected serially to Speaker (+) and

Speaker (-). It must be avoided to connect speakers parallelly

or to connect speakers to speaker(+) and GND, to kecp the

amplifier from being damaged or malfunctioning.

Page 25

Luh Ul WUIN

APPENDIX-6 Cable Pin Assignments of Main Board

SOLDER SIDE _[NO. [PARTS SIDE _ |

GNDA[1GND
GNDB | 2GND
+5Vc[3$5V
$5VDp | 415V
+12VF | 6+12V

H | 7

}_|8|COIN COUNTER]
kK[9|

SPEAKER (-) | L | 10 | SPEAKER (+) | M [i VIDEO GREEN | N_| 12 | VIDEORED VIDEO SYNC. | P| 13 | VIDEO BLUE R_| 14 | VIDEOGND. | s | 15 | TESTSW. 2PCOINSW. | T | 16 | 1PCOINSW. 2PSTART | U_| 17 | IPSTART v_ | 18

wfio|:
x_[20|

Y | 21 z | 2 a 23 b | 24 c 25 d_ | 2 -

GNDe[27 |GND___|
[GNDf_ | 28GND
Note : Speakers should be connected serially to Speaker (+) and Speaker (-). It must be avoided to connect speakers parallelly or to connect speakers to speaker(+) and GND, to kecp the amplifier from being damaged or malfunctioning. It is advised to adjust the power supply to output about 5.1~ 5.2V for the "+5V" pin of the cables.

ne

Page 26

LUAU UF GUN

| APPENDIX-7 Installation of Main Board

1.Loose and take down the nut and the washer as FIG.1

FIG.1 | |

ro

2.Lock the pcb holder as FIG.2

U5.

FIG.2

3.The completed set is shown in FIG.3

FIG.3

Page 27

LU Ur UUiIN Lene cee nn

APPENDIX-8 Installation of adhensive paper

1.Evenly spread the attached 3M glue to the cabinet as FIG.1 and FIG.2

FIG.1 FIG.2

2.Wait for 30 to 60 seconds then paste the adhensive paper to the

cabinet as FIG.3

FIG.3

3.It takes 2 to 3 hours to dry completely

Note : For using our guns, the adhensive paper must be attached. If not, our company is not responsible for all the copy-right problems.
Page 28

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 29

: Lord of Gan

® INTERNATIONAL GAMES SYSTEM CO., LTD.