Donkey Kong JR Operation Manual ( DJR1-18T)
Donkey Kong Junior (US set F-2) (Nintendo of America, 1982) · Manual · 24 pages · 8 sections · original scan
OPERATION MANUAL
_ MODEL NO:DJR1-18T
2P.C.BOARDS TYPE
Nintendo
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the inst-
ructions manual, may cause interference to radio communications.
As temporarily permitted by regulation it has not been tested
‘for compliance with the limits for Class A computing devices
pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference. Operation of this equipment in a residential area is likely to
cause interference in which case the user at his own expense will
be required to take whatever measures may be required to correct
the interference.
CONTENTS
SPECIFICATIONS
INSTALLATION OF THE MACHINE
{1} Cautions on installation
- Adjustment of table height
- Earthing of machine
POINTS AND METHODS OF ADJUSTMENT
- CPU P.C. Board
- Video P.C, Board
- Video Monitor
WIRING AND CONNECTION
NAME OF EACH PART
- Body
- Control Box
PARTS LIST
CAUTIONS
P.C. Board should not be exposed direct to the sun. Direct sunshine is very harmful to LSI(memory element).
P.C. Board to be stored or transported should be wrapped by a conductive pouch or alminum foil, because LSI and IC used in the machine are semiconductor integrated circuits of which basic element is MOS-FET.
When images on the Video Monitor screen are disturbed by powerful noise or other electrical causes, turn the main power off once and then on again.
-i1ie-
1. SPECIFICATIONS
{1) Power Consumption
- Size
- Weight
{4) Number of Player
- Number of Junior
- Accessories
without notice. 91 WwW
860(W) x 560(D) x §80(H)mm, Height :Adjustable 580,610,6 670, 700,7 Depth :Based on the size of table glass.
62 Kgs.
lor 2 person(s)
3 ~ 6 (Adjustable)
Operation Manual : Key for Cash Box : Bolt(M8 x 15) with washer:
Fuse : 100-120V: 5A x 1, 4A x 2, 200-240V: 4A x 2, 3A x Ty Key for Table Lock : 40, 30mm,
1 copy
2 pes.
2 pes.
4 pes. 0.3A x 1 O.3A x1
2 pes.
- INSTALLATION OF THE MACHINE
- Cautions on installation
1 The power cord of the machine should not be connected to a wall outlet together with large load unit(s) such as motor, cooler, ete.
rey Turn the power off before setting and removing the P.C. Board and connectors. Carefully handle them.
- Do not touch IC, LSI and other electronic parts on PC, Boards. Do not use a iester or the like on them. (They may be damaged by the inner voltage of the instruments.)
4 When exchanging a fuse, use a new one of the prescribed capacity.
5 The machine should be installed where it is not hot, keeping away from a heating appliance and direct sunshine.
6 The machine should be installed where it is not wet and dusty
7 Do not touch the inside of the video monitor which has high tension units. Inform service station, if necessary,
- Adjustment of table height
M8 Bolt J (Width across flat is 12 mm.)
- Earthing of machine
1 When the machine is installed in a wet place, it should be grounded to avoid accident by an electric shock.
- Connect an earthing wire to the earthing terminal of the machine.
- The opposite end of the earthing wire should be connected to an earthing bar which is firmly inserted into the ground.
2 Cautions
- Do not connect the earthing wire to a water pipe, because polyvinyl-chloride pipes are sometimes used in the water lines and, if so, the electronic continuity is cut at the points.
- Do not connect the earthing wire to the gas pipe absolutely. That is very dangerous.
~ $s
- POINTS AND METHODS OF ADJUSTMENT
- CPU P.C,Board
The number of Junior, score level, the number of coin and type of machine can be set with the switches on CPU P.C.Board according to the diagram below,
Number of Junior 3 OFF| OFF 4 ON | OFF 3 OFF| ON 5 ON | ON Score Level for extra Junior 10,000 points OFF | OFF 15,000 points ON | OFF 20,000 points OFF |ON 25,000 points ON JON
Coinage coin /1 play OFF | OFF /OFF coin /2 plays OFF/ON [OFF coin /3 plays OFF | OFF |ON coin /4 plays OFF/ON jon coins/1 play ON |OFF [OFF coins/1 play ON [ON [OFF coins/1 play ON | OFF |ON coins/1 play ON [oN |on RON eRe
Table / Upright Table OFF Upright ON
- Video P.C.Board
Semi-fixed resistors, VR1 and VR2 on Video P.C.Board are used to adjust video monitor screen. ja “ VR1 VR2
DJR1-VIDEO
VR 50K2 0.3W top type C) Turn right to move VR? 50K2 0.3W top type oY Turn right to move
1 white knob image downward.
white knob image leftward
- Video Monitor (18-22AB)
V-Size
V-Hold
H-Center Brightness Sound Volume
H-Hold
Fuse 4A (Slow Blow)
Fuse 0. 3A
WIRING AND CONNECTION 4.
OP Power Harcesal
Connector
white 1
et oma z acioby t
7 {
i veo fac foow ! red v ! ‘ORaREE i { Tres} |. rort — , ' en?| wv [E user i H
i a] ono |e ro lg Erste] cw |S own, \8 ' ow f2 ey G !
e Connecti el ce BrackeYy “SY |E 1g Be ! we mi ees TOP Power u i] sed Harness Connector _ B ! ae ¢ |
be] \ 1 le = SL ~ i = ie 7 SOEs iE ERE? ie o z BERR QEGS R= 5 (J § —— ee le = LOT {aP Power Harneas Connector . FORE © 3
f Tis ia 4 7 EK“ Gtype 25° Main Switch fs
a(R] Harness Connect cow : i ene eee tae wl t =| 2 | _iraver prow (etn brown ! 0 Hl = [Sus asnr 5 Oe 1 B i a lcimivee a H a 2% cpu | rc P.c.poarn | i ‘UB DOHA i i wancowi t+ 4
suse 4g 5 TAY JOM i na & VIDEO P.C.BOARD re |
eno fF ovo fi be ‘cho af saxvree[z ERNE a.5
gz ae pac JE f 2 A GRO, if
a + GND a H SOP Flat Cable iB aaa
gp Avon [7 é z 2 5 Es = 3] oe P18 Video
| | = 3 Harness Connecto
2 courte oP ableLy SOP Flat Cabt z x seh
GP Audie Harness brown FS Fa ep ox EL % [no BF Audio |
ea E a cou es kz (Remarks)
ids Mark (R) weans that
ee connector color is red,
- NAME OF EACH PART
- Body
82 15
- Control Box
These figures show main side. On the sub side, 2302, 23-06, 23-08 and 23-09 are not used and 23-07 is used in place of 23-06.
4 a asm B82 2328
23-22 23 20 Z Neg
23 09
23 08
23 02
23:04
23 06 23-14
23 04
B14 23-50 4 Way Control Lever Assy with Control Switch 2313
L ~
23-08
23 —10
6, PARTS LIST
- Body
—_ : ‘FOB Japan
| No. | Name of Parts | Q'ty} | Remarks | per pe. |
| DJR-8 1-02 | Cabinet (Upper) | 1 | ||
| DJR-81-03 | Cabinet (Lower) | | | ||
| DJR-8 1-04 | Joint Pole | 2 | ||
| DJR-81-05 | Leg | 2 | ||
| DJR-81-06 | Leg Adjuster | 4 | ||
| DJR-81-07 | Leg Connecting Pipe | 1 | ||
| DJR-81-09 | P.C. Board Frame | 1 |
(for Type 18) . .
| DJR-81-12 | Cash Box | 1 | |
| DJR-81-13 | Leg Cap | 2 | |
| DJR-81-21 | Game Counter Bracket | 1 | |
| DJR-01-09 | Game Counter | 1 | |
| DJR-81-28 | Service Switch Protecting | 1 | t |
Cover
| | DJR-81-31 | Service Switch Frame | 1 | ||||
| DJR-O1-22 | Service Switch | 1 | - | _ | 7 | | |
| DJR-81-35 | Video Monitor Bracket | 4 |
(for Type 18) \
| /DIR-8201 | | Table | | |
| DJIR-82-05 | | Table Glass (for Type 18) | 1 |
| DIR-82-06 | | Table Glass Retainer | 4 |
(for Type 18)
| DIR- 82-07 | Water Tight Packing 1000 | 3 |
(white)
| DJR-82-09 | Water Tight Packing 1000 | 2 |
(black)
| DJR-82-10 | Screen Frame (for Type 18) | 1 | 7 | ~] |
| DJR-82-13 | Table Stay (Upper) | 1 | ||
| DJR-82-14 | Hinge | 2 | ||
| DJR-82-15 | Hinge Stopper | 1 | ||
| DJR-82-16 | Fixing Metal for Screw | 2 | ||
| DJR-82-21 | Video Monitor Screen Filter | 1 | ||
| DJR-82-30 | Assy Lock Fitting (Upper) | 2 | ||
| DJR-83-01 | 308 Assy Main Control Box | 1 | ||
| DJR-83-02 | 308 Assy Sub Control Box | 1 | ||
| DJR-83-03 | Control Box Fixing Metal | 2 | ||
| DJR-84-01 | Video Monitor | 1 | 18-Z2AB | |
| DJR-88-01 | PT-881B Power Transformer | 1 | (100-120V) | J |
| No. | _ | Name of Parts | pe Remarks | ee |
| DJR-88-21 | PT- 882B Power Transformer | it | | 200-240V) | |
| DJR-89-01 | 44P Edge Harness Connector | 1 | ||
| DJR-89-02 | 2P Audio Harness Connector | | |
DJR-89-03 3P Counter Harness Connector — |
| DJR-89-04 | 4P Service Switch Harness | 1 |
Connector -
| DJR-89-05 | 4P Coin Harness Connector | rf | - | Oo |
| DJR-89-06 | 4P Double Coin Harness | 1 | *Double Coin Selectors |
DJR-89-07 6P-18 Video Harness Connector l
| DJR-89-08 | 9P Power Harness Connector | ] |
| DJR-89-11 | 10P Power Harness Connector | 1 |
| DJR-89-13 | 42 Type 15P Main Switch | 1 |
Harness Connector
| DIR-89-14 | 42 Type 15P Sub Switch | \ |
: Harness Connector
| DIR-01-03 | Coin Selector | 1 | |*Double Type : 2 pes. | ~ |
| DJR-01-05 | Cash Box Door Lock | ] | ||
| DIR-O1-1) | Coin Switch | | | |*Double Selectors Type | |
| DIR-04-12 | Speaker (TWG) | [1 | (2 pes.) | |
| DJR-06-00 | | Video P.C, Board | jo | (DJR1-Video) | |
| DJR-07-00 | | CPU P.C. Board | | 1 (DJRI-CPU) | ||
| DJR-18-01 | PP-7B Power P.C. Board | io | ||
| DJR-09-02 | Power Cord | 1 | ||
| DJR-09-04 | SOP Flat Cable | 1 | ||
| DJR-09-16 | 2P Speaker Harness Connector ; 1 | | |
DIR-23-01_ Control Box Housing (TWG) | 2 7 :
| DJR-23-02 | Player Switch Bracket | ; 1 | ||
| DIR-23-03 | Control Lever Knob | 2 | , | |
| DJR-23-04 | Vibration Proof Rubber | 2 | ||
| DJR-23-05 | Rubber Washer | 4 | j | |
| DJR-23-06 | Main Operation Panel | 1 | (028M) | |
| DJR-23-07 | Sub Operation Panel | 1 | (0288S) | |
| DJR-23-08 | 1-Player Switch | 1 | ||
| DJR-23-09 | 2-Player Switch | 1 | ||
| DJR-23-10 | Jump Switch | 2 | ||
| DIR-23-11 | Control Lever Assy Base | 2 | 7 | 4 |
| DIJR-23-12 | Switch Bracket | 2 | ||
| DJR-23-13 | Control Switch | 8 | ||
| DJR-23-14 | Blind Plate | 2 | ||
| DJR-23-16 | Bearing Bracket | 2 | ||
| DJR-23-17 | Switch Spacer | 8 |
| No. | Name of Parts | Q’ty | Remarks | eal |
| DJR-23-19 | Shaft | 2 | _ |
| DJR-23-20 | Spring Stopper | 2 | |
| DIJR-23-21 | Switch Collar | 2 | |
| DJR-23-22 | Lever Spring | 2 | |
| DJR-23-23 | E Ring 4 mm | 2 | |
| DJR-23-28 | Control Knob Pilate | 2 | |
| DJR-23-29 | Control Knob Collar | 2 | |
| DJR-23-50 | 4 Way Control Lever Assy | 2 | |
| DJR-23-51 | 4 Way Guide Plate | 2 | |
| DJR-89-09 | 12P Power Harness Connector | 1 | |
| DJR-01-06 | Table Lock | 2 |
-1l-
- VIDEO P.C.Board
FOB Japan
| No. | Name. of Parts | Qty | Remarks | oenpel |
| DIR-56-00 | VIDEO P.C. Board | I | Complete Set (TKG4-11-VIDEO) |
| "DIR-S6-01- | ICSN74LS00 | 2 | Quadruple 2-Input Positive NAND |
Gates
| DJR-S6-02 | IC SN 74LS02 | 3 | Quadruple 2-Input Positive Nor |
Gates
| DIR-56-03 | IC SN74L804 | : | 6 | Hex Inverters | : |
| DJR-56-04 | IC SN74LS08 | 1 | Quadruple 2-Input AND Gate | | |
| DJR-56-05 | IC SN74LS10 | 1 | Tri 3 Input NAND Gate | i |
| DJR-56-06 | IC SN74L820 | 4 | Dual 4-Input Positive NAND Gate | ||
| DJR-56-07 | IC SN74LS30 | ! | 8-Input Positive NAND Gate | |
| DJR-56-08 | IC SN74LS32 | 4 | Quadruple 2-Input Positive or Gate | |
| DIR-56-09 | ! IC SN74L874 | 4 | Dual D-Type Edge-Triggered Flip- | ||
| Flop w/Set and Reset | ' | : | ||
| DIR-56-10 | IC SN74L S86 | “7 1 Quadruple 2-Input Executive OR |
Gate
| DJR-56-11 | , IC SN74LS109 | 1 | Dual J-K Positive Edge-Triggered |
Flip-Flops with Preset and Clear i
| DIJR-56-12 | IC SN74LS 123 | 2 | Dual Retriggerable Single Shot | |
| DJR-56-13 | , Ic SN74LS 139 | i | Dual 2-to 4-Line Decoder/Demulti- |
plexer i
| DIR-56-14 | IC SN74LS157 | 14 | Quadruple 2-Line to !-Line Data |
| DIR-56-15 | | IC SN74LS161 | Synchronous Presettable 4-Bit Binary |
Counter w/Direct Reset
| [DIR-S616 | | | IC SN74LS163 | 7 | 2) | 4-Bit Binary Counter with Synchro- |
nous clear
| DJR-56-17 | IC SN74LS174 | 1 | Hex D-Type Flip-Flop w/Reset RAM |
| DJR-56-18 | IC SN74LS175 | 2 | Quadruple D-Type Flip-Flop w/Reset | |
| DJR-56-19 | IC-SN74L8 245 | 2 | Octal 3-State Bus Transceivers | |
| DJR-56-20 | IC SN74L8273 | 4 | Octal D-FFS | |
| DJR-56-21 | IC SN74LS283 | 8 | 4 Bit Binary Full Adder | |
| DJR-56-22 | IC SN74L8299 | 6 | 8 Bit Bidirectional Universal Shift/ |
Storage
| DJR-56-23 | 7 | IC SN74LS367 | 2 ! Hex Bus Driver w/3 State Output |
| DIR-56-24 | | IC SN74LS373 | 2 | Octal 3-State D-Latches | d |
| DJR-56-25 | IC SN74LS8377 | 1 | Octal D-Type Flip-Flops |
| DJR-56-26 | IC SN74S161 | 3 | Schotkey 4-Bit Binary Counter with |
Direct Clear }
| DJR-56-27 | IC MB10105 | ] | Triple 2-3-2-Input OR/NOR Gates | ' |
| DJR-56-28 | IC MB10116 | 1 | Triple Line Receivers | i |
| DJR-56-29 | IC MB10124 | 4 | Quadruple TTL-to-ECL Translators | ||
| DJR-56-30 | IC MB10125 | 3 | Quadruple ECL-to-TTL Translators | ||
| DJR-56-31 | IC MB10136 | 1 | Universal Hexadecimal Counter | ||
| DJR-56-32 | IC 2716 | 4 | 2048 x 8 Bit EP-ROM | ||
| DJR-56-33 | IC MB7074 | 2 | ECL-RAM (MBM10422) with |
Radiator Fin
| No. | I Name of Parts | Q'ty} | Remarks | FOB Japan | |
| DIR-56-34 | IC 2732 | 2) | 4096x8BitEPROM | = | —_ |
| DJR-56-35 | iC MB93419 | 1 | 64 x 9 Bipolar RAM | ||
| DIR-56-36 | IC MB8114 | 2 | 1024 x 4-Bit Static MOS RAM | ||
| DJR-56-37 | IC MB8148L55 | a | 1024 x 4-Bit Static RAM | ||
| DIR-56-38 | ! IC 24810 | 1 | 256 x 4-Bit Bipolar PROM | ||
| | DIR-56-39 | > Resistor Array | 4 | RNSA-O9P-551J B-device 5102 | ] | ||
| | DJR-56-40 | : Resistor Array | 1 | RNSA-O9P-102J 8-device 1kQ | ||
| DJR-56-41 | | Variable Resistor | 2 | 50k2 1/3W | |||
| DJR-56-42 | Resistor (Carbon) | 2 | 10k22 1/4W + 5% | ||
| DJR-56-43 | Resistor (Carbon) | 12| | 5102 1/4W45% | ||
| DJR-56-44 | Resistor (Carbon) | 2) | 15k 1/4W 5% | ||
| | DJR-56-45 | Resistor (Carbon) | 4) | 2.2kQ 1/4W25% | ||
| i DJR-56-46 | Resistor (Carbon) | 2 | 4.7k9 1/4W 25%, | |||
| | DIR-56-47 | Resistor (Carbon) | 1 | 22k2 1/4Wt5% | ||
| DJR-56-48 | Resistor (Carbon) | 1 | 27k 1/4W 25% | ||
| DIR-56-49 | | Resistor (Carbon) | 24) | 1k 1/4W45 | ||
| DJR-56-50 | Electrolytic Capacitor | 2 | 220uF 16V | a | - | |
| DJR-56-51 | Electrolytic Capacitor | 2 | lp F 50V | ||
| DJR-56-52 | Ceramic Capacitor | 1 | 47pF 50V | ||
| ! DIR-56-53 | Ceramic Capacitor | 128) | 0.0luF SOV | ||
| DIR-56-54 | Ceramic Capacitor | | | 33pF 50V | |||
| DIR-56-55 | Ceramic Capacitor | 2 | 10pF S0V | ||
| DJR-56-56 | Ceramic Capacitor | 4 | 220pF 50V | ||
| DJR-56-57 | Ceramic Capacitor | 2 | 68pF 50V | |||
| DJR-56-58 | Ceramic Capacitor | 1 | 330pF SOV | ||
| | DIR-56-60 | Polyester Film Capacitor | 1 | 1000pF SOV (102kz) | |||
| DJR-56-61 | Polyester Film Capacitor | 1 | O.1uF 50V | ||
| DJR-56-62 | Polyester Film Capacitor | 1 | 0.022uF 50V | ||
| DJR-56-63 | Transistor | 2) | 28C1215-R/S/T | ||
| DIR-56-64 | it | 61.44MHz (HC-18U) |
3, CPU P.C.Board
| ame | of Parts | . | 7 | FOB Japan | |||
| No. | _ | _Name of a | Qty | Rermarks | _ | —_ | per pe, |
| DJR-57-00 | CPU P.C.Board | 1 | Complete Set (TKG4-11-CPU) | ||||
| DJR-57-01 | IC SN74LS00 | 2 | Quadruple 2-Input Positive NAND | ' |
Gates
| DJR-57-02 | iC SN74LS02 | 2 | Quadruple 2-Input Positive NOR |
Gate
| DIR-57-03 | IC SN74LS04 | 6 | Hex Inverters | | |
| DJR-57-04 | IC SN74LS08 | 1 | Quadruple 2-Input AND Gates | |
| DJR-57-05 | IC SN74LS32 | 1 | Quadruple 2-Input Positive OR |
Gate
| DIJR-57-06 | IC SN74LS74 | 2 | Dual D-Type Edge-Triggered Flip- |
i Flop w/Set and Reset -
| DJR-57-07 | IC SN74LS86 | 1 | Quadruple 2-Input Exclusive |
' OR Gate
| DJR-57-08 | IC SN74LS123 | | | 4 | Dual Retriggerable Single Shot |
| DJR-57-09 | | IC SN74LS125 | i | Quadruple 3 State Bus Buffers |
| DJR-57-10 | IC SN74LS132 | 1 | Quadruple 2-Input NAND Schmit |
Triggers
| | DJR-S7-11 | IC SN74LS138 | | | § | 3-to-8-Line Decoder/Demultiplexer |
| DJR-57-12 | IC SN74LS 139 | 1 | Dual 2-to-4-Line Decoder/Demulti- |
plexer
| DIR-57-13 | IC SN74LS157 | hod | 2-to-I-Line Data Selectors/Multi- |
fo : - _ plexers -
| DJR-57-14 | IC SN74LS164 | 2 | 8-Bit SerialIn Parallel-Out Shift |
Register
| DJR-57-15 | IC SN74LS174 | 3. | Hex D-Type Flip-Flop |
| DJR-57-17 | IC SN74LS240 | 4 | Octal Buffer/Line Driver/Line Receiver} |
' w/3-State
| DJR-57-18 | IC SN74LS245 | 1 ' Octal 3-State Bus Transceivers | |
| DJR-57-19 | IC SN74L5259 | 3 | &Bit Addressable Latches | |
| DJR-57-20 | IC SN74LS367 | 6 | Hex Bus Driver w/3 State Output | |
| 1DJR-57-21 | IC SN74LS373 | 3° | Octal 3-State D-latches |
| DJR-57-22 | IC SN74LS629 | 3. | Voltage Control Oscillators | |
| » DJR-57-23 | \ IC MB8114 | 6 | 1024 x 4-Bit Static MOS RAM |
| DJR-57-24 | IC 2704 | 3. | 8192 x 8-Bit EP ROM |
| DJR-57-25 | IC Z8GA | 1 | 8-Bit Microprocessor |
| DJR-57-26 | IC 24810 | 2 | Bipolar ROM 256 x 4-Bit | |
| DJR-57-27 | IC 8257-5 | 1 | DMA Controller |
| DJR-57-28 | IC 2732 | 1 | 4096 x 8-Bit EP ROM |
| DJR-57-29 | IC MB8884 | 1 | 8-Bit Microprocessor |
| DJR-57-30 | 1C MB3614 | 1 | Lower Power Quadruple Operational | ~~ |
Amplifiers
| DJR-57-31 | IC 3192 | 1 | Custom |
| DJR-57-32 | IC DACO8CO | 1 | 8-Bit Digital-to-Analog Converter |
| DJR-57-33 | IC CD4020B | 1 | 14-Stage Binary Ripple Counter |
FOB Japan
| c | Name of Parts | Q’ty | Remarks | per pe. |
| ; DJR-57-34 | Transistor | 4 | 28C1815 | |
| | DJR-57-35 | Transistor | 1 | 2SC1384-R |
| | DJR-57-36 | Transistor | 4 | 28C828-P/O | |
| DJR-57-37 | Transistor | 2 | 2SA564-P/Q/R | |
| DIR-57-38 | | Diode | 10} | 18953 |
| ' DJR-57-39 | | Diode | 1 | WO3B |
| | DIR-S7-40 | | Dip Switch | 1) | BSA |
| DJR-S7-41 | ; Aluminium Electrolytic Capac- | 2 | 470nF 16V | | |
itor j
| DJR-57-42 | Electrolytic Capacitor | 1 | 220uF 16V | : | |
| DJR-57-43. | Electrolytic Capacitor | iT | 33uF 16V | ||
| DJR-57-44 | Electrolytic Capacitor | 3) IF 50V | |||
| DJR-57-45 | Electrolytic Capacitor | it | 4.7uF 50V | ||
| DJR-57-46 | Electrolytic Capacitor | 2 | 3.34F 50V | |||
| DJR-57-47 | Electrolytic Capacitor | 15 | 10nF 16V | ||
| DIR-57-48 | Electrolytic Capacitor | 2 | 100uF 16V | ||
| DJR-57-49 | Electrolytic Capacitor | 3 | 47uF t6V | 7 | — |
| DIR-S7-50 | Ceramic Capacitor | 3: | 0.0684F 25V | - | ||
| DJR-57-51 | | Ceramic Capacitor | 82) | 0.01luF SOV | ||
| DJR-57-52 | Ceramic Capacitor | 1 | 0.022uF 25V | ||
| | DJR-57-53 | | Ceramic Dapacitor | 2 | 22pF 50V | ||
| i DIR-57-54 | Ceramic Capacitor | 2) | 0.47uF 25V |
!
| DIR-57-56 | Polyester Film Capacitor | it | O0.01uF 50V |
| DJR-57-57 | Polyester Film Capacitor | 1 | 0.22uF 50V | |
| DJR-57-58 | Polyester Film Capacitor | i | 0.0224F SOV |
| DJR-57-59 | Polyester Film Capacitor | 1 | 0.00474F 50V | |
| DJR-57-60 | Polyester Film Capacitor | 2 | 0.12uF 50V |
| DJR-57-61 | Polyester Film Capacitor | it | 0.056uF 50V |
| DIR-57-62 | Tantalum Capacitor | 3 | 10uF 16V |
| i DIR-57-63 | | Tantalum Capacitor | 1 | 4.7uF 16V. |
| DJR-57-64 | | Tantalum Capacitor | 2 | 22uF 16V |
| DIR-57-65 | Series Resistor Array | “3 | 1k PNSA-O9P-102) | |
| DJR-57-66 | Parallel Resistor Array | 6 | 689 PNSB-08P-680J | |
| j DJR-S7-67 | | Series Resistor Array | i | 4.7kQ PNSB-O9P-472J |
| | DIR-57-68 | | Resistor (Carbon) | 6 | 47kQ 1/4W 45% | |
| - DJR-57-69 | | Resistor (Carbon) | 2kQ 1/4W 25% |
DIR-57-70 | Resistor(Carbon) |S | 4, 7k. 1/4W 5% |
| DJR-57-71 | Resistor (Carbon) | 10kQ 1/4W +5% | |
| DJR-57-72 | Resistor (Carbon) | 7 | 100k. 1/4W +5% |
| DIR-57-73 | Resistor (Carbon) | is | 1kQ 1/4W+5% |
| DJR-S7-74 | Resistor (Carbon) | 2 | $.6k2 1/4W 45% |
~ 15 -
FOB Japan No. Name of Parts Q’ty | Remarks per pe.
| DIR-S7-75 | Resistor (Carbon) | 1 | 1202 Wawes% | |
| DJR-57-76 | Resistor (Carbon) | 1 | 1502 1/4W £5% |
| DJR-57-77 | Resistor (Carbon) | 2 | 20K 1/4Wt5% | |
| DIR-57-78 | Resistor (Carbon) | 1 | 150K 1/4W £5% |
| DJR-57-79 | Resistor (Carbon) | 1 | 30K 1/4W 45% |
| DJR-57-80 | Resistor (Carbon) | 1 | 43K 1/4W +5% |
| DJR-57-81 | Resistor (Carbon) | 1 | 13K 1/4W 25% |
| DJR-57-83 | Resistor (Carbon) | 5 | 68 1/4W 45% |
| DJR-57-84 | Resistor (Carbon) | 7 | 330Q 1/4W 45% |
| DJR-57-85 | Resistor (Carbon) | 2 | 33kQ 1/4W 45% | |
| DJR-57-86 | Resistor (Carbon) | 4 | 2202 1/4W t5% | |
| DJR-57-87 | Resistor (Carbon) | 5 | 4702. 1/4W 5% |
| DJR-57-88 | Resistor (Carbon) | 1 | 6802 1/4W +5% |
| DIR-57-89 | Resistor (Carbon) | 4 | 1002 1/4W £5% |
| DJR-S7-90 | Resistor (Carbon) | ! | 2002 1/4W +5% |
| DJR-57-91 | Crystal Oscillator | 1 | HC-1 8U-182 (6.000MHz) |
RS) DS EIEIO DEB OEE ERE EO
- Power P.C.Board
| No. | Name of Parts | Q'ty | Remarks | FOB Japan | |
| DJR-18-01 | (PP-78) Power P.C.Board | | | Complete Set | ; |
| | DIR-18-02 | Transistor | 1 | )28c3555 | [ |
| DIR-18-03 | + Transistor | 2 | 2SA817 | ||
| DJR-18-04 | Transistor | i | 28C2535 | |
| DJR-18-05 | Transistor | I | 2SA1015 | |
| DJR-18-06 | Fast Recovery Center | 1 | | CTU-2s | : |
Tap Diode
| DJR-18-07 | Shot Key Diode | 2 | CTB33S | ||||
| DJR-18-08 | Silicon Rectifier Diode | | | S4VB40 44 400VW | |||
| DJR-18-09 | Silicon Reetifier Diode | | | 1B4B4] | |||
| DJR-18-10 | Hybrid IC | 2 | 3D-1001 | ||||
| DIR-18-11 | 3 Terminals Regulators | | | 7824 | ~~ | ] | |
| DJR-18-12 | 3 Terminals Regulators | 1 | 7812 | |||
| DJR-18-13 | | Thyristors | | | | SP4M | |||
| DJR-18-14 | Thyristors | 1 | 03P05M | |||
| DIR-18-15 | Diode | 4 | 18954 | |||
| DJR-18-16 | Diode | 4 | 10DF-4 | |||
| | DIR-1817 | “Photo Coupler | 1 | Pcol4 | _ | |||
| DJR-18-18 | Zener Diode | 1 | OSZS.6U | |||
| DIR-18-19 | Zener Diode | 1 | OS5Z5.1L | |||
| DIR-18-20 | | Zener Diode | __ | 1 | OSZ5.6Z _ | . | bd |
| DJR-18-21 | Ceramic Capacitor | 3 | DE0707B471K2K 470pF2KV | |||
| DJR-18-22 | Ceramic Capacitor | i} | O.IMF 50V | |||
| DIR-18-23 | Film Capacitor | 3. | MDD2J473M 0.047MF 630VW | ||||
| DJR-18-24 | Film Capaci | 2 | O.OIMF SOV | ||||
| DJR-18-25 | Film Capacitor | 2 | 1000pF 50V | | | ||
| DIR-18-26 | Aluminum Electrolytic Capacitor. | 1 | |1000MFS0OV. | - | ||
| DJR-18-27 | Aluminum Electrolytic Capacitor, | 2 | 47MF 35V | ||||
| DJR-18-28 | Aluminum Electrolytic Capacitor] | 7 | 47MF 16V |
DJR-18-29 Aluminum Electrolytic Capacitor) 4 | 3300MF 10V
| DJR-18-30 | Aluminum Electrolytic Capacitor| | 2 | 100MF 25V | ||
| DJR-18-31 | Aluminum Electrolytic Capacitor] | 5 | IOMF 16V | |||
| DJR-18-32 | Aluminum Electrolytic Capacitor] | 2 | | 330MF 200V | ||
| DJR-18-33 | Aluminum Electrolytic Capacitor} | 1 | {OOOMF 25V | _ | | |
| DIR-18-34 | _|_Resistor (Coil Winding) | 1 | 200HM 2W | / | ||
| DIR-18-35 | Resistor (Carbon) | 5 | IK OHM %4W:5% | ||
| DJR-18-36 | Resistor (Carbon) | 8 | 51 OHM 4Wt5% | |||
| DJR-18-37 | Resistor (Carbon) | 6 | 12 OHM #W+5% | ||
| DJR-18-38 | Resistor (Carbon) | 1 | 470 OHM 4W+t5% | ||
| DIR-18-39 | Resistor (Carbon) | ] | 22 OHM Ws 5% | ||
| DIR-18-40 | Resistor (Carbon) | 2 | | 20K OHM 4Wwe5% | _ | t |
| No. | Name of Parts | Qty; | Remarks | side ta |
| DJR-18-41 | Resistor (Carbon) | 1 | 1LO0OOHM 4W | ||
| DJR-18-42 | Resistor (Cement) | 1 | 200HM SW | ||
| DIR-18-43 | Resistor (Metal Oxide) | 1 | 510 OHM 3W | |
| DJR-18-44 | Variable Resistor | 2 | 50K OHM GFO6P | ||
| DIJR-18-45 | Variable Resistor | 2. | 2K OHM GFO6P | ||
| DJR-18-46 | Shunt Resistor | 2 | SmOHM | ||
| DJR-18-47 | SC Coil | 1 | SC-02 | |
| DJR-18-48 | SF Coil | 2 | 100MH SA | ||
| DIR-18-49 | SF Coil | 2 | 800MH 2A | ||
| DJR-18-50 | Oscillator Transformer | 1 | EC-35 Type 3D-0097 | |
| DJR-18-51 | Oscillator Transformer | 1 | EI-30 Type 3D-0097 | ||
| |_DJR-1 8-52 | Oscillator Transformer | 2 | EB-16 Type 3D-1000 | ||
| DJR-18-53 | Fuse Element | 1 | FGMB 4A 125V NR Type |
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
PRINTED IN JAPAN ©1982 Nintendo of America Inc.