TDV-2115L
Tandberg · 1976 · tdv2115l
No documentation yet. Nothing in the collection covers this machine. What's here comes from MAME 0.289. If you have a manual, a schematic or a wiring diagram for it, send it in.
Documents (0)
No documents for this machine.
Hardware
- CPU
- —
- Audio
- Beep
- Display
- raster 783×350 @ 50.49 Hz
- Players
- 1
- Controls
- keyboard · 99 btn
DIP switch settings (17 banks)
ACK/NACK/ENQUIRY lamps
| Setting | Switches |
|---|---|
| Reset with CLEAR key (default) | |
| Reset with SYN ctrl-char (^V) |
Rx handshake source
| Setting | Switches |
|---|---|
| DSR (default) | |
| DCD |
Operating mode
| Setting | Switches |
|---|---|
| TTY mode (no CPU) (default) | |
| CPU mode (CPU module required) |
DTR/RTS signals
| Setting | Switches |
|---|---|
| Affected by LINE/TRANS keys (default) | |
| Permanently asserted |
ON LINE lamp lit when
| Setting | Switches |
|---|---|
| Only if both RTS and CTS (default) | |
| RTS regardless of CTS |
Automatic page-roll after end of page
| Setting | Switches |
|---|---|
| Off | |
| On (default) |
RS-232 data length
| Setting | Switches |
|---|---|
| 8 data bits | |
| 7 data bits (default) |
Horizontal space between chars
| Setting | Switches |
|---|---|
| Duplicate edge of previous char (default) | |
| Draw gap |
Automatic CR+LF after end of line
| Setting | Switches |
|---|---|
| Off | |
| On (default) |
Display mode
| Setting | Switches |
|---|---|
| Undeline mode | |
| Attribute mode (default) |
Cursor blinking
| Setting | Switches |
|---|---|
| Off | |
| On (default) |
Hide Attribute-changes or Underlined chars
| Setting | Switches |
|---|---|
| Off | |
| On (default) |
Unused
| Setting | Switches |
|---|---|
| Off (default) | |
| On |
Hide ASCII control characters
| Setting | Switches |
|---|---|
| Off | |
| On (default) |
Cursor shape
| Setting | Switches |
|---|---|
| Block | |
| Line (default) |
Automatic RTS with DTR
| Setting | Switches |
|---|---|
| Off (default) | |
| On |
Current-Loop RxD line (Unused)
| Setting | Switches |
|---|---|
| 10V zener-diode in series | |
| 47 Ohm series resistor (default) |